Rotary Bum Premix Measurement Bottle Kit Review

  Рет қаралды 22,898

Shooting Cars

Shooting Cars

Күн бұрын

Пікірлер: 67
@erniediaz894
@erniediaz894 8 жыл бұрын
I spent 2500 on my 13B rebuild so don't feel bad yet. I have use the same premix and have had no issues in 500 miles. I use 1oz per gallon but I have a RX2.
@shellite
@shellite 8 жыл бұрын
I have only ever owned and driven rotaries my entire driving life, never premixed in any of my cars, never had a failure of an OMP... one of my cars (first gen) I daily drove for 11 years, 16 years later still running strong, with its OMP. OMP is far more convenient and less prone to error... it also won't forget to add oil and won't get the dosage wrong 😉
@Malibus_Most_Wanted
@Malibus_Most_Wanted 7 жыл бұрын
shellite I still premix with a omp just that the car had been sitting and only has just 50k mileage it's still almost 40yrs old
@kzz8971
@kzz8971 3 жыл бұрын
@shellite Are you using a Sohn Adapter as well?
@blyndrotor
@blyndrotor 7 жыл бұрын
Not just milliliters thats popular with us in Australia. We use the whole damn metric system. Everything is based on 0-100. So much simpler.
@someweeb3650
@someweeb3650 7 жыл бұрын
3:59 How hard was it to not say "BUT WAIT, CALL NOW AND WE'LL DOUBLE THE OFFER!!"?
@uralportlockjr.7928
@uralportlockjr.7928 5 жыл бұрын
How can I contact you.
@Rotary12A
@Rotary12A 6 жыл бұрын
I use the mazdatrix bottle it’s 16oz and I don’t gotta have more then one bottle
@Sir.Munoz.1117
@Sir.Munoz.1117 8 жыл бұрын
as for synthetics, correct me if im wrong but i have done research on it and found its additives make the build up? IMO as long as she has oil and is properly lubed through the plug holes and hand spun after along sit your good to go.
@Sir.Munoz.1117
@Sir.Munoz.1117 8 жыл бұрын
ive had a rotary for 5 years,1st gen specifically with a 12a, never premixed ever! heard its like alcohol to a cut, you dont always need it but cant go wrong with it
@Malibus_Most_Wanted
@Malibus_Most_Wanted 7 жыл бұрын
David Munoz idk I do it in mine just in case the omp isn't working and I don't know I'm not doing a full accuracy 1oz to 1 gal I just put in enough to know that the seals are well lubed
@Sir.Munoz.1117
@Sir.Munoz.1117 7 жыл бұрын
Thats a great point i cant even argue with that for the peace of mind
@spishco
@spishco 7 жыл бұрын
Pretty much everywhere else in the world uses the Metric system ;) Thanks for posting this, starting to premix my 12A now. Peace of mind for sure.
@Rotary12A
@Rotary12A 5 жыл бұрын
I have a 12a as well a streetported one great engine
@Handyman1199
@Handyman1199 4 жыл бұрын
I just bought an 1980 SA with 12A in it. Less than 10.000km since last rebuild but it has been sitting for 20 Years. I’ll probably delete the OMP and premix it with semi synthetic 1:100 (a little more oil than Zack here). I don’t have the money for an apex seal kit, should I still prep the engine for a rebuild or am I good to go 20 years and 10.000km since the last (Professional) rebuild? The engine is full of fogging oil to prevent rust... I know that I have to at least clean the carb to make it run
@GTarditi
@GTarditi 8 жыл бұрын
I heard synthetic oil was bad for rotaries as it doesn't combust and when left in rotaries it can't be properly cycled through the engine and builds up over time. Might only be for your main supply or it could be a load of Internet bollocks, who knows?
@Malibus_Most_Wanted
@Malibus_Most_Wanted 7 жыл бұрын
1488cc Wankel rotary yea I've heard that they say to use mineral based oil I just use the basic shit from walmart you can get a precise mix bottle and it makes life easy but mines also a stock 12a so I don't think it really needs fancy oil for premixing
@OfficialSVSTAIN
