How to C-Notch an LS Swapped Slammed C10 Frame! - 1962 Chevy C10 Stepside Ep. 2

[@bazilwreckerloughead]

So much attention to detail...& that's just the chassis, imagine the detail that's gonna go into the rest of the truck. Top notch crew you got there!

[@SalvagetoSavage]

Thank you!!

[@b_for_brett]

Awesome to hear the owner has decided on the whipple option, gonna make some steam and sound wicked doing it!

[@SalvagetoSavage]

We're just excited for all the extra noises! lol

[@e.s.bryant765]

I love the old truck builds. This is what I am interested in here at home. Thanks for the new video.

[@SalvagetoSavage]

Thanks for stopping by and watching!

[@joshherrman3201]

I sure dig this build. This is the first time I've seen this porter built stuff installed. Top notch stuff here.

[@SalvagetoSavage]

Thanks! There stuff is super easy considering the alternative of having to fabricate one from scratch!

[@AmfP_89]

Shaving the frame rails adds that Lil extra that we all love from S2S

[@SalvagetoSavage]

Gotta make them baby bottom smooth!

[@chrispy104k]

Great job lads. For what it is worth, I think you should decouple the gas tank from the chassis via rubber or neoprene blocks given that Aluminium and steel expand at different rates.

[@SalvagetoSavage]

Good tip! We'll see if we can make some modifications!

[@brians9072]

This is literally my favorite car channel. Editing is so spot on. BTW, haven't seen Tim in a bit. Everything ok. Hope all is well considering the hurricane.

[@SalvagetoSavage]

Thanks so much for the support! Tim decided to move on to another project. It's sad but luckily we have a team of great guys to continue on our work!

[@SomeBoredGuy69]

Love the little touches that set your shop apart from other shops. Like, plugging the unused holes on the frame.👍

[@SalvagetoSavage]

Thanks for noticing!!

[@richarcruz7843]

Great work fellas where’s Tim??????

[@michaelrolleri2085]

he moved on

[@tobycrystal]

4 link mount holes may have lined up if you installed them on the correct sides!

[@robertrusso877]

Was thinking the same thing! Lots of grinding ahead of them, lol.

[@alfredolujan6580]

I’m sure they tried them on the opposite sides lol. Plus go check the kit out on the porterbuilt site that’s how they’re installed.

[@The_McPorkchop]

They look backwards

[@normgraham6658]

Definitely put those mounts on the wrong side. I have that same Porterbuilt kit on my truck.

[@HogshooterHotrods]

Awesome build (as Usual) love the new parts and time you spend putting a great video together showing the progress! I did not realize the pre 64 frame on these trucks had an X member like a convertible would have.

[@SalvagetoSavage]

The porterbuilt kit helps bring the rigidity back from the crossmember we cut away at the beginning of the episode!

[@xxJBONDxx]

best channel on KZbin currently

[@SalvagetoSavage]

Thank you so much!!

[@bradkraus5217]

Great content! Love this build plus it made my otherwise crappy day (week really) a little better. As soon as I saw the video drop I put my phone on silent. I'll call my customers back as soon as the video is done!

[@SalvagetoSavage]

LOL! Thanks for watching and thanks for all the support!

[@nicolelongneckergallery]

Always great to see a new S2S drop. Thanks for the content and ... where is Tim?

[@SalvagetoSavage]

Thanks for the support! Tim moved on to another project unfortunately

[@Will_my65gmc]

+1 on the Porterbuilt products. I recommend them as well.

[@SalvagetoSavage]

This is our second time using their kit, and it's always come through for us!

[@Will_my65gmc]

@@SalvagetoSavage That's great. They really do make good stuff. As far as I know they're the innovators when it comes to a lot of products like the the front drop member, hood hinges etc and getting the C10s to lay frame. And in my experience, their customer service is great. Great job on the project as well as everything else I've watched y'all do. I've only been a subscriber since the Tesla swapped C10. But you guys do great work and put out great videos and entertainment.

[@tlrhector]

Watching you guys do this, i feel like I missed my calling. Wish I would be building trucks and cool stuff. Thanks for the video, keep them up.

[@SalvagetoSavage]

It's never to late to start!

[@bobbyg313]

I love this channel! The fab work on these builds is top notch

[@SalvagetoSavage]

Thanks a ton! We're stoked you like it!

