Disassembling Burnt Up Jeep reveals Great Things!!

Robby and crew continue tearing down the burned up Jeep. Hillbilly finds more pieces to use on his Bronco!
See the beginning: • I Drove 2000 Miles To ...
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton...
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #Jeep #Repair

[@nunabiz]

Warning, Don't reuse any wiring that was even touched by any heat at all! Or you're going to be chasing electrical problems and it will be a lot harder to replace, do it while you can.

[@joepaul1763]

This is 1000% facts

[@dailydrivenrust8557]

He’s probably gonna gut the wires and use a holly or fuel tech to run everything.

[@nunabiz]

@@dailydrivenrust8557 yeah these guys are professionals

[@williamd1891]

Hopefully we'll get to watch Hillbilly re-wire his Harley someday soon. (HINT-HINT....Robby)

[@nunabiz]

@Go away probably the same way I figured it out.

[@gerryhartung736]

We can't forget Dinners truck either. Robby is a great boss, that repays his crew for all their effort. Yea!, Robby. And Mrs. Layton for her unfailing support!

[@tobiastho9639]

And the Rokons...

[@javabeanz8549]

Even if she says he's WRONG ;0)

[@tobiastho9639]

@@javabeanz8549 Teasing can be so healthy for a relationship... ; )

[@idrive6576]

Take a look at Jeep Speed Shop’s Hemi V8 swap kit. We did a 5.7 truck hemi & 8 speed swap in our JK. Perfect swap that drives and looks factory. Super nice!

[@bryanmcdermott4204]

Thank you for featuring vice grips. Growing up every project featured those, a long flathead screwdriver, and a hammer.

[@tequilaman322]

My daughter and I loved meeting you at the Expo! We really appreciated you taking the time talking to us about Aiden’s truck. Thank you 😊 - Bryan

[@RobbyLayton]

No Problem at all!

[@tak-el-uc]

Hillbilly needs a "That's not going nowhere!" Tshirt to help fund the Bronco Dos build.

[@whammond511]

Is it just me or does HillBilly seem reluctant to accept help with his build?

[@javabeanz8549]

@@whammond511 he excepts free parts without a problem...

[@whammond511]

@@javabeanz8549 He seemed like he wanted to turn down those parts and offers of help to me. He said he had his own ideas when they told him about the supercharger. But maybe that just his way of expressing his gratitude. I don’t really know. But whatever he wants to do is what I think should happen.

[@bwz7275]

Better call that jeep Little SMOKIE!! ,good chance the smell will never be gone ,but glad you saved it for future trail use !

[@OldManTinkers]

Boy I remember when I was able to take things apart and remember where they went back...Lucky Dogs...LOL

[@W1se0ldg33zer]

One thing I learned working in a warehouse - if your lift tires are worn, there's other things it needs. Take it in to get serviced by a pro. Worth it.

[@motownXJdad9565]

that wiring and box you think is an alarm is an adapter harness for the factory MyGig radio to work in that Jeep, it allows the use of newer factory MyGig radios in older vehicles, it also bypasses things like allows dvds to play while driving, it also adds a backup camera

[@michaelmcclure8673]

Wow what a bunch of wires to mess with. I'd hate to be on the line installing those.

[@lomo297]

More crew time on screen, the real hard workers. Less SHOW, more KNOW ! Educational detail. Thank you.

[@thomstoddard1041]

Hey hillbilly. Thanks for the tip to drive over mt. Nebo. It was an awesome drive. We really enjoyed it.

[@kpdvw]

Up here in Salt Lake City in Highschool Auto Mechanics class we were instructed to refer to the entire system, engine, transmission, drive shaft, differential, axles as the "Drive line";... what you call the driveline in Ephraim and Glendale is actually the Drive shaft.....!

[@dougdean3134]

One bolt at a time and it will all come apart. Thanks for taking us along.

[@tylerrodgers5521]

Hillbilly needs a nice ride. Bronco build would be sweet.

[@johnkranz4004]

Good job Guys Can’t wait to see Hillbillies Bronco

[@yotatech04]

More than likely the seals in that supercharger are bad but you might be able to rebuild it before putting it on the bronco

[@joepg1608]

Watching Robby and crew waiting for this hurricane 🌀. Thanks for helping to break up the wait

[@whammond511]

Stay safe if you’re in the path!!