@OfficialSVSTAIN 7 жыл бұрын
1488cc Wankel rotary I use royal purple in mine and I've never had a problem. Royal Purple has a page on their website about running it in rotaries and plus Racing Beat sells it in their rotary catalog.
@spishco
@spishco 7 жыл бұрын
this is 2 stroke oil, it's designed to burn!
@willybman3723
@willybman3723 6 жыл бұрын
@Joby Fluorine u an expert?
@haazizhahamid6274
@haazizhahamid6274 2 жыл бұрын
Can I premix with 2T motorcycle oil to RX8 engine?
@oliverscorsim
@oliverscorsim 2 жыл бұрын
I run the cheapest stuff I can find and run 1.5oz per gal but the car always gets run dumb hard. I'm currently moding the omp to pull from a tank for the new motor. Since the injectors dont fire when off throttle I don't think just premix is a great solution unless carbed. Even with the omp I'm still gonna run .75oz per gal. Great vid and I do love the bottles I always had a messy storage compartment in my fc because of this lol.
@ChErRyaVe20pK
@ChErRyaVe20pK Жыл бұрын
I dont think this is true. Atleast with 13b rew engines. The fuel injectors stay open even off the throttle.
@oliverscorsim
@oliverscorsim Жыл бұрын
@@ChErRyaVe20pK they don't for long when you get the tps reading down to idle and load is negative it cuts fuel almost all efi cars from the factory do this.
@ChErRyaVe20pK
@ChErRyaVe20pK Жыл бұрын
@@oliverscorsim Do you know if aftermarket ECU's can solve this problem?
@oliverscorsim
@oliverscorsim Жыл бұрын
@@ChErRyaVe20pK they can but it's not really a problem for most honestly Mazda already solved it with their omp. I personally just modify them to draw from a tank of premix and this is the only better version of what Mazda did. It's hard to beat the engineers that built it. Carbs would be the best solution all around for road racing if you rev it high but if you don't have a fancy eshaft your not gonna rev that high. My first nice na halfbridge had a stock shaft and we threw some carbon seals at it and the rest of what you need to make it somewhat reliable. We reved that thing to 13k until a shaft moved alitte too much and a rotor ate the iron. This was a drag engine so it didn't get the engine braking treatment like a road race motor would. In short modify your omp rotary aviation sells a nice kit if you can modify your stock one.
@dariomendoza6250
@dariomendoza6250 8 жыл бұрын
How often do you premix?
@ShootingCars
@ShootingCars 8 жыл бұрын
DARIO MENDOZA every fill up
@benstevenz
@benstevenz 4 жыл бұрын
Half oz per gallon so 13 gallons so 6oz a fill up ?
@THEBOSS7223
@THEBOSS7223 5 жыл бұрын
I just bought a RX8 5 speed manual 2003 should I premix even though the oil pump works how much would you recommend and I'm going to pick up the car on Saturday
@Snow1998v1
@Snow1998v1 4 жыл бұрын
yes you should. 200ml or around 7 oz per full tank is enough
@brokemanracing5644
@brokemanracing5644 8 жыл бұрын
Thanks for the review I'll run this and my stock mop which will probably be a life saver for my engine best part about having an s4 engine is that the omg Is manual like the old s3 engines
@t-money10
@t-money10 4 жыл бұрын
I can't find this rotary bum stuff no more only mazdatrix sell them
@jgtr681
@jgtr681 6 жыл бұрын
Hey @Shooting Cars !! I Have a question I have a Rx8 with 114 miles and I have a question I am know with rotary Cars and it has 10w30 SYNTHETIC OIL , what you recommend me to put !! And jefe a new suscriber !!! 👍👍
@ShootingCars
@ShootingCars 6 жыл бұрын
For engine oil I use 20w50. for premix I use idumitsu rotary premix
@azizizul720
@azizizul720 5 жыл бұрын
It's eee-dae-meet-su Anyway I'm around 1/2 to 3/4 oz. since my engine are still stock, doing an oz makes my car smokey
@CorruptInfinityOfficial
