Return of the Iron Lion, Holden Kingswood 304 V8 Engine Swap [EP6]

Support us on Patreon: / theskidfactory
Buy merch here: www.theskidfac...
Today on The Skid Factory, AL and Woody continue work on Ted Bullpitt with some help from Budget Thor. The Body mounts are replaced with some new items supplied by Resto Country along with fitting the wiring loom so that we can hit the key to test the starter motor and get some oil circulating throughout the engine!
Don't forget to subscribe and hit the bell for Weekly episodes.
Huge thanks to all of the Companies that have supplied parts for this build!
Check them out here!
gfb.com.au
www.harrop.com.au
www.precisioni...
www.hoppers.com.au
www.kingswoodc...
camtechcams.co...
musclegarage.co...
www.hughesperf...
www.pacemaker....
www.haltech.com
www.bciwheels.c...
www.golebyspar...
Like these new tunes? Download them here!
/ munro_music
open.spotify.c...
/ heights-single
For updates keep your eye on The Skid Factory (TSF) here:
Facebook Page: / theskidfactory
Instagram: / theskidfactory
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

[@theskidfactory]

Want to Support the show?? Visit our Merch Store! www.theskidfactory.com

[@tony_cracka9851]

Keen to get a garage banner flag if you ever get any made .

[@whipa]

"Budget thor" hahaha dont know why, but thats hilarious.

[@blackcountryme]

Exactly, I can't stop laughing.

[@joshbooth9772]

Best Nickname ever! Freakin' Hilarious!

[@mannycalavera121]

I laughed too hard at that

[@odogzero]

Al continues to be the most charming and unlikely show host. Much respect

[@mikewright9378]

Wanted to say thanks to you guys, been working on an old jag I bought that hadn't been driven in 20 years that after 18 months of work, on and off, I got to drive for the first time today. I wanted to say thanks because watching your videos helped me stay motivated when the road running seemed a little too long. Best part I went to register it today and the office was on Gold Coast road. Cheers from the states!

[@alanbutler2579]

Good to hear Mike. Rebuilding a car is a big undertaking and getting it on the road is a massive achievement.

[@malcolmyoung7866]

Hello Mike, I too have a Jaguar that I intend to restore and it’s fantastic you’ve got hours on the road and are using it. Well done. Not made much progress on my car as other projects and maintenance of them has got in the way. It will be happening though. I bought the car in 2000... have done less than 4000 miles in it since then. That wasn’t the intention. Will be YouTubing the work I do to the car.

[@mikewright9378]

@shane Yeah, it wasn't perfect but that is where they went and got the Iron Lion from right?

[@jbm3458]

Drive In movies and accidental kids, true nature of kingswood life

[@brianross4057]

Luv the safety clamp on the hinge.

[@888johnmac]

far classier than a piece of wood / old floor brush

[@JordyValentine]

you need them with these old girls, bonnet stays get in the way and fitting struts tends to warp the bonnet and doesn't look original

[@beardbuilds5140]

Best start to a Wednesday ever ! Who doesn’t love a bit of iron lion in the morning

[@JimPropert]

Seeing those dress rims, and hub caps brought back childhood memories of my father's cars.

[@1979Malibuick]

What's the cure for a shitty, cold, wet Tuesday? Fresh Skid Factory, that's what! Thank you budget Thor for taking one for the team!

[@curtislitchfield1378]

I just learned how a non unibody car is put together. This should be helpful when I get started on my C-10! Thanks mates!

[@squidgymop1]

Its great to see father and son working so well together well done Al and Woody

[@daveb5016]

Thanks Mal Leyland for the narration.

[@whiskeyinthejar24]

There is a Kingswood hubcap in my mum's backyard that has been the dog bowl for as long as I can remember. 25+ years. Still good.

[@omfgishBenneh]

"Wheres my beer?" What do you mean Woody? They're only lemon squashes ;)

[@biggypsy75]

love the wheels ,perfect!

[@oldninjarider]

love the OE Holden label on those busted bushings.

[@JordyValentine]

The label doesn't usually survive that long either

[@detroitredwing919]

I love those steelies with the beauty rings and stock center caps💪 great look 👍much love

[@67comet]

I love me some white walls (specially when it's a sleeper ;) ) .. "67 Mercury Comet 202 with White Walls, and a "65 Ford Falcon w/White Walls, both with dog bowl hubcaps .. Whoop!

[@fitzyholden1036]

Have only recently started using Kingswood Country for parts for my HR. Good mob, helpful and prices are reasonable.

[@paulcost6446]

Yep most of my replacement parts on my HZ tonner from them as well.

[@Encom0]

Excellent advice that flow and pressure aren't, and don't mean the same thing. Just because you have one you may not have the other at the required levels.

