ReelSteadyGO for ANY VIDEO 😲

[@AlbertKimTV]

How to stabilize any video with ReelSteadyGO and Blackbox data. I'll add update video links below at a later time. Get ReelSteadyGo (w/5% discount) - bit.ly/2V3291L Watch Tutorial Part 2 here - kzbin.info/www/bejne/fX_ShGCCab6Vaqs Watch 1440p flight - kzbin.info/www/bejne/mZjYgXdmqd6sb5o Facebook Group - facebook.com/groups/fpvtools/ BlackboxToGPMF github.com/Cleric-K/BlackboxTo... GUI Tool - github.com/Cleric-K/BlackboxTo... Blackbox Explorer - github.com/betaflight/blackbox... FFmpeg - ffmpeg.org/download.html Upscaled AU mp4 file from 1440x1080 to 2704x2028 in FFmpeg and also reduced frame rate to 30fps. RSgo would not process the 60fps output (shooting mode not supported error). If I used anything else to upscale the footage, the process in BB2GPMF would produce a 0mb file. Used Blackbox Explorer to sync the gyro data with the video file and to find the beginning and ending offset values for use in BB2GPMF. After I processed the file in BB2GPMF, it converted the file to 29.97fps. I used the Session 5 2.7k 4:3 profile, 15 degrees cam angle. Hero 6 profile would not work. ffmpeg.exe -i 1.mp4 -vf scale=2704:2028:flags=lanczos -r 30 2.mp4 pip install numpy==1.19.3 🙏 Please support with a 👍 and don’t forget to hit the 🔔 thanks! 👉 Old gear for sale here - bit.ly/AlbertGearFS 💲 Get the latest exclusive coupon codes (updated often) bit.ly/34SYiGn

[@johnk8825]

Knowledge is never useless, so I watched any way. If I get ReelSteady in the future I'll come back and watch again

[@AlbertKimTV]

Thanks for watching!

[@winder6]

Well said me too

[@damianklaassen8760]

Yes this is my excuse for watching KZbin everyday at least 3 hours

[@blam3329]

I’ve been asking RunCam for this. I’m so stoked about the development of this. You could have a Split Nano on a 75mm whoop and get stable video with 4 minutes of flight time. Thanks for covering this man!

[@quadwings66]

Yeah excited about this! But are there a lot of whoop fc’s out there that have onboard blackbox ?

[@blam3329]

@@quadwings66 good point. Maybe there will be. Betafpv is pretty good at listening and responding...

[@Sircleanfpv]

@@quadwings66 most 5in1 don't, but JHEMCU toothpick boards have them and they're dirty cheap

[@AGILISFPV]

Intrested to see the new SMO camera with this to see how it looks

[@wiebel1991]

Nice to see a video on this. Yes its far from a stable "product" but its good that more people hear about it. especially "we" need more devs working on it. Like gyroflow for example, a reelsteady go replacement which works with any camera or even with the Insta360 (SMO) built in gyro data.

[@nikfpv3456]

Wow this could be a game changer some day. I've been dreaming of this feature. I'd love to see someone try it with a high end camera.

[@ulightme]

Thank you Albert for taking interest in this project ... I think it's awesome that this exists. Perhaps RealSteady Go team will notice and incorporate the ability to stabilize video out of NON GoPro cameras using external gyro log recorders?

[@gvngoheavy]

Thank you thank you for digging in and sharing! Definitely the future.

[@DroneOn]

When I heard about it, I read up on it looked at closely and said to myself I'm just a little to busy now I will revisit in a few months. Maybe it will progress by then. I think this is a great start.

[@jordannovek2911]

I would like to use it with a cheaper camera like the Runcam 5 or Orqa. Cheaper than a gopro. Hope it works. Thx

[@_ShaDynasty]

Great video! but also makes me so frustrated that go pro discontinued the only good fpv camera that works with ReelSteady "session". And no other alternatives exist without doing this highly complex process.

