i love working on small engines. dirt bikes 2 and 4 stroke. when i was a kid i started out on Briggs. now there is aftermarket for everything. back in the day there was a lot of swoppin and moddin. thanks for the vid
@mopedmessiah2 жыл бұрын
Holy cow the level of service you give to your customers is unreal, when I switch my 155 to a 171 ill definitely be buying the ProBld. Those exhaust studs and preinstalled pistons seem like a dream!
@RollingWrench2 жыл бұрын
You will love it!!!
@idrisColeman-rf9je3 ай бұрын
@@RollingWrench Hey would your 171cc big bore kit fit a 1P57QMJ without any boring done to the engine
@RollingWrench3 ай бұрын
@@idrisColeman-rf9je yes, but you will need to purchase our head with it.
@rockydotson312 жыл бұрын
DUDE your carb video was the SHIT!! I've watched it 3times now and feel so comfortable now working on my carb later today.. ill defiantly subscribe . THANKS
@RollingWrench2 жыл бұрын
Sweeet! I pumped I could help out. Thanks again for the support.
@jannep67722 жыл бұрын
What a great and well explained video. Thank you very much! I have a 61 mm Taida cylinder and forged (I assume 4032 type?) domed high compression piston in my GY6. It was also a drop in kit as cylinder liner is thin enough. I have a NCY big valve cylinder head with 27,8 mm intake valve and 23 mm exhaust valve. The cylinder head is at the moment at my cylinder head porting guy who cut better multi angle valve seats and will port it. As the short side of the intake port is always too sharp turning towards valve seat in these GY6 heads we first planned to raise the intake port and put some epoxy on the intake port floor to get a better shape smoother turning intake port towards the intake valve seat. Plan was to port more from the intake port roof. Then we measured the material thickess from intake port roof where it’s thinnest to intake valve spring ”pocket” or ”base”. Material thickness doesn’t allow us to make this modification so the porting will be done less ”radically”. There is still a lot of room for improvement. I can see that in this cylinder head you have there is a better exhaust port flange as there is not that extra cutted ring shape groove for that type of exhaust gasket. I use that same type exhaust gasket as there is in your kit. We could maybe buy one of your two valve GY6 head and see if it has more material to do the required mods. I have 30 mm PWK slide carb, NCY ported intake manifold, A9 cam and Turbo Kit exhaust with better modified and flowing noise killer.
@joshgnzlez1169 ай бұрын
I still not have my moped but soon, learning alot from you, Thank you Sir 💪🏼
@jasonwatkins2017 Жыл бұрын
Thanks! Been a big help
@Tony-20232 жыл бұрын
Wow man you possibly just saved me money, I was about to just go buy one thank god I found this video thanks,
@496842 жыл бұрын
Thanks for a simplified explanation for the average joe, looking forward to 50cc explanation. 😊💪👊
@garthkey Жыл бұрын
Did he ever make one?