[@RUBICONTJ]

That LockPick allows you to enter information on the navigation while driving or if the stereo has a factory DVD player you can watch videos while driving, I have that lockpick and it works well

[@stephenpoe2037]

What a Crispy Critter the Jeep is ! Thanks for sharing .

[@montyfpv2259]

The excitement when a new video is uploaded. Love from Australia 🇦🇺

[@KENNEY1023]

You guys make a great team, that's how you're able to get so much done in a short amount of time.

[@W1se0ldg33zer]

You have to get every scrap of heated up parts replaced or you'll be smelling burnt stuff every time you hop in it.

[@dgmills5351]

Hey Dinner...I got my T-shirt and Love it! I wore it when I was going out with some friends to dinner! I also got my Golden Nugget photo book...the pictures are fantastic, and I got to help a tiny bit with the G.N. too. Demri You made a great book of memories

[@sammygordon9850]

The lock pick just opens the restraints on the factory radio allows you to do things you normally couldn't on the factory radio good to keep if your going back with the factory radio!

[@faerieSAALE]

PLEASE make some awesome merch with HILLBILLY featured on it! He is such a good man! I love him!

[@davidward7781]

Robbie's personality makes the channel

[@SchysCraftCo.]

Looking forward to seeing more videos soon. Fab on. Weld On. Keep Making. God bless.

[@isaiahburgess4533]

Hey Just met you guys today (Sunday) Forgot to get a picture with the three of you! Next time! Hope you got a little sleep Saturday night! Just want to say Thank you I do not think I did at the show. The skill and dedication you and you team exhibit is awesome! you guys were great to meet in person, hope you have the opportunity to make it to more shows! If I happen to make it to Utah I will make it a point to stop by! SO Thank you !

[@sandralutz-rodriguez2864]

unreal how little was damaged inside. So interesting to follow along a teardown. Can't wait to see what you have in storage for this JKU.

[@reddog543211]

Great job guys....ripping apart and dismantling is my favorite part....however reassembling is another story...lol....thanks for all the hard work to share with us....filming and editing is so professional .....Awsome job!!

[@boydwz66]

Nice to see you do something for your self

[@joshslackslack8115]

should try to get all three of them trail ready so then all of you can have a vehicle to drive around and hillbilly can have his bronco would be cool to see all 3 of y'all out having fun

[@edgeofeternity101]

there is a penetrating oil named Kroil, the stuff works very well. I used it yesterday on a frozen CNC toolholder. It came right off after applying the Kroil.

[@whammond511]

Yeah, Kroil (which stands for Kerosene&Oil) has been around for a long time. Great stuff!! But there’s some others out there that are that good as well!!

[@wilson4328]

Awfully dark under the Jeep. More light please. Love the videos!

[@CTC7599]

I'm sure it's been said, but if youre keeping any factory JK computer components you'll wanna keep that LockPick. It essentially allows you to make changes to the headunit programing, be able to run cameras, stuff like that.

[@olddirtypossum9808]

When you replace the dash, look up Caroboter and K1 head unit. The dash is already our, and it's an awesome upgrade.

[@christopherburbidge972]

It’s amazing how you guys get anything done with your other stuff! Energy Boys! Good Slogan, ehh!?

[@craigerss3926]

I'd love to see that supercharger on Hillbilly's Bronco...Fun!

[@munchywizard8380]

Not gonna lie. I thought it was going to be completely gone. When I saw Burnt Up I imagined the same shells I saw when I was working after the Santa Rosa fires. This thing is an easy fix comparatively :)

[@dmass409]

Lock pick unit allows cameras and stereo video picture to be use in drive.

[@dallanc5199]

That "added on" electrical box is for an aftermarket rear camera that works with the OEM radio. I have a similar one. Also those are Bushwacker fender flares, you could get a set of fronts to match the existing rears. I have those too, they're nice and light weight.

[@DaffyDuc69]

Bushwacker only sells full sets of them. You can't get single ones.

[@whammond511]

@@DaffyDuc69 Maybe off the secondary market?

[@rob4272]

i love my JK Robbie, this is exciting watching you guys do this build! Thanks

[@mikekuczynski1552]

Nice , I like it when a plan comes together.

[@setx2010teryx]

@robby layton The Locpick box is to add extra cameras to a factory style Chrysler Radio that does not offer a camera on select vehicles. (17 and older Jeep Jk) it also allows you to enable video in motion in cars that have DVD capabilities. I ran 4 cameras on my JKUR as crawl cams. super cool rig.

