Rusty Deadlocked Arbor Press Restoration - Restoration Videos

#restoration #restorationvideos #antiquerestoration
Rusty Deadlocked Arbor Press Restoration - Restoration Videos.
I restored rusty deadlock arbor press in the video. "Made in USA" I acquired this rusty deadlocked arbor press from a junkyard nearby ship-breaking facility, I paid around 20 bucks for it. It was the part that i have been looking for a while. I fell in love with it in first sight. I am very glad for getting a chance to restore it. Hopefully you will be glad with my restoration as well. Btw I really wonder what you might be thinking about the new handle, please comment below your opinions. Don't forget subscribe to my channel and like these videos please. Thank you for watching.
Meine Mechaniker.

[@meinemechaniker]

Thank you for watching. Don't forget to ''Subscribe'' This is my previous video; 1950's Oil Lamp Restoration - Perfect Restoration [4K] kzbin.info/www/bejne/aXqrXp5ujJV2rsk

[@mertmoon7825]

Are you Turkish or are you living in Turkey

[@meinemechaniker]

I am a world citizen 🌎🌍😉

[@user-uy7vi4ix1v]

Like👍🏼

[@meinemechaniker]

Thanks

[@MrSneakyGunz]

@@meinemechaniker Crafty to play to the U.S. Like you do.

[@philipwalton4877]

I’m convinced that this guy and My Mechanics are the same person

[@meinemechaniker]

😅 I take this as a compliment. thank you.

[@cesarjoughin4959]

This is the first video of seen of him, but just from this comment he's getting an instant subscribe

[@jimmyfleebot]

It it was the same person, it would be a smart move financially. Most of his subscribers would be subscribed to both channels since they're so similar, essentially turning one subscriber into two.

[@meinemechaniker]

@@jimmyfleebot I'm not the same person, you can believe that.

[@jimmyfleebot]

@@meinemechaniker Your hands do look a little different... but I'm a suspicious man ha ha. Fantastic channel by the way, love your work. Thanks for making this great content for us to watch.

[@somebody-uj9bl]

Great Project But major mistake at the end. If you are pressing a bearing into a hole, just musst press on the outer ring, otherwise you could destroy or damage the bearing.

[@caseyjones166]

What bearing?

[@puirYorick]

I applaud the "new handle" for this press. If using that longer handle then you really need a different tool tbh. Speaking of needing a different tool ...that bearing in the test needed full diameter support to reach the outer race for pressing. 💡

[@In.New.York.I.Milly.Rock.]

That is one chunky press! It might have cost only 20 bucks, but with all that work, its beauty is now invaluable. Cheers!

[@tombradscott]

The fact that your shop is so quiet you can hear the bolts breaking loose is a luxury i will never know.

[@meinemechaniker]

😅👍

[@aoiph]

Thomas there is literally a white noise or some sort of water running the entire video... are you deaf?

[@charlesseymour1482]

Gotta get a quiet place. Great content.

[@chrisb8783]

I love how silent the video is. So peaceful and calming!

[@MrGovmentCheez]

I worked in Grand Haven Michigan and I live in the next town over. It's a great City and Resort town. Great place to visit if you are not from Michigan.

[@ZantZ]

I swear the most satisfying thing in the world is hearing that bolt pop.

[@johnwilliams1223]

Better than the original

[@almanzoli1736]

Better than new !

[@kevinmeyer5336]

I live 20 miles from Grand Haven MI where this arbor press was made. Beautiful restoration! I'm sure it looks 10x better now than the day it left the factory.

[@ThatDamnFosterKid]

Fellow Michigander here. I was excited to see the Grand Haven Mich mark, too!

[@vickyahmad3539]

@@ThatDamnFosterKid ooklo

[@kajem575]

Home of the singing sand on LAKE MICHIGAN and the now defunct WESTBANK bar where my band 24k played in the mid 80's. We slept on the beach or in our 40' school bus in the state park. Our booking agent's name was Kevin Meyers who is now a professional concert promoter. I remember seeing large DAKE presses on the COAST GUARD docks nearby. Didn't know they were manufactured there. 🙂✌️❤

[@robbie7741]

Sonunda bir türk restorasyon kanalı bulmak çok iyi oldu.

[@meinemechaniker]

👍

[@iispjhanna]

If I had THAT one it would go in my show case and my cheap HF would stay on my work bench. Very nice, thanks for sharing.

[@MikiStrange]

I had a thought while watching you paint the raised letters. Maybe you could try covering the letters with Plasticine or Blu Tack and then using a small roller to roll the plasticine until the letters show through. This would perfectly mask the letter edges and when the paint is dry just peel it away to show perfectly painted letters. It's got to be easier and neater than freehand painting. All the best and thanks for the videos.

[@meinemechaniker]

thanks for the idea.

[@GrommiD]

Had the same idea with a slight difference in details.

[@user-FrankCastle]

You should get a hobby powder coating set and powder coat some of your projects. It will be way more durable than paint. Just an idea. Great job.

