T-Shirts: www.dahmracing.com/collection... Patreon for Build Videos: bit.ly/2koiw8G Instagram: bit.ly/RobDahmIG Subscribe to Rob Dahm: bit.ly/1OAN9yi AWD 4 Rotor Video Series: bit.ly/2QiFduE
Пікірлер: 492
@brians86642 жыл бұрын
Sounds like an air-to-water intercooler is coming. I would love to see the heat exchanger integrated into the hood somehow to keep that stock look. Now that would be sick.
@threadtapwhisperer51362 жыл бұрын
That would be trick! I wonder how hard a chrysler Shaker hood concept would be to make and if it would be a shaker hood scoop still if the rotary only vibrates?
@seanissomething2 жыл бұрын
Yeah if he can do a bigger badder "OEM++" style intercooler that'd be so sick! @Isaiah, make it happen!
@threadtapwhisperer51362 жыл бұрын
@@seanissomething ooooh fack yeah
@timothylolcats80202 жыл бұрын
air water for a build like this would seem weird to me though
@threadtapwhisperer51362 жыл бұрын
Always wanted to see a belt driven intake manifold on a rotary also. Like, Top FUEL injection hat, massive throttle blades, enormous 10:71 or 18:71 blower Freedom and apex seals for all! I wonder what a Nitro rotary engine sounds like with blower surge? Rob Dahm, please oblige me. Top FUEL 4 rotor INCOMING!! Would be epic
@LoudGuitar142 жыл бұрын
Would be awesome to see if Isaiah could build a custom top mount style intercooler that would be able to flow enough for this turbo. Bigger core and inlets using the original mounts and a made to fit seal to the factory scoop because... why not
@seanissomething2 жыл бұрын
This!
@Malibus_Most_Wanted2 жыл бұрын
Lol won’t work it’s the worst intercooler design period only way for intercooler to work better is better passage of air for cooling this is why sti/wrx guys running more than stock psi use a fmic they are better at cooling a charge n don’t get heat soaked
@streamcyper2 жыл бұрын
Finally a Rob video! Been too long...
@dmp.performance86352 жыл бұрын
x2
@zacharypierce46722 жыл бұрын
You are not lying!!
@ahmedalqubaisi21672 жыл бұрын
X4
@paksungho2 жыл бұрын
Rob got us all jonesing for a fix
@HochMusiker2 жыл бұрын
YES MORE DAHM CONTENT for real, the GOAT of non-journalistic automotive youtube content. Never to be beat having set such a high bar.
@0815881012 жыл бұрын
I hate that BS talking on all of these "journalist" channels. Despite, they bring the very same content for so many years... Unsubbed to all of them!
@RChero10102 жыл бұрын
MCM exists too
@Creeperkiller612 жыл бұрын
Lmao
@Daniel-jx3hl2 жыл бұрын
They make aftermarket top mount inter coolers for the FC. Re Amemiya made one, ARC made one, and a few others. May not find brand new but used for sure. You could also do an air to water cooler in the stock location for a super clean look but more fab work.
@Kseriessuck2 жыл бұрын
Arc is true jdm goodness but it’s a bit overpriced imo
@nicolasparisot71562 жыл бұрын
The part from @2:45 was just so good. Like sitting in the back seat with two genius tuners while just enjoying the sounds. Thanks for these vids Rob, we really need an hourlong version of that night drive :)
@parrisracing23702 жыл бұрын
Rob needs to buy a dyno. The street tuning is freaking me out.
@Murgledoo2 жыл бұрын
It’s part of the charm at this point 😂
@dukeofdream2 жыл бұрын
Actually tuning on the street is far better but of course nowhere near as convenient as doing it on a dyno...
@flabreque2 жыл бұрын
At least this one has headlights
@Brother2Jis_27s42 жыл бұрын
He'll cnc a dyno in an weeks time if he needs it...
@elchapo60792 жыл бұрын
He needs to buy a damn trailer
@Saintpablojuan2 жыл бұрын
Almost at a million subs rob, hella proud of you bro, you’ve come a long way hopefully you keep making your dreams come true
@frizzlefry19212 жыл бұрын
I would change out the inter cooler just for a test at least. It’s definitely kneecapping the engine for power. 15:40 yep for sure intercooler can’t handle the flow.
