Removing A Chimney From The Middle Of A House | THE HANDYMAN |

Go pick up a new shirt like the ones warn in this video. thehandyman.store/
Play list for this project series • Old House New Heating ...
This is the business management app I use to run my business go.getjobber.com/thehandymanb... Let me know how you like it.
Custom Knife For Alphas only alnk.to/9mmDQVf alnk.to/goYX5z2
The rest of the story / thehandyman
My business channel • I Ain't Got No Work | ...
Find me on Patreon and send me a message or a question You can also watch all the live streams there / thehandyman
Dewalt Oscillating tool to cut the wall amzn.to/3Nemf31
Impact driver amzn.to/2tT3mvV
Combination Square amzn.to/3Jmi7wx
Adapters for your impact to sockets amzn.to/3v332cn
My instagram / the_hand_e_man
My business channel. • I Ain't Got No Work | ...
The only place to get official Caulk Gun gear thehandyman.store/
Dewalt bit kit amzn.to/3LKLaIL
My new boots bit.ly/3F9dMJS
The Red and Yellow Mallet amzn.to/3NfwGBL
Banjo drywall tool. amzn.to/3INmDT9
Fiberglass drywall tape amzn.to/3oGeE1T
My fancy jumpsuit make sure you get size XL amzn.to/3GlK44A
My respirator amzn.to/3Bgovi5
It is $3,000 in one hour.
My amazon store to find all my tools www.amazon.com/shop/thehandyman1
Waxfree toilet flange gasket amzn.to/2wfMaTu
This is where It happens amzn.to/2CdCMOb
Tool belt suspenders: amzn.to/2znzJSG
Suspender loops: amzn.to/2znm3HC
table saw amzn.to/2eNrqKK
Impact driver amzn.to/2tT3mvV
Tape Measure amzn.to/2sXxAcg
Tool Vest amzn.to/2u2gIGo
Utility Knife amzn.to/2tWLK1A
Mini nail puller amzn.to/2sXux4b
PVC pipe cutter amzn.to/2t5XJe
Camera amzn.to/2rCdXc3
Tripod amzn.to/2KccAri
Cell phone amzn.to/2wF74fg
Cordless multi tool amzn.to/2Ke3j2a
Hammer amzn.to/2rBh9ob
Wood glue amzn.to/2I9tFpq
Work shoes amzn.to/2I9RAVV
Cordless angle grinder amzn.to/2wy9ETY
#thehandyman #thehandymanbusiness

[@TheHandyman1]

First Go pick out a nice shirt or hat. thehandyman.store/ Play list for this project series kzbin.info/aero/PLpy7a6cc133hIsuUFCSCEkq65yOFbrCvk

[@theogangryscotsman7607]

i would help my dad with projects like this! he didnt bucket the bricks he slid them down the roof to us kids to catch... those were the days

[@Jack_of_1_Trade]

If you could catch a brick, you could catch a dodgeball

[@joshharrington5904]

🤣

[@bobbybobbo2359]

Mm. K.😂

[@gideonkroll5573]

My brother, I always love the way you end your videos😂 it means like people to have some conclusion or blooper but no. Not the handyman, straight to the point and I love it.

[@robertcypress1699]

Thank you for sharing

[@RapidRepair]

Job well done Handyman 👍🏼👍🏼

[@dosadoodle]

That's just like what I did with my chimney on our new old house. Except my chimney was in such terrible shape that I could see through it from the side and could just pick bricks right off it. And the internal clay channels had cracked into smaller pieces. I'm looking forward to taking it all the way down to the basement this winter!

[@markarita3]

Underside of that roof looks identical to mine! Boards used for foundation forms. Didn't waste anything back then! House was built in '78 btw.

[@TheRealBozz]

I've got one of these on my old house. It is surprisingly hard to find videos (that aren't from Britain) on doing this. Thanks.

[@mickfaragher7897]

Awesome work.

