Ruger Wrangler/Heritage Rough Rider Space Cowboy Kits

Taking a card from NguyenKvvn's awesome Heritage Rough Rider body kit, I've remixed a more streamlined, less bulky version that doesn't add a ton of functionality but gives you a very unique look. I've also designed a version for the Ruger Wrangler, a fantastic .22LR revolver.

[@dadedafro__8706]

This man gonna have his own movie props company dedicated to cyberpunk aesthetic weapons. I would work for him.

[@booliganshootingsports]

I've actually done some Hollywood movie prop design and fabrication with a soft cyberpunk aesthetic. One day I'll get hired as an armorer too.

[@dadedafro__8706]

@@booliganshootingsports FREAKING CALLED IT LMAO these aggressive boxy designs especially for pistols are my favorite types of guns, good luck to you man keep this up !

[@tonyrome655]

What movies were your designs in?

[@booliganshootingsports]

@@tonyrome655 Gotta wait for them to come out, I'm under an NDA.

[@melonzvillegonzalez9647]

@@booliganshootingsports Hey man I NEED one of these I own a bronze tiger wrangler .22 and I decided to start looking for something to make it look a little better and you made exactly what I had on my mind where do I reach out to you to buy one from you I have a couple of questions on possibly having something made for a Walther q5 match m1

[@timothyleach5082]

These remind me of hand cannons from Destiny, revolvers with blocky barrel shrouds. Absolutely beautiful

[@GRUNTxZERO]

I would buy a revolver just for an ace of spades version!

[@ValThracian]

Look up police practical combat (ppc) revolvers. Have the same blocky barrel

[@tjmueller2592]

I'm not a laser fan, but I feel the aesthetic deserves lasers...

[@andrewkircher7136]

Fun fact, according to the user manual for the Ruger wrangler you can dry fire it as much as you would like without damage occurring to the pistol.

[@JC-gs3br]

My wranglers are ready to join my heritage in the space age!

[@jayranger9605]

This thing looks ABSOLUTELY ridiculous! I Love it 😍

[@thespider7898]

Very cool, I'm definitely planning on printing a few of these when I get the chance.

[@truemetaljesus]

Anything close to the trigun revolver is an absolute win 👌

[@FargoFX]

Awesome work. Love the aesthetics.

[@krazy187k]

New to the channel and already love a lot of your work that short barreled shotty too clean

[@jeremiahcherry5283]

Gah, I want one of these body kit so bad!! My heritage RR would look awesome with one of these. Sure wish someone sold a kit, even if there was trimming/fitting needed.

[@kkkevv224]

these are beautiful

[@narref04]

I love the aesthetic change to the ruger. I want to print one of these, but now I need to find a new holster that works with this design.

[@jpdaddy678]

Pretty cool idea! I'd love to add a Lazer or a red dot to my Wrangler

[@christianrodriguez629]

Yo this looks dope!! I’d definitely buy one!!

[@apitho]

Looks sick so far

[@OrangeApeOutdoors]

I would love one of these printed in purple with a holster for it, this is incredible

[@grantdixson1442]

Wow. I didn't realoze somone was doing stuff like this. pretty cool.

[@izaya_253]

This is sick af and i want one

[@DisHammerhand]

When I saw the thumbnail I had to look. What a fun idea.

[@billsummy2412]

WOW ,,,,, SUPER DUPER ! :) Now that`s something I would buy !

[@lukeman9851]

I'd love to see a blade runner kit either for these or a chiappa rhino, especially with a transparent orange grip.

[@vegtamthewanderer1516]

I challenge you to try this with a .357 magnum, as it is a higher power cartrige i think it would be an interesting design challenge to adapt it to a stronger cartrige, like in a ruger blackhawk

[@magnum0818]

Most definitely. It'd be awesome to have this with the sleek look and a full power cartridge.

[@alexanderm3504]

Hollywood needs you for scientific guns bro, love the work

[@eddiemoons2906]

I need that kit for my wrangler like yesterday haha, so dope

[@booliganshootingsports]

I released the files yesterday on my subscription website!

[@eddiemoons2906]

@@booliganshootingsports awesome, now I gotta find someone with a 3D printer🙂

[@jrod291]

wow - awesome!

