Royal Enfield Classic 350 Panniers - Unboxing and Fitting

Soft Military Style Panniers for the Royal Enfield Classic 350 from Hitchcocks Motorcycles
Panniers
accessories.hitchcocksmotorcy...
Pannier frames
accessories.hitchcocksmotorcy...

[@daveb835]

Good video. Getting the top shock nut back on is much easier with the pillion seat off. It's secured under the rider seat by a long bolt, which you need to remove. Slacken off the two top shock nuts and the pillion seat then slides backwards and off. Worth getting a couple of coats of polish on the rear mudguard whilst the pillion seat's off as well.

[@thebingleywheeler]

Cheers Dave that makes complete sense…..instructions don’t mention the retaining nut and this gives the impression that the bolt is threaded into the frame….right hand side of mine was stressed too so the nut flew off at an alarming speed 😂

[@willg4944]

Thanks mate, I just bought a set of those and really appreciate the install tips. 😊

[@bikahjoeUK]

Excellent video: clear and comprehensive instructions. These pannier racks have just come back into stock at Hitchcocks so I've ordered a set along with some black (only colour they have left at the moment) pannier bags. Looking forward to having the increased luggage capability and finally getting free of always wearing a backpack wherever I go. Cheers!

[@thebingleywheeler]

Thank you for those kind comments much appreciated…..it’s great kit with a proper period look and surprise how much you can get in them

[@michealgillman7418]

Hi, in addition to my previous comment I just wanted to say thanks for seeing what's involved, also to confirm to anyone who has concerns. I did both mine in under an hour and it was very straightforward. Just follow the video and the instructions and it all came together nicely. Just one point. I personally found the most tricky part was getting the special (slim nut, that's supplied in the fixing kits) on the bottom mount, near the rear footrest on, as the space behind the frame is very tight. Hence why they supply a slim nut and short allen bolt I guess. This aside it's and easy job, just take your time. Thanks once again. Mick

[@thebingleywheeler]

Thank you Mick really glad you found that useful 😎👍🏻

[@adrianstrand1120]

Excellent instructional video, fitted my frames today easily enough though hadn’t seen a video such as yours, I used a telescopic magnet to position the awkward shock mount inside nut while the bolt engaged, it worked very well. Struggling to get the olive panniers as out of stock at Hitchcocks as they are apparently re designing them and some months before they are available, so will source from India.

[@ericsissenwein3601]

Nice job. I think instead of a ratchet - wrench it might go easier to use a socket, extension and driver. Less activity that might scratch the paint if it slips. Just my 2 cents. 😊

[@JohnSmith-xw5qe]

Well presented video & a great quality bit of kit & should last for many years making it good value for money! Looks great!

[@thebingleywheeler]

Thank you John much appreciated 👍🏻

[@paulclarke1233]

Hi bingley wheeler , great vid and well put over . It's good to see a halcyon green 350 classic because I am thinking about getting one

[@thebingleywheeler]

Many thanks Paul it’s a lovely little bike 👍🏻

[@marceloribeirodeoliveira4662]

Thanks

[@BobfmBali]

Great video. Point to note is that it becomes impossible to adjust the shock preload with pannier frames. Additionally I made some inserts from wood to give the soft panniers some permanent shape.

[@thebingleywheeler]

That’s a good point indeed and wooden inserts a great idea to keep the shape 👍🏻

[@thesilverfoxtravels6653]

Excellent job there. I have the same panniers from Hitchcock’s but the instructions I received were nothing like the ones you had. Mine were basic to the point of useless. 👍

[@thebingleywheeler]

@@thesilverfoxtravels6653 I’m guessing you got the RE instructions not Hitchcocks own 😀

[@thesilverfoxtravels6653]

@@thebingleywheeler yes I think so but I managed without it. 👍

[@scottboettcher]