[@ChrisParayno]

this sounds amazing to use with micro cinewhoops that have a built in HD recorder!! Also great point on the goggle dvr with the dropped frames.

[@badassdrones778]

whaaaat ?! genius idea ! it would be interesting to know if our fc gyros are more accurate than gopro ones. however I guess since RS has been bought by gopro company, next version of gopro app will have RS steady stabilization options (that would be great).

[@badassdrones778]

humm having a second thought about this... For this to work well, gyros has to be as close from the camera as possible and thus be subjected to the same shakings whichisn't the case on most of my quads... May be some smart business dev could sell a dedicated tiny gyro module you can fix on your camera that will then give RS exactly the data it needs... (and even get rid of sync points hassle on the same occasion !) I would buy it ;)

[@ragulkarthikeyan4379]

Steady XP is doing this already. And their own software

[@MindSoulandSpirit]

Amazing! Have you tried it with the SMO 4K camera yet?

[@AlbertKimTV]

I haven't but I've heard other people have with success.

[@MCsCreations]

Wow... That's really fantastic, Albert!!! 😮 Thanks a lot for the video! I hope this project gets more attention from the open source community! Stay safe there! 🖖😊

[@deadlazlo]

Albert, great video. Looking forward to trying this out.

[@taterfpv]

Thanks Albert. This looks promising!

[@Lozoot2]

I wonder how difficult it would be to extract gyro/accelerometer values and map them to a transform in Blender or Resolve? That could be a nice alternative to RSGO

[@AlbertKimTV]

I wouldn't know. Perhaps someone else can answer?

[@elvin7921]

It's possible and that's how the proof of concept for what became Gyroflow was done: redd.it/hor0nw and kzbin.info/www/bejne/Z329pp6vaMqcr5Y . The main problems from using the "raw" data in blender/resolve is the lack of any kind of sync or lens distortion information.

[@eliasreisinger3630]

This is so cool I tried this somehow myself and it never worked thanks Albert and great work.

[@jimbaylor6863]

Reminds me of the early days of trying to work with open source software development tools. It all works, but not as easy as you thought it should be... But great video. Thanks.

[@Reecefpv]

This is awesome I'm so close to be able to afford a computer to get reelsteady go so I can get that last little bit out of my videos.

[@danysainz-gootenberg7809]

Thinking about if this could be useful for hero 7 footage if it gets more refined

[@AlbertKimTV]

People are already using this for Hero 7 footage.

[@manuel_herrero_fpv]

Hello, I wanted to ask you if this system could work quickly and easily with the runcam thumb pro, since you already have the gyroscope file. I know there is the gyroflow but I like the stabilization of the reelsteady better.

[@AlbertKimTV]

You would need to convert the gyro data and I don't know of a way to do that.

[@manuel_herrero_fpv]

@@AlbertKimTV Ok, thank you very much fot your answer.

[@daniloassuncao5873]

Hello Friend. i'm trying to use this tutorial but i think i have a problem with the file provided by the flight controller. all tutorials I've seen, blaclbox files then in .bbl. my controller writes the files in .bfl. I believe that by recording the files in .bfl, I am not able to generate the video to use ReelsteadyGo

[@AlbertKimTV]

Sorry, I'm not sure what that is.

[@Douglas-hj3fe]

Hi there Mr. King ...can i use this software for any camera Brand footage or Just Go Pro ????

[@AlbertKimTV]

It will work on any video that you can properly format.

[@trevorimpulsebuyguy6398]

Honestly I dont do much video, just flying for the fun of it but still 👍 man I actually learned some stuff thanks.

[@AlbertKimTV]

No problem 👍

[@spoedman]

That’s awesome!

[@littlefrogyboy1]

Does this work on mac os?

[@AlbertKimTV]

I've heard it's possible with emulators or virtual machines but I don't have any mac stuff so haven't tested it myself.

