Bosch Dishwasher Circulation Pump Replacement

[@sebastiantevel898]

Thank you for the video. I used it to replace my pump, which in Manhattan is a 700$ repair. So just 200$ for the pump and a bit of work was a no brainer. My Dishwasher is a fully integrated panel ready model and actually it was not necessary to remove the front panel at all, to have access at the bottom housing. So for those who have a fully integrated panel ready model, do no waste time with the front panel. Also mine is a model produced around 2006 and it had a Pex clamp on one of the hoses which required a strong snip tool ( for steel studs) to cut it off, and then I had replaced it with a regular screw one.

[@elfuacaton]

I just finished replacing my Bosch circulation pump and I saved $500. Thank you!

[@nutgrower2957]

Super helpful! My circulation pump impeller came apart and the dishwasher would not wash. It would fill and pump out, the capacitor would get warm and there was a very quiet hum, but not much else happened. The circulation pump would turn in one direction but then would lock up after a couple of turns in the opposite direction. New impeller and seal kit and away it went! It was installed in 2002 and this is its first hiccup. Not bad for a family that runs the dishwasher 3-4 times a week! Way to go Bosch! Thank you for the great video.

[@carolstrickland6979]

Thank you for this. My husband was able to repair our machine with the help that this video provided. Blessings

[@tednich1]

I just replaced the pump in my Bosch dishwasher using this video. It is great! The instructions were simple and straightforward; I didn't have but one problem. The door pulleys were troublesome because I pulled the frame to far and they came out of their mounts. Otherwise, this was a few hours on a Saturday to save a bunch of bucks. My advise is have lots of towels, sponges and buckets ready because there is water that comes out of the washer from every place possible.

[@lasvillas62]

Great instructions. We had an extra part surface and replayed the video and found it to be vibration suppression for the circulation pump assembly. Thanks, saved me hours of disassembly time!

[@JohnMcLaughlin48]

Thanks for sharing. This helped me fix my Bosch dishwasher (11 years old so I know I am pushing my luck).

[@repairclinic]

You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!

[@trippsterling]

Awesome video. Very well created and I was able to follow it step for step. Thanks for not just saying reverse the process to reassemble! Once again I was able to continue to keep the Bosch dishwasher running. I highly recommend repairing versus replacing.

[@rutheaston8253]

Tripp, newer appliances tend to have shorter lifespans due to built in obsolescence/profit margin. Also when we fix an older appliance and keep it running, we are helping the environment by keeping this stuff out of land fill.

[@sebastiantevel898]

@@rutheaston8253 True. Yet it has more to do with the appliances being more energy and noise efficient, therefore they need to use lighter materials. Anyway these dishwasher once you replace the pumps every 10/12 years, can go on another 12. Not bad at all.

[@gwingatetx]

Easy to follow and the new pump fixed my problem. Thanks for putting this together!

[@jerryschaaf541]

Thank you so much for the fine instructions! Without your video I would never had been able to change the sump of my Bosch dishwasher which just had gone out of guarantee. Thank you also for making the video without music. Everything was very good to understand and to see!!

[@repairclinic]

Good work!

[@jasomers]

this pump is almost half cost of a new unit. I resigned to throw my unit away, and then I decided to try and see if the pump was salvageable. low and behold, I see that the pump impeller has wear parts on it that decoupled it from the motor rotor. some gorilla glue and few swears and it was back together. worked like charm. this pump is a good example of a well engineered failure mode.

[@RC-cs3me]

Really interested in your comment. Going to try this at the weekend. Which Gorilla glue did you use? Any tips to minimize my swearing 😀

[@RC-cs3me]

Realise now you can hit the impeller housing with a hammer and get to the broken impeller. Just wonder how long a glued one will last? Thanks for the tip!