@CorruptInfinityOfficial 5 жыл бұрын
At least you take care of your shit, some people don’t delete the weakest links and then complain about the platform they chose 😂 you probably understand like the rx-8 oil squirters
@OfficialSVSTAIN
@OfficialSVSTAIN 7 жыл бұрын
Don't say OMP Pump, it's just OMP. It's the same as saying ATM Machine or PIN Number.
@illegalmodsquad
@illegalmodsquad 5 жыл бұрын
or like when people say "RPMs" instead of "RPM" "Revolutions Per MinuteS" isnt a thing.
@Rotary12A
@Rotary12A 5 жыл бұрын
Nice fb
@dracine74
@dracine74 4 жыл бұрын
Website dont work
@corriejacobs5876
@corriejacobs5876 5 жыл бұрын
If you do not know what the correct amount pre-mixe is why you advertise the oil
@chrisroman4639
@chrisroman4639 8 жыл бұрын
very clean I like it
@3xkillsonYU
@3xkillsonYU 7 жыл бұрын
its definitely awkward in Nj where you can't fill your own gas. I don't know why you would feel awkward anywhere else. I gotta be like "wait let me do something" to the guy filling my gas 😂😂
@rotarycomptech
@rotarycomptech 7 жыл бұрын
Thats fucked up in NJ no self serve?
@adamdelgado296
@adamdelgado296 5 жыл бұрын
Same Thing In Oregon, It's Not Self Serve! Lame For Sure
@Trump-tq5ue
@Trump-tq5ue 4 жыл бұрын
I want to know if my car is doing it by it self scary 🙉😂
@thelonewanderer420
@thelonewanderer420 7 жыл бұрын
Salesman mode at 3:58
@joeymolnar8450
@joeymolnar8450 8 жыл бұрын
Audio is still not synced
@ShootingCars
@ShootingCars 8 жыл бұрын
Joey Molnar it is on mine. Hmm...
@joeymolnar8450
@joeymolnar8450 8 жыл бұрын
hmm that is strange, your last video the audio is off as well I'll have to try an on a different computer to check
@ShootingCars
@ShootingCars 8 жыл бұрын
it just happened to me once, refreshed it, and it worked fine. I'll look into it thank you!
@joeymolnar8450
@joeymolnar8450 8 жыл бұрын
no problem man btw awesome content just bought my first fb and your videos while educating me really inspire me to do cool things!!
@ShootingCars
@ShootingCars 8 жыл бұрын
Joey Molnar thank you! New Rotary life tomorrow at 1pm central 😀
@HottakeUnderworld
@HottakeUnderworld 2 жыл бұрын
Used to be half the price a qt
@G10W.26
@G10W.26 2 жыл бұрын
bruh its 37.95 right now 2022
@Toms1934
@Toms1934 5 жыл бұрын
Look I'm I'm on engine no 2 2006 rx8 shinka .it's going to smoke. With more than 1 half oz per gal.and plugs will go out fast but cheaper than engine swaps .I got 52000 on the gen 3 4 port mazda put in under warranty.they leaned out the oil injection for emissions at the cost of engine life .mix and drive don't and buy engines run it like a chain saw.
@wyattmason3902
@wyattmason3902 6 жыл бұрын
Ee-dae-mee-t-su
@JamesMullarneyIsAFraud
@JamesMullarneyIsAFraud 4 ай бұрын
Dumbest name for a product ever. You can buy a sauce bottle off Temu for .30cents.
Fixing the BIGGEST Problems of the Rotary Engine
21:41
Rob Dahm
Рет қаралды 1,9 МЛН
Premix Your Rotary Engine! Here's Why
4:43
Kenny McKee
Рет қаралды 108 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
The Mazda RX-8 Is a Fun Car You Probably Shouldn't Buy
25:38
Doug DeMuro
Рет қаралды 2,6 МЛН
The Differences Between Bridgeported & Street Ported Rotary Engines
11:15
Looking inside an engine during cold start (-30 degrees)
15:30
Garage 54
Рет қаралды 4,1 МЛН
Rotary Premix: What Is It And How Does It Work?
5:53
Shooting Cars
Рет қаралды 48 М.
💬 Tuning a Rotary Engine - Technically Speaking
7:36
Haltech
Рет қаралды 335 М.
8-speed Mazda Rotary -Technology meets Performance
8:59
Fullboost
Рет қаралды 184 М.
How To Premix Your Rotary Engine | Step By Step Guide
3:29
Driven By Madness
Рет қаралды 106 М.
How Apex Seals Work In A Rotary Engine (RX7 RX8 13B Renesis)
6:17
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.