Thanks for watching! Please let me know what you liked best about this video! Don't forget to subscribe: kzbin.info/door/agvpSGayvwUO3YjRnHZAzA
@TheTrumpetDoc8 ай бұрын
I've had bad luck with epoxy repairs so I skipped the gluing. Once I removed the broken piece (the little chimney that receives the screw, the bit that Dan needed the needle-nose to grab) I used a screw that was about 1/4 inch longer than the original and screwed it all the way through (into the part still in the handle, the plate that the chimney was once a part of). Snug as a bug in under 5 minutes. BUT I appreciated this video because it gave me the courage to start snapping off that inner cover! Sometimes you can't tell if something snaps into place or is screwed into place until you hear the CRACK! ;^)
@dh48806 ай бұрын
Glad it helped!
@drewdettra18625 ай бұрын
anyone know if you can buy a replacement to the "chimney" peice and not buy the new handle as a whole
@edwardlinne21567 ай бұрын
I bought another handle on EBay for $8.00. My handle was totally FUBAR. Thanks awesome job.
@dh48806 ай бұрын
Glad it helped!
@michaelmaltese86786 ай бұрын
What's the part number? Or link.
@cjg80932 ай бұрын
I followed the instructions and was able to fix it. The prior owner had an issue with the handle and used superglue to put it back on. So first, the glue had to come off - which was much harder than putting the handle on. Thank you!
@dh48802 ай бұрын
Glad it helped!
@theEducatingEntrepreneur2 ай бұрын
Thanks!
@dh48802 ай бұрын
I am glad it helped! Thank you!
@soraydahollinger265711 ай бұрын
Thanks for sharing. Good explanation ❤
@dh488011 ай бұрын
You are so welcome
@doodoobrown0019 ай бұрын
Hey so how's the glue still holding up bud? I've got the same problem
@dh48809 ай бұрын
It’s not. Maybe I didn’t let it dry long enough. I ended up just replacing the handle with a new one.
@jeremywhite61148 ай бұрын
Same thing happened to mine. It’s only a year old. The plastic piece just shattered into a dozen pieces
@msamra096 ай бұрын
Hello, What is the name of that piece that mounts the handle on the door? I don't know the part name. Thank You!
@marshallscotts21 күн бұрын
Thank you sir. Much appreciated.
@dh488020 күн бұрын
You’re welcome! I’m glad it helped.
@JudgeEarl5 ай бұрын
Good job! Thank you, Sir.
@dh48804 ай бұрын
You bet!
@arisnavarro6 ай бұрын
Thanks for the video. I just wanted to let people know that this is the 2nd time I've had to repair my handle and we all should refrain from cooking on the front right burner of our stove if we have this Samsung over the stove microwave. Usually the steam or heat from below starts to cook the plastic piece on the handle which makes it brittle and or melt and eventually the handle breaks off. It's happened to me 2 times already.
@dh48806 ай бұрын
That is unfortunate, but thanks for the tip!
@tiajuanacamille22542 ай бұрын
You should use your exhaust when cooking on that side of the stove it helps
@JrjaroАй бұрын
Yeah, Samsung really needs to improve the quality of these mounting pieces.
@JrjaroАй бұрын
Hi there, I had the same issue, but the plastic support piece inside the handle was impossible to repair or glue back together. Do you happen to know the part number? Thank you
@dh4880Ай бұрын
It is part number DE94-02933A. Here is a link to what I bought on Amazon: amzn.to/3ZdvKqj
@JrjaroАй бұрын
@ awesome, many thanks!!
@Katakagara4 ай бұрын
Goddamn Samsung could have made this a lot easier ! They could have just let the screws be accessible. I’ve got a slightly different model and the top screw is exposed. But still need to remove the entire plastic panel. 🤬
@dh48804 ай бұрын
It seems they do not take into regards repairing when they design these products.