After $100,000, the one boot I don't want to cut - Russell Moccasin

[@RoseAnvil]

Get new Rose Anvil leather Boot Breaker Insoles to help make your boots and shoes last longer here - bit.ly/3NHTfkw Get The Professional Hunter boot here - bit.ly/48mfWof

[@c-w-h]

I really like this boot. Dont own one though. But I would wear waterproof socks with it for sure. The advantage to this boot. It can dry out quickly. Keeping your feet dry. If they do get wet. Have an extra dry pair ready to go. They call it a hunter. But its really a trail moccasin. I would expect germans and austrians to like this boot. They like to go on long hikes. They dont walk slow. The older men dont like heavy boots on a volkswalk.

[@stratobungle]

I was very glad to see those insoles that you offer - however I would absolutely LOVE to find insoles like those that came in a pair of Snipe-branded casual boots that were felt on one side and leather on the other - you could flip them over based on the outside temperature or just your preference. I picked those shoes up probably 15 years ago on a trip to Germany to visit relatives, they were made in Portugal. The style I have are no longer available but Snipe still has a German website that carries other models, including some barefoot styles.

[@fmcdomer]

VISVIM

[@robertnunes1948]

Not going to lie, I never had a problem watching you cut other boots...this one was painful as hell.

[@rever6612]

Guys, you swapped the axis in the graph at 12:40. If you are saying that the first couple hundred dollars give the highest jump in quality, "Quality" should be in the X-axis and "Quality" in the Y-axis.

[@ashtmslf2315]

Please cut some Rick Owens shoes in half, I'm really interested to see what's in them, especially as a lot of people say Rick Owens leather is really good!

[@vimalwalkerable]

I agree! Especially the blistered leather or transparent leather

[@inflamesnightrage]

I agree too, I am specially interested in the construction quality, leather could be as good as it gets, but if they are poorly manufactured they are not worthy

[@vimalwalkerable]

@@inflamesnightrage from my personal experience it’s just a hollow TPU sole that’s half stiched onto to the upper. The rubber wears away like an eraser 🤦🏽‍♂️

[@sangwonpark8967]

I had a couple, the leather quality is really good but the overall construction and comfort is quite bad

[@user-iw4uq5dl8t]

Make sure it’s a main line and not dark shadow

[@jordiw3692]

Purchased a pair of Russell Moccasin Backcountry boots based on your previous video. They are in fact the most comfortable shoe or boot I’ve ever worn. It’s a shame the video does not have more views, but I’m sure I’m not the only one who became a RM customer based on watching it. Hat tip to RM, and to Rose Anvil for taking to the time to explain and demonstrate their quality.

[@gnarl12]

Russel makes great stuff. Expensive but once you realize just how labor intensive they are you understand.

[@papatorr3669]

Since Russell makes one boot at a time, ask them to make one boot to replace the one you cut!

[@stevenelias5633]

My family has worked for Joe at Russell for years. Berlin, WI is my hometown. Joe allowed me to be an apprentice for my cousin at Russel for a short time before I followed an automotive career. My parents worked for Berlin Glove as well. I have learned to appreciate quality leather goods from my parents. I am a huge fan of Rose Anvil it is so great to see Russel Moccasin being appreciated!

[@sinnombre2147]

I own a pair of Russell PH’s and you absolutely described them as accurately as anyone ever has. Sold as a boot, but not even close to a boot. It’s like a Converse Chuck Taylor high top being compared with all the Air Jordan’s out there, look similar, but the feel is worlds apart.

[@nicholaspietrzak9992]

Kinda seem like leather moc chuck Taylor’s lol

[@gnarl12]

Yep it's a tough leather sock with a sole attached

[@Sideshow_77]

The graph is backwards! It’s saying an initial increase in price reflects little in quality improvement. Price should be on the X axis, and quality on the Y.

[@KomalPatel]

Yeah looooll

[@Old_Sailor85]

100%

[@ZJones29]

I was about to make the same comment! 😂

[@jimballinger68]

Hi, I like your "bootbreaker". in fact, I have been using my own versions for years, you need to market them with the additional benefit they have, and that is the thermal insulation they add to the boot sole. I found that by accident, the best I found was a layer of closed cell foam in a very small cell formulation. The most easily found is thin yoga mat found at Goodwill or other second hand stores, your pre cut design is perfect, and that added thermal insulation makes a new hard insole boot incredibly better in cushioning the heel and ball the foot and helps comfort due to warmth added in the same points that bear the most weight. The leather you offer is really nice, old boots I have owned conform too well after years, transferring nails that were a little high right through to the foot, and that little hard point is an insideous discomfort, your "bootbreaker",is also a "boot life extender", Leather in the right thickness and flexibility/hardness, is a lot harder to come by and your product is a slip in and go with an option to add a foam for more comformability and warmth in an instant. Good luck, I'm going to look into ordering some of yours in both leather and foam, I'm always scavenging or buying a new foam material to try! If it is too soft it just moves around in your boot like a bad sock, but if stiff enough it stays in place and conforms to the foot quickly and adds warmth instantly. By the way, I use them in all types of shoe, not just boots!!

