SAMSUNG UN70NU6900F NO VIDEO FLASHING SCREEN FIX WITH PAINTER'S TAPE PART 2

SAMSUNG UN70NU6900F NO VIDEO FLASHING SCREEN FIX WITH PAINTER'S TAPE, SYMPTOMS NO PICTURE, BLUE SCREEN, FLASHING SCREEN, UN70NU6900F FA01, YA02 REPAIR. FIX NO PICTURE ISSUE.

[@michaelhildreth7658]

I am a maintenance tech at an apartment complex and saw this TV sitting by the dumpster. Normally I buy parts to repair my finds but I stumbled across your video and it worked like a champ. Thanks for posting this!

[@albertfarias79]

Suertudo!!

[@DARNELLFRANCIS-re7fp]

Thanks for making these videos I have this exact model tv with the exact powering on and off problem on the same left side of screen. Wish me luck today I’m going follow your video and see if I can fix my tv

[@muathsunaidi6717]

Thank you for trying to bring more color to the picture. i guess we'll have to settle for now but if you come up with another solution that brings more color to the left side. please do let us know. you're the man

[@cartycartyamplifiersalesrepair]

Great video Sir very educational keep up the good work nuff respect 👍 🙏

[@dawngateley1222]

Thank you so much. We were thinking we would have to get rid of our big screen and you helped us save it. Thank you for your help and such clear instructions. We really appreciate your help!

[@GuiltyGearX104]

Question instead of the tape would just changing the ribbon cable or the board you connect it to would work?

[@juanfig74]

so the tape should cover from pin 17 to 28 ?

[@hamil1058]

Alexander Martin I am happy it worked for you and now you have full color

[@tw6199]

I watched your video several times. I have the exact model of the Samsung TV. After following your video. It worked for a while until I put the TV back up on the wall mount and now every once in a while it comes back on, but that’s only after I pull out the plug and put it in again. Any advice would be fantastic. Thank you and I appreciate your videos.

[@kentownsley2173]

My 70 in screen was blinking on and off. I watched the video and followed it and fixed the tv thanks 😅

[@ernestoalonso945]

Thank you sir, i have the same tv with the same issue, using your method i have picture and colors again...

[@pctechdr]

Thank you again!! I was able to get the tape to where it is only covering maybe 3 pins.. I was not very exact with it at the end.. the color is a little washed out on the 1 side but it is much better than throwing it in the trash!! Thank you again!!

[@g..._anthony27]

What 3 pins?

[@mariarodriguez-tk3zc]

hi thanks for your tip, i fix my same tv with your solution. thanks bro.

[@Ratherbemilling]

Mr. Johnson thank you so much for posting these videos. Helped me so much. Where are you located?

[@djjohnson9791]

Houston area

[@yurixmod4945]

Olá tenho uma un65au7700g sem imagem você pode me ajudar não achei a linha VGH tem outra linha subsistir

[@MrCapecodder]

how about vertical lines will tape work

[@MrESage]

Can I replace the mother board for this or is my only option the masking tape?

[@protech967]

Watching the video he said that the panel is the issue. So replacing the motherboard based off what he is saying wouldn't fix it. :/

[@ericwells8929]

Hey DJ, so what part is the problem? The ribbon or the board. Looking to get mine back to 100%.

[@FixCBitC]

Thx so much. I fixed my tv!!!!

[@justinlewis5973]

I have a Samsung UN65TU7000FXZA, should the kill signal be located around the same pin?

[@adeniyikayode5663]

Th1is is a good job my brother i am in Nigeria Legos

[@ashquinn9053]

Thank you for your help, I greatly appreciate it!!

[@daveh9672]

DJ, I got ahold of the same TV, went through your steps. The fix worked, except I can’t get the “reds” right, and it’s driving me nuts. Would replacing the the display panel boards on the bottom provide a permanent fix? I’d love to be able to use the TV, but when your favorite NFL team’s colors are Red, this just isn’t cutting it for me. Thanks for all the info you’ve shared.

[@robrepasi7975]

I have the same problem. Same TV and fixed the issue except for the color. Spent hours trying. Will have to settle i guess unless someone comes up with a fix.

[@tom_greenery]

Ok so Ive replaced the main board. I’ve put the tape over pins but all I got was the welcome set up talk and blue screen. Any suggestions

[@andrajo2983]

How do you know how many pins to cover and from where to where?

