Replace Faulty Blend Mode/Air Flow Actuator | Dodge Dakota 2001-2004 and Dodge Durango 2001-2003

[@willbotto8662]

Well you made hours of researching way easier. Thanks for the video my dude =)

[@B9poy]

i've been searching for two weeks for a tutorial about this issue and this is the only one i could find thank you

[@vitaliksvideos]

I’m glad it helps! Good luck

[@MatiasGomezMusic]

Thank you

[@joelgalenza370]

How do you line the disk up?

[@mikeryen9662]

Has anyone seen a video on changing the Air Flow Actuator on the 97099 Durango?

[@oldgoatgaming]

anyone have a part number for the air flow actuator for a 2003 durango ?

[@israelgastelum3437]

Algun Link de compra? Lo busco pero no encuentro ninguno

[@x6King6x]

Are both actuator identical or different?

[@vitaliksvideos]

Both actuators are exactly the same, as far as I know. One is just closer to the firewall, the other is further away from it. I replaced the actuator that is further away

[@rebellionsquad7229]

Where can I get the disk and that arm at

[@vitaliksvideos]

I think your local pick-a-part junkyard is the best bet for this.

[@dawnofthedew7303]

The top pin that the long plastic arm was supposed to be attached to is absolutely gone. I don’t know what to do cause without it I can’t get anything to work any way. I can’t find anywhere to buy it either and don’t even know what the pin is called

[@vitaliksvideos]

I would recommend visiting your local junkyard and locating a similar year Dodge Dakota. Junkyards will allow you to take parts you need and purchase them for cheap. Often, internal parts like the pin you are referring to are untouched. It will be most difficult getting to it, I think, since it’s so tucked away under the dash. But it might be your best bet to find this specific piece as a replacement for your truck.

[@nathanbrooks3816]

I had your same issue and had to go to the junkyard to get a new one

[@kevinravenklarson1969]

cool I turn my ac and turn it to vent and its coming out on the floor and I don't get much out of the vent at all. maybe this is the fix thank you

[@vitaliksvideos]

If so, it’s a relatively cheap fix. Good luck!

[@johnruble3454]

Im confused on how to line uo the rod and where it goes

[@vitaliksvideos]

Do you still need help? Sorry getting back with you so late

[@philb4786]

Good video. However instead of just showing which actuator you are replacing with tiny little on screen shot. Please tell everyone which one you are replacing is blend door or mode actuator and if it's the one closest to the firewall or the steering wheel. It would make it a lot more Clear. Thanks

[@vitaliksvideos]

Thank you for your feedback. Mode actuator is the one getting replaced. I guess it’s the one closest to the steering wheel. It might be a bit confusing because people have different names for these parts and these actuators look exactly the same from what I can tell.

[@justforfun1797]

I want murchindice