Lithium Drill Restoration DEWALT DCD 710 12-Volt Drill Restore

This restoration project took more than one month, during which time it was moved to a new workshop, a larger space for more interesting videos in the future. If you enjoy my videos, please subscribe to my channel, thank you!

[@hgh96]

painting was really a bad idea. After some use ut will chip off and look worse than before painting.

[@francescofabbri9352]

Complimenti bravo e competente.

[@millerfonseca3088]

Top

[@perro_dinamita]

Why the paint? Whyyyy?

[@priyoedits]

How you do it??

[@MrSubword]

It was DeWalt. Now it is Ryobi ))

[@janikkralik]

or fake dewalt from aliexpres :)

[@jorge.ruiz.]

Pense lo mismo jajajajaa .igual la verdad bien ahi en la reparación

[@Cabeza492]

@@jorge.ruiz. Electronica y mecanicamente, impecable. Esteticamente, un asco :P

[@jorge.ruiz.]

@@Cabeza492 el.amarillo en aerosol es muy malo malo malísimo pero vale mucho el trabajo

[@bradenweller2531]

hahaha i thought the same thing

[@woollywoolwoolz]

If you heat the plastic with a heat gun it melts the oils on the top layer and restores it to pretty much new, I've seen it done in car videos for restoring faded bumpers and upholstery, I'd imagine it'll work for these type of plastics too (maybe). Great job getting it work again tho, but I feel it got ruined with the awful paint, I'd strip it back again!

[@Mianus84]

Great Job (except for the paint ;) )! Can you give the name of the spot welder?

[@wondernoodles9394]

I noticed he downgraded from Dewalt to RYOBY 🤣

[@nicecc0411]

@@wondernoodles9394 or Greenworks

[@bobbailey7235]

For 50 plus years I've restored items but never have I came close to the extent of prefection you have done here. You are the best I have ever seen anywhere! Thanks a million for sharing.

[@cesarcoronel4302]

5

[@KK-ol5ov]

Never seen anybody paint a drill before, the paint will come off though right?

[@RGD-Audio-Repairs]

yeah it will.. very easily too. Personally, I wouldnt paint it, if i was restoring it.. There are better methods to restoring scratched and discoloured plastics...

[@Bzzzz1977]

Dewalt in Ryobi colors :) Painting was unnecessary

[@josephinevinluan6180]

;)

[@Robcatist]

Dewalt drills are crap these days bought one 4 days ago and it’s already stuck on hammer action 🙄

[@ivonnevazquez4098]

Hello Could you give me the model of your grease fitting and your welder for batteries? And how does the welder work? It need a high amperage battery? or how does it work? Thanks

[@Rokki_neBalboa]

С цветом совсем не угадал. Больше зелёный чем жёлтый получился

[@dominicforge8899]

Lol, this was like watching a documentary about an abused Donkey that was rescued and now lives happily in a meadow....Great job!!

[@mimicro4802]

This tool is made in china. In china, broken tools calls "break dard". So, after restoration. She has a "dark Yellow".

[@Jasonbourne69]

What happened to that fucking drill

[@thumperman8490]

It is always a good idea to repair things if you can, but as the drill was in such poor condition, it is fair to say the batteries will be shot too, sadly, the time to repair the drill body and the cost of the new batteries makes the whole exercise a financial non-starter. If you then factor in your time at say $10/hour and effort .....you would have been better off throwing the drill away. Good to see the inner workings of a Dewalt drill though. Stay safe.

[@drbass9677]

if you watched the whole video he replaced the battery cells.

[@Maureen-kc4cm]

Then someone steals the drill

[@AMAN-nb5ic]

What kind of welding device did you weld the lithium batteries with and how much the price, please?

[@GMMilambar]

Spot welder. Amazon sells them for exactly that kind of job.

[@Thomas-yy9cz]

Это же как нужно усрать инструмент до такого состояния.

[@kunalchiplunkar]

I thought he would make another body out of epoxy

[@myatelier2685]

Go😂od!!.. Now it's RyWalt !!