[@Reese_Young]

Yup attic has to be the worst part of it. I did the same thing I. My house and ya glad the attic didn’t take to long lol. Great video once again handyman!

[@terencemerritt]

I have that same Dewalt hammer drill. It’s a nice tool

[@michaelplays2449]

Great video !!!

[@brandonjensen5292]

Handyman da 🐐 no 🧢

[@inscrutianaII]

I went with a steel roof a few years back and it just always seems either too hot or too cold to hang out inside my attic and then inside my walls deconstructing an old chimney to the foundation slab. Somehow there is always something else to do!

[@mattcasoni]

Thank you handy

[@Jack_of_1_Trade]

Love your foot action with the flu

[@robertlivingstone3947]

Good job

[@TheOriginalMrB]

I need a magic bucket that never gets full just like The Handyman! *Typed that in my chipmunk voice…

[@robbyrabit]

Did the same thing to my house in Florida. But the roof was redone, so I had them remove down below the roof deck, I took care of the rest and gained a bigger closet space.

[@yogoombah2356]

Good time to install an attic exhaust fan?

[@KableGuyCGY]

Nice caulk gun Handy!

[@youtubehandyman]

Good job bro

[@akaredcrossbow]

With today’s codes they want an air gap between the flue tiles and the brick. That allows too much expansion and contraction, so the flue tiles fail much faster. The chimney you’re working on has the flue tiles against the brick, and the flue tiles didn’t fail, just the mortar that connects the tile joints because of the age. Goes to show you the old timers knew what they were doing. The exterior brick might’ve need to be repointed more often from the expansion and contraction, but I’d rather have to do that instead of replacing the liner.

[@doctorwork]

That part where you were reaching through the hole to take the bricks off of the attic section reminded me of the scene in How the Grinch Stole Christmas, in which he takes the log from the Whos' fireplace after taking everything else, including their last can of Who Hash. You went a step further and took the whole darn chimney!

[@mariap.7907]

that was great - I have a chimney in my attic also and I have to remove it - its a really old one like from the 1950s - so it should come out easy. did you put a skyview in your chimney from that hole? that's what I would have done to get some ventilation in there. is that possible if I do this to mine? to get natural light into my attic area, in the event I ever need to access that area again?

[@spacewolfjr]

My parents did this too when I realized the truth about Santa Claus!

[@denismanace]

That's crazy.

[@anthonyb8405]

i had to do almost the same thing at my house. Definitely sucked hauling all the bricks out bucket by bucket.

[@robertlowe7431]

Any update on when the last live stream will be up on Patreon?

[@buffydog21]

My chimney has become obsolete, because I have 96% efficiency furnace and I have a tankless water heater. I wished, I would've got it years ago. Normally, I would be using 15+ CCF and I'm using less than 10 CCF. My chimney is only being used to attach the tankless water heater to in basement.

[@tachyonpulses625]

Thanks for this video! We have a larger fireplace (about 2x the size) in the middle of the house I'd like to remove. Our's goes through the cathedral ceiling directly through the roof which I imagine would make it easier to remove. At the peak is a beam running the length of the cathedral ceiling. However, the non-roof side angles down to our 8ft flat ceiling height so I imagine this is not load bearing which would be my main concern. Are all 'middle of the house' chimney's non-bearing? Thanks for any advice.

[@iUniverzX]

At least you have your safety shirt on lacking all the rest 😂 kidding great job handyman

[@brentnearhood8874]

Hay Handyman! You should be wearing gloves!!!🔨

[@JesterStrike]

That chimney came out easy. I did one a couple years ago and it was built like a tank. I needed a lot bigger demo hammer drill to bust the bricks loose. I also kept running into pockets of dumped mortar and concrete. Oh, another thing, spiders love brick walls, especially Brown Recluse.

[@dommyboysmith]

We find alot of mice skeletons too. If there's any gap at all they WILL find it (and die in it 😁)

[@dustinderolph3542]

The flue liner section came out super easy. Are they not mortared in by adhering to the brick? Also the sections aren't mortared together?