[@tonelar415]

what a great job… if they redo the Firefly show you’d be in the groove

[@mikehouse2820]

Just installed on my heritage rough rider and I have to say, you turned one of my least favorite guns into one of my new favorites. Thank you sir.

[@fuckcommunism4222]

Are these for sale anywhere?

[@bruiselee28]

Where did you get it? My heritage 4.75 is lookin for this

[@mikehouse2820]

@@bruiselee28 I printed it

[@bruiselee28]

@@mikehouse2820 are you interested in selling them kind sir? :) does it fit a 4.75 heritage?

[@blackmount1]

I've been planning on getting one of these rough riders. Would you ever make one for the 16" barrel version? Would make a awesome revolver rifle. They make stocks for them. Pretty sweet. Let Me know I'd totally buy one

[@jaredmartin3780]

If you can make a "Space kit" for the 16" I'd definitely buy it

[@Mr-kg5ij]

I agree

[@justjayjustjay5054]

Oh man... need one of these for the Taurus Public Defender short barrel... with a rail on top

[@bryanl8951]

Aaaaand I found them lol 😂 Awesome builds man. Keep it up P.S. Please make a Last Word or Ace of Spades ♠️ next haha

[@solarflare1008]

Great guns

[@kennethharriger6152]

The shroud on the revolvers make them able to be tucked inside your pants like carrying a 1911.

[@googlekonto2851]

I searched for columbine documentary and suddenly all these shool preparations channels like yours are on my feed.

[@velvet.7174]

I like the barrel

[@KyleBrinkerhoff]

would be fun to do a integrated optic hood, using a cheapo amazon red dot in it, also a holster system would be cool for like a drop leg safariland

[@booliganshootingsports]

It's something I'm thinking about for a later version. A low mounted RMR/Doctor style sight built into it could look sweet.

[@andrewpatti3728]

@@booliganshootingsports A .22LR single-action revolver with a shrouded cylinder gap, optics and rail capability, and an integrated or detachable suppressor would be a genuine technical step forward, adding functionality beyond the purely aesthetic (and aesthetics are cool too, don't get me wrong). Big problem with anything in the "hush puppy" genre of special purpose firearms is brass retention. Revolvers solve that, but don't suppress well due to cylinder gap. Expansions on this concept could do both. That said, the aesthetic work you've done here is quite good. Kudos!

[@booliganshootingsports]

@@andrewpatti3728 A clamshell design like the Peters PSDR would be pretty sweet, that's for sure.

[@GunFunZS]

Why not neodymium inserts to make it stick into a minimalist holster that just covers the trigger guard?

[@andrewpatti3728]

@@GunFunZS Maybe something that would mate to a QLS fork, cover the trigger, and magnetically mate to a magnet embedded in the chassis at the 6 o'clock position under the barrel? Less a holster, more a 'gun hanger', fastest possible draw for fighting replicants and can mount a suppressor.

[@SpeckldspottyfuturE]

Tis is awesome! please make one for the DB Sidekick!

[@ricomon64]

You do some awesome work. This one reminds me of a custom Rough Rider I built - Rick Deckard's blaster from Blade Runner. It's also a 3D printed shroud the Rough Rider just slides into. ...plus the new grip and trigger guard. It really looks the part aside from the opaque grips. I really need to make a mold to cast some proper transparent amber grips, although I do also have a resin printer.

[@booliganshootingsports]

Sounds awesome, you should share those files if you haven’t already! I’d love to build one.

[@ricomon64]

@@booliganshootingsports I'm not really sure how to get them to you. I've designed it in Fusion 360, and I can output ASCII or Binary STL formats, but I don't know where to send them. I just opened F360 to modify the grips and make the base of the grip a separate piece. Do you want the files the way they are, or should I redo the grip first?

[@booliganshootingsports]

Shoot me an email, [e-mail]. In F360, export the STL or the Step file, I’d love to tinker with it! Thank you!

[@tonyrome655]

Looking forward to seeing what you come up with when you finish tinkering.

[@ricomon64]

@@tonyrome655 Booligan has posted a video with his prototype print. I've been trying to make some revisions, but life keeps getting in the way.

[@CipherJin]

Imagine something like this applied to a top-break revolver. HR 999 ppc edition!

