Samsung Dryer No Power Repair

[@nicksills1231]

Thanks so much for sharing. Same dryer, exactly the same problem here in the UK. Fixed with a toothbrush and a small spray of WD40. Very satisfying 🎉

[@Joe-kz2pq]

Hi I initially cleaning the touch panel from corrosion with alcohol worked for a month but later it begin stopping again and cleaning it again didn’t fix it. But was a great first step to getting it working! I then bought a new touch panel online for around $180 Australian dollars. Replacing it was so easy (basically it’s a sticker holding it in place with some plastic tabs, it’s now working perfectly 3 months on. Thank you for your help without you I would have thrown it out.

[@christianmaudal2062]

Thanks for the video. I had to change the display. It came loose like a good tape. No heating necessary.

[@petesky007]

Great video, we have the same model but it has started to "pause" at random points in a cycle, then seems to time out and switches off. I have heard that a clean may fix this but if you have heard/fixed this issue before then I'd be most grateful if you can point me to the solution.

[@mariuszczaplinski7742]

Perfect:) Just working for me mate :) Thank you :)

[@12thManCricket]

I have Samsung quick drive model ww90t986dsh/s1 No power. Fuse replaced Changed socket No burn smell or damage wires Touch panel cleaned as you shown in this video. Power showing on the power cord to the machine but nowhere else on the motor etc via electric power tester Machine is absolutely dead no power no lit up. Touch panel doesnt accepts reset by holding buttons Let me know if we can speak on the phone and Samsung warranty is just over

[@SIMO-wd2xy]

Hi there, Could you please help me out, i've even disassembled my whole dryer to get it cleaned. I have also done the same thing to the control board cleaning it with a electronicparts spray because it had the same condens issue but a bit less then yours. I've already ordered the mainboard and tried it as well it doesn't give any sign of life at all the only thing that lids up is the inside trumblelight like u showed. Should I have to order the control board instead?

[@ferdinandeguzman-ec7uk]

great thank for sharing

[@gabrieltirtau7095]

Great!

[@nicksills1231]

Thanks

[@askmrwashywashy]

Welcome, thank you so much

[@amrani797]

Merci marché