[@PiDsPagePrototypes]

All that rubber action,... Will be the first Kingswood that doesn't rattle since the warranty ended 😄

[@alexyo3927]

Guys I'm loving the show, your all honest blokes and I'd happily chill with a beer with you next time your in the Netherlands

[@markbithrey3635]

What no blooper out take? Love the kings wood brings back childhood memories of burning myself on the seat buckle and sticking to the vinyl seats great work guys

[@boomer_bob6493]

I do enjoy watching you work Al. Like most evil geniuses you're not comfortable in the public eye, but you suffer through all the same. Keep the great content coming Al and Woody.

[@danieltjr5649]

The Kingsy is looking beautiful can't wait to hear it fire up i think i better watch the next episode before going home ☺☺☺.

[@matt2452]

woah seeing those mounts with the holden name on them is just a real treat. long live the lion

[@enduroboi6780]

Haha you went all American on us with the 5 small bottles of oil 😉 top stuff boys I'm lovin this build, got a soft spot for kingswoods and 304s 👌👌👌

[@Knackersjewels]

Alan: Taps on hubcap Me: British Paints.... Sure can!!

[@grant7411]

Haha yep me too

[@alanbutler2579]

Haha, that is what I was doing in my head. 70's kid.

[@joealex65]

I wonder how mad does Al get everytime Woody says "Iron Lion" 🤣🤣

[@utesmate]

Well, Woody has got me calling mine an "Iron Lion"!! LOL

[@1080sucks]

Al must be green with envy over budget Thors man bun

[@Pablo668]

Budget Thor, ha ha ha love it. I shouldn't be, but I am somewhat amazed at the condition of those old body mounts.

[@ernestodeus6670]

Love the builds guys, not second guessing you here, but don't you usually put a rubber grommet in that newly drilled hole in the firewall, so the cabling doesn't rub?

[@CharleyGeorge]

I love staying till the very end for those extra juicy bits

[@ianmansfield8885]

I m a Ford man but love this series..al..I think it's your charm...hey budget Thor came back with all his limbs

[@BradGryphonn]

4:00 I used to use them as dog food bowls. I once had about 50 different hubcaps from different cars, ranging from ones from an FX, old Ford dome-type hub caps, some from the EH era, Dodge, Cadillac etc. I'd buy them from the wreckers for about 50 cents up to 2 dollars back in the early 90s. Kawana Wreckers up in Rockhampton had pallet bins full of them. I polished a lot of them and had them hanging around my bar under the house.

[@nismofreak33]

thanks again guys 😁

[@baileymackrillkemp3405]

You should’ve put a Buick v6 neoprene rear main, just gotta make them a little bit smaller and just shave it off on the bench grinder, for future notice you can use them in Holden 6s 308, 304, 253 ect

[@guusbouwmans5667]

Im not the first to comment, because I watch the full commercial before the video starts.

[@omfgishBenneh]

Not all heroes wear capes

[@droy333]

Life's too short to watch ads!

[@jeffJjhs]

No ad income,no shows to watch!

[@ebencullen7796]

@@droy333 je

[@rjl110919581]

Thank you share detail video

[@fastmonaro05]

Love those wheels and hubcap/rims.

[@emceeboogieboots1608]

Seeing that fuel tank reminded me of my first job as a petrol pumper. I HATED trying to fill those fkn wagons!

[@DanafoxyVixen]

Loving those rims and all the chrome on them

[@shanetorok3293]

Atlas portawalls bro, white walls that can be used with any rubber you choose and replaced if they get damaged

[@grantmurray7]

More brilliant content and chemistry between you two bloody legends. Woody your voiceovers sometimes have too much intonation bro. I want to hear your normal voice! Hope you don't think this is negative. Just trying to give helpful feedback because I'm sure you read these comments. Top work as always. You are getting so good at this. Deserve more followers.

[@Doc_in_the_carpet_truck]

Budget Thor fresh from Fraser Island love sunny coast queenslanders !!! better get me a lemon squash 🍺🍺

[@toddmccarter45]

I think the only whitewall options youre going to have in tires that big are to either get the stick on plastic things, or paint your own white on the tires with either paint or plastidip

[@TurboDog73TX]

Budget Thor.. Priceless!

[@victorbitter583]

It's coming along good. The music this week was an improvement on last week. I prefer a Currawong with a dose of hiccups to a chipmunk on helium. cheers.

[@alanbutler2579]

We are stll trying to get cold chisel and Jet on board for our music but they won't return our calls.

[@victorbitter583]

@@alanbutler2579 At least you're trying and I appreciate that immensely,

[@whatpassword1]

I swear that Woody did the questions on Mike Nolan's Long Weekend...

[@keithprinn6900]

new bushes suspension brakes and rims old girl is on a new life. with a new heart pumping her

[@nickgrech9634]

Awesome video boys!!

[@Seeeeyaaaa]

Hubcap doubles as bowl for when your 202 breaks down..haw haw haw! cop that one Holden 6 lovers..p.s sweet tunes for this episode did moog do that?

[@robywankenobi32]

Loving the series guys, can't wait to hear it roar into life :)

[@dandel351]

Budget Thor!! I nearly fell out of my chair !! You guys need to make a Budget Thor shirt..