[@collinrichards5299]

The new Thursday black label challengers would be cool to see

[@thartwig]

any black label tbh, just to see if theyre really worth it or cutting corners with an even more expensive boot.

[@leonidas-spearhead]

Hero boot would be nice

[@TheMIghtyElmo]

It's already cut in half on the website.

[@thartwig]

@@TheMIghtyElmo true, BUT, the cross section for the Journeyman black label chelsea isnt the production boot, the production is a single piece of leather, and the cross section clearly has a seem at the elastic. I wanna believe thursday is honest as ive owned two pairs of their boots, but the shoe industry is full of liars and marketing fluff. Edit: maybe im just dumb though and the seam is for the interior liners who knows lol, gotta cut one in half

[@scottharris9318]

I bought a pair of Russell’s Pro Hunter boots in 14D based on your review. My daily wear are Danner Bull Run moc toes and Nick’s Travelers in Moc Toe. Have had the Russell’s PH for a week. Absolutely love them. If I had to choose one shoe for the rest of my life these would be an easy choice. Thanks so much for your detailed review.

[@Redgogrey]

My heart goes out to you and the boots. I own a pair and I think they are the most comfortable of footwear I own pr ever made.

[@jeremycorvialis4085]

I am so glad you've brought this brand to my attention. Getting a pair is just a matter of time for me.

[@gunner76]

My first pair were the Oneida Moccasin, and after wearing them for one week, I purchased their B-52 Loafer Classic. I then bought their Travelling Sportsman Classic Build because Russell Moccasin's are that good. Once you buy one pair, you will want more!!

[@jagriffin1]

Got my Russell moccasins a month ago and LOVE them!

Really interested in seeing what is in a Visvim boot. For example a Virgil folks in kangaroo leather would be a great cut in half.

[@morningfolks2816]

seconding this! or any jp makers such as clinch, rolling dub. or even john lofgrens.

[@anthonyschroepfer5776]

You know something, those boots are brilliant. If only I had $750.00 laying around.

[@StevOPelO]

Always incredible! I get my Nick's custom lace up in about 6 months.. Out that's when they will start construction! Super stoked! I'll be getting some boot breakers soon

[@devenscience8894]

Okay, this video reeeaaally has me wanting a pair of these.

[@itsaflyboything]

would love to see some winter stuff next. a lot of it is synthetic materials (which is fine considering that places use salt and gravel and such to deal with ice and snow), but I'd love to see what those vibram ice+ outsoles are made of, as well as some hiking boot companies offering "winter" rubber compounds. things like the merrell coldpack thermo moc high (hey some crossover!), as well as the moab thermo (ice+ vs plain rubber). similarly the keen revel/anchorage, salomon toundra, etc etc from the usual supsect hiking boot makers, and of course some baffin/sorel/kammik etc for the extreme winter category.

[@hansmemling7605]

I don’t cut shoes open but I do wear my shoes out in less than a year generally. I can recommend you two brands for their affordability yet durability for the price: Redback ( model ubok, rose anvil has cut them open) and Panama jack. Both are the only pairs that still last me.

[@williamhancock9587]

I just received my first pair of Truman Boots and I got their Moc Toe Black Oiled Rough Out on their 20 last. I think they are The Best Moc Toe Boot for the money!!! The fit is awesome and cannot wait to break them in during the next couple of months.

[@markvanderlinde281]

I have a pair of these and the Backcountry. I can feel the vibram sole lugs especially in city use. I prefer the Backcountry for feel and fit.

[@danielrobayo2548]

When the channel reaches 1M I'd like to see the Air Jordan 1 Dior. I think it'd be interesting to know the leather quality in that pair of sneakers and if they are worth the 2000 retail price

[@pm-yp5ri]

Would be cool to see, but spoiler... no sneaker is worth 2k

[@Kingyayaa]

It will be no different than every other Jordan.

[@Yesi_No_Waves]

I worked at The RealReal and handled the hi and low top Dior 1's and they are definitely nothing special. They are a huge let down especially for what we had them priced at lol.

[@toddrklein3188]

Appreciate your channel and what out do to educate and showcase and encourage the industry to make better footwear.