[@costoncheatham7025]

I do appreciate the video. My dishwasher is a Kenmore Elite 630.16309404. From the symptoms, I was pretty sure the circulation pump had gone bad. The system would add water and heat it, but there was no circulation of the water whatsoever. Apparently the Kenmore is somewhat different. It has a metal sleeve on each side that most be removed before you can disconnect the pulley's on each side. I could not find a video that shows that, but I figured it out. You have to remove two screws on each side at the front of the washer to be able to remove those sleeves. Almost everything else is the same with the exception of no clamp on one end of the pump itself. Anyway, I was able to put the new pump in, but it still doesn't work. The difference now is that I can hear that the pump is trying to work. I think the old pump must of burned out because maybe there's an obstruction somewhere. Since the pump is not pushing water as it should, I'm not trying to run it so as not to burn out the new pump. I checked inside the washer and the impeller moves freely. I placed an air pump on the end where the lower wash arm is removed and blew air threw. It blew water out of the opposite end, so that's free. Today, I plan to go back in and remove the complete sump assembly to examine every possible entry/exit; that is unless there's a better way to go about troubleshooting. If there's is something, I'd appreciate the advice. Thanks.

[@lynnealvarez7613]

We love your video. Had no problem installing pump. However, now the tube that is on the side of the dishwasher is not connected. Where does that tube connect in the base of the dishwasher. it is still attached at the side of the washer and is in a channel on the back of the base. Thanks.

[@repairclinic]

Typically the wires that supply power to the motor are black and white or white with a tracer, meaning a colored stripe, on it. It is best to find the wiring diagram of the unit. The wiring diagram is usually behind the lower control panel rolled up and tucked in the base assembly.

[@repairclinic]

We're happy to help!

[@himberrys3251]

the description was perfect ! Thanks

[@keithscott2062]

Very helpful video! I just fixed mine and saved a bunch of money

[@repairclinic]

Is there good water pressure getting to the dishwasher?

[@wirekat]

Thanks for the video. There were a few more details on the SHU6805UC but the video was an excellent start. I replaced the circulation pump/motor and so far so good.

[@stevemoores3265]

Great video, subscribed. The arms have stopped rotating on our Bosch, there's water flowing from them but I suspect not enough pressure to push them around, I can hear the pump running. I'm going to follow this video to check for blockages in the pump.

[@stevemoores3265]

Pump impeller was clogged with debris. Works perfect again after following this video.

[@Jason-it9xb]

Thank you very much for the clear instructions !

[@Sgbehm]

Great videos and fast parts delivery, broken part replaced quickly , parts people very helpful , knowledgeable and patient

[@repairclinic]

Fantastic!

[@patriciawilliams8763]

I replaced my circulation pump and also the water inlet on my bosch dishwasher and it still just hums. It won't pump water. Could you please let me know what else could be wrong? Thank you and Thanks for all your informative youtube videos.

[@repairclinic]

It is in the rear of the dishwasher. We actually have a video showing how to replace it. If you search KZbin for "cznkSoTR4u8" it will pop up (that is its video ID on KZbin).

[@repairclinic]

We recommend using the repair help section of our website (link in the description). If you enter your model number there you'll have access to part, model and symptom specific repair help. We hope this helps!

[@WhiteLakeDan]

Great video. Thanks. Q: I get water going in the basin but there is no pressure to it. Is the circulation pump the one and only thing that can be bad? Is there maybe a relay or coil that could be faulty (the water inlet coil/valve works fine) Cheers

[@rasimhaciyev1644]

Great video 👍👍👍

[@Bob-kp5ll]

Is there a way to test the motor before buying a new one? My dishwasher quit circulating water and there was the scent of burnt insulation. Would hate to replace the pump and find out that the harness was the problem.

[@finsonfarm]

at 3:10 in the install video, it says to remove the screws on the frame, but it is not clear if it is on both sides of the frame, or just the right side.

[@finsonfarm]

FYI to those who are trying this, it is indeed both sides

[@robelliott5900]

One word, Perfect.

[@repairclinic]

That's awesome! Congrats!

[@repairclinic]

There could be a few different things going on. We recommend using the repair help section of our website (link in the description). If you enter your model number there you'll have access to model, part and symptom specific repair help.