[@nickcOfficial]

Best channel on KZbin 👏 can’t wait to see a torana come on lads get a torana in the shop

[@ashleyrichards4241]

Looking good boys. Gonna purge this gas tank with the challenger too

[@607CHA]

Keep up the good work boys.

[@Brock_Landers]

Y'all MIGHT want to order new door rubbers as well...lol

[@glenngillies2814]

Got the alert and here I am, SHOW ME THE VIDEO!

[@sarumaf]

Good video! Keep up the amazing work !

[@TimsAFK]

My old man still has a set of those hubcaps on his box trailer

[@johnnythatcher775]

I wanted to buy a Hq-hz ,but here in NZ they are to expensive so I brought a ‘88 Chevy Caprice instead .Looks like a wb but left hook and factory 305 v8

[@fambuild]

Good stuff!

[@mgunning7362]

its not Mr Sheen or Ajax, its Ipana. "The Kingswood! You cant take the Kingswood, I just Ipana-ed the grille!"

[@darrenv7929]

Woody. Have a look on eBay.. mate got a new set of 15’s of there cheap delivered. I’m a ford man but am lovin the build 👍🏻👍🏻

[@stephenbrown571]

Looks like this is going. To be a nice sleeper.

[@shortredman1]

Looking good fellas, cant wait for the fire up :)

[@anthonypoole6106]

Had the same rims and hub caps, dress rims on a HQ Ute I bulted back in the 80s

[@santinoharvey4555]

Love a bit of Fraiser

[@TerminusVox]

Budget Thor, lol! Legends.

[@TheScaryName]

That "budget-Thor" made me lol.

[@heatonhigh]

awesome video.. Thankyou :)

[@maso3l]

Drivers door rubber was messing with my OCD.

[@alexbrown1995]

Yep, a set of new door seals to go with the new body mounts. It'll be like a new car....

[@paulcost6446]

Just needs new plastic clips to clip to window frame.

[@greasyfingerprints]

Everyone knows you glad wrap the hub caps.

[@mount27]

Looks good

[@lockstockmonkey]

Budget Thor - man I laughed my ass off, so good.

[@eddjordan2399]

Awesome as all ways. Do an electric car next

[@paulcost6446]

So glad the owner went for old school black wide steelies with chrome dress rings and original holden hubcaps, which are hard to get nowadays, and hopefully white walls to boot, rather than big chrome none dish wheels with extreme low profile tires, hate that look on classics, actually dont like it on modern vehicles either

[@alanpeirce7292]

Budget Thor got me.

[@druslocallawncare109]

white walls yerrrrrrrrrrrrrrrrrrr

[@UltraFlynn]

"Budget Thor" - Made me laugh out loud. Funny.

[@someyoungguy6990]

Budget Thor...PMSL!!!!

[@MrOddman85]

11.10 so thats what Al looks like without a hat on 🤣🤣

[@kiwikingi1]

Vaseline in the oil pump is the trick

[@Chopperdog]

I own a Hq wagon that was a one owner car it was never driven in the rain or never parked outside at night the body shell is like brand new it's being built into a show car.

[@liamwindsor5854]

TheBadassPatrol crumbed sausages are my favourite

[@Chopperdog]

@@liamwindsor5854 What's that got to do with my comment ? lay off the METH pipe mate 🤣.

[@araml.3138]

First!! Nice to have a new episode on a late sunday evening! :-D

[@pirkkaruuska5766]

Tuesday night here..

[@MafiaboysWorld]

@@pirkkaruuska5766 Patreon vs non-Patreon. 👍

[@reeceholmes4442]

that vk's engine bay is looking rather tasty

[@yanuardhana6457]

When thor came in the simple package, and just simple made it budget thor 😂😂😂😂

[@riz3nfpv306]

Question for Al: Is it possible to run a turbo off the back of an AC compressor?

[@jimlux00]

Who did the loom for the elite 950? I'm doing a similar ego conversion on my HJ with a Holley 4 barrel throttle body

[@jmyd83]

it's almost Alive 👍

[@nipps223]

More budget thor abuse 😂🤣😂🤣👍🏻💜

[@clubsportr08]

@9:05 Drivers door rubber pinched out looks like a tongue poke 😜

[@chazhs]

Are you guys now sponsored by ToolPro? I’ve noticed your Milwaukee power tools have gone!

[@loudgsr]

Whats the go ditching the Milwaukee gear for Toolpro?

[@davidbrown6193]

Awesome 👍👍

[@frontball2754]

Ever going to do something with a Toyota 7m?

[@aussiebloke609]

As good as a black rim with dress ring and hubcap is, I almost wish the rims had been painted to match the body. Then you'd _really_ have a stock look.

[@iim0n]

Friendship with Milwaukee is over, now ToolPro is my bestfriend

[@alanbutler2579]

Never had a friendship with Milwaukee, they are a corporation, they don't do friends.

[@frankwatkins7942]

Prune that bloody tree scraping on the shed in every episode! Haha

[@alanbutler2579]

We do but everything grows fast here.