[@georgeshelton6281]

There was more than one arbor press that was restored. Countless number of them were. The only thing that's different is the product's brand name. 💯

[@africanelectron751]

Pain stripper, rust remover than sand blast?... I love the way you debur the castings, really classy.

[@robertclines7519]

Very nice restoration, thanks

[@lavluvlov]

Great photography !

[@billyfoster3223]

Great work again!😁⚒️🛠️

[@josephalexander3884]

I am particularly impressed bye your attention to small details. Highlighting the lettering, adding the contrasting paint to the polished faceplate, and adding the flag decal to the faceplate. Exquisite work. Thank you for the time and effort you invest in your projects, and sharing them with us.

[@Bruno-eq7rd]

You are the best. Far away from the others.

[@avago2day]

Absolutely outstanding, it was like watching magic happen before my very eyes. There must have been a tremendous amount of work that we didn't see.

[@meinemechaniker]

thank you, you are right. Sanding scenes you watched for 4 seconds may have lasted 1 day.

[@rbyaldrzee6657]

Beatiful 👍

[@marcosufarte1017]

Good restoration.

[@martyb3783]

This is a man who does not like sharp edges, burrs or casting flashing. Well done.)

[@ElTelBaby]

@ 17:37 U could do with centring the tool in the holder;... that would save some sanding... Leave U more time on doing such a GR8 job... 👍

[@nuassul]

19:10 Meine Mechaniker: 👍 Me: AWESOME JOB 👍👍👍👍

[@meinemechaniker]

🤗👍

[@grumpfcatarso2453]

Better than new👍

[@meinemechaniker]

👍

[@randyclyde4939]

Catching up on some older videos, this was IMPRESSIVE! The attention to detail and the care you showed while working on this piece was wonderful! The results were fantastic! Be well, be safe!

[@meinemechaniker]

Thanks 🙏🏻♥️

[@neraklrllessur8844]

New handle is much better!

[@meinemechaniker]

Thanks

[@ecleveland1]

I like the new handle much better than the original.

[@MovieCharactersTop]

again a great project, I am watching your work with admiration :) @MyRestorations

[@meinemechaniker]

👍

[@ahmadaliisah8597]

This guy is the next "My Mechanics", he is really good. I enjoy all his videos

[@meinemechaniker]

Thank you ALİ 🤗

[@nandi123]

You can put clay over the raised lettering, sand it flat to expose metal, paint it , and remove clay to achieve perfectly painted debossed letters.

[@terrystover7365]

I've used one of those many times in different factories over the years. You made that piece a thing of beauty.

[@taytase]

Your painstaking attention to detail is truly amazing. I literally always enjoy the end results. Thanks!

[@nagato8152]

Cute arbor press

[@davidfrank2824]

That really turned out fantastic. I cannot believe you were able to get it working again without any major parts. The way it used to work you could have got it done without no parts but the way you went was really worth the time and expense. That is actually something you could keep in your home. I know around holidays people put peanuts out this would make a good nutcracker. I just don't know with how good it looks that I would want to use it in the garage. If anything I would keep it on my workbench in the house. That one I don't get so involved is dirty crazy parts I normally do more electrical work in the house on my bench and gunsmithing. Cannot wait until your next project.

[@Voyager_AU]

Great job; I love your attention to detail. You take off the sharp edges, clean even "unimportant" parts/spots, and smooth everything down. I enjoy your work.

[@meinemechaniker]

Thank you 👍

[@leahcole8672]

Oh it's so weird seeing Michigan (my home state) tagged in this? Love it though, absolutely beautiful work 😍🖤

[@sampathgamage861]

Clean & Nice Work.. 👍..😍.! Rotay Gear Part's Need More Grease... For Long Life Tool..!

[@robertpearson8798]

Nice. A very common and useful mod for these is to mill or grind the bottom two teeth off of the ram to allow it to ratchet in the full up position. This allows you to position the handle better for leverage.

[@toniatalley1977]

Beautiful job

[@michaeld9731]

Fantastic work! It belongs in a museum now.

[@dingsbums1627]

Großartige Arbeit. Die Presse sieht aus wie neu.

[@meinemechaniker]

Danke 🙏🏻

[@dave3156]

Another beautiful restoration--better than new!! Excellent touch with the flag! Thanks for sharing another enjoyable episode!!

[@MadMathMike]

Beautiful restoration! Thanks for sharing!

[@user-wm4dz5fw9d]

I love to watch your videos, mainly because you are so very good at restoration. This was really impressive.

[@meinemechaniker]

Thanks

[@johncarter9067]

Great job

[@whodoneit218]

That thing looks pretty enough to date!!

[@anonymous-mj8wb]

thats absolutly incredible.

[@MauricioGoncalves.]

Nice!

[@abdelhamedmowafy4447]

Wonderful acting ❣️

[@neraklrllessur8844]

Beautiful! Everything to perfection! You always go the extra mile to ensure everything is top quality!

[@kristoffern.9106]

Very Nice restauration, the only part im not thrilled with is the crazy amount of scratches visible on the polished parts. In the future i would recommend using higher amount of grid on the sandpaper before polishing for better finish. Still, the video gets a thumbs up. 👍

[@meinemechaniker]

Nothing escapes his eyes. I surrendered and you are right.