[@JesterStrike]

@@dustinderolph3542 I was talking with a bricklayer friend and he said they should be mortared together, but there are a lot of lazy bricklayers out there that shortcut whenever they can.

[@JoelRieger87]

What type of bit were you using? Nice video.

[@malbo4273]

Your best video 😂ever

[@BamaBreeze]

Great show Handy. BTW had a new granddaughter on Friday. Can’t wait for her and I to watch Handyman shows together. HandyOn

[@TheHandyman1]

Congratulations.

[@smarro71]

Thats exactly what I did couple of weeks ago on my 100 year old house here in NJ. And only because it ran in the middle of a bedroom 😂. Great video

[@JK-Handyman]

At 12:10 minutes you pulled the last metal chimney stack out and dust went everywhere, you started sneezing and I pulled my shirt over my face lol.

[@DWIL2307]

You need a half wit helper My uncle always had one as a full time handyman himself. Really nice hard working fellas.

[@bobbybobbo2359]

Why not a whole wit helper?

[@lorenforkgen8339]

@@bobbybobbo2359 probably cause his nephew was cheaper

[@mst3kfan13]

I love my caulk gun sweatshirt.

[@michaelsparks6084]

So my wife and I decided to demo the fireplace in our little retirement home on a Portuguese island we recently bought. Little did we know the Portuguese mix kryptonite with their mortar! Long story short, we subbed that out! 😅

[@mariap.7907]

do you have their recipe? it would be good to have kryptonite when needed.

[@michaelsparks6084]

@@mariap.7907 lol😂

[@billybm0]

This seems like a monster job to take on. Hope it was worth it for ya.

[@scottfiresign953]

What is the tool you're using. Is it a mini jack hammer? Works great.

[@rebeccaberg6677]

What tool are you using to break up the mortar?

[@TRUMP_WAS_RIGHT_ABOUT_EVRYTHNG]

im about to embark on an absolutely absurd remodel on our home. we have a 900 sq ft ranch with a monster 2500 sf addition already (still not completed) now we have to add a 2nd story to the ranch LOL FML i have to take down a massive whopper of a chimney to save a lot of $$. i came here for support :() and now im subscribing because that shirt is just friggin awesome! thanks for the video! though im still gonna ask my army brother if he has any det cord left over LOL

[@shanewarren7567]

Oh masonry demolition is where the submariner comes off! I was wondering where you draw the line

[@TheHandyman1]

LOL.

[@Natural-Causes]

Heat billowing out, I guess you need to have them pay you to install end vents now.

[@TheHandyman1]

On the list. It has some small end vents. It doesn't have soffits.

[@DarinMcGrew]

First, congratulations on NOT reenacting the story told in "The Bricklayer's Song" (The Corries). I'm sure you can find it on KZbin... Second, it was interesting watching this happen intentionally. Back in 1989, after the Loma Prieta earthquake, our neighbors' chimney just vanished above the roofline. All the bricks had collapsed into the chimney and fallen into the firebox. (In retrospect, I wonder what happened to the flue, but maybe it broke apart and was at the bottom of the pile of bricks.) Third, when you reached the roof and started removing shingles, flashing, etc., I had a gut reaction of, "Oh no, don't do that!" Then I realized that I've watched you repair roof leaks and worse before, and that you've certainly got everything under control.

[@mib20000]

a quick and dirty slide made of plywood and 2x4's would have made quick work of the bricks off the roof into the trailer

[@johnsonjay60]

I have to do this next week. All the way from roof to crawl

[@thomasholland7981]

I’ve heard that dropping the bricks down the chimney as you go is the preferred method. Any cons to that technique?

[@james6794]

seems fine for slab on grade but this house in the video has a basement and the chimney goes to it so youd have to haul all the bricks back up to ground level

[@TheHandyman1]

I plan to use this method some when I get to the kitchen.