@YamahaRider2802 жыл бұрын
Agreed, I was surprised he decided to use it. it's cool for sure but definitely holding things up. Was it the 3 or 4 rotor that made crazy gains from improving the intercooler? I know this is way less power but Rob seems like the kinda guy who wants maximum efficiency for any set-up.
@Hybridesque2 жыл бұрын
@@YamahaRider280 4 Rotor. 1st intercooler had a U shaped path. He then changed it to a straight through design after using fluid dynamics analysis to realise the first design was causing a lot of pressure loss.
@gtray72 жыл бұрын
Did the booster vacuum fix also fix the weird MAP signal? If not, double check where your vacuum signal for the MAP is sourced. Back when I was a Microtec dealer and still using Haltec E6K’s on these cars I found that the vacuum ports closest to the throttle plates produced very erratic signals. I surmised it was turbulence near those ports.
@whoknows4722 жыл бұрын
I second this. Cleetus just had this exact issue on his White C7.
@darrylhaynes92082 жыл бұрын
@C l a r a__🍒 where do you put your vacuum port at?
@halofreak19902 жыл бұрын
@@darrylhaynes9208 lol
@Gabefc3s2 жыл бұрын
i love the FC content! its the most relatable thing to me that has to do with 7's since its actually an FC and not an FD. Please keep it going!
@darrylhaynes92082 жыл бұрын
@Rinda Foty what toy do you like a 12a or 13b turbo vibe?
@Brother2Jis_27s42 жыл бұрын
Maybe get rid of that stock intercooler and convert a new one to an interchiller, put an ac compressor from a prius or something like that and mount a condesor and get an expansion valve and make some custom lines. I think it'd be a sweet build series and I think it'd be the icing on the rx7 cake
@futurenickel7022 жыл бұрын
He could just modify the stock intercooler to be a water to air if it needs it that bad, running an extra a/c compressor is more load on the engine therefore power loss it just doesn’t make any sense.
@Brother2Jis_27s42 жыл бұрын
@@futurenickel702 research what an interchiller is... the weight of the water, pump, heat exchanger and the limited cooling time frame is way more of a loss than a 1 % power loss from an ac compressor... Also it maintains potentially as cool as freezing temps as long as it's operating with engine running
@alitis0002 жыл бұрын
I literally want to put an interchiller on my fc. Just mounted the water to air cooler and plumbing to run water, plus i still have my ac connected. First i need a better ecu and alternator
@gflex1872 жыл бұрын
I've just done this in my FC.. interchiller with electric AC compressor
@alitis0002 жыл бұрын
@@gflex187 where did you get all the hardware from? And the most important question of them all is, what are you intake temps like?
@MikeButash2 жыл бұрын
Might consider mangling the hood some to extend the width and height of the scoop if planning to keep the intercooler at the top, but the large flat hood will probably warp with all the welding. Maybe get the guys that built your fenders for the 4 rotor to build you one from 3d scans of the current hood and just extend the width/height of the scoop to mold in carbon fiber. Plus once they create the mold for the hood, I'm sure others with the same years would like one as well to resell more of them.
@Dropbear2372 жыл бұрын
I used to have to rely on those quick connect/release air fittings a lot and found if you trim the end of the hose cleanly, push in the fitting firmly and using a flat screwdriver or some side-cutters (while still holding the hose in firmly) pull the locking ring out then pull on the hose to lock it. I usually get an airtight connection 99% of the time, you may get a dodgy fitting or have to trim the hose again.
@darrylhaynes92082 жыл бұрын
@C l a r a__🍒 Clara likes roteries because they get around.
@michaelwatson67682 жыл бұрын
If you want to stay top mount I'm pretty sure there is a nice one for Subaru's that should work
@daytoneitner75942 жыл бұрын
I love the factory look of the intercooler. Would love to see a larger top mount that has the factory cover.