[@jlshine4227]

I'd love one for my Wrangler

[@danlawson1788]

You should definitely make one for the 1858 Remington new army along with some oversized finger grooved handgrips

[@FlyfishermanMike]

I have some space gray filament that will rock on my silver wrangler!

[@countzero5150]

This is then first time I've ever wished I had a 3d printer.

[@josephbrown2583]

Hell yeah

[@szeglowskip2]

Ok this is sick. Just picked up a 4 3/4 rough rider. Now I gotta find someone with a printer lol.

[@QuietGuitaristfan]

Almost makes me think of Vash The Stampede.

[@youcancallmemaster2680]

This is so fucking cool looking.

[@stygiatech8352]

Sick

[@pbmc202]

Now that you have designed those you need to design a holster for them to fit in, you could continue with the space age look on the holster

[@randallbatson611]

I'm late to this but you have talent

[@paultrimble9390]

Nice 👍🏻.

[@raccoonmash5705]

I would love to see one for a .44 would buy for sure

[@Adronacfass]

Do you have a kit for the 6.5 inch rough rider? And do you sell them? I don't have a 3d printer but would love one for my rough rider!

[@ATable4You]

Alright 3. . . 2. . . 1, let's go!

[@austintapia5704]

That Kp-15 lookin 100

[@graysonsnyder5048]

Id really like to see one of you 3d printer wizards come up with something that looks like a Swedish k.

[@Fenrirwandering231]

I need one for a black powder pistol... Futuristic 1860! Haha

[@JDMsohc]

An assembly tutorial would be dope bro!

[@booliganshootingsports]

It’s pretty simple. Unscrew the screw holding on the ejection housing. Remove the housing and take the spring and ejector out and place it inside the printed kit. Slide kit over the revolver until hole aligns with the screw hole from the ejection housing. Reinstall screw and you’re done!

[@x.adam1]

Could you make something for the Rough Rider to make it look like a Korth revolver? It has the picatinny railed front.

[@oakland002]

Judge dredge cool gun 😎

[@supersonicelectro420yo]

Hey can this gun be used as a melee striking weapon at the same time?? My thinking was it's thicker barrel with weight helps with shooting and striking onto close opponent.

[@coloradoroninnomad1336]

Hey man I'm just saying... Something in a printable mando or boba inspired pistol.. maybe a car bane version for those 22... Or Cob Vanths .. that would be an amazing one too!!! Love this want one

[@Raddog2020]

Free product idea ; somebody should design a plug for the rough rider where if you take off the safety you can hide that empty space. There's a lot of the pistols out there and a lot of people don't like the safety but don't want their gun to look broken either.

[@terrytwobears4969]

i have a heritage rough rider you should make them for hatfield 20 gange that would be cool cause you made cool look and i like your weapons in the back ground

[@booliganshootingsports]

I have kits for Hatfield shotguns.

[@joshuaabbott7498]

I want to see you set one up with an RMR

[@bigrizzle9760]

Hey man, you think one might fit on a Tanfoglio Gardone TA-22? It's a single action revolver, very similar to these. Of the two, it most closely resembles the Ruger. I'm sure you've heard of the brand, but it's a bit uncommon so my odds are slim. Here's to hoping!

[@seanphilipps5343]

Firefly vibes

[@elluchador1251]

just a question, would a Ruger Single Six Model be in the works? how about the Grips, are the Heritage model interchangeable with the Ruger Single Six? Thanks for your creativity.

[@jasonstewart3748]

There are 2 ways to suppress a revolver. Hes close to finding the other way that nagant didn't use.

[@willkroll8094]

What CAD program would you use for this? And what printer/plastic?

[@Enigma-Sapiens]

Cool! Will you have the Rough Rider kit for 10" barrels?

[@Starpotion]

See you space cowboy

[@sumone1930]

You my guy

[@joedouche3818]

That is so cool! Can we buy it? If so what is the website? I tried ordering but website didn't let me.

[@kvncnh]

What filament was used for this? I just bought a rough rider 22lr

[@alexarmata9811]

You should do one for Vashs revolver in Trigun

[@B0BACAKES]

I want this.. take my money

[@richardmundo9709]

My wrangler transfer bar doesn't rattle I did notice it has a spring,not sure why some do others don't

[@bongscholar3255]

My RR is 6” long and has left hand ejection, will you be making a kit for this too?