[@chuckbickford120]

Nice 👍 job

[@kyriakos7179]

Art 👏

[@burakmutlu4636]

terrific 👍🏽👏🏼

[@CanadairCL44]

Restoration perfection! I always treat my tools as I would treat my best friend, so they will never let you down. How anybody could have let that arbor press get into such a bad state is a mystery to me! Excellent job, my friend!

[@meinemechaniker]

thanks, I think that tool has been forgotten

[@astralplainer]

You did it again! Perfect restoration.

[@raincheck5892]

The work you do is absolutely amazing

[@bigpete4227]

This is your best yet.

[@gokhanyazman517]

Mükemmellik detaylarda gizlidir.....ellerine sağlık....

[@THEWORKSSHOP]

Incredible results! Awesome work.

Love the care for detail!

[@chriscyrus2983]

Excellent job great marksmanship

[@mangajack]

Congratulations, you completely rooted that handle up by not tempering it again.

[@BONvivan8]

Очень крутая работа👏🏼👏🏼👏🏼 вы молодец, какое внимание к деталям👍🏼👍🏼👍🏼

[@jasoncdebussy]

Really lovely restoration. The modification to the handle was genius - it looks great. Awesome work 👍

[@ahobimo732]

Meticulous work. Glorious results. 👍👍👍

[@ahujeffrey]

Gorgeous, creative, perfect restoration. This is why I subscribe to this channel. I truly anticipate each and every video that is uploaded. Thank you so much for your efforts.

[@BradyBegeman]

That’s pretty much the perfect press to restore right there. I bet it was still a little pricey despite its condition.

[@stefinatrix3426]

@@RAMB0DJOHN Sir, please step away from the crack pipe.

[@meinemechaniker]

👍

[@larrykelly2838]

Great restoration

[@meinemechaniker]

👍

[@Johnnyreborn]

So focused on small details ! Perfect restoration !

[@meinemechaniker]

Thanks

Very very good restoration. The handle you made was more original. Good luck brother. You are perfect.

[@meinemechaniker]

Thanks mate 🙏🏻

[@gino5028]

True work of art, well done.

[@koronakorona1588]

first class!!!

[@meinemechaniker]

thanks

[@ourdailybored8431]

I don't know how I got here but damn, that's a nice video. Amazing job

[@richmonk508]

Beautiful!!!

[@terryrogers1025]

Your attention to detail is commendable young man. The handle with the threaded on heads on each end plus installing the o ring dampeners under each head was an, as simple as it was, excellent upgrade, thanks for the video sir.

[@meinemechaniker]

🙏🏻

[@mateoboschify]

Very cool

[@ecalzo]

IMPRESSIVE job... WOW .. very well done ..

[@meinemechaniker]

Thanks

[@mahmudsaidych5731]

Отлично!!! Только почему бы сперва не почистить пескоструем. Сколько бы времени было сэкономлено. 👍👍👍

[@kaidzaack2520]

Very nice and a pleasure to watch...but from a workers perspective (i mean people having to work the press) a highly polished handle and base plate do not make sense - too slippery for greasy items to press or greasy hands to pull the lever...the iron cast structure is (was) there for a purpose...😉

[@moshebron2105]

Beautiful new handle. I would've Knurled it

[@tituspullo9210]

Knurled and nickel plated.

[@ArtisticEndeavors]

Excellent!

[@meinemechaniker]

thanks a lot

[@bahopp9872]

Great work. Thanks for posting. The new handle is perfect.

[@jasonturner1045]

awesome. I have a Dake Y press, practically new, that I got from work. They were going to throw it away.

[@razorboyXVII]

Fabulous restore!

[@schmidtythekidd]

Everyone's favorite: The Dake!!!

[@DonaTellaVers]

Я уверена, что эта штука была менее красивой, когда сошла с конвейера во время ее производства! Отличная работа!

[@meinemechaniker]

thanks

[@user-xb1xb1ms7w]

Good job !

[@meinemechaniker]

You're too fast 👍

[@MrSigmaSharp]

His great patience pays off

[@meinemechaniker]

Thank you so much 🤗

[@timbaumgart483]

Another great project and restoration. Thank you for sharing your talent and preserving these little pieces of history.

[@meinemechaniker]

🤗

[@BorisIoffe]

You forgot two paper shims under front plate, otherwise excellent job. I got me Dake #0 for $60 from ship maintenance facility in Baltimore, MD. Mine was in better shape. I even kept the original paint job. I ordered 2 sets of paper shims from Dake along with round table. Thier presses are first class.

[@gholliday3792]

All I can say is THANK YOU? 🇺🇸

[@meinemechaniker]

🤗

[@onesadtech]

Wonderful restoration! Job well done, and the filming and editing is perfect! 😊

[@byOldHand]

the magician is working again. great !!!!!

[@meinemechaniker]

thank you, it's your turn to wizard. I'm waiting for the anvil and its stand.

[@byOldHand]

@@meinemechanikercoming in a couple days 🙏🏻🙏🏻🗜️⚒️🌿🌿