@sebsamblast2 жыл бұрын
I love watching you with subtitle and when you do a pull, it's says "music"
@Varinius2 жыл бұрын
The FC might just be the nicest sounding car yet on this channel
@ethancoy92372 жыл бұрын
It does sound very nice, I think I still like the sound of the four rotor better, just because it sounds like the 787b and thats just the coolest thing ever, though that three rotor is gnarly too, really all of them sound sick.
@dejdehddh2 жыл бұрын
I love your troubleshooting process bro it's so much like IT just with moving parts
@mihailpetrovici50442 жыл бұрын
I am pretty sure the anti surge a little to much anti boost, when he put the straight pipe ic the thing sounds like it has a blow off but it doesn't have, the anti surge hounsing is leaking to much boost I thing
@A_Aron12 жыл бұрын
Finally a KZbinr with sound editing skills!!! Car sounds amazing.
@AdamOpheim2 жыл бұрын
That's literally how a surge port works. Its the same way on every surge port turbo. I have no IC and twin 78mm surge port turbos with 3" piping "Y" to 4" piping and 102mm TB. It does the exact same thing. The TB is closed at idle. its going to bypass a TON of air through the port. Larger piping isn't going to change that, Its normal. It will bypass a ton of air at WOT as well. Don't get me wrong, there will be a massive pressure drop across that baby IC, but its not going to screw with your tune as its a constant. I'd look elsewhere. How much of a surge in the boost pressure is there? Could it just be the sensor signal noise? A lot of transducers will make a wavy signal and need "smoothed" in the software. -good luck!
@kevinsellsit55842 жыл бұрын
That is truly a beautiful car. Opinions ... AN fittings = when its done, it's done. (& Looks cool) Compression fittings = working perfectly for 100+ years Anything else = Fast, which is good because you will get to do it again and again and again.
@nickcoul6992 жыл бұрын
Thanks for taking us through your diagnosis process!
@danielkruger43052 жыл бұрын
Test your theory. Weld on a larger pipe to the intercooler. Find out if the core is a restriction. If the core isn't a restriction, I still think it would be interesting to convert the factory core to water to air.
@MrFolksyseekr8092 жыл бұрын
Glad to see you back Dahm. Hope you guys are treating yourselves.
@alltheboost53632 жыл бұрын
I'm about halfway through and what you're seeing is normal. the pulsating in your reading is a smoothing factor in your software. If you have a really good map sensor in a intake manifold and you turned all the smoothing off... you would see the same thing.
@Clutch_Gameplays2 жыл бұрын
Don’t get me wrong, a cammed LS loping is great, but a rotary loping naturally is music to the ears.
@tesau3152 жыл бұрын
"Rotaries are a waste of time, but it's my favorite thing to do" That hit deep.
@GamerSloth-ik8hl2 жыл бұрын
I can relate to the brake booster. Had my broken-in motor dyno'd, tuner was like "yep good to go, had her running about 10 minutes ago so it's all up to temp". Thankfully I didn't give it a bootful up the street because as soon as I put my foot on the pedal into a T intersection - rock solid brakes. Pulled up short, turned around and went back, and that little check valve had melted and was a lump of plastic. No vacuum to the booster at all.
@Gearbhall2 жыл бұрын
"Rotaries are a waste of time" -Rob Dahm, 2022
@darrylhaynes92082 жыл бұрын
@SO SEXY I'M SEXY do you like roterys or pistons?
@krammy20002 жыл бұрын
Keep pushing us videos! We all love them!!!
@alpetro95062 жыл бұрын
WaZz uP , can't wait till the crazy builds start again . It's kol seeing street rotary's running good with reliability
@tayshincampbell39952 жыл бұрын
Rob looking professional in that Valvoline coat And Isaiah in the background 2:13 Loving it
@Rallifab2 жыл бұрын
I am pretty sure I saw you guys driving this today on my way home from work. I gave you guys the thumbs up in the ralliart wagon
@anil42662 жыл бұрын
Thank you Rob, my fav utuber
@painedinks2 жыл бұрын
You gotta love inland empire, I was born and raised here and it never rains very often but when it does its always on the days you need it to be dry. lol
@Lawbase2 жыл бұрын
Such a clean car. Awesome content rob. Been a long way from self help videos
@dubiousf00d2 жыл бұрын
I needed this!!