[@AreanApple]

Anyone have a problem with the front site blade being too tall? I know my rough rider is older but I am not sure when they changed the site height.

[@ernesthunter7575]

Okay that's it dude. I want one. I was already looking online to see how much the heritage roughriders cost. Chiapa makes one that's 10 rounds if the specs and the dimensions are still the same I want one. I just need to know details about how to get the firearm to you. I just want one straight up I'm not even joking. I want one. I think you're on to something.

[@michaelmccormick3077]

how about incorporating a spare ammo storage compartment...say additional 6 rounds?

[@tysonolsen4862]

How long you think before heritage copies this too?

[@heldhostageplshelp]

How did you get the rough rider to have the ejector tab protruding out from the barrel instead of under the barrel is it an different model or something

[@booliganshootingsports]

The ejector is in the same spot as usual. The channel for it is part of the printed “body kit”.

[@TheDracfink]

any clue if or when a 6 inch heritage will come out? way cool btw

[@ThreeProphets]

Now you just need hexagonal cylinders

[@rynoturtle]

Hey just came across this video, looks bad-ass. Have anything like that for a judge revolver?

[@theshocker4626]

See you space cowboy....

[@brutalbag225]

Id like one for a 3.5" barrel

[@Northstar3595]

Looks like Ironwoods pistols,Ebony and Ivory,from RWBY

[@TheGrimCreeper95]

It needs a rail and the bottom for lights and lasers

[@Raven-gz7pm]

Are these purchasable? Id love to get one.

[@feezy_bro]

So I found a file with this design, I printed and it came out great. Problem is that it didnt fit my RR. The ejection system is on the right of the print, while located on the left of the firearm. Even when you show the model, your RR has the ejection system on the right 🤯🤯

[@booliganshootingsports]

I have never in my life seen a left eject rough rider lol. Ever.

[@Rc-Adventurers]

Soooo cool. Can u make a “slick”file for the new Ruger Wrangler 3.75” that has the Birdshead grip? Please!!!!

[@booliganshootingsports]

The tricky part is that there’s no threaded ejection tube mounting hole to secure the kit to.

[@DirtyHairy84]

Looks like the wingman in Apex Legend

[@MonsterMike816]

How can I purchase this? All I can find is a download, is that the only way or can I purchase one made then shipped to me?

[@booliganshootingsports]

All I offer are the free downloads so you can print it yourself. I don’t do any actual item sales.

[@madmaxx2164]

I would love for you to make one for my barkeep. Please let me know how to place an order?

[@grantguice1741]

Will this work on the heritage rough rider 6.5 in barrel with adjustable sights?

[@booliganshootingsports]

I’ve got a separate version for the long barrels, but I haven’t tested it with the adjustable sighted models

[@Hurtyourfeelingsagain]

hello, what home 3D printer do you recommend starting with that is capable of printing these? Thanks.

[@booliganshootingsports]

I use an Ender 3 V2 most of the time

[@thatoneintrovert9618]

Can you make an assembly instruction video? And also what are some good holsters for the gun after the mount?

[@booliganshootingsports]

Assembly is a breeze. Unscrew and remove the tube for the ejector. Put the ejector in the kit, slide on the barrel, reattach the screw. Easy peasy!

[@thatoneintrovert9618]

@@booliganshootingsports I managed to get it on and did exactly what you said with putting the ejector on the kit, the barrel and the screw but man, that thing was a pain to get on! I had to use a wood block and hammer to get it on because it was really stuck on there tight! I lined it all up too. I may have to do the same to get it off again, as I have tried to get it off once but it's not easy.

[@booliganshootingsports]

@@thatoneintrovert9618 if it was that tight to get on, your print may have been slightly out of spec. It should be snug but not overly tight.

[@thatoneintrovert9618]

@@booliganshootingsports I got it printed by a different company, as I don't currently have a printer myself. So that may explain it. Either way I managed to get it on. Thanks for making this.

[@booliganshootingsports]

@@thatoneintrovert9618 Glad you got it on at least!