[@griffinsewell410]

Vivobarefoot just came out with a moccasin-inspired shoe. Just in time for Moctober I’m thinking.

[@kylegrishen3543]

I can't say I'm a fan of them aesthetically at all, but hear nothing but good things about them.

[@janibeg3247]

i have a pair of Russell bird shooters i purchased in 1971. Beatup but still functional. no cushioning in the boot - have to put in an insole

[@briangschaefer7048]

I really felt your pain.... so thank you very much for another great and informative video.

[@ltsmash1200]

I just got a pair of Backcountries and I absolutely love them. They’re so comfortable. I’ve already gone on a couple of hikes. I want to get another pair of something from them for daily wear. I’m torn between the Trail Boot and the Traveling Sportsman.

[@chrishildreth9239]

I am also torn between the Trail Boot and the Traveling Sportsman! Difficult decision.

[@ltsmash1200]

@@chrishildreth9239Yeah I think the Sportsman might be better for daily wear but the I like how the Trail boots are rough outs and they’re probably better for if I want to wear something lighter than the Backcountry to hike in the summer.

[@jeremiahmclane2374]

These are the boots I want the most, but I am banned by the wife after, 4 custom Jim Greens, 2 JK Buffalo and Redwing moctoes, because of your channel!

[@aredoplloci8459]

I've been looking for a piece of leather to put in my mugs v1 and you actually released one, nice

[@TylerSnyder305]

You need to cut open a Gokey boot. They're less expensive than Russell and I'm curious how they compare.

[@petersimeone3491]

Agree! I have both Gokeys and Russells

[@Pillsbury666]

@@petersimeone3491 what sizing did you go with on the gokey?

[@petersimeone3491]

@@Pillsbury666 Im an 11D Brannock and got an 11.5D Gokey. I find they run small, esp compared to PNW boots that run big. But I think true mocs are supposed to fit snugger, hence maybe running small. Then again, Russell’s run true or 1/2 size big so go figure!! I had to put an insole in My 11D Russell’s.

[@petersimeone3491]

@@Pillsbury666 I will also say that I had the single vamp Gokey. If it had a molded sole, I might have gone another 1/2 up. The single vamp is very accommodating. Molded sole, less so.

[@petersimeone3491]

@@Pillsbury666 not sure my first reply got posted. My Gokey are 1/2 up from Brannock. And they’re snug. Not like PNW boots where you go 1/2 down and they’re roomy.

[@honestreviewer3283]

They're beautiful! Have you ever done Aldens? I am lucky enough to have a few pairs of their shoes and the only time I had a problem I sent them back and they returned them to me completely refurbished for free; they were like brand-new. I will always try to support American manufacturers like Russell and Alden.

[@mantorok09]

That Price vs Quality graph was backwards. If you’re saying that the quality growth outpaces the price, you should see a flatter curve in the beginning where the x-axis value is increasing faster than the y-axis. Or just swap the quality to the y-axis and the price to the x-axis and then the graph would fit as plotted . Not trying to be a pedantic tool, just trying to help out. Great video! Heartbreaking to see those cut.

[@gentensworld]

I'd love to see you cut Cariuma OCA low sneakers in half. For being $90+ they fall apart super easily and feel pretty cheap. I'd like to know more of what's inside of them that helps them stay super comfy, but ultimately can't seem to help them stay together.

[@bronco1199]

Your channel has shattered my delusions of what hand made really is. I will never buy a pair of boots without checking your library.

[@justincadotte3484]

The graphics are next-level on this one.

[@rever6612]

But one is wrong 12:40

[@curgunner]

I would love to see you cut open the Waxi boots from Kommandostore. Genuinely a great value at least in my use, but very different from a normal boot.

[@kerryrwac]

That bell curve of diminishing returns, is the same in knife collecting.

[@tonyp.bahama9368]

Goes for most stuff, cigars, alcohol, jeans for example

[@MAI-zl3li]

This will get lost in the comments but it's worth a shot. More than a cutting video what would be awesome is a Brannock device education video. I just found out that going off larger arch length size vs foot length being a thing and I'm kind of mind blown. I've been wearing incorrect sizing forever and with the lots of brands I've been gravitating towards recommending to size down it's only worse. FWIW I found out when I went in and got sized and red wing.

[@couchsofa2977]

nice boot if you want a sneaker like boot. love your videos, but i would not my kind of boot. excited for your next video. keep them coming.

[@kart182]

Love the boots, the video effects and the review

[@BigTree412]

You got to do the full grain leather timberland boots I just bought a brown pair they look so cool you can really see the grain in it ..

