The Burnt Combine

[@stevenherrold5955]

I WOULD JUST LIKE TO POINT OUT TO ANY WANNABE KZbinRS THAT THIS GUY IS MAN TO SET THE EXAMPLE FOR THE REST OF YOU IF YOU WANT SUCCESS TAKE HIS ADVICE I HAVE NEVER MET HIM PERSONALLY BUT I TRUST HIM LIKE I HAVE KNOWN HIM MY WHOLE LIFE HOW DOES HE DO THAT? IT'S CALLED INTEGRITY some youtubers are lazy slobs bad attitude and all but they still think they should get 800 million views or more to live the good life without having to go to work for a living i like an honest man and i would give him the shirt off my back if i thought he need it to all those who vote thumbs down get a life i would give him 10.000 likes if i could

[@ryans413]

steven herrold I've been watching some of his videos and I can say the guys top notch really respectful to everyone he comes across. He never complains about working make sure everyone's safe that's what missing from today's people they just go hard and attack it with no plan or any safety put in mind and get injured. If it takes you 5 hours too doo it then it takes you 5 hours I'd take safety over trying to rush the job.

[@Simon-390]

steven herrold , I totally agree , the dedication this guy shows is remarkable , best of the best equipment I have ever seen . I have only done a little bit of heavy recovery but I fully get and understand this guy , I stand back in awe of the man and take my hat off too 😉

[@11111972cjb]

I totally agree with you. I only found his channel by accident (or was it) and you are correct. I'm in another country but would trust this man with my life. Well done on your comment. I don't like the haters either but just remember that even the haters build his channel, probably something they have never thought of. If they just left home alone, that would do more than making horrible comments do. "INTEGRITY IS WHAT A PERSON DOES WHEN NOBODY IS LOOKING".

[@dennisgilbert125]

Liked What Ya Said.;; My 36 Year Old Son Run A 90 Ton Rotator In San Diego, CA For Years . But After One To Many Check Pucker He Went Back To On The Road .

[@davebrittain9216]

Who cares about thumbs down. They are just thumb down trolls anyway. They want to hear someone complain about their thumbs down.

[@PreachermanPiper]

I started watching another channel like yours. Five minutes into it the cursing started. I stopped it. I do appreciate your integrity.

[@MikeBrown-ii3pt]

I've said it before and I'll say it again...there's no substitute for skilled operators! As a truck drive and a farm kid I HATE to see what causes your equipment to be needed but it always will be and I love watching it working. You and your crew are always safety minded and professional.

[@kevinthomas895]

Drop it off at the dealership for an overheating concern.

[@jenniferwhitewolf3784]

Kevin Thomas Laughing out loud!!!!

[@thunderbear0]

XD

[@beckster181]

Dealers reply : Think you have a small wiring problem Sir it will take us a few days to find the cause!

[@markverloop7002]

and don't forget to check the oil level

[@redfish440]

Kevin Thomas dealership: That should buff out no problem

[@usaflagwaver]

I spent 35 years in the towing and recovery business, great job, makes me proud to see another professional at work.

[@malcolmnorman-philpott3734]

I was doing recoverys for 53 years but still like to see you doing what l always loved to be involved with

[@pleaseholdwhileiprocessyou1513]

Ron your videos are helping me get my mind off of things, unfortunately cancer is about to take another family member away from me. Keep up the positive attitude and God bless you and your family..

[@zenoelea8239]

Tandem lifting, four independent winches, estimated weight and CG really tests the best and you nailed it. Excellent demonstration of on how to guide and tutor your staff with safety top of the list. Best video so far. Thanks Ron

[@crsuperman1]

From one atheist to a religious man. I love the hell out of your videos. And I respect you. I can't wait to watch this new video about the burnt up farm implement your videos are so professional I want to drive a tow truck I'm working on it I'm working on my CDL permit

[@RonPratt]

I greatly appreciate that. I hope that everyone, regardless of religion, sex, creed....whatever, will come together on this channel and make it a respectful of EVERYONE community. Thanks for your part. Best of wishes on your CDL.

[@jenniferwhitewolf3784]

Truckbugs5 gamer boy Cantu Ron shows the example of living well, treating all well. Very refreshing in these days!

[@mats852]

Yep, at the end, we're all humans. No wonder you guys are getting insurance jobs, that was a very professional lift. Subscribed!