I'll go further - it's impossible to set the preload period! I could not get the crappy RE wrench to grasp the teeth on the shock so I was only able to get it up one notch. That alone makes me want to replace the shocks with something I can adjust. It's literally the only gripe I have with this bike!!! Ride Safe 🙏🏼

[@albertjacktsangma6176]

That's look so classic saddle stay... fantastic sir. but in India we have so so poor quality that's why I have been so hesitating to go it

[@julianroberts7116]

I'm considering getting some of these, so thanks for posting the video. They look really nicely made and good quality, but the 'double D' method for closing the flaps looks like a right pain in the arse. You're ages fiddling around there just to fasten it. Just think if there were simple catches instead. Click click, and the flap is open - pop pop and it's closed. No farting around with cold, wet or tired fingers trying to feed the strap through the D rings. There are more 'double D's holding the pannier onto the frame, so every time you park somewhere insecure for any time you're going to have to faff to get them off. Just for other people considering a purchase... Other panniers I'm considering are the Trip Machine ones, and also the horribly named 'Cotswold Hipster'. They look just as vintage, are leather or waxed canvas, and attach/detach far easier.

[@thebingleywheeler]

They are meant to have a period look hence the D rings…..important for authenticity in my view….and it’s only a few seconds more effort I have no problem with that 👍🏻

[@adilsontorres4392]

Parabéns.... ficou ótimo... aqui no Brasil não tem para vender....somente importados 😊😊😊

[@davericketts9101]

Great video thanks, nice clear video and thorough instructions. Expensive items but you pay for quality and I have seen reviews on the Indian ones and you might as well tie on a couple of supermarket plastic bags to the bike.

[@thebingleywheeler]

Thank you much appreciated yes not cheap but excellent quality in all respects 👍🏻

[@VALE260580]

I have watched the video several times and I think they are the same Saddlebag Frames (1990670) for the Classic 350 and 500 UCE. It only increases the lower Antero attachment of support...... Regards

[@KevinBird-vx6dy]

Great video. Any chance of some feedback, photo or a video on the comfort level (leg comfort in particular) of a passenger once the panniers are fitted?

[@thebingleywheeler]

Sorry I don’t carry a pillion

[@Anirudhsinhjijadeja]

Good job sir

[@thebingleywheeler]

Thank you 😊👍🏻

[@ccooper8785]

Good looking and practical addition. RE needs to make some fibreglass classic looking Craven type panniers for those of us who prefer hard luggage.

[@thebingleywheeler]

Yes that would look good….they do make a hard pannier though

[@TimothyCannock]

Thanks for this video. I am just about to order a pannier kit for my Classic 350 (same colour as yours). As I have already removed the pillion seat and its subframe it may be easier for me to fit that top nut and bolt.

[@thebingleywheeler]

They’re great bags just the right style 😎👍🏻

[@stevenmiller184]

I have these bags on my 500, they are extremely sturdy and capacious. I especially like that the frame supports the bottom of the bag in case you are carrying something heavy. The only downside is how fussy they are to open and close. The straps are very stiff.

[@TAYM]

Marvellous 😊 now I have no excuses not to get mine fitted to my 500 😊 thanks BW

[@thebingleywheeler]

You are always welcome buddy 👍🏻

[@dinomalta712]

Nice one Bingley, Luvly job, and does't make the bike look 3 feet wider, ala Himalayan jobbies! Cheers DINO.

