Review on NEW Optics Cut Keltec P17

[@Another1to10dude]

Hey guys if you want to try out the extensions here’s the link to the free print. Thanks! www.printables.com/model/451618-keltec-p17-magazine-extender-5

[@22onwheels12]

my 5 favorite things about this gun: its affordable, its cheap, its not costly, it wont break the bank, and it is not expensive

[@Another1to10dude]

Hahahahaha. All great reasons.

[@anonymousf8406]

I honestly was considering this for edc. Hits are what count, and man you sure get lots of chances to make hits with 17 on board.

[@zachsowersfilmandphoto6659]

+5

[@Vesper778]

Nope, this thing malfunctions like crazy, I have one and would never edc it.

[@Another1to10dude]

Hey man! I don't think I would ever personally carry a rimfire setup due to reliability concerns. That being said, a gun is better than no gun at all.

[@stratstrangler22]

Just keep it super clean and use quality ammo.

[@AMHlocal]

Also .22 has a lot more ass behind it than people think.

[@j0b1e]

This is my edc setup . 17 rounds in the gun and another 2 full mags in my pocket 49 rounds total i have plenty of ammo for multiple attackers if needed. headshots and heart shots are lethal with a 22lr or 9mm. Less chances of over over penetration in urban environments. If you had to use it in self defense and fired a round it sounds just as loud as a 9 mil or any other pistol. What counts is speed of the draw and shot placement. The p17 lets me practice more at the range because its affordable ammo for my budget. i focus on those two principles the most and i feel very confident in its lethality as an edc. If i was defending my life im aiming for the head and hitting the perp as many times as possible . nobody on earth can survive multiple head shots from my p17. THE BEST 22LR PISTOL AND A GREAT BEGINNER GUN WHILE STAYING ON A BUDGET.

[@111asmith]

High quality footage! Looks awesome! Very in depth review! The style is neat! Keep it up man!

[@Another1to10dude]

Thanks homie, I appreciate it!

[@auditrevor]

Sweet setup. Jelly of that suppressor on it. Seems like a pretty accurate little plinker from how far you can hit that metal target with it.

[@Another1to10dude]

Thanks for that! It’s a pretty fun little plinker for sure homie, I don’t hate it. Haha.

[@Mason_Hanson]

Where can I get a extended mag?

[@KarlHungus.]

Always liked keltecs. But I never seem to keep one for very long. Like this little dude though

[@Another1to10dude]

I feel that man. I’m just really digging this little guy for the moment. It’s been a fun little plinker for sure!

[@tekugun8918]

Randomly scrolling through psa when I spotted it. I won’t lie it looks like something you find in cyberpunk. Which makes me want to even more. Also because it would be a good convo starter

[@Another1to10dude]

I think I picked this one up at Shipton’s but it was almost the same thing. Once I saw that unique/weird little dude I just had to test it out! It was definitely a good choice in my opinion.

[@jamesowens2781]

Hello going to sub I love the P17. so much it made sense instead of wearing out my Ruger I bought 3X of these.

[@Another1to10dude]

I appreciate the support man! The P17 is great and at their price point they are fantastic pistols that are hard to beat.

[@AMHlocal]

Mine came with this sight.

[@Another1to10dude]

@@AMHlocal That’d be sweet if that’s how they came now!

[@Ben2Benw]

Thank you for the file link!

[@Another1to10dude]

Of course homie, cheers!

[@hunterfisher4717]

Great video. What suppressor are you using? How far back are you from the target? Thanks

[@killerthedog]

Where can I get the mag extension !!!!!!! Real good looking accessories Thanks E

[@Another1to10dude]

Thanks homie! You can get the free print here man- www.printables.com/model/451618-keltec-p17-magazine-extender-5

[@vtxdaryl]

I looked at the website and it doesn’t look like the extension is for sale. Is there another site that sell the extensions?

[@Another1to10dude]

@@vtxdaryl Hey there, these extensions were sent to me by the guy who designed them. The link below you is where you’re able to print them if you’re wanting to try them out. I hope that helps!

[@jamesbroughton7870]

I’ve never seen those mag extensions where do you get those?

[@brandonthomas6520]

Where you get the suppressor???

[@Another1to10dude]

Hey man I got this one from the silencerco website! You can check availability there and then you’d be able to select a local dealer than can get you one! It’s the silencerco sparrow.

