Repairing Someones Mistakes On A Yamaha 15hp 2 Stroke

[@sniper117332]

I think that we must look for the blades of the impeller inside the channels of the engine.They can disrupt cooling stuck inside.

[@peterpace2463]

Mate... love your work. I try to watch all your videos!! I’ve learnt heaps thanks.

[@ecflocator9598]

Just picked up a 2004 9.9hp yamaha 2 stroke that has had one tank ran through it after seeing how much you like em. 15hp reed cage going in.

[@worldpeace32]

Seeing the missing impeller, I wonder what the original complaint was

[@crpth1]

Bad pump impeller is one thing, but no impeller at all... LOL My latest project was a car in which the previous owner in is mighty cleverness decided to replace a flexible brake hose with a brake PIPE... Useless to say and lucky me that it failed (fatigue crack) inside my garage while testing. If it have been on the road someone might have been killed...

[@itsgatlin4035]

4:22 how to wash your bumper 101

[@chrisadventures1642]

How to pee on your bumper lo

[@markandrews2423]

Does that model not require a gasket when replacing the water pump..I didn't see it on the install.

[@coryboyd7958]

I'd really appreciate if you did the proper set up of the idle speed and fuel mixture screw on a yamaha 9.9 2 stroke. I think I have mine finally right but I'd love to see you do it in detail. Thank you.

[@tjitsewenselaar5874]

Do u have a link of the new water pump?

[@Jussi3211]

Hi! I have the same motor and water is coming from the two holes what I assume to be exhaust outcome holes. The motor is working well but I just wonder is it normal that water comes out from those holes (or at least one of those)? The only flaw I know is that the thermostat is stucked to be open all the time. Anyhow, this motor is a marvelous piece of engineering, love it.

[@tomjones1967]

Sweet outboard!

[@theoldwizard998]

That long nut is called a coupling nut.

[@chadheybear]

As always, great videos and information.

[@andrewseeker6970]

Wow! That is incredible. So wish I had this skill set

[@vynleshmynle7372]

Great you fixed a problem that didn’t exist. This guys a genius

[@terryterry7715]

Nice vid mate! I have an unusuall question: Do you know which is the total cylinders capacity? Thank you!

[@vitalhoma2553]

Am pretty sure you got this motor for dirt cheap😅💪🏼good job it’s nice to see hustlers prosper

[@vitalhoma2553]

I thought 💭 I got a deal to one ☝️ time finding out asshole was lying 🤥 through his teeth selling me a motor that was running in salt water and everything u could think is wrong with it😂😩it was, it had blown head gasket warped head it was miss firing Aluminum was completely corroded on the transom and the water pump was completely gone I had to build up the new aluminum welder on and then machine it out, this person made me In the expert on motors😅, I guess I should thank him for that 😂😂But the good thing is the motor is so good now!! What am saying is good job 👍🏽

[@REVIEW_JUJUR]

5:17 is that engine has a light coil as a standart (green wire). I need the light coil to charge my 12v battery (off course i need a retricfier). I just wnna make sure there's a light/charge coil in it before i buy.

[@mrsuarez430]

Yes they do just use a multimeter to find out wicj is ground as they're both the same colors I pulled a rectifier from a 9.9 zuke I had laying around works great

[@spencersmith791]

Where do you buy your motors from?

[@Whalermansteve84]

Nice little motor. I bought a 2006 15 mercury 4 stroke for $1000 with low hours and the pawn shop thought it would never run. Lol. I got the fuel pump and cleaned up the carbs and ran fine. My motor weighs 112 lbs and feels like it weighs 500

[@Huntersprojects]

1000? Holy cow I bought a 80s 3.5 2 stroke for a hundred bucks

[@leonardhirtle3645]

Do the 15hp Yamaha 2 stroke outboards idle slowly for long periods for trolling?

[@elpimpi7135]

Yes they do! All day long if you wish

[@MrJaynotts123]

Have you got any videos on a 5hp.mariner?

[@jjsjaardema5819]

So the threaded collar/coupling that the shift shaft threads into is stuck on my 6hp 4 stroke yamaha. I have WD40d it, tried loosening it and it feels if I crank any harder I'm going to snap the shaft. Thoughts?

[@richardoconnor7162]

That was done for a ground, I had a 225 short out there and start a grass fire sitting on the trailer one day.

[@Highstranger951]

Even two years later that makes no sense

[@richardoconnor7162]

@@Highstranger951 there is a wire to connect to the hull , that was one of the things he could not figure out why it was done. They can short out power and this wire turns in to a glowing hot wire like a fuse and burns off.

[@Highstranger951]

Richard O'connor I watched the video again and I still have no clue what you are referring to. Maybe include a time stamp of what you are talking about?