[@PoppopsGarage]

That "Lockpick" is an interface between a newer factory radio and an older car. I've run them in my 06 Magnums to run MyGig stereos. Cost a pretty penny.

[@tomlipscomb3350]

good job thats a hell of a lot of work

[@bobdixon3441]

Don't toss the Lockpick. It unlocks a bunch of features on the radio and NAV system.

[@j-Country-w]

Midwest jeeps in Indiana has everything used jeep that you'll need, the even had a LJ frame for me!

[@ry6346]

Lockpick is used to change the access to the headunit. Stuff like add a camera(s) and the ability to have the cameras on while the vehicle is in motion.

[@wiresmith2398]

Wish something similar was available for Mazda, it's infuriating some of the stupid computer junk setup in my poor new car.

[@timvanasen6711]

Suprised the minimal fire damage you should still replace all the electrical from the front clip & dashboard, great video you'll make this Jeep awesome thank's for sharing ❤😉👍

[@gayle4804]

Awesome video Robby, Hillbilly and Dinner!!!

[@reddog9025]

When pressure washing vertical surface, start at the bottom and work you're way up. That will help rinse off the debris and keep the operator dryer...

[@edbenson98]

That burned to the floorboards Jeep will be looking like new in no time!

[@johnelicker3967]

yes get her done thanks for sharing

[@randyjackson8138]

So wish you guys where closer, like say Canada as I would have bought a lot of stuff of the Jeep for my wife’s Jeep. Awesome video as always 🤟😎

[@mikehart2228]

Three builds sounds good!

[@lonhoschar1943]

You guys got a lot done!! That demo work can be a real pain. I'm getting excited to see what all you're going to do with the Jeep!!

[@christopherflannery1770]

I give it a year or less before Robby reaches a million subscribers. Great content keep it coming Robby and crew!

[@wd4477]

Man you guys are so fun to watch.

[@bobcatsmith246]

Yes, try and get them both ready.

[@Farm_fab]

eBay might be a good place to look for forklift tires. Also there might be a forklift junkyard in your area where you might be able to pick up some tires.

[@j.crenner191]

Time to build a bronco!

[@aphextwin5712]

I’ve been told by firefighters that once a fire extinguisher has been used on a car, it’s basically game over. That you’ll have never ending problems with any electric and electronic components because of the fire extinguisher’s corrosive effects. At least if a dry chemical fire extinguisher was used.

[@StormbornJKU]

You guys really took that thing apart! Geez!

[@gerryhartung736]

When Hillbilly comes to work sleepy you know he is installing the supercharger in his Bronco! Yea H.B.

[@forreststrong797]

If I were you I'd go with hydroboost brakes since you need a booster and master and I'm guessing you'll have some power steering upgrades for hydro assist or something. Some people don't like hydroboost though and I haven't seen many people install it on newer jeeps but I like it especially when your installing bigger axles/brakes you can set up your master cylinder to the caliper size. It's definitely important to size your master cylinder properly to the calipers a lot of people run into problems with that.

[@aarone3790]

I am so glad that you all are working on your jeep, yes it would be awesome to see what you di to the other one to, love you all and thank you for the spectacular Videos

[@garysherrill6063]

I;M REALY ENJOYING THE VIDEOS AND THE GREAT WORK THAT YOU AND YOUR CREW DO KEEP UP THE GREAT WORK;

[@jeremyrounds8609]

I like the Vodka on the sandblaster. Nice

[@henryhagen9259]

The A pillar switches are aftermarket! They are super sweet and I use them. They look oem plus. Just moved here to utah actually.

[@ronnydowdy7432]

You have a great team Robby and you know it I am sure. Like watching and listening to y'all work together. So much more fun. I hope you keep a jeep of your own. Enjoyed the show.

[@mikeschellenberg2021]

I love your content and you guys are naturals for KZbin. Have you considered getting with “I do cars”? He tears down engines every week and to my knowledge he has never done one that has been in a fire. Thanks for all you do.

[@henrycarlson7514]

Thanks!

[@BrandonSimmons-do6jq]

Can't wait to see it finished. (the jeep)

[@williamlind2843]

Both!!! You guys are inspiring me to get back to work on my 86' Grand Wagoneer. It was my 1st new family car and I still have it. Doesn't look the same though! Thanks to Rory I decided to keep the leaf spring suspension for now. I need an LS swap!! California smog shops hate testing my fuel injected modified AMC 360. Even though it passes the sniff test with flying colors!!