[@finsonfarm]

What is the function of the small styrofoam block above the soap release that can be seen at 2:51 of this video? Mine has come loose and I can't figure out exactly where it is supposed to go, and if it only attaches with the stickiness that is on one side. thank you for any advice.

[@repairclinic]

+finsonfarm Probably just for sound dampening.

[@WhiteLakeDan]

Thanks for the reply. Indeed, there is normal pressure going in (same pressure as before when it did work, really).

[@answilbrink8934]

How do I get the rubber ring in place again?

[@ClownCarCoup]

this at 6:35 is described as a _fill hose._ Isn’t it a _drain_ hose?

[@RepiTion830]

Can anybody please explain to me what the terminals are labelled. The bosch dishwasher I am trying to repair at the moment has 3 terminals and a capacitor similar to this. I want to test the wiring to make sure the motor is receiving power before spending a considerable amount on a new pump. Thanks

[@repairclinic]

If you go to our website (link in the description) and put your model number in the search box, a list of parts compatible with your washer will come up.

[@brackcycle9056]

Useful Video . ..... I found it as mine refused to finish its cycle .. Followed the initial extraction in video & Turned out a water leak had flooded the tray & there is a float on the left side which drives a red cut out rod .. The leak came down to the salt container that come loose with the big "nut/ring" that bolts it to the bottom of the tub ( under the screw cap) .. ... Other faults we have had .. Blocked filling pipe , the one under the front panel. & No Heat.... which was a burnt out relay in the controller board in the door. ... Hope this comment helps some one some day.... Otherwise Bosch seems fine ...Daily run for 20 years & counting...

[@richardbirks]

Fantastic instructional video. Certainly saved me a huge amount of pain when it came to disassembly of my Siemens dishwasher. In the UK the "circulation pump" seems to come as three parts. The motor, the pump and housing, and the capacitor. I've just gone to all the trouble of replacing the motor element and the dishwasher worked for all of 15 minutes before stopping again with exactly the same symptoms. My question is: is the capacitor used to accumulate enough energy to "bump start" the motor from stand-by. Is it possible I need to replace that as well?

[@repairclinic]

Richard Birks The capacitor cold be for run or start and newer models often use a run capacitor in the motor circuit to reduce power consumption.

[@siaagsga7135]

Capacitor is just to start . If its not starting itself then the problem with the capacitor. To make sure if you can get a way in to motor area try to turn the motor bye hand (when the brain of the machine send to signall to run) it may run. If it runs then you need to replace capasitor to solve the problem.

[@dontpuckwithme9845]

My bosch model SHX33A05UC/14 dishwasher was filling, but wasn't pumping water, so I replaced the circulation pump. very helpful video. However, now the dishwasher will not fill and it only hums. Based upon another person's comment, it's not the water inlet valve. What else could be the problem?

[@pimpybra]

Just used this to repair my Bosch, great step by step, thanks a ton!

[@sdavid1616]

Thanks a lot for this professional video. very clear and helpful!

[@connyhallstrom59]

Hi and thanks for a great video, i have a problem with my Bosch silence plus SKS62E22EU, it works but it started to sound rrrrrrrrrrrrrrrrrrrrrrrrrrrr when it dishes, no wrong codes no nothing, ivé cleaned it and checked the pump impeller, what do you think it is?.

[@dengood1]

Good to know. I only took it apart TWICE today and have been troubleshooting all day to find out I have the wrong part. Ugh. So I won't be able to get this other one to work at all??

[@repairclinic]

Did you order that part from RepairClinic?

[@dengood1]

***** No, and I apologize for my rant. The reason I didn't purchase it from RepairClinic is because I am on a fixed income and the same part was $40 more on your site. Don't get me wrong, I love your site, and the videos are great, I used your site to identify the correct pump and shopped around for what I could afford. I guess I'll try to sell the new pump on Ebay. After further diagnosis, it seems all I needed was a seal kit after all. It works great, it just leaks. Do you price match? If so, I will use your site excuse for my repair needs:) Thanks for replying, and I apologize for my open frustration.

[@dengood1]

*exclusively, not excuse....