[@richardoconnor7162]

@@Highstranger951 IT was not a ground wire as need on the larger units was just some bush fix some one did to get it working. On the larger motors there is a required grounding wire motor case to mounting bracket, this I what I had thought would explain the strange fix that was done.

[@Highstranger951]

Richard O'connor exactly what I thought, your comment doesn’t make sense. There was no wire mentioned in this vid and he explained the lost part.

[@sethdrak3]

Honestly the make shift copper connecting bolt was probably fine sometimes homemade shit is the best shit🤷‍♂️i bet he just didn't have any money and thats why there was no impeller because he couldnt replace it so he sold the whole thing for money 😂😂😂

[@ikaikasrgnts8618]

I noticed that it looks like water is coming out from where the lower leg connects to the main motor. Is that bad?

[@jordanlittle5391]

No

[@BluefieldsFisherman]

Eric, what do you have for sell in Yamaha 15-25 hp 2 stroke outboard motor?

[@ThatBoatGuy]

nothing currently any yamaha outboard sells very quick

[@BluefieldsFisherman]

eric edic Do you do private repairs? I have a 1984's mercury 25 Hp XD that needs work. Where are you located?

[@BluefieldsFisherman]

What else do you have in the range of 15 to 25 hp?

[@ThatBoatGuy]

Bluefields Fishing only thing I have right now is a Suzuki 25 HP 4-stroke

[@dwaynemiller68]

Love your channel buddy thank you!

[@quinten5993]

I used to have a 15 hp mercury and it didn't have an air filter but it went super fast. but would this yamaha get more power without air filter? because it can get more and faster oxygen

[@tonyflamescontents3763]

I have the same motor, it start very easily at a slight pull, has great performance on very cool weather conditions, as soon as I cover 2-3km it start breaking fire till I'll let it shutdown for 15-20min before I can continue, especially during very high atmospheric weather conditions it get worse I can't go 700metres, bcos of this problem distance I'm suppose to cover in 20-25min takes me 2-3hrs, Eric please I need your help.

[@tonyflamescontents3763]

2009 yamaha 15hp 2stroke

[@tonyflamescontents3763]

praise be God, I gad mine fixed up 3days ago, Dr problem was d current system, (starting coil) the little coil below the flywheel, my motor is back now n powerful

[@Kootwoot]

Sounds like fuel-starvation caused by either no gas-tank breather, (I guess that you know to loosen the breather on the gas-cap?) or a crack in the duel-line or a perished membrane in the fuel-pump.

[@mrsuarez430]

Hey buddy question did you ever change the oil seals on the prop shaft I having some leaking and trying to decide if i remove the plate becuase it seems easy compared to other ob's having a slot to pull it off with a flat head are shoukd i just screw in some wood screws I think i can do it with little risk to scratching the shaft Thanks in advance

[@frankhileman106]

Hey buddy what's your opinion on a Force by Mercury Marine?

[@richardoconnor7162]

My bad I thought he looped in the wire to the copper fitting. This was a DIY taken apart, then put back together buy some one else. lost some parts so made a bush fix.

[@rbruce63]

That15 Hp Yammie -246 cc, bore 56 mm, stroke 50 mm - compares evenly with my 1969 Chrysler 20 Hp -327 cc, bore 61.91 mm, stroke 54.35 mm, propeller size standard 8 1/2" X 8 1/2". I only wish to know the size of its propeller!

[@ryanharris018]

Ik this video is old but what prop is that?

[@ratoneJR]

lucky they did not smoke the motor without an impeller

[@Athfos]

What propellor are you running on that motor?

[@smannee]

I have the same question. I'm looking for one like that too.

[@jasonixo]

What's the price range for a used Yamaha 15 2-stroke?

[@Crackadick5]

1k-1.5k

[@diogocaldeira2367]

Got a 150 4stroke 300 found it at a scrap yard just needed a new water pump hah

[@osirisblaster]

"They should have just went to home depot." Where exactly do you think they got the copper piping?

[@billgardyne7328]

In a 2 stroke 15hp do you have any particular brand preference re strength and reliability?

[@harveychamberlain13]

Yamaha, mercury, newer Suzuki’s

[@gruntslayer3524]

Lmaooo where did you find a motor without an impeller in it

[@gradybrowning3976]

Looks brand new

[@gorp27]

You need to put a sticker of Calvin, from Calvin & Hobbs on that Yamaha of Calvin peeing on A Toyota badge.

[@Rourkemooney]

Is there a certain way to put an impeller on

[@TM-rx6qk]

Just do what he said in the video

[@Rourkemooney]

No like dose it have to face a certain way

[@henrikmichelsson1729]

Does this Yamaha 2-stroke got autolube or do you have to add oil into the fuel ?