[@peterson0096]

You should build your cage so you can still use the two removable roof portions from the passenger and driver's compartment as removable roofs obviously

[@timkaldahl]

The bolts can't stick if they're liquid. I am amazed at the lack of damage. I can't say that I've ever responded to a "small" car fire. My favorites were when teenagers learned the importance of putting fuses in the circuits to their stereo amps and radios.

[@stephenhunter70]

The first car I had, actually had a 15A (Factory spec) fuse for the AM only car radio. Thanks GMH

[@TheOldaz1]

Off to a good start.

[@Patriot-pq1ku]

Drive shaft , drive line is the whole system tell Paul that too lol

[@unclegsworkshop9270]

Can't wait to see the finished project. It's a bit early to talk about paint, but a cool idea would be to paint the front blue kind of V shaped, add some silver stripes along the blue, then paint the rest black.

[@greasemonkey4god]

Hillbilly needs his own channel… I want to watch him out that turbski on the bronco2!!!!

[@mambothejeep]

lock pick opens up all of the features on the factory unit. It is about $850 upgrade that makes the factory unit worth keeping. You should keep that in there

[@johnbarbarich9489]

You should consider building a custom dash for the Jeep..gauges..everything...probably be easier and less headache doing it that way....then you will know exactly what everything is and where all the wiring goes......i would bet Painless makes a harness for it too

[@davidwoermansr]

The inline 4.0 used in the 1rst and 2nd gen Ford Exploders were great I've got 2 over 300k with no major issues just routine maintenance both are 5 speed or they probably wouldn't have reverse my 447k 1rst gen is getting the lid removed and a rollcage built this winter racing seats with 5 point harnesses and becoming the pasture cruiser/cattle chaser and trail pig I think the fenders are rusted enough to fit 35s with no lift but I'll probably lift it if I go bigger than the 33s on it now

[@troyrichardson2310]

WhooooHooò let's give ya a watch! Thanks folks!

[@iralosttwo5569]

We need a bronco vs Cherokee build and shoot out. Hillbilly’s bronco vs Robbie’s red Cherokee. Come on, let’s do it!!!!

[@danbierschbach7743]

I'm willing to bet that safety recall was for an airbag recall.

[@whammond511]

Right! Chrysler had a whole bunch of vehicles with those faulty Tata Air Bags. The recall is still active if they’ve not been replaced.

[@craigbowley6783]

Also what does a sick bird need?...tweetment😂

[@TimothyHigdonHiggs]

Great video today boss!

[@montegtaylor]

That looks like a lot of work. Keep it up.

[@maxdrelinger]

The Lockpick is not a security feature. It is a device for the radio to enable video in motion and a few other features.

[@davidsanders4703]

RobbyLayton to 1,000,000 The Red Headed Charger is mine son! I can't wait for hillbilly to install the supercharger on his bronco!

[@garymorris5974]

Yea where is the little joke teller. You know she is the star of the show.🤩

[@adam-n-stuff]

Robby, them forklift tires are FINE. lol

[@glengrade7794]

eBay is a great place to buy forklift tires. I have 2 older forklifts I bought all my tires on eBay. I went with solid rubber tubeless tires.

[@kennethcjackson3391]

Put that old dash assembly in the Bronco 😃

[@AFloridaSon]

All of my Florida neighbors, Robby Layton fans, good luck with this storm coming in later today. Stay safe.

[@abnpthfdr2934]

Thanks. You as well!!! My house is all paneled up and everything loose around the yard picked up and put away. We're never 100% ready, but we are as ready as we're gonna be! 🤙

[@61rampy65]

@@abnpthfdr2934 I hope you and your family and friends survive unscathed!

[@dannop2562]

All that mystery wiring in the dash that was added in-I recognized it. It’s a DIY remote start setup, and they are a BEAR to clean up when the “installer” goes about it like that…

[@boblister665]

In New England we get the torch out before the wrenches if it is more than 2 years old

[@whammond511]

In MI everything is rusted within 15 days!! We use torches after all our penetrants don’t work. But we just heat them up. Then they come loose and aren’t destroyed. And Antiseize is our friend when they go back together!!