[@ayitsyaboi]

I'm agnostic, but I agree, stand up dude. I can't stand the militant atheists that lump everyone into the same basket.

[@gorillaau]

Some people love creating a class divide or tribal warfare where there is none. Personally, I judge someone by what they do, and not what they are. We all mess up from time to time, just admit it, make amends if possible and move on. Just a pity that society seems to be going the other way.... deny that it happened, refuse responsibility and ignore it for as long as you can.

[@christopherproulx2683]

Ron I have to say I love your videos what I love even more is that you ALWAYS put the safety of your crew before everything else. Keep up the good work.

[@traviswalton3728]

Just want to say it was very nice meeting u today at the Rhodes truck stop .... love ur videos and stay safe...

[@civilizeddelinquent563]

Talon didn’t bring his grinder but he did bring 2 apples 😂😂😂

[@mikehooper2188]

My kind of man, keep the food close!!

[@GerryFDonnelly]

This channel is one of the most interesting and different I have come across. The knowledge of the mobile crane unit operator is amazing - and really is enjoyable to watch an expert get the job of removal/lift/push/rescue (or whatever)... getting the job done. Each video posted is so interesting to watch.

[@randallbanks1589]

I love how quickly Talon(?) backed up as soon as you said he could use his remote..

[@ThatOldStoner]

Huge respect to Ron and Ethan. I appreciate hearing a son call his Dad Sir.

[@pickelsvonbrine]

My uncle is a farmer. Many years ago he had an arson incident at one of the barns he rents on a customer's property. Someone had lit the hey on fire in the bar. It ended up burning several tandems (these are hey trailers), a soy bean drill (for planting soy beans), his brand new tractor (if memory serves me right it was an 8430), and about 1500 bales of hey... Another farmer just in the town over had an incident where hey spontaneously combusted (happens when put away wet or becomes wet) and he lost 2 of his 4 combines just before harvest season... See you do this reminded me of the careful work a towing company had to do for my uncle and his friend. Hard work, careful planning and experience goes a long way. Good job there Ron. Always respect the work you do. Keep it up!

[@ImpulseMoss]

Ron. Just wanna let you know. You are making me think of coming down there and visiting you lol. I am in New York, and 17. Your videos entertain me and keep up the great work!

[@josephboley]

I love watching your videos.your very very respectful and considerate of others.my grandfather was too.he taught me to do the same.and his name was RON too.if everyone was that way the world would be a much better place.thanks for the great videos and may God bless you.

[@Emmy_Reacher]

I'm beginning to think of Marty (trucker extraordinaire) as a part of your crew, lol. He seems so "been there, done that--- a thousand times"--- more than just about anyone I've ever seen (except maybe your dad). I love it. It denotes a lifetime of good, hard, solid---and SMART---work. Watching your videos keeps my hopes for this country alive. Thanks for posting them.

[@CPAICEO]

Glad to see Ethan with the Mavic Pro; that'll add another dimension to your videography. And good luck, Ron, with the part 107.

[@KarmaStoriesPodcast]

Hey Ron, thanks for the inspiration with your videos. This and encouragement from family, and I'm making a career change from Retail Management and on Monday start training to be a rollback driver. I'm looking at a few years of experience and then putting my Management skills to use and starting my own shop. It's a crazy change, but I'm hugely looking forward to it! Wish me luck!

[@philipmichel215]

An Oscar winning production! Looking forward to drone shots in the future.

[@abuubaydullah1]

Many people don't understand how hard it can be lifting large vehicle that is burnt out and how you have to be on top of safety not just for yourself but for everyone around the job and the driver of the low loader kept going in,i understand he had to put his blocks in he was so relaxed in doing so! , thank you for sharing Ron Pratt as always stay safe.

[@walterramey8302]

I am a new subscriber just wanted to thank you for the great videos and for being a believer and not afraid to show that you are, may God bless you and your family, Thanks again.

[@RonPratt]

Thank you very much. I hope you enjoy the channel and our community. Thanks for watching and God bless.

[@edwardpage8959]

Ron, Another great 'Team' effort with much attention to details and safety. Yes, I too was concerned for Marty, but he no doubt is no stranger to this line of work with regards to what, where, and when he should be to do what needed to be done. Cannot wait to view Ethan's drone footage. Well done!