[@thebingleywheeler]

Thank you Dino yes much better fit than scram 👍🏻

[@VALE260580]

hello from MEXICO, excellent video... I like the Mounting Frames or Frames for Saddlebags a lot since the ironwork on the bases with cords makes it look elegant... but I have a question, your motorcycle is a NEW CLASSIC 350 REBORN. I had the idea that these Mounting Frames or Frames for Saddlebags were for older models.... but please help me with my question since your answer depends a lot on my purchase, knowing the model or type of motorcycle and knowing if those Mounting Frames or Frames for Saddlebags are good for the NEW Classic 350 Reborn ... thanks and regards

[@thebingleywheeler]

Hi great to hear from Mexico…..yes my bike is a new Classic 350 Reborn (2022 model). The frames are designed for the new bike and are made my Royal Enfield as are the panniers. It’s a great bike 👍🏻

[@jamonvatmno4812]

I mean the Pannien Bags Mounting Rail

[@scottboettcher]

Great vid! Thank you... One question: when you attach the rails for the bags, can someone sit on the pillion OK? In other words, with the brackets in place, but no bags on...asking for the wife 😆 Ride Safe 🙏🏼

[@thebingleywheeler]

Yes no problem the frames sit back from the pillions natural leg position 👍🏻

[@julienpithois6391]

Hello, thanks for the video. Pity though we didn't get a good view of the final result. I own the same bike and am considering buying a set of these side frame from Hitchcock, but a detail just caught my attention. Are these frames for panniers leaning forward. On some videos and their website, I just got the impression the luggages are not really horizontal?

[@thebingleywheeler]

Hi no these pannier frames are horizontal….perfectly in line with the bike….they are by RE and very good quality from Hitchcocks. More videos to come on this bike and the upgrades 😊👍🏻

[@julienpithois6391]

@@thebingleywheeler thank you for your response

[@alkipfer3889]

Good instructtions, thank you. But: did you REMOVE the top shock absorber bolt or did you just loosen it in order to get that panniers frame on? What happens if you remove that shock absorber bolt completely, will the bike collaps? Also, you did not put back the two side handles (the ones to lift the bike on its central main stand), why? Thank you.

[@thebingleywheeler]

The top shock bolt has to be REMOVED to fit the frames and provided you do one side at a time there is no collapse of the suspension. I left the handles off as the pannier frames work well as a grab point for centre standing the bikes😘

[@alkipfer3889]

@@thebingleywheeler Brilliant, thanks so much!🤩

[@VALE260580]

Hello again I have searched a bit and the model you bought was: 1750109 # of kit 1990670?. Stop your 350 2022?. I would really appreciate it if you help me with these data or mention the model you requested. Thank you

[@thebingleywheeler]

Hi here are the links Frames: accessories.hitchcocksmotorcycles.com/47167?cont_page=Royal-Enfield-350-Classic-Accessories&year=2022 Bags accessories.hitchcocksmotorcycles.com/40520?cont_page=Royal-Enfield-350-Classic-Accessories&year=2022

[@derekcostello1016]

The frame for these bags are no longer available from Hitchcocks.

[@niallwildwoode7373]

Yeah. I've found that too. Bloody annoyed about it!

[@gruffrossi5420]

i ride 66 bullet in a 2202 bullett arrmy frame i paid 20quis fer a paiir of arrmy panniers if i put stuff thats new on me old bullet it jus look odd

[@rameshgurung4426]

Hi Mate is this possible to get in Nepal.

[@thebingleywheeler]

Yes order from www.Hitchcocksmotorcycles.com

[@jamonvatmno4812]

Hello dear , How are you? Can you please give me some information about the items company where we can find out and buying the items like this or do you have any ling of items or the company name to order because in eBay I trying many shop but items it’s not fit krab Thank you so much .

[@thebingleywheeler]

Www.Hitchcocksmotorcycles.com

[@pamelablake7647]

Its MrT what actually is the inner dimensions of the pannier bags in cm if u can thank you

[@thebingleywheeler]

45x30x15 😎

[@jonathan461965]

Unfortunately Hitchcocks no longer stock these pannier brackets and don't know when they will be having any available soon. So annoying!! 🤔😠

[@juergensokolski4714]

Does one really need the extension brackets? Looks somehow that the frame would fit even without!

[@thebingleywheeler]

You need them 👍🏻

[@juergensokolski4714]

@@thebingleywheeler 👍

[@james-le2rs]

How much did they cost please...$ Thx james