@big_beed2 жыл бұрын
Man the sound of an super sequential brings me back and makes me smile
@SoobDoob182 жыл бұрын
I check KZbin everyday for a Dahm video even though I have notifications turned on just to make sure I’m not missing anything
@sydewayzmo39052 жыл бұрын
I miss everything about driving a rotary powered car but what I dont miss is the watery eyes from the dam exhaust!!! IYKYK
@yutub5612 жыл бұрын
SMC makes some really good push to connect fittings. We use them with helium (helium molecules can leak through smaller cracks than most gases can, we use the helium to test weld integrity) at my job and they perform well. Make sure you are using the right tubing too and double check your temperature ratings on all the above
@Rusty_Shackle-Ford2 жыл бұрын
Been (not so) patiently waiting for this
@GTAuron2 жыл бұрын
I actually cheered when I saw this video. More Dahm content!
@rx7dude20062 жыл бұрын
I knew as soon as that stock intercooler went on that was the issue.I was pushing my stock one with under 300 hp.
@patrickfort1234567892 жыл бұрын
Loving the FC videos!!
@christopheralexander75772 жыл бұрын
New rob dahm video = joy
@Jay-mj5lu2 жыл бұрын
Reyosuke Takahashi will be proud if you make it look like his FC in the Initial D fifth and final anime series.
@asahart24892 жыл бұрын
Lmao Isaiah in that back at 2:12
@j.m.59952 жыл бұрын
Loving the FC content!!! More please
@inaNis_2 жыл бұрын
There's a trick with rubber/silicone stuff where you dip it in isopropyl alcohol to coat the inside where you want the seal. Then when you place it back on and the alcohol dies, it gets really hard to pull off like OEM stuff. I've mainly seen it used on coolant stuff, but it might be worth a try on intercooler plumbing.
@Kyrazlan2 жыл бұрын
Finallllly a video. I was getting withdrawls yesterday and depression at seeing "11 days ago" for the most recent video.
@michaelh.12622 жыл бұрын
Chill tf out and stop putting pressure on unneeded people. Let rob do his own thing.
@AngryNui2 жыл бұрын
17:25 the turbo sounds like tie fighters from star wars :D
@mikeyacullo2 жыл бұрын
Hell yeah been waiting for a video to popup
@ericdraper57942 жыл бұрын
Love this project! Like I love all the others.
@BATworkshop2 жыл бұрын
it seems like a decent hub dyno would save you a lot of money by saving labor in the shop. I only suggest a hub dyno so you don't have to worry about wheel slip on rollers and tire wear or failure. Also they are really quiet so they can be helpful for diagnostic.
@Zesserie2 жыл бұрын
Thats one super cool RX-7, FC's are amazing!
@abrahammoua47482 жыл бұрын
IVE BEEN WAITING!
@ImHereForTheFreeStuff2 жыл бұрын
Honestly, I never thought I would like an FC. But there is something about white paint and bronze wheels that makes you appreciate this car so much more.
@janisjermaks2 жыл бұрын
Dahm and a solid car that's something new. 💪
@ttsupra872 жыл бұрын
That bov is mint!
@nnaheim.2 жыл бұрын
I love that FC
@poindexter90982 жыл бұрын
Rob, Fabdaddy, best way to fix the Vacuum line issue for wastegate is to use with - 3AN or - 4AN Stainless Steel Braided PTFE line, AKA Nitrous line. Easiest way is to find pre-made - 3AN pre-made nitrous lines at Summit/Jegs etc..
@poindexter90982 жыл бұрын
I was wondering how long it would take you to drop the stock intercooler. Glad you caught it before track day.
@pigeonsil240sx2 жыл бұрын
i would love to see the use of top mount do they sell a aftermarket one that can keep up with that turbo?if so heat soak will be a issue still as being in the engine bay so what about a simple intercooler mist system using the factory window sprayers with a mist head on them?even better would be a way to get them to spray at a certain temp or even boost pressure.possaby using AEM water injection but used as a intercooler sprayer this way you can use a tmic setup.just thoughts...
@racerx20842 жыл бұрын
Man that’s a great looking RX8 in the background!