[@repairclinic]

dengood1 Thanks for the additional information. No problem about the expression of frustration. We understand. If you had ordered the part from RepairClinic, we would have refunded you immediately, as the error was in our website's results. Thank you again for bringing that to our attention so that we could fix it. For the future, keep in mind that RepairClinic has a 365 days return policy that enables customers to return a part for a refund on the cost of the part within one year of the order. This includes electrical and installed parts. Sometimes, RepairClinic is not the lowest cost option for certain parts. However, our customers tell us they choose us because of our generous return policy, our customer service track record and our free online troubleshooting and repair help resources. Our pricing is set based on pricing to us from the manufacturers. Sometimes, our pricing is among the lowest available on the web. If you haven't already, consider signing up for our free VIP email list, which provides email with frequent discount codes. The link to sign up is in the description of this video.

[@dengood1]

***** Will do, thanks. I never even looked at the return policies of either place. Live and learn!

[@marcolotti3446]

I need to replace the capacitor cause circulation pump is noisy. Is it a 10 pF capacitor?

[@dengood1]

It gets better. Now I can't return the one I got because it has been connected! Although I appreciate the the videos very much, this error on your website listing the incorrect pump has cost me $168 dollars.

[@repairclinic]

Replying to this comment, too, so that it may help others. If you had ordered the part from RepairClinic, we would have refunded you immediately, as the error was in our website's results. Thank you again for bringing that to our attention so that we could fix it right away. For the future, keep in mind that RepairClinic has a 365 days return policy that enables customers to return a part for a refund on the cost of the part within one year of the order. This includes electrical and installed parts. Sometimes, RepairClinic is not the lowest cost option for certain parts. However, our customers tell us they choose us because of our generous return policy, our customer service track record and our free online troubleshooting and repair help resources. Our pricing is set based on pricing to us from the manufacturers. Sometimes, our pricing is among the lowest available on the web. If you haven't already, consider signing up for our free VIP email list, which provides email with frequent discount codes. The link to sign up is in the description of this video.

[@dmatukian]

I am having a pump issue (I think) on a Bosch SHX5AL05UC/06. Dish washer starts with a loud humming, then stops 10 seconds in. Then starts another of those loud humming cycles only to stop directly after with a beeping signaling 'clean'. I read somewhere to open the washer door during that second humming and sure enough it works every time I do that. But I want to fix this to work correctly. How can I be sure this is a circulation pump issue (like I've seen in forums)

[@rickhoupt6933]

I have an issue its not removing all water ive cleaned filter, cleared disc hose, checked check. Still have problem

[@ahmedbayoud6781]

Thank you very much , very processional video

[@kenslattery8783]

I have a Bosch Ascenta dishwasher that is dripping water from the inside left sidewall. It works fine otherwise. If I run it for a minute and press cancel, the water drains away. I just need to know how to fix the dripping issue.

[@kennyrichard1167]

Why does the front panel need to be removed to replace the pump?

[@steveloux4709]

Because you need to access the panel behind it and remove it. It actually isn’t that big of a deal.

[@johnr.1592]

I'm having a hard time figuring out if this part (now updated to 00442548) will work for my 2011 year SHE8ER55UC It's a super efficient dishwasher, and I don't have the bucks at hand for a new $2400 dishwasher.... can anyone confirm if this part is nearly universal for this era of dishwasher?

[@billymac123454321]

Very impressed with this video My Bosch dishwasher is white but otherwise looks identical It is washing but not very well I have removed all the pieces from inside the dishwasher, and removed all debris When I run the dishwasher and open the door quickly, the water semms to be pumping very weakly. It only shoots up from the outlet of the sump about 4 inches Is there any better way to tell if the pump is weak or what cold be the cause>

[@repairclinic]

There could be a problem with the circulation pump, but there also could be something clogging the dishwasher elsewhere. Check all the hoses and wash arms for clogs and also check the water pressure to the dishwasher.