[@michaelhyde-parker6344]

Love your work Ron & team. Your professionalism & attitude toward the job & people always stand out. Stay safe & God bless all

[@chrispancoast9767]

Ron, you done it again. Made it look stupid easy when in fact it is extremely complicated and if you showed the math on screen it would likely blot out the whole video! Great recovery. Keep doing what you do and have a safe and blessed life.

[@joelmccoin9727]

Never a dull moment at Midwest Truck. You and your crew are real Professionals, A wise man told me once.."The cream always rises to the top" you guys are a perfect example of that. May God Bless....stay safe

[@RonPratt]

Thank you so much for those kind words. We work hard for our customers and enjoy the challenges. Thank you for watching and God bless

[@modkartracer3358]

That appears to be a DJI Spark. The wife got me one for Christmas, and I’ll tell you, it is the easiest drone I have ever flown. very smooth and records in 4K.And btw, another great video Ron.

[@84953]

Ron, a suggestion for you. Get 2 or 3 Motorola UHF radios along with the hands free accessories. Headset and boom mic, or throat mic. You can get these off of ebay used. Send them to a licensed place to set them to several of the GMRS frequencies. Use these for communication between you and another operator, or any other people involved in the job you are doing. This will greatly improve communications between you without having to yell to try and be heard/understood over both distance, and the background noise of the trucks. I can't imagine how this wouldn't add to the safety factor involved in these jobs. The reasons why I recommend the parameters I gave you are: Motorola is the workhorse of commercial radios, Getting used ones on ebay can save you big bucks and the chances are good that you'll get good radios, licensing for GMRS frequencies is much cheaper than going with registered business frequencies as well as virtually no boundaries on usage as you might have from private business frequency license. Of course one of the other advantages is that you can the two or three people in different locations to better view what's going on. You need UHF as the GMRS frequencies are in the range, vs FRMS which is in the VHF range. Also, the UHF frequencies will give you more range and less likely to have interference from buildings and the like.

[@n4gix]

Unfortunately, the FCC does not grant business use of GMRS frequencies any longer. It is also limited to one's family, which extends two generations before and after, including in-laws. Essentially everyone except the outlaws! :) Employees are not covered however... FRS (Family Radio Service) is also UHF (shares interstitial frequencies with GMRS. It is "Licensed by Rule" meaning one does not need a license. As of last year, FRS is allowed for business use. Given the short distances they'd be working with, 500 milliwatts is more than enough, up to 2 watts are now allowed, but the "fixed, non-removable antenna" rule still applies. There are several companies that sell tiny, shirt pocket sized transceivers for around $15 each that keeps costs down and are essentially disposable units. I have eight of them I keep in case I need to loan some out to volunteers of an emergency group I run here in Northwest Indiana. They are pretty much "idiot proof"... :) See: "WLN KD-C1 Rechargeable Mini Walkie Talkie, UHF 400-470Mhz Prefessional Two Way Radio with Desktop Charger, Belt Clip and Earpiece" on Amazon for $15.99 The VHF radios you allude to are the MURS (Multi-Use Radio Service) allocation. There are five "Licensed by Rule" frequencies available for family or business use.

[@catlockhart6965]

Been watching a couple videos of a tow company from the west coast and in no way do they compare to what you do with or without the row tator ( lol). They say a rotator costs to much but it takes them 10 times longer to get anything done so they can charge more.. Best invest you've ever done.

[@craigpinto3577]

Those Combine things are not cheep, loved the drone. God bless and be safe

[@RonPratt]

Thanks. Hope we get to use the drone more often. Thanks for watching and God Bless.

[@letsgohogwild2394]

The 107 license is same as getting your pilot license and you need to retake it every two years. As America blesses God, God will bless the world.

[@patsellars5658]

Fantastic job Ron, and you certainly do work alongside some great people, well done to you all! stay safe and God bless, Pat. UK,

[@RonPratt]

Thank you for watching and God bless

[@ctitown4488]

Need more Midwest towing videos Ron. Having withdrawals. Love you guys. God bless you all.

[@helenegirard6959]

I'm using wife's computer,name is Alain.Nothing worse than having that weight resting on pointy steel on a wooden deck,a nightmare.Great stuff guys!

[@Redneckmfg]

Cant wait to see the drone footage !!! That is always an amazing perspective on any video... Thanks for doing what you do and how you do it .. Love watching you and your boys Work !!!