[@dave5833]

I learn soooo much from watching your Channel Well Done Gentlemen

[@SalvagetoSavage]

Our pleasure!!

[@TomMelling228]

man, this is legit my favorite channel now. keep these builds up.

[@SalvagetoSavage]

Thanks so much! Will do!

[@hermyherm365]

Dudes this is such a cool channel it should have more subscribers !! I can’t wait for the next video

[@SalvagetoSavage]

We're just happy to have to awesome subscribers that we do! Thanks for all the support!

[@frankfurther3828]

Diggin the IH in the back

[@SalvagetoSavage]

We're getting it on the dyno next week so hopefully we'll be showing you this thing really ripping real soon!

[@grayheadedgamer]

Quickly becoming my favorite shop vids... thanks for the great content guys!!!

[@SalvagetoSavage]

Our pleasure! Thanks for watching!

[@GlassWerx]

Trucks coming together quick and lookn good guys. Can't wait for next episode

[@SalvagetoSavage]

Thanks man!

[@paulthompson8642]

Love this... hope u keep doing these

[@SalvagetoSavage]

There will definitely be more slammed Chevys in our future!

[@billybike57]

Love the direction your new build is going. I built a 1964 GMC steppy, took 1st place at the 94 Truckin Nats. Of all my builds I miss that the most. When are we going to see more Chevelle vids?

[@SalvagetoSavage]

We're just waiting to get the interior so we can take our next step!

[@UncleManuel]

That rear framework really is... ...wait for it... ...top notch! 😁😇🤟

[@SalvagetoSavage]

Best joke of the week! lol The best part about Wednesday is seeing your puns! lol

[@Axial_Andrew]

That's not a C-notch, that's the golden arches!!

[@billrutter5246]

WOW Badass Mikey Im going to swing by and take a quick look at this rig cool as hell

[@SalvagetoSavage]

She has even more character in person! lol

[@FordLoverJustHunting79]

That's a clean looking frame!! It's going to look so good!!

[@SalvagetoSavage]

Thank you!

[@troydority265]

If your ever in hobbs new mexico come to Mccormick and sons to see Jimmy. He's an old man that's works there and he still races an old el Camino that he built. Thanks guys I help him every Saturday and he's a very good person

[@SalvagetoSavage]

We'll make a note of that for the next time we're passing through!

[@andrewakyaz4217]

Great job you guys are talented.

[@SalvagetoSavage]

Thanks!

[@Muffinshaker]

Hope Hurricane Ian doesn’t hurt your content … stay safe. 👏👏👏👏

[@SalvagetoSavage]

Thank you! Most of us here are Florida natives. We can handle it!

[@TheTrooper777]

You guys are killing it. Great job👍

[@SalvagetoSavage]

Thank you so much!!

[@mrm4155]

Great job as always!

[@SalvagetoSavage]

Thanks !

[@thepinky9876]

Been 2 months since a chevelle update... would love to see how it's going soon.. Loving this build though so it helps

[@SalvagetoSavage]

We're getting all the pieces together! Y'all don't seam to like when we give you 8 minute episodes, so we're making sure we have a decent amount of work to knock out before we put another one out!

[@thepinky9876]

I appreciate that effort for a better video.. cheers, thanks for the reply

[@Phoenix88111]

Great work David 👌👏👏

[@SalvagetoSavage]

He's killing it on his first week since his trial run!

[@FordLoverJustHunting79]

For your next project, yall should totally do a 1979 Ford F-350 or F-150! It would be soooo sick! I have a 1979 F-350 Custom that was my grandpa's and me and my dad are going to start working on in a few months or so.

[@SalvagetoSavage]

We have a 73 F100 that we did on our channel back when we first re-launched our content that you should check out! Tag us in your progress pics on IG! We'd love to see what you guys put together!

[@FordLoverJustHunting79]

Cool, I definitely will!

[@FordLoverJustHunting79]

How do I go to IG and what is it??

[@FordLoverJustHunting79]

Nm. Sorry, my mind blanked lol. I don't have instagram, but is there any other way that I could update you on progress pics?

[@oldblueshhrchannel1847]

Awesome build, Mike!

[@SalvagetoSavage]

Thank you!

[@skylarembury3712]

Anyone know if Tim has his own Channel?

[@jaboigube3440]

Where is Tim?

[@13raden]

He left S2S about a month or so ago.

[@CraaaigV302]

Dam i was wondering the same thing

[@Posibrian]

Didn’t really feel like he fit in at all.