@relax25652 жыл бұрын
I DID 3 FREAKING SPINNING BACKFLIPS JUST BECUZ ..GREAT VID LIKE ALWAYS..THANK U
@RollingWrench2 жыл бұрын
Lol thank you 🙏🏻
@mr_fish36032 жыл бұрын
When I upgrade and rebuild my gy6 im definitely getting the big bore and big valve kit just for the 8mm exhaust valve. I have had to replace and re tighten those studs and eventually had to tap it to 8mm just because it was a nightmare with how many times it broke
@RollingWrench Жыл бұрын
It’s a nice upgrade
@kb1Legendflaco2 жыл бұрын
Can you do a video on the 50cc for upgrades? Like big bore kits and carb. I’m new to your channel and i just got a maddog 50cc
@joeculpepper16779 ай бұрын
Dude that's freaking sweet. I got a Genuine Buddy scooter,with a 150 cc engine. It's a 2009 model. I would definitely love to install your drop in kit. Give her more 😂 nice video. You remind me of my shop teacher in high school . You explain everything like he did .I've always enjoyed learning these things thank you for explaining everything. I can't wait to start doing it this summer. Keep up the excellent work. You tell it like it is. Lets build a drag scooter lol😂
@andyproctor35882 жыл бұрын
Wow Matt one of the more informative videos I think I've seen from you that was top-notch man really enjoyed that✌️ from Florida
@RollingWrench2 жыл бұрын
Thanks again Andy for the continued support 🙏🏻💯
@tomthomas99102 жыл бұрын
Cool video" nice breakdown , forged in billet just like in high-end race engines and v8s you want it to hold together especially if you're running big boost numbers you got to have it I can remember back in the day having a yz100 and they sold a 175cc top end kit" braaap" had a 80cc wheel set, so" it literally look like an 80 " the big bore maico"s burrrt" & a XT600 Enduro, ect
@tomthomas99102 жыл бұрын
Had a 09 Aprilia sr50 water cooled fuel injected on board computer all digital not mechanical magnesium wheels disc brakes hydraulic disc brakes with pirelli tires stock brand new stuck a Leo Vince pipe on it and it really came to life was going to get a 70 kit like my buddies which is just the top end kit unlike the 86 kit with a crank , but sold it to a friend of mine but was maybe looking into getting a GY6 motor already done with all the rad internals" I know depending on the pipe and the carburetion and/or fuel injection how much horsepower does one of these motors put out say the 171 all the way up to the 205 CC " from what it is when it's restricted stock in comparison thank you most appreciated
@aloha_ohana2 жыл бұрын
Hey! Big fan of your KZbin channel. I've been scouring the internet and KZbin for a full wiring harness for a couple GY6 QMJ157 Kodi/Mossimo buggies we have here at our Boys Ranch, Agriculture Equipment and Small Engine Repair training center. I can't seem to find ANY (complete) wiring harnesses that either come with properly labeled wires, or with English instructions. All of the GY6 buggies we have were donated to the Boys Ranch, but apparently the previous owners' kid did a hack job on the control boxes, and didn't reconnect everything. The control boxes and everything inside them are missing!! I've been looking for several months and I haven't seen ANYONE on KZbin with a proper video on how to rewire a GY6 buggy, where they listed either a link where you could buy a complete harness, or a proper wiring diagram and/or pictures to see what wire color/connector shapes go to what. I've only seen one video that comes close which is several years old, but it's not a professionally done video like yours are, and it's just a young kid that never zooms the camera in close enough to see wire colors or connectors, never said where he got the harness, and no longer responds to comments where people have been asking over the last several years the same questions I have. Also, do you know of a place/link where you can get a GY6 QMJ157 case with Internal Reverse like most GY6 Kodi/Mossimo/Spyder buggies have? If you could record a video on that, I'd donate $100 through your website Tech Support link! On behalf of myself and many other viewers, THANK YOU IN ADVANCE!!!
@cripplingcracker9547 Жыл бұрын
Some info for anyone who has a real gy6 china ped... mine is a very rare 125cc Ariic, but model was released i think in 2018 there are older models, anyways mine is a short case 10" wheel (fuel injection) and yes a big bore 150cc kit works perfect so do it as no videos will show its possible but it is. Also i took the stock variator and filed the top of every ramp until thin and steep after smoothing the best i could i coated it with clear lacker faintly do not get it to drip spray, after dry i then added only 3 of the 12g rollers or 10g not sure, i play with it sometimes but oh its a beast. I also forgot to mention i added a rear performance clutch yes it looks like the stock but is only about £30 and is black with red springs and because it is 4 stroke i leave the black stock main clutch spring and im going to add a race cam with steeper ovals. Its a lovely beast of a machine and also stock exhaust and remove the air filter face cover it has a dedicated open filter srewed in under the air filter face plate dont remove that though if rains re attach the cover but first trim around the air access port on the filter face plate to enlargen it a lil. It rides almost like a 2 stroke or pit bike also a wheelie machine to say my bike is heavier than a vespa i think also engines are tanks i swear it never lets me down only other bits have so far unrelated to engine like kick stand, i reckomend replace most weak screws with British ect. Have a good day and i hope my info has inspired people to do it so much fun. Rid safe.