[@ChrisJames-Affillionaire]

What does it mean if you put the tape on, but you still have the same issue with the tv just turning on anof off again? Would it be a ribbon or main board issue?

[@carnellcannon957]

Should this be a factory problem or recall?

[@ChrisDBest]

Hey DJ, I tried that tape method but it did not work for me what instead happens after blocking different groups on the connector I heard about 5 or 6 pops and I had smelled like burning metal so I disconnected the power cable and Waited a few minutes I didn't see any physical damage from the power board or main but when I plug the TV Back in The TV was running like normal but now I have a thick black line that runs vertically down the screen. Can I replace any of those display panel pieces on the on the panel board board or or do I just have to go away with the panel And lose the TV entirely?

[@hamil1058]

I try'ed to send you a photo but it came back Address not found

[@randolphdukes5383]

Can you send me the photo?

[@cannioto718]

Thank you so much for such a great video! This worked for me but mine was the bottom (shorter) ribbon.

[@EjAmfamilyfun]

I used the tape and I’m still getting sound but no picture. LEDs are one as if one of the ribbon cables are disconnected.

[@hamil1058]

Angel ibarra what do you mean flickering is it turnning it's self on and off

[@angelibarra332]

Is blinking like double imagen after 5 min when I power on

[@CarlosRodrigues-dk6lp]

Hey how are you i see all ur vídeos i got a problem with my Samsung Smart TV turnos off an on i try what u do on the same problemas u show but nothing any tips please???

[@shadowdragon-xo8sr]

Hello i have the same problem with my 58" samsung. I did your method and it stopped the on and off issue and has sound but still no picture. Do you have any thoughts on what i could do next?

[@hamil1058]

I try'ed to send you a photo but it came back Address not found

[@youmadthotv]

Check both ribbons

[@shadowdragon-xo8sr]

@@youmadthotv only have one ribbon

[@osmarwoolley638]

Thanks a lot for this video I have the exact same television with same issue. I Try to place the type exactly as you explain it. I was able to see picture in a position with horizontal lines at the bottom. I tried to improve it and now I can't get picture again. Any other suggestion to get the picture. Thanks

[@hamil1058]

this also works on mu6300 mu6290 and ku6500 ks8000 50" and 55" for all three models it's the shorter ribbin for the rigth side of the screen you need cover pins starting from from rigth to left of the ribbin cover pins 13-21 ( you can adjustpin , 13 to pin 14, and pin 20 to pin 21 ) this should work on 2017 models and up it also depend on how bad the panel is I repaired 27 out of 30 TV's this way this should work on any model also if the TV is turn it's self on and off cover pins 1 only on the shorter ribbin ( this works for tv's with flickering or dark blue screens and for tv's that reboots or turn on and off )

[@shadowdragon-xo8sr]

I was wondering if you could advise me one fixing my tv. I left a comment for dj but i want all my color lol. I have a 58" samsung with the on and off issue. I did his method but still dont have pictue. It stopped doing the on and off and has sound and even plays a channel through wifi but just no picture. Just the lit up black screen. I would appreciate any thoughts on if i am doing it right or not. Thank you.

[@timskylark]

Hey thanks a lot for this video I have the exact same television and mine just did this too I'm going to try it tomorrow let you know if it works another thing Samsung knows this is happening and they don't give a s**t

[@mikes8207]

They probably send the self destruct signal to the tv so you have to buy another one. No one can seem to figure iut why this common problem hlis happening with high end tvs

[@janetburkett3162]

I enjoyed watching your videos. Is that a common problem with them 70 inch tvs. I have a 70 inch sharp tv model number LC 70 LE660U THE tv turns on the back lights but won't turn off. I don't have a picture. Have you ever ran across this problem, could it be the main board.

[@djjohnson9791]

It’s probably the main board of not responding to the off signal

[@hottesthisweek]

I’ve tried it on my Samsung 50tu7000 the power stays on with blue screen and nothing to show can you please help thank you.

[@mikes8207]

I have a 70 or 75 inch Samsung crystal uhd tv that looks a lot like this one, but mine only has one ribbon cable. Anyone know where to start covering pins ??? And does anyone know what caused this. Mine happened right after i started an xbox x update. Thought that was ironic ?