[@TacShooter]

Good review. Subscribed.

[@Another1to10dude]

Thanks homie, I appreciate it!

[@kyleosbun]

I think im gonna put new holes in a baseplate i have and try that. I dont wanna have to pay for the crimson trace

[@Another1to10dude]

I don’t blame you one bit homie. I didn’t want to either but curiosity got the best of me. Haha

[@kyleosbun]

@@Another1to10dude its actually pretty cheap lol. But its the principle of the matter

[@ACommenterOnYouTube]

Ebay sells the plate to put on the oem slide to mount a red dot. I just got the Crimson trace red dot from Keltec, looks better IMO

[@jamesbroughton7870]

Oh never mind I just found your link for the mag extensions

[@Funnyclipz341]

what is that mag u got and can u plz send me the link to get one

[@mikekowalski971]

I got the same setup and it’s probably my favorite 22 pistol. What a great gun and mags are under $20. Where did you get the extended mag?

[@Another1to10dude]

I agree man, they are definitely awesome for the price! As far as the mag extensions, I was sent them by the guy who made them but he has the Stl print for free here. www.printables.com/model/451618-keltec-p17-magazine-extender-5

[@weezweez2904]

How do you even print

[@Another1to10dude]

@@weezweez2904All you’d need is a 3D printer or a homie with one haha.

[@vanbilly8387]

$200 for the upgraded slide -w- optics included, not bad, but turns a $200 plinker into a $400 plinker. Kinda want one... but kinda hesitant. Only seen a couple users talk about friction between the stock slide bar and internal parts. Does that still happen or is that just a rare problem?

[@Another1to10dude]

@@vanbilly8387 Yeah, it’s definitely unfortunate that it’s priced that way. I mean I can’t speak for everyone but mine has been rock solid. Since this video I have put at least 2k more through it with no issues minus routine cleaning. I’ve taken it apart twice to deep clean the build up and that seems to keep everything happy.

[@lewjac3]

Thanks for the video, may I ask what suppressor did you have on the gun?

[@Another1to10dude]

Thanks for watching homie! I had the Silencerco Sparrow on there.

[@nolagospeltracts8264]

so what's the total investment including suppressor and $200 tax stamp?

[@Another1to10dude]

Is this my wife’s alt account? It’s most definitely too much for a range toy for sure. The mag extensions were sent to me by the designer of them so that was an awesome free addition. The gun itself was purchased on sale for 180 and the slide with dot was 199. The can was 300(?) plus the 200 tax stamp. So with the gun in that current setup with the suppressor and slide I’m sitting close to 900.

[@nolagospeltracts8264]

@@Another1to10dude Lol! thanks for the reply. I have several guns my wife has no idea about.

[@Another1to10dude]

@@nolagospeltracts8264 No worries homie, I’m here to help! Thanks for the support, it means a lot!

[@charlietobin8728]

Does this come with the silencer already with it ,and if it does that's great

[@Another1to10dude]

Unfortunately the suppressor isn’t included but that would be awesome if that were the case!

[@Seramez25]

Where did you buy it? Can anyone get one or do you requiere a special license. ​@@Another1to10dude

[@matthewliebe3071]

This looks like you might be in southern Idaho. Also the metal Lark in the back ground? Just guess. I live in Twin

[@Another1to10dude]

You’re pretty close homie! I’m out in Montana brotha!

[@BigAP219]

What silencer do you use?

[@Another1to10dude]

I’m using the silencerco sparrow. It’s a pretty sweet can that’s nice and robust with a good sound signature.

[@scottmorgan1016]

Yes its nice, but its a cheap dot. With the rms foot print i would want a better dot. But the weight is the issue. Plus what i have seen the screws are different, almost like the dot was made for Keltec. TFB did a vkdeo on this. Its a step in the right direction but with slide design you might limited to certain dots

[@Another1to10dude]

I agree 100% with that. I wish there were better options for it so far, especially being limited and at that price point. Buuuut it’s a fun range toy and a cheap/quiet plinker. Thanks for the comment homie!

[@davehoyes7729]

You should say what bullets you are shooting.; Especially the speed.

[@Another1to10dude]

Good idea man. I thought I did in the video but I guess that part got left out. The main ammo was Armscor bulk pack, 40 gr standard velocity. (1125 fps) The second ammo I was using was Aguila subsonic 40gr (1,025 fps)

[@kemosabe762]

Very nice! Where did you get the mag extension?