@Ranggaaguztianz-mf9mf7 ай бұрын
Can't wait the Video of explanation to Install NOS or TURBOCHARGER. Keep it up a Good work. Your Videos are Great👍
@lomtiptak9519 Жыл бұрын
What is the difference in longevity between the forged and cast pistons?
@chrispayne22692 жыл бұрын
I have a Linhai 260. Scooter are there any videos on how to do a cylinder replacement or a bore kit
@mattykool12952 жыл бұрын
Just thank you for sharing all your information so clearly in all your videos I’d love to come be your shop cleaner just to soak in your knowledge man your great thank you
@asabimotorcu86622 жыл бұрын
hello, can you make a video that explains the dimensions of the honda ruckus battery box garnet in detail?
@DRooPY_eYeZ_tellsNoLies2 жыл бұрын
Can you make a video explaining the little 125cc Chinese motorcycles engine/engines? The "YX140 Horizontal 4-stroke" and their big bore options? Maybe highlight the differences between those and the Honda Grom? That would be a MAJOR help. It's damn near impossible to get any accurate information on them. Thanks!
@WuKuVex Жыл бұрын
this please, the different kind of honda "monkey"-style egines, Then the verticsaal 200cc+ engines.
@cheemo1957 Жыл бұрын
hello,im not sure if i have a gy6..it looks just like what your showing..Yamaha Nouvo Elegance 135(AT135) 2011.now this is a thailand scooter 16"rims.as u can probably guess i would like 170ish big bore kit.thanks
@jimmyalgiere1291 Жыл бұрын
I'm a 70 year old retired long distant truck driver so the first 3 years started in 2013 I started a small Business selling security camera setups done pretty good with only using word of mouth. I decided to sell my house down in Dade city fl and moved up into the country in Obrien Fl. and its a lot different then city life so I just decided to buy and fix up scooters from 49c threw 250cc mine will be the Roketa 250cc b54 . Anyway I'm very impressed with your program and most likely start getting some big bore kits from your company . Your very intelligent mechanic on scooters. Such a very way you represent your self I don't see why any one that has a heart to be there own mechanic Your very understandable. Your a very good teacher and love your work. Just saying I watch your show's a lot and plan on joining your Fan land because you deserve it. will join 4/3/2023. Thanks
@RollingWrench Жыл бұрын
Hey Jimmy! I really appreciate your support. It’s people like you that keeps me making videos. 💯🙏🏻🖤
@johndefalque5061 Жыл бұрын
Thanks for the cast and forged explanation! I think I would go cast for fuel economy.
@tke7mu0u2 жыл бұрын
Some good info. Some flat out marketing
@theflannelguitarist20042 жыл бұрын
Alrighty. So what if I want a daily hard use one, but I still want decent performance? I'm assuming I just go for cast pistons at that point, but I'm not entirely sure. I want to do 171cc, and for my needs, I feel more drawn to the rolling wrench kit over the probuild. Are my concerns valid in that I should not do a forged piston? Also, in Alaska. Feel that might be important.
@MarcosFerreira-io7sk Жыл бұрын
Hi! Great video! The 171 big bore kit fits in the engine of a Honda ADV 150?
@chrisfulkerson4761 Жыл бұрын
Will this fit on the QIYE 125cc motors???
@Raaddller Жыл бұрын
Is the bolt pattern on a Honda 100cc four stroke scooter and the GY6, same? The bore x stroke on a Honda is a 47 x 63 mm.