[@QuickSticks8771]

Hi there Im hoping you can help After GoPro splits files into 4GB folders and I render each clip separately in reesteady then rejoin in post it never aligns properly and skips frames yet if I rejoin in QuickTime or premier pro it re renders and corrupts the metadata making it unusable for reelsteady As the files are only 5 or so minutes in duration often the best shots are in the middle of these joins and get ruined I cant seem to find a way to rejoin the sections of the same file so reelsteady can render the entire clip This must be a problem for anyone who flys for longer than 6 minutes with a GoPro yet there is no one addressing it am I missing something ?? any tips to resolve this would be much appreciated

[@AlbertKimTV]

Solution is here... bottom half of the page... I have not tried this myself. Looks kinda complicated! gopro.github.io/labs/control/chapters/

[@QuickSticks8771]

@@AlbertKimTV Jesus yes it does!! Is this really what every one in the community who flys more than 6 minutes has to do to run RSG without glitches ? Maybe some uber clever FPV KZbinr should make a video for all the thousands of people that are frustrated by this !! Just sayin! :}

[@ragulkarthikeyan4379]

Can dslr cam video also could be stabilized?

[@AlbertKimTV]

Yes, however, keep in mind RSgo is also accounting for the wide angle lens distortion from a GoPro so if you use a narrow lens on your DSLR, your results will be strange.

[@ragulkarthikeyan4379]

@@AlbertKimTV got it thanks 🙂👍

[@freeloader700]

Okay this is pretty cool

[@quadwings66]

Awesome !! Been looking for this

[@43shawn43]

At what rate do you need to log for the blackbox recorder?

[@AlbertKimTV]

1khz

[@m7mds91]

yeah it's really cool

[@BmoreVisuals]

Always great content, right to the point! No bs. This is interesting definitely not reliable enough yet but a great step in the right direction!

[@truog2003brasilia]

Hi, for me it works ... thanks.

[@enarramore77]

great video!

[@truog2003brasilia]

Cool

[@beechFPV]

I was trying this but had so many issues. I couldn’t get Python to run.

[@AlbertKimTV]

I tried version 3.87 and that worked. Version 3.9.x didn't work for me.

[@checkeredflagfilms]

imo the RS workflow is arduous, burdensome and a general pain in the ass for something that imo shows incremental improvement from GoPro or other camera stability offers. why bother unless your spielberg's hire.

[@ValFPV]

Now we only need a free reelsteady go alternative :(

[@AlbertKimTV]

There is something called gyroflow that is in the works but it's being developed by a student so progress is slow.

[@elvin7921]

@@AlbertKimTV soon™ :)

[@ValFPV]

@@elvin7921 are you the guy behind gyroflow? :)

[@elvin7921]

@@ValFPV aye. I'll try to get another alpha version out in maybe a week or two with compiled binaries and proper documentation/tutorials.

[@ValFPV]

@@elvin7921 that would be nice! I'd need a tutorial :) In theory, couldn't something like this work with phone cams as well since, you know, they have gyros?

[@SuperGamer133]

"If you don't have reelsteady go this video is completely useless" just search reelsteady go 1.0.20 crack on reddit and thank me later 😉 been using it for months now. can't wait for the free alternative I've seen on the Facebook groups to come out

[@SuperGamer133]

@@overratedsrtchallenger they probably do but hackers don't care lol

[@AlbertKimTV]

Not cool to promote stealing software dude

[@SuperGamer133]

@@overratedsrtchallenger yup no virus im using the cracked version on my latest video on my channel

[@RYVENANT]

The guy who created reelsteady is a drone pilot and he is one of the pioneers of running a naked camera on a whoop, effectively creating cinewhoops. It's like stealing from one of the family. I could understand if you wanted to try it and then buy if you liked, but there's a trial man, there's no need. Imagine you slaved away coding for weeks at a time just to have someone steal all your hard work. Digital or not-- it's stealing someone's property. If you use it a lot, at least CONSIDER buying it to show support. It was just on sale for like 2 months too, was $60. That's when I grabbed it.

[@ingrownnipple]

If you can't afford reelsteady go then just don't use it. It's not that expensive for what you're getting and you're supporting one of our own