[@justsomeguy1696]

That motor runs with oil in gas

[@RichieRouge206]

I really want one!

[@mohdidrissaid7152]

You are superb...

[@CidFFVII]

Looks like an all thread coupling

[@yousseflahbil679]

If didn't take care of it it well end up losing head cylinder

[@michaelf161]

Hey man I bought a 1999 Johnson 150 it will only run with the choke on carbs and other stuff have been replaced

[@sethgabbard7705]

bass destruction F check needles and float

[@dankoarsic6381]

Hey man, can you say dimension of your propeller? Thank you

[@lazydragonslayer]

I want one of those on my gheenoe 15’4

[@cadewarnke3715]

How hard is it to take apart and clean a 2003 mercury 25hp carburetors?

[@ThatBoatGuy]

pretty easy.

[@cadewarnke3715]

+eric edic any tips? Thanks

[@CiLyXx]

Cade Warnke its pretty easy, just take pictures and keep your bolts and parts in order. The hardest part is getting to the actual carby.

[@kansascityshuffle8526]

Looks like a bush fix that never got properly fixed.

[@roblatty3931]

Do you have the spec numbers for that stainless prop you’re using on it?

[@marcinman9693]

People ruin good motors all the time just by being too cheap or too dumb to just order the correct parts from a dealer or online vendor.

[@jimbogasoline2042]

Damn the previous owners were cheap mofos. Did you go inside the trailer from where u bought it, lol?

[@musicmanthatlikesoldandnew7324]

How can u tell if u need a new impeller my motor pumps water fine

[@mboehm69]

The fins on the impellers harden an retain shape after awhile (few years) then they can start braking the fins off. Best not to even let them get that far an replace every few years. Looking at doing the impeller on my 15hp outboard very soon myself to be on the safe side of things

[@gringoloco8576]

I think typically they recommend like 2 to 3 yrs for impeller. They start to bend and get less effective. Eventually you'll get an overheat if don't replace.

[@davidsirvio7716]

That is called a coupler.

[@timkelly633]

I recently changed the impeller in my yam 25n autolube and now it's difficult to get a true neutral. The gearbox seems to catch slightly unless I have the selector in exactly the right place. I've tried adjusting the connector on the selector rod a few times, but it doesn't seem to help much. Any suggestions? Worked fine before I changed the impeller.

[@ThatBoatGuy]

you need to readjust the shiftshaft. Its pretty easy to do.

[@281lancealot]

good job

[@joshgraves6630]

They did go to home depot

[@vynleshmynle7372]

Call that part a coupling

[@monto313]

You can fix a lot of things but you can’t fix stupid.

[@BManTyler]

rod coupler

[@kahelek7639]

Score

[@koensadventures6159]

hahaha no impeller

[@alnbaba]

I have never taken apart a water pump and found nothing, did they forget to put it back in? Easiest fix ever.

[@papabits5721]

DOH!

[@nevermind8694]

An engine is internal combustion cylinders gas burning and a motor is electric motors are electric motors engines are gas powered in an engine they are similar in design on some things but big difference

[@0462angel]

#outboard

[@masterful7574]

Or not er Your not chur Reverse not ruhverse

[@MrMismith]

George Canvin apparently you find it necessary to correct his grammar and vocabulary on every one of his videos. You obviously have your PHD in English or maybe you are just an ass wipe.

[@masterful7574]

Mike Smith personal attacks and profanity have no place in an adult discussion.

[@MrMismith]

George Canvin what do you consider repeatedly demeaning someone about how he talks if not a personal attack. By the way it’s “W”D 40, the letter not the word “double”. If you consider the word ass profanity then I’ll find other words to call you if you continue to belittle people for the way they talk. Get a life and stop trying to put yourself on a pedestal by belittling people.

[@masterful7574]

Mike Smith if jumping to conclusions was a sport, you would be world champion.

[@lesterkirby3367]

U no what i think.... beening a spanner man all me life ...i think this guy doing the repares... review... on that yamaha 15 hp .. wimped off the gearbox ... leg ..tool out the impella ..and put it all back to geather ... and then stripped it for the review 😕... U can make a youtube review out off nothing...😆...down south.... O the kerrymans this and hes that ....but heed wise up to that one...a bit like putting an engine togeather and and living a hammer in the sump well...oil pan... when U put it back on ...😮... where did i put the dam thing...had it in my hand 5 mins ago 😕....helo from ireland...😉

[@patreynolds7717]

Sometimes you are very difficult to listen too. Like when you think and talk and you can’t string a sentence together too much humming and hawing. And then you can’t remember the names of components it’s just makes it look like your incompetent