[@Another1to10dude]

Thanks man! One of my buddies on Reddit donated them to the channel for me to try out. But they are available to print for free here!- www.printables.com/model/451618-kel-tec-p17-magazine-extender-5

[@ACommenterOnYouTube]

What ammo did you use ?? Also Sportsman Warehouse sells this P17 with this Red Dot slide attached to it for $400

[@Another1to10dude]

I used armscor bulk pack and Aquila subs for the video! Thats good that they are being sold as a unit now though! Thanks for the comment! Also, that’s an awesome Username!

[@ACommenterOnYouTube]

@@Another1to10dude surprised it shot well because the manual says to use HIGH Velocity ammo and the 2 you used are not high velocity. I tried cci ar tacticals (1200 fps) and it kept getting stove pipes every 2-3 shots. Switched to cci mini mags (1260 fps) and its been running flawless since. Just ordered this red dot and it should be here tomorrow or wednesday then test it on sunday. HOPEFULLY it works well and cycles the ammo. I have seen 2 videos where they had nothing but issues with it trying to cycle ammo, when they swapped back to the oem slide, it worked perfect, they put the red dot slide on and issues every 2-3 shots. Another video with the same red dot slide, they shot over 3000 round with no issue ...

[@Another1to10dude]

@ACommenterOnKZbin Oh man I didn’t realize that many people were having issues with it! I wonder what cans they were using and if that had anything to do with it? I know that if I don’t scrape my extractor and feed ramp every so often I’ll get some F2F. But once that’s out of the way I haven’t had any issues. I have quite a few thousand on the gun with no real issues, even using the extensions. Perhaps I got lucky or hopefully the ones in the videos you saw were the bad ones and we got the normal ones haha.

[@ACommenterOnYouTube]

@@Another1to10dude none of them had the silencer, just the red it slide. 2 had big issues with f2f while the other video ran thru a LOT with no issues at all. I guess it must be ammo related because keltec does say use high velocity ammo and all the video's i watched including yours, NONE used high velocity. ammo which is 1200+ fps. Now the cci ar tacticals are 1200 but i had issues with f2f constantly .... And that was the 1st day i got the gun and it acted up and i was pist off. Then i got the cci mini mags which are 1260 fps so thats only 60 fps more, not sure how much more kick that is but with that ammo it ran flawless. I have put about 20 mags worth of mini mags thru this P17 and its been rock solid. Just hoping when i get this red dot slide that these mini mags are stong enough to cycle it.

[@Another1to10dude]

@ACommenterOnKZbin Hmmm. That makes sense on the ammo for sure. I hope yours works as it should man! Ammo definitely plays a massive role, especially when using semi auto and rimfire. CCI ammo has also never disappointed me between that and Aguila I’ve never had any issues.

[@yootoober49]

Is the sight nv compatible? Thanks

[@Another1to10dude]

Hey man! I wouldn’t imagine so given it’s using an ambient light sensor to adjust brightness and you don’t have buttons to control it.

[@Captain_Bad_Bill]

Extended mag?

[@Another1to10dude]

Yep, this one is a +5 Extension to the mag, it’s a 3D printed piece.

[@ACommenterOnYouTube]

Wow

[@contractor556]

I had to put a piece of scotch tape on the C of the cutout so it didn’t ping lol

[@Closdmon]

What mag?

[@Another1to10dude]

Hey man they are oem mags with a 3D printed insert. I have the file pinned in the comments below man!

[@OOICU812]

Good video. Subbed.

[@Another1to10dude]

Thanks for the support homie!

[@jamesbroughton7870]

Oh I guess you have to print your own mag extensions I don’t have a 3-D printer

[@yomust0of]

cool! i like the integration of 3d printed stuff in the gun world

[@Another1to10dude]

I agree! It keeps costs down and allows for some pretty wild after mart designs!

[@l.s.451]

2A🇺🇲

[@michaelwhorley7731]

bro your at around 1k into a $200.00 gun

[@Another1to10dude]

Hahaha. I mean technically the suppressor tax stamp combo accounts for 3/4 of that price. I really only have ~$400 into the gun itself. The mag extensions were 3D printed and donated to the channel, the trigger was purchased on sale from m*carbo and the main gun was also on sale at Shipton’s. Plus it’s a justified purchase, new shooters and younger family members love to shoot it.