@WuKuVex Жыл бұрын
Guys.. I recently aquired another 2stroke, awesome, exxtremely practical n simplified in looks, slim, has practicality as a farm helper even, if one so chooses,, im tallking about: YELLOW Piaggio Free 1998 (removed variator washer + 10 sizes bigger main-jret) that I had now in the winter already, its kickstart systen broke and was needing a new returning spring for for it but then I got ANOTHER one that was the same series, a RED Piaggio Free for a 100 bucks it only neede to be sucked out of gas wiich i did, removed the carb, cleasned it with brake clean n carb-clean after confirming a "beautiful" spark,. Now i wanna build some kind of light weight "big-bore" kit
@mccdub30517 күн бұрын
I want a drop in big bore kit for daily use for the 150cc
@benny5007 Жыл бұрын
QUESTION. GY6150CC ON KANDI SPIDER I CHANGED PISTON AND ROCKERS. THE ROCKERCAM, TIMING SPROCKET HAS A PIVOT TO THE LEFT SIDE AWAY FROM THE TIMING CHAIN. ( IS THEIR A SERTIAN POSITION ON THAT WHEN INSTATING?)
@debeeriz Жыл бұрын
can 125c cgy6 fit in a place where the 50cc gy6 engine was, without any welding or cutting
@arlenecaballero10012 жыл бұрын
Man i really loved motorcycle.. I wish you could race in thailandand do a documentary videos.. Lots of good mechanics there too..
@heathreviews2 жыл бұрын
Can u do a video on how to replace the exhaust manifold on the engine because my exhaust stud broke off in the engine on oneside and the other hole is stripped so I just wanna replace the cylinder head
@gregvangelder6363 Жыл бұрын
I have a qml case, having a hard time getting parts for it.
@omarfdhdr22512 жыл бұрын
I have a 150cc Sym Fiddle 3 and I want to convert it to fuel injection. What can you advise me to do ? Which efi to use ? And would it be easy ? And thanks a lot. I love your videos. Keep it up !
@damionanderson58872 жыл бұрын
You can try a high performance as well I was thinking of changing mine to a injector but the high performance carbonator is better
@omarfdhdr22512 жыл бұрын
@@damionanderson5887 what type of high performance carburetor would you recommend ?
@trav-raider76Alpha Жыл бұрын
Are there any quality(such as ur's) upgrade kits for GY6 48/50 cc?
@jimambonekeener80812 жыл бұрын
I was thinking he said he was talking about 50cc motor’s I’ve got a trike and I’ve upgraded it to a 80cc kit because I don’t know how big I can go. But I’m wanting to get the parts from him with piston already in so I only have to put g clips and rod threw it. But I don’t know how to get a hold of him to get the information and cost of what I am looking for.
@benny5007 Жыл бұрын
Automatically have oil pressure on cold start. Is that normal? I changed the oil and cleaned the screen and installed properly. ( Noticed that the exhaust out of the muffler is forceful and smells like very clean burn. Also it's cool exhaust air while idling.
@mowerreviewsrepairsandtric51275 ай бұрын
Hi Matt, im really considering getting a big bore 171cc kit for my Suzuki lt125 fourwheeler. I’m concerned about the piston slap in the forged piston. Can I use it daily and not worry? Or do I wait until the cast kit becomes available again? Thank you in advance!
@georgeford4606 Жыл бұрын
I have a gy6 type A with a short case. Engine# 1p57f. I’m looking for a drop in kit for the top end. Don’t really need more horsepower. Just want to make sure I order the right parts. It has the 54mm stud spacing. The rings are shot! Just trying to get it back up and going again for the kids. What top end kit would you recommend without boring the crankcase? Any help would be much appreciated.
@RickyBish4 күн бұрын
I have a bunch of stock heads and i recently put toghter a 80cc engine but this motor acts like it has too much compression so I'm being told I need a 80cc head so my question is if when u buy a big bore kit and they say u can use a stock head why is it acting like it has too much compression. Also I have several different heads that are built in different ways fir each . Some have a big/ deeper combustion chamber then other so can anyone point me in the right direction
@theyoshow62152 жыл бұрын
Hey I just bought an ATV with a 150 GY6 I need some information on pulling it out of the ATV and the removal of the engine from the transmission is there anything special I need to do upon removal and reinstall!! Been searching KZbin I figured this would be the best yet!😊
@mikepool2152 жыл бұрын
I don't know about anybody else but I'm sold. My next project for sure.