[@AshleyMillsTube]

they should really sell all the parts to the circulation pump, complete waste to replace the whole motor assembly for some warn bearings in the top bit

[@kirkfinch2160]

I have a Bosch dishwasher. It seems to stop with the bottom full, and the button shows active. It acts like it stops it mid-cycle. When I cancel all and restart it drains fine but stops. I just turned it off and went from auto to express wash. It seems like it may work this time. Any thoughts?

[@repairclinic]

Kirk Finch It is normal for a dishwasher to leave clean water inside the sump to help keep the seals wet. Stopping in the middle of the cycle could be a control board issue.

[@pauljackson3661]

I have a Bosch dishwasher model - shx33a05uc14fd8211-bosch- and my dishwasher was not draining. I checked the drain pump and all seems fine, I cleared sum debris from the lines. But now that i put it back together its not turning on. Humming noise and there are 4 wires i only seem to recall that two were connected but now i'm second guessing my self. There a dark green and purple line loose. The lights on the panels not turning on.The humming tells me its getting power though. PLEASE HELP ...!!!!

[@repairclinic]

Paul Jackson There should be a wiring diagram somewhere in the dishwasher (in the control panel or behind the lower kick plate) that can be used to double check the wiring.

[@jitenanita]

Could you help me with IFB Neptune dishwasher? It keeps on draining after first cycle and does not switch to next cycle. I saw a video of other brand dishwasher that has water level mechanism which gets clogged and does not come to desired level to trigger next cycle. Please help. If you already have a video on it please let me know the link. Thanks.

[@repairclinic]

+jitenanita We would need the model of your dishwasher to see what type of drain mechanism you have. Keep in mind the drain hose has to be higher than the water level in the dishwasher or the water will keep siphoning out. Watching our how it works dishwasher video may help: kzbin.info/www/bejne/d4HHmX6CrtdqqZY&feature=player_embedded

[@jitenanita]

+RepairClinic.com Thanks for the reply. The siphoning of water is not the problem as the machine was working properly till a fortnight back in the same condition (setup). I have IFB's Neptune dishwasher as mentioned earlier; if there is anything more specific to be furnished please let me know.

[@repairclinic]

+jitenanita If the control does not cycle the dishwasher through the drain, fill, and wash cycles properly than the control is likely defective. Without a model number we are unable to tell you what type of control you have.

[@Sgbehm]

RepairClinic.com ndiagnose scirculating pump

[@joycebentley4247]

my Bosh dishwasher doesn't empty and the water just come out of the bottom.could you advise the problem please. doe not leak while washing

[@repairclinic]

+Joyce Bentley On our website, we describe the potential causes for a dishwasher that won't drain. Enter your model number to get causes specific to your model. www.repairclinic.com/RepairHelp/How-To-Fix-A-Dishwasher/26---/Dishwasher-won-t-drain

[@joycebentley4247]

+RepairClinic.com hi don't have a model number its a EXXCEL AUTO OPTION MAXXFREEDOM PERFORMANCE

[@repairclinic]

+Joyce Bentley It's possible that your dishwasher's drain hose is clogged. We recommend checking the drain hose first.

[@joycebentley4247]

+RepairClinic.com I have got the pump working but it is now stuck in that mode ?

[@repairclinic]

This could be a few different things. I'm going to send you an article that will be helpful.

[@ZdenekPhilipp]

Water pump witch is ok replace to new water pump with is ok replace to new water pump, because it is simplest. I have a E23 error and water pump working. It could be only sensor error water pump

[@dariodagostino8809]

I have a Bosch dishwasher It remains stuck in a loop (I think that water discharge) even if I open the door (usually here you should stop any operation). In addition, the display is in error (188 and all LEDs on) and does not work the Reset buttons

[@El_Scorcho_]

Dario D'Agostino 3 years too late, but just in case someone else comes across this. Sound like you may have a leak. The bottom panel has a float switch that activates the drain pump.

[@smbrenner]

dishwasher arm barely moves and shoots water maybe two to three inches. Sounds like a circulation pump problem, right?

[@repairclinic]

This should help please click here: kzbin.info/www/bejne/d4HHmX6CrtdqqZY

[@SgtMantis]

And now you have a brand new plumbus.