[@horacionoguera3400]

Una pregunta amigo tengo un taladro dewalt como ese ,se tranco el mandril y cuando lo destrabe se salio una d las muelas que agarran las mechas ,ese mandril se puede desarmar y colocarle la muela en su lugar ,esta como nuebo.o tengo que comorar un mamdril

[@MORALESJESUS-w5v]

Jenial

[@jhonperalta5263]

Cómo se llama la máquina para soldar las baterías

[@JuanGomez-or5js]

Son herramientas que ya pasaron de tecnología mejor compra lo nuebo,sin resultado economico

[@legion2252]

Красить шуруповёрт ну это колхоз.... Уж лучше оставил бы как есть

[@beom4649]

I'd like to know the manufacturer and model name of the spot welder.

[@juanpadron4333]

Me too

[@dexietyy7922]

Nice one but I don’t think you should paint them it would look better cleaned sanded and maybe a thin coat of clear coat

[@FelinoAnticomunista]

Installing gear with hammer... Bad bad bad... Really bad procedure

[@juliosalazar6492]

Te quedo mismo color que el Ryobi 😂😂😂 pero buen trabajo

[@arnoldozuluagamancilla9459]

Me gustaría saber cómo consigo el de saldar punto gracias

[@rogertyler3237]

I Never Seen Blue Grease What Kind Of Grease Is That You're Using?

[@zihadhossain5169]

ভাই এই ডিল মেশিনের দাম কত পরবে পুরাতুন

[@chengcheng422]

The shell, I think it is better to keep the original style, repaired as old, repainted, very ugly. Sorry, although you've done a great job.

[@vinylhead9938]

Not a fan of a paintjob. It looks like some Ryobi now. Good tools should not be ashamed of battlescars 😉

[@firebladex8586]

who would treat their drill this way?

[@Auriflamme]

Someone probably dropped it off a roof or something.

[@treyjohnson846]

Multiple times

[@justinschutte9127]

Someone who has held an newer drill and knows it is just absolute trash

[@HafizurRahman-mw8bp]

Should've kept the original bright yellow colour even if you repainted.

[@НиколайИвахно-т2с]

Все круто, только покраска корпуса это лажа, лучше оставлять оригинал

[@nacetabeth31]

In the factory where I work mayby there 're 200 or 400 , You can to be Rich , come on to Algeria in Oran

[@Lulanda93]

Always have the gear box in the number 1 gear when breaking the chuck loose. Otherwise you can likely damage the gear box.

[@Lulanda93]

Sheikh Zaid wrong, been doing it for 40 years that way. Was factory train by DeWalt Milwaukee makita etc. that’s the way they do it.

[@dl4871]

Would rather not paint it. Cost too much time and look like a Ryobi/DeWalt combi

[@Ste89Fan]

Был DeWalt стал Ryobi)

[@sergiomendez6508]

Amigo dónde encontró esa herramienta para soldar de puntos . Está muy chévere su trabajo . Me gustó la máquina de soldar si sabes dónde la puedo conseguir le agradezco. Desde Colombia

[@Kmnri]

converted dewalt into ryobi 😂 (color), but great restoration

[@arnulfojasso2258]

Cuanto costaria un trabajo de esos

[@maika0staretza]

You do a hell of a job BUT please stop spray painting !

[@СергейЮхимчук-ж8с]

Нахера ты его покрасил-то?

[@jacksonroad9263]

excellent impressive. for a moment i thought u will repair the motor if you did that would of been epic

[@yedigaryantools3492]

you did a great job but you converted dewalt into ryobi

[@dherostplankton7188]

Aku harap ada giveaway untuk aku😋😋

[@nelchan2421]

is this from DEWALT to RYOBI?

[@ryanpowell9443]

did he just screw that bit of wood to the table you can se by the holes at 28:07 at the bottum left ot the tabe

[@meadarayai7971]

මරු

[@delhoule-ib9fc]

What was that he mixed together? Would like to know

[@eloimis101]

now i see it will be lots of work to replace this stupid bearing!

