Rinnai I-Series Boiler Training presented by Northwest Pipe Fittings - June 2021
Пікірлер: 14
@bodega875 ай бұрын
this video is INVALUABLE to a new Rinnai owner. Thank you for uploading this.
@ISeekAdventure3 ай бұрын
The question was asked in class about the PVC exhaust temp limiter when using high temp baseboard heaters in a cold climate (Northern Minnesota). WIll this effectively heat the 1,900 ft2 home with the PVC vent limiter modulation? In the video it was said you'd look into that. Thanks - great video!
@katinasandoval52512 жыл бұрын
Great video Randy,
@jackclifton10697 ай бұрын
So, i am replacing an old non condensing boiler. It had one circulator going into the system. Because of the condensing boiler, with a circulator above the closed tee, it will still need a circulator going away from the boiler?
@andrewrogers4891 Жыл бұрын
why have a pump on the return side directly into the boiler if there are already pumps in each heating zone?
@northwestpipefittingsofmon9786 Жыл бұрын
What point video are you referring too so we can get you an answer?
@suspicionofdeceit7 ай бұрын
That’s the primary loop, it’s has to be separate from the zones.
@Tosuzawa Жыл бұрын
Mine indicates E393 error indicating DIP switch is OFF and outdoor temperature sensor disconnected. Is the performance of the unit affected without outdoor temperature sensor?
@northwestpipefittingsofmon9786 Жыл бұрын
I would recommend you call Rinnai Tech Support at 1-888-746-6247 with the model and serial number. They will be able diagnose that specific error code for you.
@rayramirez4040 Жыл бұрын
Just put dip switch to on if you are not using outdoor sensor. Also after this unplug and plug back in.
@Tosuzawa Жыл бұрын
@@rayramirez4040 will the efficiency be affected without outdoor sensor?
@rayramirez4040 Жыл бұрын
Yes they describe as running a Ferrari with an outdoor sensor. Without it would be for a scenario as you age some older folk like it really hot inside even though it's like 70 outside.