[@karengray5348]

I have tried everything to fix the smell coming from my Bosch yes everything! so if the smell is the pump not working which pump do you believe it would be the circulation pump or the draining pump, it only happens when I first start it but it awful and it smells as if someone farted in the entire house!

[@repairclinic]

The circulation pump is most likely not your problem. If the pump was bad the dishes would not be getting clean. If all the water is not getting out at the end of the cycle that water will sit in the bottom and start smelling. There should only be about an inch of water in the bottom of the sump at the end of the cycle. If the unit is not draining properly look for a kinked hose or a restriction in the drain pump or hose. If the unit drains ok try using powdered soap. If the dishes sit in the dishwasher for a few days and are not rinsed off well that will also cause an odor at the beginning of the cycle. Using a dishwasher cleaner like glisten once a month or so will help keep the dishwasher components clean and help prevent bacteria buildups. Glisten: www.repairclinic.com/PartDetail/Dishwasher-Cleaner/5304482929/1915432?TLSID=1773

[@magiccatdancing]

***** Have fixed the tubing so that is not it, and even if I wash the very next day, there is no smell in the washer it only happens when I turn it on and the smell radiating from the sink is awful and it only happens when I start that Bosch, it also leave the film on my dishes, I took pictures of it and it can be smeared like wax. I use Cascade complete in it the little pockets you put in the door and I use the spot remover, evne the light in the spot remover has stopped working and it is only 5 yrs old. to expensive to keep this thing going. too expensive to buy one new. I have to wash the plastic plates and plastic sontainers and all aluminum otr stainless by hand after putting in the DW, ridiculous! I have pictures but I do not know how to put them on here.

[@repairclinic]

Karen We would love to help you figure this out. Can you send an email to [e-mail]? You can attach those pictures as well.

[@magiccatdancing]

***** Will do please watch for magiccatdancing at beginning of email address.

[@magiccatdancing]

Karen I really appreciate this.

[@LucaAndrei]

And still some people disliked the video. I wonder what reasons they might have.

[@yourbugtokillagain]

They want you to come fix for them.

[@joaquinfernandesgarcia3269]

3:52 Be prepared for some water to spill out

[@joaquinfernandesgarcia3269]

0:58 Be prepared for some water to spill out

[@BG-fx8ce]

Is this a common problem on Bosch dishwashers?

[@steve51158]

SAFETY GLOVES?

[@davecullen7744]

you make a 15 min job too long just undo rh screw front and back release door spring lift until front support leg sits on bas rim then do job from the side .12 yrs at bosch

[@RC-cs3me]

Top tip! 👍

[@salaam2u921]

Here is an easier way to replace the heat pump : kzbin.info/www/bejne/eHykgqCnbrKDhJo

[@RS_Redbaron]

$282.23 then sending cost. For 400 euro a hole new dishwasher.

[@chowmurphy]

This pump is around 400$ how is even worth doing when you can buy a clearance or sale one for about 600$!?! Wtf

[@camjus5]

How can I tell if the circulation pump is the problem with my dishwasher. Repair man thinks so. It's a big repair job/cost. The problem is that after the dishwasher tab dispenser opens, the dishwasher tab no longer dissolves. Have run the dishwasher on all settings with and without dishes. Dishwasher is only 13 months old. Bosch model : shx4at55uc/14

[@repairclinic]

First, make sure you have enough water. You should have approximately an inch of water above the screen for the pump to work properly. If the pump is not running, you can pull out the screen and use either a 7 or 8 mm socket or nut driver to see if the impeller will turn. The access will be through the hole on the right side in the sump. If the impeller does not turn, you can keep trying to turn it until it breaks free the seal may be stuck. If you cannot break it free, you may need a new pump. If it turns free, the impeller may have seeds in it and not pumping or it may not be getting power. If you hear a slight humming noise in the wash cycle, but the water is not spraying the motor is most likely stuck

[@ImanBRad]

What am I doing with my life ?

[@danjohnston8146]

Very clear video but I would still screw it up. I wish I was born handy instead of handsome.

[@jamesau2232]

40