[@petebutler5139]

To remove the chuck, you smack the Allen key with the hammer. Smack it good too!!

[@thefademanro4874]

Why you painted it? The new paint Is ugly

[@TioRico10]

Amigo como chama essa máquina de solda ponto.Edvandro do Rio de Janeiro Brasil

[@shamoolkhanhorrorchannel5712]

Not grease any part it will soon blown up.

[@armencal66]

Exelente restauración una observacion solo la pintura te quedo mas verde ...adios d walt Bienvenido ryobi

[@haidangdang8049]

mình muốn mua máy từ bạn

[@glynngarner8722]

Dewalt. I would have left it in the bin

[@JuanGomez-or5js]

No manches tu casa

[@bikefit3957]

compa echele a los plasticos desengrasante para motor pa que queden super limpios y no batalle tanto tallandolo con jabon

[@Giancarlo-ol2mu]

Drill reduced to mini terms, not even a dog would have reduced a tool in this state !! Maybe it was better if you bought a new one.

[@Retrovorious]

LoL, You turned it into a Ryobi.

[@RoMa_cRudA]

You made from a dewalt to ryobi

[@ДмитрийДмитрий-у1и]

Цвет поноса детского а так пойдет

[@anodine_org]

Hi! How to disassemble a Dewalt D28210? Impossible for me to replace the spindle. 🤔

[@ЭдуардБахарев-к7х]

Буду знать как свой шурик ремонтировать .

[@LRestoration1]

Nice job!

[@winnerger]

lo felicito! pero podria ser mejor la pintura no es el mismo color y alguna calcomania hubiese mejorado muchisimo la estetica por lo demas excelente

[@aidanwheele6337]

It’s a lithium ion battery... just charge it

[@Christophergriffiths1972]

Looks like a Ryobi now! Lol😂

[@VideoNash]

thanks

[@onlok559]

How do you know how to do all this? I love your videos but when I break something down I get so lost!

[@gilmarfaioli226]

Top esplicacáo

[@ezraredgwell]

Bro made a dewalt into a ryobi

[@irishway1064]

Nice job you are the best 👍

[@jaredstone9487]

Makita yellow or marigold yellow satin is what you failed to paint with

[@ryand3933]

Why ryobi green?

[@LuisCastillo-em5bp]

Exelente canbio de motor saludos desde panamà💪👌🇵🇦🙋‍♂️

[@jhans3278]

Wow! Did you invent the cordless drill? Amazing how you repaired the drill from memory.

[@aicisha]

From his own video, not from memory

[@designermywaist4218]

hardly worth restoring

[@Maureen-kc4cm]

Heat gun the plastic case

[@nacetabeth31]

Thanks a lot very interesting to restore this material That's kind of U ... Tabet from Oran In Algeria

[@robertobezerra8376]

👏👏👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷

[@venkataramanagorle6866]

DC motor kaha milega

[@tringuyentien6351]

Phục hồi làm dì

[@Mr.WellingtonVonDukeIII]

Just got a hand me down DCD710 that needs some work and I've found very little references to its inner workings. Thanks, it's a shame I can't just replace the brushes without changing the whole motor though.

[@gregorsamsa1364]

These look like fun restoration projects. But wouldn't make sense from a financial perspective

[@carlpayne8008]

Thank you very much I actually have the a dcd 710 Dewalt drill

[@juanpadron4333]

What dot soldering You use

[@tuncerkupelifun4448]

Everything is very good, congratulations, but the color turned out to be lemon :)

[@plokijij7856]

Exactly the same thing happened to me rebuilding my dewalt DCD771 drill the torx 20 snapped. Mine isn’t in as bad a condition as yours and scrubbed up good with a new chuck and torx bolt

[@ferdek360]

Ryobi? 😅

[@leonelnivollet159]

quisiera saber como se pide para comprar ese motor, xq tengo el mismo y necesito cambiarlo

[@mrsunelectronics544]

Respekt 👍.... ich tausche halt die Gehäuse Teile, die sind nicht teuer.... auch erst 7St. wieder auf neu Zustand gebracht...