[@howardwmoore]

Ok I felt some pain when you cut my redwings in half but I dam near cried when you cut the Russel’s A pair of black fishing oxfords are on my wish list lol

[@davidcarpenters7031]

Have Russell’s..older style..Gokey and Schnees…all great boots.. Can no longer get custom Russell’s mine a1/2 size different from right to left they no longer offer that = not custom but off the rack sizes..Schnees a great boot number one of the Three..quality and price..

[@rickyreed2579]

I wanted to say how much I enjoy watching your reviews . Really nice job. 👍 is there a site that you would recommend for selling gently used boots?

[@SapperRJMorgan]

We need more things like this in life.

[@rever6612]

Guys, you swapped the axis in the graph in 12:40. If you are saying that the first couple hundred dollars give the highest jump in quality, "Quality" should be in the X-axis and "Quality" in the Y-axis.

[@davidr9876]

Yes. The graphic showed price leveling out while quality continued to increase.

[@jrobertb]

Russell’s are pretty much a loafer you can lace up and wear quail hunting or to church. Worth the money for the comfort and longevity that you’re buying. Customer service is top notch on resoles, too.

[@Vanadium]

Great presentation of shoes as always. I would like to see some Mountain bike Flat pedal shoes cut. They should also be different enough compared to most shoes. Some kind of 5.10/Adidas Trailcross or the 5.10 OG shoes? Would be really cool to see why their rubber sole is still one of the best rubbers on the marked.

[@joaolobo6720]

I have a pair of Backcountries on their way, they should be done in January, its gonna be like second Christmas

[@John_F_Hennessy.]

Lovely pair of Mocs. Look very comfortable.

[@Godscaliber1911]

I’m so excited for the Jim Green Meander

[@chipcook5346]

Russell is the best shoe I have ever owned.

[@MaineMan2023]

I could feel the pain cutting those beautiful boots apart! In Maine, we would call those a pair of hunting boots. Also hunting shoes.

[@Noumenon4Idolatry]

Very cool. Thanks for sharing…. These are on my list. ✌️

[@alexandermcabee3549]

Kreosote Nail Shank Boots. probably the coolest most over built boot I've ever seen. Would make a great $100,000 milestone!

[@patricklary81]

Your a better man than i am. If it fits me and its something i like or want, theres no way i could cut it in half.

[@likeadog7752]

Then Jim Green comes along and mass producing a true moccasin construction boot. Can't wait to get my hands on those and them on my feet!

[@rd010123]

So close to 1 mill! Lets go!

[@adamgtrap]

My suggestions are either the Asics Gel Kayano, or Scarpa Chimera. I know that Scarpa will not get picked, I just think it would be interesting to see you try to a video about a climbing shoe.

[@werdnadragaa]

Also, for a channel that feasts on leather and boots, I’m surprised that Frye hasn’t ever come up

[@milddisgrace8462]

I would really like to see some Drew’s logging boots cut in half. I feel like they’re a brand not many people know about and I think that they’re a great product especially when accounting for their quality and price.

[@AndriiPyndyk]

Congrats on 100k! Try to cut in half Zamberlan Tofane boots. Resolable, heavy, durable and pricey as hell.

[@Friday_V7]

KURU Shoes would make a GREAT dissection video. Cool tech

[@billystpaul8907]

Black Label Thursdays in the Shinki Cordovan leather and some Viberg's to see if they are worth the money. They just started making my pair of boots at Russell. I can't wait to have them. And, this will be your 3rd pair of Russell's that you cut in half. I am now braking in my Thursday Challenger boots in the CF Stead leather. They like a pair of Nicks. Would like to see you do a video on them.

[@RH-hz9ly]

The Onitsuka Tiger Mexico 66. The SD or classic one, up to you

[@adrianlopez6317]

Italian footwear like Bocache & Salvucci, Butero, Brunello Cucinelli, Bottega Veneta.

[@Paul-jo5gq]

Made in NH, US Limmer Boots Custom.

[@petersimeone3491]

Or even the off the shelf Meindl boots that Limmer sells

[@Paul-jo5gq]

@@petersimeone3491 Custom ones have a bit thicker innersole (4 vs 3.5 mm) and heel counter (2.8 vs 2.5 mm), steel vs nylon shank, different midsole, different leather and reinforcements. It's those 80/20 with the custom ones having extra % of toughness. Close to 3 years waiting though...

[@MichaelKuczynski-u7o]

Nice review, this is a boot I’ve always wanted but never owned . Don’t know is you cut a pair of White Nomad boots , I would be interested to see how they are constructed. Thanks for sharing

[@muskett4108]

People spend more on truck tyres; these last longer and give a better, the most comfortable, all terrain ride. The original adventure sneaker, from before the world turned plastic. Russell Moccasins, much love from the UK.