[@patrickholcomb9628]

DUDE, FOR REAL!!! @ 4:52 time stamp.....HOW MUCH CRAP DO YOU REALLY NEED???!!! on your belt or your Batman utility belt.... or do you just load the belt/ETC. with whatever you need for the Episode>>>>>!! BLAM SMACK POW OUCH CRUNCH FLAM BWOW SCHHHHTTT

[@stevekatz4372]

I don't mean to disrespect anything you do or say on this Video, concerning this Great 22LR P17 and I own two of them with 1000 of rounds used in both! I love these Guns and that's why I bought the second one, four months after My First One! Having said all this, I must say, I Just Don't Understand why someone would take such a great 22LR Tac Driver like this gun and make it into some sort of Frankenstein, Tactical Monster! I could go on and on saying why I feel this way But I won't do that. I think that I understand why you decided to customize this gun and I do respect whatever your reason was. JUST MY Opinion and have Fun with Your New Toy & Good Luck! NOTE: I Now Carry my P17 or my PMR30 as my EDC Guns!

[@christopherbrice5473]

r u sped?

[@akaTheDevil]

I wish we weren't stuck with trash Crimson Trace

[@Another1to10dude]

I feel that 100% homie, I wish the rmr wasn’t so heavy. If they could remedy the optic and the price I think people would be way more eager to spend the money on a P17. Thanks for watching!

[@ACommenterOnYouTube]

Its the lightest red dot out there at .6 oz

[@tyroneingram6005]

Where did you get your case

[@Another1to10dude]

Hey man I ended up snagging it off a sub on Reddit. I know Pelican sells them but they are out of my budget brand new haha. I know that probably doesn’t help too much but it’s all I got homie haha. Sorry!

[@KidFromQueens]

Dont see the point n a red dot on a 22lr! No real recoil! Love my FN 502 but unless i win an optic, im not wasting the money!

[@patrickholcomb9628]

$0.01 says, you never picked up 1 of your .22 shells

[@stevekatz4372]

I CANCELED This Post & and see my Previous Comment! Thank You All!

[@rgtn2441]

Why would anyone carry a 22 ? Good luck with that

[@blackdonte24]

@@rgtn2441Try standing in front of somebody firing one. Good luck with that😉

[@harrybaulz666]

This gun aint worth all that

[@Another1to10dude]

Haha. I think it’s a neat little gun for what it is but until they implement an optics cut version and reduce the price it won’t get the love it deserves.

[@martinrps13]

👎 slide and dot cost me more than the gun……no thanks

[@Another1to10dude]

No worries man, I get it’s not in everyone’s budget. I even address that in the video as well. Thanks for the comment though man, appreciate it!

[@martinrps13]

@@Another1to10dude it is well within my budget…..just can’t see a point on spending that much on those two crap brands. I went with the Sig p322 cause I wanted a 22 that was optics ready. I bought two of them for less than this single setup costs. Something is wrong with that. Also them limiting the footprint is a way of forcing you to get that crap CT dot that no one wants

[@Another1to10dude]

I get it man, it’s definitely not for everyone. I do mention in the video the redundancy of having to pay twice is less than desirable. I think going forward it would be great if they incorporated that with their new releases. Also, you have the Shield RMSc footprint and you’re not entirely committed to the dot. Like I said, it’s not for everyone man but some people do enjoy spending their money the way they like and for those people the review might be beneficial.

[@sktona]

@@martinrps13 You bought two $500 dollar guns for less than a $250 dollar gun and $200 slide? That's some special math.

[@martinrps13]

@@sktona Sig lists the MSRP at $399……so I am not sure how you get the $500 figure. I bought two of them while they were on clearance for $300 each. I am not sure who sales a newly released gun on clearance though. Sig had a mail in rebate for $50. Limit one per customer but they still honored two for me. Dealer had a discount where if you signed up for their credit card you saved an extra 15%. I also didn’t pay any tax, shipping, or fees for them.

[@up2me407]

that keltec is cool asf , sweet lil gun . ⛹🏾💯💯

[@Another1to10dude]

Thanks homie, I appreciate the support! I’ve been loving this gun man, especially with the new upgrades.

[@blackdonte24]

@@Another1to10dudeUpgrades are sick and makes the gun look sick! Can’t wait to pick mine up next week.