[@bigpipol]

what a shame he was really good on fabrication

[@1973GLH]

1st Donnie, Now Tim.... sad.

[@Dogg222]

That drop member was porter built? And It should fit 1960 as well? I called porter told them I saw there product on your channel,dude advised me to get a 63-66.

[@jasobom]

What back spacing did y’all end up going with on those wheels to get that clearance?

[@fishpony1211]

Damn! Very awesome setup. Are u going to be doing paint and body work too? I think u should give it ur patina specialty work lol would look even more bad ass

[@SalvagetoSavage]

The owner wanted to keep the body the original color/original patina. But we're going to be de-rusting the frame and coating it for longevity! Thanks for stopping back this week Fish! We love your support!

[@LifeInTheDM]

What are you guys building for sema 2022!?

[@SalvagetoSavage]

We're taking this year off from the SEMA stress. We brought two vehicles that we built in under a year for 2021. This next time we go, we want one project that we really put all of our attention in to

[@kirkhamilton-c7b]

The channel is great. I do wonder the cost of the Porterbuilt parts plus the labor vs a full chassis from a place like Acme Chassis. How many hours of labor would you save starting out with a full chassis ? How would the total cost compare between the two set ups ?

[@SalvagetoSavage]

Full chassis is a little more expensive, but definitely adds more value in my opinion. I know lead time of a chassis is long so sometimes a front and rear drop member are the quickest way to get a built done.

[@SalvagetoSavage]

Full chassis is a little more expensive, but definitely adds more value in my opinion. I know lead time of a chassis is long so sometimes a front and rear drop member are the quickest way to get a built done.

[@tony-ps4qw]

Do you think boxing in the frame would help with rigidity? great videos!

[@SalvagetoSavage]

Boxing the frame would definitely help in the long run!

[@ChrisTsakiries]

What are the part numbers for front kit and the rear kit? And are they built specifically for a '62?

[@richardharvey8939]

Great video again. 😊

[@SalvagetoSavage]

Thanks again for watching!!

[@launceherron]

Awesome

[@SalvagetoSavage]

Thanks!

[@rickyhernandez8735]

Good video like always but where is Tim

[@SalvagetoSavage]

He moved on to another project unfortunately

[@rickyhernandez8735]

@@SalvagetoSavage ooooh darn ok well I'm still going to keep watching your videos love videos

[@albegt98]

good job guys 💯👍💪

[@SalvagetoSavage]

thank you!

[@Siyadlams]

That chassis got beefed up nicely. Are you guys still going to clean up the surface rust on some of the areas in that chassis?

[@SalvagetoSavage]

Everything's going to get cleaned up before paint!

[@ESharp79]

Awesome build so far. Just curious, where's Tim? Haven't seen him in any videos lately. Is he still there?

[@nicolelongneckergallery]

Was curious about Tim, too.

[@michaelrolleri2085]

@@nicolelongneckergallery Tim no longer works here, he's moved on

[@ESharp79]

@@michaelrolleri2085 dang. Hate to hear that

[@Furree_68]

In the end, I was sure you were gonna film Mikey. "60 yo dirt" Just kidding! 😂

[@SalvagetoSavage]

Dave's new so he can't be pushing Mike's buttons THAT much yet lol

[@George-zq2sk]

incredible content wow!

[@SalvagetoSavage]

Thank you!!

[@genemounceSr]

Nice work boizzzz!! 👏 😎🤙

[@SalvagetoSavage]

Thank you 🙌

[@aaront4494]

You could say “uh phrasing” for most of this video 😂😂

[@SalvagetoSavage]

The amount of times Kyle has to edit out "that's what she said" from the videos is huge. If he left them all in the videos would be 45 minutes long lol

[@wkrick]

Could the aluminum tank being directly bolted to the steel frame cause an issue with galvanic corrosion?

[@SalvagetoSavage]

We've run the same set up on a few builds now and haven't had any issues!

[@enricodigenova8112]

Looking good guys 👌👌👍👍

[@SalvagetoSavage]

Thanks!

[@grandpaseed]

I would be concerned that when that 1k horse power busts loose that the frame flex would not play well with that solid mount alum. gas tank . Maybe some over sized holes with rubber bushings on top and bottom ? But what do I know it might be a tailor queen .

[@elijudkins2578]

500 horse btw

[@jonjon_az]

500+ hp. I'd box the frame some more. More weight but when that 500+ hp gets old and ya add more hp you'll want that reinforced chassis.