[@RonPratt]

Thank you very much. I hope I get to use the drone footage. There are several questions about the legality of it that I am trying to find answers for. Thanks for watching and God bless.

[@nethalus]

I bet that made an insurance loss adjuster have a few sleepless nights. A job well done to you and your team Ron

[@producerk8247]

Thank you for all the great footage and different angles. Just one more view to see... the drone footage. As always, stay safe out there.

[@kevinwilson33513]

Hey Ron I’m a truck driver myself and I have seen many rollovers on the interstates and I have always wonder actually what goes on to get one back on it wheels. Thanks to your videos I can see this process first handed. Thank you and keep up the good work.

[@RonPratt]

Glad you are enjoying the videos. Stay safe and keep the rubber side down. Thanks for watching and God bless.

[@davidwayne9982]

I love that we can see the drone a bit too... so PROFESSIONALLY DONE--- LOVE IT..

[@rogerdavies6226]

sure like the way he keeps equipment organized. Mark of a professional, a good one.

[@davidjfiedler]

It amazes me how much you use your rotator. Before finding your channel I was really only familiar with the local towing company’s truck, and they seem to leave it in the garage for the most part.

[@Mrtubbs56]

Excellent teamwork gentlemen! Ya know Ron, I have watched this channel grow vary rapidly. That says a lot. Can't wait to see the drone footage of this one!

[@RonPratt]

Thank you for watching and God bless

[@dighsx]

You guys make it look easy. That is a scary about of weight. It would be cool if they made it so you could run both trucks from one remote. Stay safe, Jay

[@christophersouthey7047]

Hi ron I think your videos are brilliant good information nice and polite to everyone you meet its a pleasure to watch so much so I have gone out and bought a peterbuilt 359 to scratch building into a wrecker keep up the good work I watch all your videos say hi to talon for me from your friend across the pond in the uk

[@earthsbeautiful9327]

Awesome trucks-check- Awesome crew-check-Awesome teamwork and footage-Yes Thank you Ron :)

[@cardiackidjones2848]

Ron you have THE BEST professional recovery channel and I really enjoy your commentary from Columbus, Ohio...........sorry to see that combine in such bad shape. What a helpless feeling it must have been for that farmer to see so much money go up in flames :-(.

[@RonPratt]

I would agree on how badly that farmer felt watching it burn. Thanks for watching and God bless.

[@LOADING_95]

Ron i love Ur content i"m even trying to watch all recoveries, but this video has that constant BUZZ of the drone

[@dinohaskicgamer]

21:00 “Mike did you bring your grinder” Mike -“no” “I brought an apple though, two apples.” 😂😂

[@teamstromski]

Our hats are off to you and your team. Excellent lift!

[@davidclarke4040]

Hi Ron great lifting job you done well with that guys

[@carltona6429]

Another great video brother Ron. It's nice to see the teamwork that each of you have. I hope that nobody was injured in the fire. As always a devoted fan, God Bless you and yours always sir.

[@diannaf4821]

Another awesome team work job. Can't wait to see Ethans drone video. God Bless.

[@CrossAnchors]

A very interesting video this time Ron, but as always, with your expert care and attention to detail

[@RonPratt]

Thank you and God bless.

[@sandy1653]

Hopefully the smell was gone by the time you had to deal with it. We had a couple trackhoes burn behind our office and it smelled awful for a couple of weeks until the insurance approved a salvage company to get them out. Anyway, stay safe out there Ron and crew; good work as always.

[@MattyM110]

Love watching your vids my families company just got our first heavy, a Dangelo Custom Built 30ton our cities first heavy wrecker have a 16ton B&B but with a lil independant underlift that doesnt have no reach useless unless you sling everything,trying to learn the ropes a lil by watching you keep up the good work stay safe

[@RonPratt]

Best of luck to you. I don't know everything, but I appreciate that you feel you can learn something from me. Personally, I continue to learn daily. Be safe. God bless.

[@kennykemp2790]

Every professional should still be learning no matter how long you have been at it. I'm 20 years in the water well industry and still asking questions. Enjoy your videos, Kenny.

[@Dappdude]

What an awesome lift! I had no idea the older truck could also do lifts like these. Also, those propellers at eyeball height at 8:30 made me a bit uncomfortable. ;)

[@RonPratt]

Yes, the Western Star with the Vulcan V70 can lift as well. It just can't lift as much or as high as the Rotator and it can't swivel the boom. Thanks for watching and God bless.