[@w.c.russellmoccasinco]

Thank you!

[@jay_watch]

Hey Weston, let's cut the New Balance Rainier in the OG colorway with the full grain leather and cordura upper!

[@1htalp9]

You deserve to keep that pair of Russell's for yourself!

[@wrandom4932]

I’d love to see if you could cut a pair of redwing’s flagship supersole 2.0 and compare them to other $300 boots.

[@aurtisanminer2827]

I’d love to get a pair of these sometime!

[@elsuaverteur]

Oree NYC makes some cool cordovan leather derbies, which they artificially age up. Would be really cool to see those in the future

[@JinsKookieJams]

*These boots awesome!! I'd love a pair if I can afford them lol 😅🤣🤣! It's also customizable on their website which is really cool! For a future video it would be cool to see the Challenger boot by Thursday! Yes I know they have a photo of ine cut in half on their website. I want to see what Weston has to say about their build.*

[@KR-bn4bg]

I can't wait for he Jim Green moc toe to come out!

[@jtm2957]

Hey really enjoy these videos! If you are open to suggestions, I’d love to see the LuosJiet boots looked at with scrutiny lol! Thanks for the content.

[@cmora316]

AND......Once agian .... the USMC Rat boot is the toughest boot made yet... not a moc toe but amazing

[@scottjohnson360]

Cut those new boots! We gotta see what’s in ‘em!

[@TwitchRadio]

Sounds like the perfect boot for me.. Too bad I will never be able to afford them😢

[@PooMuncher-q1l]

When you cut boots why don’t you keep the laces. Just wondering.

[@StreetSoldierUK]

I’ve seen many channels being sponsored by Vessi footwear, be interesting to see what they’re actually like cut open.

[@ThomasHartley-o2j]

Can you please get a pair or two of Gokey USA boots? the Tipton work boot and their safari boot would be cool.

[@gnarl12]

The Joe's PH is made to be essentially a big tough leather and canvas sock....

[@collinhenderson871]

You should do a comparison or cut apart the luosjiet Indy boot!

[@thor4odin749]

I see Thursday dropped a new boot....they even cut them in half and posted the pic for your inspection. Did U throw them that idea?? Nice....

[@robertmoore5048]

Please cut the new Thursday Challenger boot next! Brand new from Thursday

[@jesseshort8]

I've been wanting some thick leather insoles to try before I jumped into an expensive pair of boots.

[@mondobizarrro5468]

for a sneaker id love to see you cut an old running shoe from the 70s, like a nike ld-1000 waffle trainer, or new balance 320/237/327 for a boot id love to see you cut some sort of military boot. doesnt matter which one

[@handybunny]

Sweet boot. I’d love you to review Red Wing Roughneck, more my price range…

[@kinderwaff]

These are so unique!

[@davidhunternyc1]

Wow, the Russell Moccasin is so much better than LL Bean boots !!!

[@scottpattinson8134]

I’d like to see luos jiet and how they compare to Thursday in the 200 category. Also a pair of Bordon and unmarked. Be interested to see how those two compare to their more expensive counterparts

[@arturogranados847]

You should do double H boots I been wearing them for years at work the Wooten style and it’s been a pretty good boot over all .

[@dagttv]

We all know Wes has a crispy pair of Russell’s in the box that he isn’t telling us about ;). I personally want to see a pair of Courteney boots cut in half next. They are the similarly priced and also handmade South African safari version of Russell’s and they come in some WILD game leathers.

[@ecbh1214]

I have a pair of Courteney Selous in Cape Buffalo. The most comfortable footwear I have, but the black rubber soles mark tiled floors mercilessly. Quite a bit cheaper than Russells at $330, and 360 stitch down construction.

[@dagttv]

@@ecbh1214 awesome! I don’t think Courteney had indoor floors in mind when creating an African hunting/safari shoe. Yes their base models are cheaper but they have a custom department which rivals Russel prices. I’d love to own a pair and I’d love to see them analyzed on this channel.

[@BORIS21610]

You can cut Premiata they are quite expensive for the material and labour

[@Testbug-dy6tj]

Old mock, love these boots

[@DavesIneosGrenadier]

I have never heard or Russell Moccasins in Australia and they don't list a distributor or an outlet in Australia that I could find.

[@phantomen1374]

Please try cutting some Timberland Premium HELCOR 6 Inch boots in half. The helcor leather is scuff proof, fireproof, and waterproof so your knife won't even make a dent on the leather.