@RollingWrench2 жыл бұрын
You can’t go wrong :-)
@bhaihussain62715 ай бұрын
Any big bore kit for aprilia sr150 scooter 4 stroke 3 valve ??? & racing cam...???
@mikecuev820 Жыл бұрын
Hello sir, What could be causing some popping and bogging at 2/3 - 3/4 throttle on a 150cc GY6 scooter? Can you think of anything electrical that can be.causing this? I've already installed 3 new carburetors, 3 different csi boxes, different coil wires, and a couple other things and I can't seem to get rid of it. Would a bad stator or rectifier be the cause? Can you help me please? I am really just so frustrated right now. Thanks so much for any advice you could offer.
@keithgreatbanks2 жыл бұрын
Brilliant video would i need to change the injector and cdi for this to work ? I currently have a 2019 125cc 152qmi with EFI, Many thanks Keith 😊
@Danoman8122 ай бұрын
I have a 2023 Zhejiang Shanqi Tianying, Imported by Teyin/Wansen Motor Inc . Thing is, mine says it's a 168.9cc motor. Do these bore swaps work on my engine? The Motor number on mine says "PWMIC 169TYB" on it. So, i don't even know if it's considered a Gy6 or not... lol ANY help would be so much appreciated!!
@JesselPelamo-zd3vt Жыл бұрын
How much assbly engine modified from 20hp to 35hp?
@tim196868 Жыл бұрын
I have a Chinese adult scooter that I bought two years ago it's called a capri or Saber 200cc EFI. Can you tell me what size of rear clutch pulley I should order? And it's a long case.
@Kyrpis11 ай бұрын
Is there any way to order stuff to Finland? I only see germany and the uk being the only european countries available.
@thefatninja9422 жыл бұрын
How are the 232s on daily driving? I wouldn't mind some additional maintenance but still want reliability for longer trips
@RollingWrench2 жыл бұрын
I have had mine for 6 years. Just take care of it. It will last
@sketch19856 ай бұрын
I have a gilera runner vxr 200 it doesn't wheelie off throttle alone. Is it possible to make it wheelie. If so how.
@rubensgarnier79994 ай бұрын
Are 90cc motors still adapted for this video?
@dennisyoung4631 Жыл бұрын
The ProBld cylinder looks to have more fin area, also.
@lozelltaylor37467 ай бұрын
LF161QMK engine any info on what size cylinder head kit I need..broken valve banged up the piston head?? Force 200efi 168cc
@apegg52032 жыл бұрын
I would like to know if these parts are compatible with kymco super 8 2022.!
@christianfe8594 Жыл бұрын
Hello brother, thanks for the video, I have an x-pro 125cc, which cylinder do you recommend? Thank you.
@sharpnic2562 жыл бұрын
Hi, I have a Kymco VJR 110cc 4vlaves and I would like to upgrade the engine to 125 or 150cc. kindly advise on what I should do or need. thank you.
@dantickle55628 ай бұрын
What you got for a big bore kit for a 39qma df50sst? Would like to inquire.
@mikenundahl-oc9vr Жыл бұрын
I'm interested in a big bore kit with a programmer on my 2019 150 pcx. Any suggestions?
@jaykoerner2 жыл бұрын
What about the 110 Honda Navi engine?
@RollingWrench2 жыл бұрын
Hopefully soon all have some parts for the Navi. We get ours next week. Then I’ll be able to explore it :-)
@jaykoerner2 жыл бұрын
@@RollingWrench I have tried to look through the parts diagram for the Navi and Activa engines but I can't tell if it's just a big bore 50cc with a final drive gear change or a smaller 125 with bottom engine mounts, nor can a tell how much room is left for any possibility of a big bore kit... The engine is weird as far as gy6 stuff goes I'll say
@johnmichaelvincentgenato67902 жыл бұрын
hi sir recently 125 to 150cc just the block. and 19 to 24carb. but performnce still the same. what shoulf i add.