@dukie16162 жыл бұрын
That was so awesome
@kennethmartin87142 жыл бұрын
You posted this as I am setting up the fuel system for my FB
@skylermurray59892 жыл бұрын
Can’t wait to finish this after the gym
@Omeshan2 жыл бұрын
The RX8 standing there looks mighty fine
@Bubbaj2262 жыл бұрын
Rob out here with them McQueen Vibes
@johnny_gtr2 жыл бұрын
Use the same principle that the Celica All-Trac/GT-Four did - put a Water to Air cooler in place of the stock intercooler, with a front mounted heat exchanger. It might add a few pounds of weight, but it'll bring your IAT right down and make them a little more consistent.
@mikeyacullo2 жыл бұрын
Sounds so dope
@levilueth77782 жыл бұрын
I have those Ecstas on my subaru. Love them.
@RTDragonCommando2 жыл бұрын
Believe it or not the restriction on the output of the Turbo reduces the load on it, instead of increases. That's why it was spinning faster with the intercooler connected or when you put your hand over the output. Because the air isn't moving out of the way it builds up pressure in the impeller blades, so it spins with the impeller without taking the energy away, reducing the load. That's also why it was blowing back out in a ring around the intake, only so much air can fit in the space, so the rest just get's flung back out. If you've ever plugged the end of a vacuum cleaner you've done the exact reverse, the load drops and the motor spins up because the pressure drops in the impeller. Block the intake or the outlet of an impeller and the load drops because it's not moving air, just spinning it.
@goodridence3152 жыл бұрын
I love this shit cause I’ve always wondered how people like Brent from PFI or Jeremy from Fasterproms started tuning and here I am now watching someone learn and progress tuning on a certain platform. Epic
@matsottile77182 жыл бұрын
i wonder if an aftermarket subaru intercooler would work if ya wanted to use the stock hood scoop
@housearea2 жыл бұрын
Keep it stock, keep it clean and original!
@MoonRammer2 жыл бұрын
This car sounds so early 200s. Each drive by reminds me of need for speed
@Karma282172 жыл бұрын
Early 200s? They had cars back then?
@housespider2 жыл бұрын
Damnnn a 10th anniversary FC too? Hell yeah!
@lucasmiguel9672 жыл бұрын
Banger 🙌
@unwanted_zombie2 жыл бұрын
In the background of every car video, there will always be somthing powered by a vq haha
@zaquedavis33912 жыл бұрын
This guy is so cool!
@YamahaRider2802 жыл бұрын
that turbo sounds insane
@JMB6762 жыл бұрын
Man that car is beautiful 🤩
@Just_Modify2 жыл бұрын
We need Rob to tune my buddies 63 vw bug with a 13b with turbo! Nothing sounds like a rotary, you had boost in your brake lines bro. Check for leaks in the brake system.
@dylansutton88982 жыл бұрын
Get it Rob!
@mihailpetrovici50442 жыл бұрын
The thing is surging at idle, what the hell, it will still surge since you have a throttle body And on the second ic setup it was sounding like it had a blow off but it didn't had one. The anti surge is so good it wasn't surging at all without a blow off valve off throttle. Amazing stuff
@oscarzt16522 жыл бұрын
rob is the absolute expert of butt dyno and road tunes. i need a UK version of rob
@MrDinospike2 жыл бұрын
Tiny intercooler restricts the GIANT TURBO. *surprised Pikachu face* Also. Robs clean build loses its hood... *Surprised Pikachu face.*
@timothyschumock22722 жыл бұрын
1 MILL HERE YOU GO
@HydraHut2 жыл бұрын
Damn that RX8 in the background looks good
@ajaxracing2 жыл бұрын
Sounds good
@turbomonte12 жыл бұрын
You can switch the tables in the FT to tune in VE like the other ecu’s you refer to.
@samhawley28852 жыл бұрын
This car sounds so good
@chrisvei62932 жыл бұрын
I ran a cheap plastic break booster flap and it broke. Thumbs up for using a an vacuum fitting.
@rs_rogue2 жыл бұрын
Guy who loves computers + car with triangle engine = chaos