[@chrisryu4742]

im gonna hide in the chimney if a tornado approaches my house

[@nick_the_greek77]

The real question is what was the handyman looking for? (last 10 seconds of the video)

[@josephfra2456]

What is the Dewalt tool you are using, an air hammer? Good video. Thanks

[@TheHandyman1]

Dewalt ssd.

[@josephfra2456]

@@TheHandyman1 thanks

[@josephfra2456]

On the Dewalt website, ssd doesn’t pull anything up. What does ssd stand for?

[@bradsturm1130]

Is that a recip saw with a masonry chisel?!?! Where can I find that chisel blade?

[@cliffpalermo]

SDS tool

[@spacemonkey2915]

That's a Chisel hammer

[@bradsturm1130]

@@cliffpalermo Thank you!

[@bradsturm1130]

@@spacemonkey2915 Thank you!

[@Yug1tht]

How much should I charge to remove it chimney like that

[@user-qv6ud2hx6f]

What was the reason for removing nice chimney ?

[@TheHandyman1]

make room for a furnace and to get the chimney out of the kitchen.

[@golfclash2035]

Handyman get a helper. Your back will thank you.I know you won’t and the reasons but still.

[@Straight_White_Fatherly_Figure]

We never do. Until we need to.

[@HaroldRutila]

I have this same situation going on in a 1940s house I am renovating. A couple of contractors acted like this was an impossible feat! (I never hired them.) Looks like a great project for next spring before we do a full gut on the inside. But yes, to clarify for the naysayers…it’s next to impossible to update the floor plan when you have a 4’ x 4’ chimney stack protruding straight through the middle of the floor. It prevents wall relocations and would require the kitchen to continue to be a small 1940s kitchen, which is not ideal today. If you can remove the chimney, you can reconfigure the floor plan however you like.

[@MyDIYAdventures]

Bee there, done that, made a vdeo! LOL

[@timothywielebski7945]

Serious question. Why bother to remove the chimney? I know when customers have requests you oblige but was chimney leaking or... ??

[@Fivemonthslater1]

I’m wondering the same thing!

[@TheHandyman1]

For a modern fix and flip or full house renovation Its necessary. The old chimney that use to service the old boiler system goes through the middle of the house and takes up a lot of space. It has to be removed. A new furnace needs to go in its place. This chimney goes right down through the kitchen. A huge pantry cabinet will go in its place. This is not a fire place chimney. There are 2 other chimneys that service the fire places. This customer will make close to $600,000 profit on the flip.

[@cantgetright742]

Least you got a hole to stick your head out of and “cool down”

[@JW77]

I can't do these without gloves.

[@raya7]

I want to remove my unused chimmney stack to make more room for solar eventually. Anout how much would having this done cost?

[@TheHandyman1]

I will reveal the cost at the end of the video series.

[@lifewithphoenix7972]

How much does this cost?

[@tachyonpulses625]

I can't speak for Handy but we had a quote for $8-10K which is why I'm looking at doing it myself. I have lots of 'handyman' experience just not doing this kind of work. Guess, I should mention it was for a fireplace.

[@Aepek]

Hey handyman, how much asbestos think been breathing and touching 😉 ¹ Also big hole, no biggy, slap so,e foam or glue and put ¼ ply over it😉¹ ✌🏻 for being in article crawl space in summer heat, there w/ ya feeling the burn👊🏻 ¹ (fyi…..running handyman joke for all the new ppl out there)

[@darylmiller8911]

But...... Whhhhhhhhyyyyyyyy Handyman

[@thomasholland7981]

No gloves???

[@TheHandyman1]

No need for gloves.

[@theogangryscotsman7607]

handy you are crazy! i would hire me some Guatamalians they have hooved feet like a g d goat! mexcans are too heavy and too expensive

[@pipingcalifornia3476]

You are doing that completely wrong! Chemicals are known to the state of California to cause cancer!

[@tvue2322]

Why not wear gloves and a mask?