@rjpaniergo18678 ай бұрын
Hi new subbed here, just want a clarification you said on 7:38 with the dome (high comp) wil give you low end torque does that mean it will give you an aggressive acceleration? but poor top speed?
@keithkunik32292 жыл бұрын
Hey Matt quick question!! Im about to place my order! What crank would I use with my gy6 171cc without boring the cases?? Thanks
@anonkiba2 жыл бұрын
So if I'm gonna be driving short trips almost daily go with the cast piston? Wanna bump my 150 to 171.
@RollingWrench2 жыл бұрын
Ya, as a daily do cast.
@s0-s085 ай бұрын
are thees kits still available? i looked at your website but it says there sold out. are you guys planing on restocking anytime soon?
@correia.982 жыл бұрын
What can i do to gain more power on a 139qmb EFI ?? I own a Peugeot kisbee and wanted to give it a little more power and top speed , bigbore kits wont compensate the fuel management
@Kohnojake012 жыл бұрын
What size exhaust valves and or exhaust port does a 125cc have or a 172cc bigborekit? Im looking to make a custom exhaust for mine i have a 61mm bbk on it now but didnt realize to measure before, its already on my bike so now its out of reach to measure without taking engine of. Thanks
@Mathamayatbanahparyam1442 жыл бұрын
Srry, basically I'm looking for bigbore kits for non GY6 horizontal engines and inquiring about the vino upgrades btw, the vino is the only scooter, the other engines are for pit bikes/dirt bikes of the Chinese types.. plz let me know, thanks
@roywalls55952 жыл бұрын
Hi Matt I found a big bore kit for my Piaggio Mp3 250 IE it Malossi 275cc big bore cylinder kit! Cost $524.29 plus taxes!
@RollingWrench2 жыл бұрын
Do it!!
@mixvideoph69497 ай бұрын
Hi sir, i have gy6 1p57qmj my problem is block damage so i need new bore kit 61mm studbolt space is 57mm but i'm not find. Pls help me becsuse i need. I from philippines
@noeldiaz53162 жыл бұрын
I have a GY6 150cc and I put a new exhaust now is slow claming hill and low speed.what you recommend me to do i have the motor stock.Thank you from new Britain Connecticut
@TT.Hell. Жыл бұрын
I have noticed that some cylinders have the cooling fins at a different angle, why? And is one of them better?
@RollingWrench Жыл бұрын
Just air flow for cooling
@Byz_nasty_racing111 Жыл бұрын
What size jets should I use, it is a cheap 100cc big bore, so probably a 83cc or so, I have a performance air filter and exhaust, thanks
@RollingWrench Жыл бұрын
Get a wide band so you aren’t guessing
@valtteri71962 жыл бұрын
I have 72cc kit can you do some videos about that i only find these +100cc videos and wich is better long case or short case does the power chance at all in them
@juancho95432 жыл бұрын
If I install a big bore kit on my scooter Do I need to replace the crankshaft ? The scooter is a suzuki 125cc 152QMI engine with 26000 kms ( 16000 miles) im thinking upgrade it to 150cc
@enescakr42033 ай бұрын
İ have a 1p61qmk but i don't know anything about it, and for some reason i can't find any info about it as well
@Narblo Жыл бұрын
I want to keep my 125cc volume, is there options for the GY6 to add more power to it before adding a turbo?
@PKdrifter6702 жыл бұрын
I recently bought a 180cc big bore but the ring gap seems too tight on the cylinder wall? Whats the proper ring gap? Thanks
@JoshSparky199016 күн бұрын
So, do you sell 50cc bored out casing also? I saw a taida 105 bbk. 58.5 is the size, also the taida 44mm stroker with the 22T oil gear dont seen to bad, im not gonna race it, but being able to have that extra kick sounds nice.