[@larrylay4010]

I have done my share of rigging. One of them was 130,000 and I had to lay it down coming out of the hole. Point being I know a good job when I see it. I hate it but I am going to have to give you an a plus on this one. Also an a plus on safety. Great job ron. 😀

[@sterlingodeaghaidh5086]

Man, I love how you guys use a stair step method to raise that thing in the air in the beginning, it's probably a lot easier to cordinate than to try and raise both sides up at the same time.

[@RonPratt]

Part of the reason was that the machine was frozen to the ground. I wanted to break each side free independently. Thanks for watching and God bless.

[@New_Identity]

Enjoyed the video. I do wish you would have included some footage of the process in strapping down the combine to the trailer.

[@thunderbear0]

Lol that combine look likes ww2 destroyed tank xD

[@aspiringboba02yt59]

-CSS - THUNDER- I agree

[@gorillaau]

-CSS - THUNDER- The WW2 tank would be a lot lighter :-D

[@Thestuffnope]

gorillaau that would depend on the tank. Their wight ranges from less then twenty tons, to more then 60 tons.

[@TheFirstGamingYT]

That’s what I thought

[@mikebiron7339]

Well done boys! Can't wait to see that drone footage too! Be safe.

[@ManxAndy]

As ever Ron, meticulous preparation , and perfect execution......👍🇮🇲❤️

[@gabesmith654]

Nice lift as always!!! I feel bad for the farmer though that's a tremendous loss even with insurance hope he was close to finished with harvest God bless

[@RonPratt]

Thank you for watching and God bless

[@bobbyg8190]

Great video Ron keep up the great work that one was quite the lift

[@richard9117]

Hi Ron I just want to say watch your videos all the time ,you are very professional an that's fantastic to see as well as your faith in jesus christ .some of the small phrases you use (God bless an have a great day)I now use with my family an it's a great way to start their day an mine as I believe too .. from Richard wellington new Zealand.

[@starlawilson4103]

As always...awesome!! Love how every video is a teaching experience and your amazing patience.

[@ricardoalvira1969]

Always safety first. Always a job well done. God bless Ron and Family

[@tractor180350]

Another fantastic job great teamwork with you and Talen not the best thing to lift but you did it, God bless and stay safe.

[@davep6977]

I've got to go there. Recovering that machine took a combined effort.

[@vickiemeeks5399]

You do such a awesome job. Love how you are so careful with everything. Thank you God bless you. Keep them coming. Husband and I watch together.

[@Baby_Valentine]

You guys were a lot closer to that combine while it was in the air, than I would have wanted to be.

[@philscomputers9671]

Love the video thanks for great Entertainment love to see more drone shots keep trucking your videos are the best of recovery thanks again for sharing

[@KyleE-pm1nt]

Can't wait for drone footage.

[@RonPratt]

Hopefully I'll get it posted. Thanks and God bless.

[@KyleE-pm1nt]

Thanks for producing all the great content.

[@busterboy7505]

Great job done Ron and Team, 👍🇺🇸🇬🇧🪝🪝🪝🪝.

[@robhampton4929]

Great Video Ron. Very clear with it recorded in 4K. "Stuart Little" comes out for a look at 15:00 .LOL He comes from under the stay where the angled blue line is. Cheers Rob.

[@toddbehrends1373]

Absolutely amazing what you can do!!!! What a lift!

[@RonPratt]

Thank you for watching and God bless

[@jenniferwalker501]

Very good job Ron and guys.. u all do such a great job

[@petejessop]

Good job all down the team work well done Ron

[@benthere8051]

The drone is going to be a great assist on your documentation. I would imagine that you need a gang of CYA photos and videos to support your work with the insurance companies. That dovetails very well with your KZbin videos. This is the first video I've seen where you have had to coordinate two big lift trucks. It went very well. It looks easy when everyone knows what they are doing. Enjoyed it. It did appear that communication was a small problem. Radios might help.

[@DIXIEDEW123]

This is fantastic!!! Ethan is really a pro on the drone. Can't wait to see his footage on this job. Stay safe n GOD Bless. :)

[@RonPratt]

Thank you for watching and God bless

[@anthonyrobertson1787]

Thanks Ron, for the video 🤔 that weather there, is summer time weather here in Alaska.great team work 🖒 PS here is talens 2 apples 🍏

[@RonPratt]

I'm not found of our summers here. 90-100 degrees Fahrenheit and high humidity. I prefer the cold. Thanks for watching and God Bless.