[@theprofessionaledge-revenu9183]

WOW

[@SalvagetoSavage]

Hope you like it!

[@tylerseabook9423]

What brand kit was this again I hope I can find one for my 64 Chevy

[@SalvagetoSavage]

Porterbuilt!

[@tylerseabook9423]

@@SalvagetoSavage thank you.

[@polisher1977]

These guys are fucking geniuses. I wish I had their knowledge

[@SalvagetoSavage]

Thank you so much man! We really appreciate that!

[@jorgetequia5069]

What wheel and size wheel and tire is that?

[@A88A88]

Longerrrrrrrrrrrrrrrrrrrrr Videos please

[@SalvagetoSavage]

We got a long one coming for you this Wednesday! Make sure to subscribe

[@polisher1977]

I have a 62 c10 short bed and the frames are not easy. I think the 60-62 were the only frames like this they are damn near impossible to find parts for

[@SalvagetoSavage]

That's why a lot of the time it's just easier to swap em out for a brand new chassis. It's really hard to weigh the headache of trying to source parts vs the heartache of spending all that dough on a new roller!

[@rtrottier14]

If that's not an Canadian built Overkill Customs fuel tank, you're missing out.

[@SalvagetoSavage]

Have them send us over one and we'll try it out!

[@The_McPorkchop]

4 link mounts are backwards

[@gerhardlehner8236]

Top! 👍

[@SalvagetoSavage]

Thanks!!

[@hallmarkpoolsinc.2849]

Who makes that notch kit for 62?

[@SalvagetoSavage]

Porterbuilt

[@THROTTLEPOWER]

👍👍👍👍👍👍

[@billi5920]

Thats alot brackets on an old ass frame would that be ok ?

[@michaelrolleri2085]

ohhh yes, everything were adding will only make it better

[@WilliesPerformance]

Why does it seem like those rear control arm brackets are on the wrong side???

[@michaelrolleri2085]

you mean the 4 link?

[@robertrusso877]

Because they are!

[@SalvagetoSavage]

Nope! Poterbuilt 4 link brackets for the 62 go on the outside of the frame

[@robertrusso877]

@@SalvagetoSavage yeah that’s correct but it looks like they need to be flipped around and swapped side to side. That’s why the holes didn’t line up.

[@dudet9662]

isn't all dirt 60 years old?

[@SalvagetoSavage]

In theory. But if we're getting philosophical, since matter can't be created or destroyed, aren't we all 60 years old? lol

[@DetroitMicroSound]

👍 But let me remind you about an electric (1970's) Chevette rally car...... 😉

[@adamdiaz8442]

Where’s Tim ?

[@hoagiesherlin7732]

Pretty pimp chassis kit

[@SalvagetoSavage]

Thank you!

[@hoagiesherlin7732]

@@SalvagetoSavage thank you for building and filming cool ass shit👍

[@peeraphon1998]

HE HE HEE ! HE HE HEE !

[@pedrofernando176]

✌👍

[@masterg8189]

💪👊👋

[@darrelleaf]

What happened to your other fabricator? I mean the new guy seem like he is a switched on mad scientist. just wondering

[@michaelrolleri2085]

Timmy moved on to somewhere else

[@CraaaigV302]

Wat happen to tim?

[@SalvagetoSavage]

He moved on to another project

[@ritchardposterior262]

what kills me, is how i failed a inspection for welding on my frame and "modifying it" basically rendering my truck illegal to drive on the road. meanwhile in merica its way more common sense. It sucks being canadian

[@SalvagetoSavage]

Come join the dark side!

[@IsmailNuzaifKokky]

.

[@nick3209]

That’s a step notch not a c notch.

[@krusher74]

I Cringe watching the guy with no sleaves use a cut of wheel on the grinder with the safty guard removed, A terrible saftey example!! He can do what he likes with his own life but dont teach others how to put there lives in danger.

[@SalvagetoSavage]

We're not a fabrication school. If you're smart enough to use the internet, you should be smart enough to make your own choices!

[@paulwhite7475]

Why go to all that trouble when all that you seem to care about is how low you can get it ? Just drop it onto the stops and be done with it . No one will care about how it rides . Its never going to be driven further than on and off the trailer

[@SalvagetoSavage]

The owner will probably put more miles on this thing once it's built than you do on your daily!