@RollingWrench15 күн бұрын
The largest you can go on a GY6 50 is a 90cc 52mm
@JoshSparky199015 күн бұрын
@RollingWrench well, i saw the taida one BBK. Says you have to bore the casing to 58.5, it's with the tool that's on your page, does that work for boring out 50ccs or only 150cc and up? There's people making 105. I only work for a motorcycle place once a week to learn. Kind of interested on seeing how it's done haha.
@quirinonavarro18572 жыл бұрын
This kit is suitable for a Yamaha Fino 110cc? Or a Honda Dio 110cc? I mean, this engines has the same architecture of the GY6 engine you sale kits for?
@mickbrannan17672 жыл бұрын
Will this go straight in a Lexmoto titan 2020 model
@shaun9061 Жыл бұрын
Does cylinder wall thickness on these kits effect reliability? Will a smaller bore with a thicker jug last longer than the largest bore with thinner walls.
@RollingWrench Жыл бұрын
For the 171 no. They have been mega reliable. But I’m general, yes that fact is true www.rollingwrenchdenver.com/products/gy6-171cc-big-bore-kit?ToPasteboard
@alloftheabove45852 жыл бұрын
Good Day Sir, what set up of block set do you advice for a 125cc gy6 scooter for performance and daily driver.
@senlanguna2 жыл бұрын
52.4mm + cvk24,1L oil runs 56km
@timothyczajka9883 Жыл бұрын
Thanks for the video pal!! You can learn alot from a gear head!!!🙂✌️🕊️
@RollingWrench Жыл бұрын
Thanks for watching
@demonsubi3 ай бұрын
Your kits look awesome. Hesitant to buy though because of the part in the description that says you can’t guarantee it’ll work with a buggy engine. How am I supposed to know if it will or won’t? I can’t invest that much and hope it works
@RollingWrench3 ай бұрын
Ahh, purchase our 171cc gasket kit. Then you will have a template to know if it will work
@muhammadfadhil48212 жыл бұрын
Hi there, i just want to ask is the pgo trex 150cc 4t is the same as gy6.. thinking of ordering the big bore kit for my scooter
@marcosrodriguez964 Жыл бұрын
I have a 150cc atv all the wiring is messed up the motor works just want to get the wiring looking better my battery don't charge
@vashandelo Жыл бұрын
i have a stock 175cc gy6 engine efi .. can i go to 232cc .. thanks
@AaronShover4 ай бұрын
I put your 90cc kit on my dads ice bear mini max 49cc and put a nibbi carb was night and day way faster was able to over 50 mph easily and actually keep up with traffic which I feel is safer than a bunch of people trying pass
@RollingWrench4 ай бұрын
Oh ya! Big bore kits make a huge difference
@steveblottenberger10972 жыл бұрын
Thank you for your showcase very explanatory you are the best doing a really good job you to explaining and learned a lot from you and I will be calling you to buy buying some parts for my scooter 150cc I want to go with the drop-in Big Bore Kit and the can and the Borg piston can't wait and then I'm going to be buying a performance clutch from you thank you so much keep up the good work Steve from Annapolis Maryland
@HighKlassEazy2 жыл бұрын
So are the engines on the chinese pit bikes (QYIE) not GY6 engines?
@JonahNAloha11 ай бұрын
Can 150cc head and cylinder fit on a 50cc?
@AUDIABiQUATTRO Жыл бұрын
Could a gy6 with big bore kit get 250-300kg of weight up to 100kmh fast?
@hazcat6402 жыл бұрын
Now make a 225 kit for the TW200. 😍 Cast piston. Looking for about 20hp, good torque and long life. Please?
@ricojones14132 жыл бұрын
Whats the best big bore for 125cc benelli
@Moodalmanju47112 жыл бұрын
Bro,,, i want a apache rtr 180 pro bld cylinder kit... Is it available nw??? I want full kit.