[@joshuaguthrie7259]

Hey Ron I love your videos be safe out there because a lot of people don't pay attention to the road. Keep it up with your great videos

[@nobull-dozer3356]

Excellent success . Well done Ron and crew , best wishes to you all .

[@RonPratt]

Thank you for watching and God bless

[@markverloop7002]

nice job Ron. you & tallon make a good team.

[@malikdigger4544]

Teamwork goes together smoothly awesome job.

[@dmau1]

Saudos from Argentina ron pratt, I really like his channel and his work is really good, very professional.

[@RonPratt]

Thanks for watching and God bless.

[@randyrudder2451]

Good team work and another safe job well done sir.

[@gorillaau]

Ethan is really coming along.. A job worth doing is a job worth doing well.

[@RonPratt]

Yep, Ethan is really growing up. He is taller than I am and will be old enough to get his driver's permit soon. I'm getting old....LOL.

[@edkaempf906]

So basically, the owner or lessor of the combine had no plans on how to move this or any other combine that might catch fire or otherwise become disabled. Thank goodness that the incredible Ron Pratt is in the area. He really saved the day (as he does in everyone of his videos). I really hope Ron's charge for this service reflects all of his preparation and costs, including the depreciation on trucks, like his $750,000 rotator.

[@derekhuber3392]

I’ve experienced a machinery fire. It’s scary how fast a machine goes up. By nature these things are covering in oil and grease. From “something smells hot” to “smoke” to “completely engulfed was around a minute. A neighbor happened to drive by, he had a couple shovels in his truck. We were able to get dirt on the tires and save them.

[@nancylpowers4778]

Enjoyed the video...The word problem is not in Ron's vocabulary.Just a situation to be solved The cold weather gear, yellow and black. Reminded me of, busy bumble bees at work. Congratulations on the 91K..Take care...God Bless...Be safe :-)

[@RonPratt]

Thank you all the way around for your nice comments. We are getting closer and closer to that 100k!!!! Thank you for watching and God bless

[@Tailss1]

That driver keeps going in there when you are lifting :O Bothered the hell out of me :/

[@rickb1973]

When the driver's under there, pushing that block in at 22:30 I'm wincing and thinking about those chains on rusty burned metal....makes me nervous as hell.

[@jasonpatterson8091]

I enjoy these videos and 100% think that he knows what he's doing, but it's also clear that Ron likes to run the show regardless of who he's working with. I was amused by Marty's lack of concern.

[@beenjammin1984]

I’d love to see the drone footage

[@slvalleyboy]

@@jasonpatterson8091 Ron is in charge, experience and common sense set him apart from many other bosses. I've had the other kinds and that was not good.

[@NZErehwon]

Ron & Crew what a great job stay safe out there!!

[@donnamckinney5241]

Having watch heavy equipment being loaded , this has been precision job.

[@BenAran426]

Anyone else just hit the like button before the trumpet's end

[@RonPratt]

Awesome...Thank you. God Bless.

[@BenAran426]

No thank you sir. My grandfather drove wreckers in the Marines so he always had stories whenever we passed some on the road. And when he died last summer I was scrolling threw KZbin looking at old video's and then found your channel and I haven't missed video since

[@excavatoree]

Yep. Saves time. We all know it's going to be good. Poetry in motion. Ron and his team are first class.

[@chrisretusn]

I hit it before the video starts. I know I'm gonna like it. 🖒

[@erikjohansson1814]

Yup, each and every time.

[@Wolfiejohn]

good work glad every1 was safe and the drone is kewl hovering in the foreground of ur cam thanks ron

[@RonPratt]

Thanks for watching and God bless.

[@TheEasterBunny69]

Leave it to Midwest Truck to execute a job so excellently well done

[@RonPratt]

Thank you for watching and God bless

[@kartikshankar5790]

Another great video. Amazing and so so professional. Love watching your videos and you at work. Keep them coming Ron. As always Good bless you and protect you. Regards from India

[@RonPratt]

Thank you very much. God bless.

[@crapper1]

That had to be the sickest feeling for that farmer knowing not only his machine but valuable payload was going up in flames glad it was a safe transfer to the scrap yard