[@thomasperno7855]

I Have the same tv but when I unplug the main ribbon cables one at a time all I get is a blue screen no sound or video. hoping you can point me in correct direction as to what's going on and maybe how to fix it.

[@hottesthisweek]

Does replacing the cord fix the problem

[@AQAVAR]

I have same kind of problem after fixing with tape, RED COLOR is missing from half of TV, how i remember some people are installing a tiny wire from damaged pin to actual point and fixing color problem like this way. Did you heard about it?

[@ChrisCarrier-u4n]

I did exactly what you did on the Samsung tv no picture and it worked. Now I have a vertical line on left side about 5 inches wide all the way down. What can I do there

[@jonathanrogers6138]

Thanks for the video helped fix my problem but is there a way to get rid of white vertical line down the middle of the screen

[@hamil1058]

no

[@barbaramayo3310]

Where are you located my tv has been this way for a year

[@djjohnson9791]

MOBILE TEKY search google for directions

[@georgechristolini7869]

Hi Sir what would cause my tv screen to loose brightness Thanks george from Ct.

[@g..._anthony27]

Just say what pins you covered?

[@robrepasi7975]

cover 9-12, 15-20, 24-25

[@hamil1058]

R1D1CUL3 covering the pins on the ribbens from the main borad to the display panel should not caused any to pop or burm the only thing you are doing is blocking signals to the panel did you make sure setted the ribbens al the way to the line on the ribben if you can tell me what you did i may or may not be able to help you

[@djjohnson9791]

that is what i am doing, blocking the kill signal

[@tynelson7945]

Will replacing the ribbon fix it permanently?

[@luislugardo6392]

That's what I wanna know too. I was able to find a new one from a TV that was broken out the box (Screen damaged) bought it from a seller on eBay. I will let you know if it works when I get the part in this weekend.

[@luislugardo6392]

Here is an update. I got the new cable in the mail today. I installed it and turned the tv on the picture came back and everything is working again. So replacing the cable worked for me. I put the tv back in bedroom and currently watching Thursday night football on Amazon prime on it. Everything is good so far.

[@Birdman85059]

@@luislugardo6392 you change the power cord, or the ribbons on inside?

[@luislugardo6392]

@@Birdman85059 my Samsung model only had one Ribbon and I changed that and the picture and sound came back. It’s been working ever since.

[@Birdman85059]

@@luislugardo6392 did you use ribbon from any TV, or did you get from same tv?

[@AzN254AbN]

I am following your directions and my tv now stays on but I still have no picture only sound. It is the same tv as shown in the video

[@Braunson]

Same here

[@masterofhaloben]

Same tried covering other pins no luck so far

[@tvbobbyd]

I was able to do the same with his exact model How ever Was this a Samsung secret from a tech ???

[@hamil1058]

Hay Dj Johnson there is a fix to get back all of the color if you cover pins 9-12 and leave pins 13-14 uncovered and cover pins 15-20 and leave pins 21-23 uncovered and cover pins 24-25 covered ( on the bigger or longer ribbon that should bring back all of your color I have a photo of what the ribbon would look like and if you don't what to count pin if you take the photo and over lay that with your ribon you can match the tape from the photo to your ribon and tape off your ribbon if that dose not work try moving the tape on pins 15-20 and pins 24-25 over left one or rigth one pin this worked for me and i got full color back this works for tv's 60" and above for tv's from 50-55" see my comments above

[@johnnyjuarez9878]

will that work for any model

[@alexandermartin8462]

You rock! With three pieces of tape covering around the pins you listed, I have what appears to be full color back. I owe it all to DJ Johnson and you hamil1058! Fricken wicked! Now I know eventually it will burn out, but hey it works for the time being. We already replaced this tv in our living room, so this is my new gaming tv.

[@creedman4400]

Hi if you dont mind could you send me a photo of the outline you have? I would honestly appreciate it.

[@hamil1058]

@@johnnyjuarez9878 2017 and up

[@shadowdragon-xo8sr]

Are there certain pins for picture

[@hamil1058]

Angel ibarra are talking about the red stand by ligth is blinking 2 times for 5 min.

[@Teleman01]

OK so I have a wild issue with this. So I did this tape fix. It's the exact same TV. Most of the screen looks good but the left side looks dull, just like yours at the end of the video. But what I noticed is, on Netflix, most of the movies are the same way. Left side looks dull, right side looks good. BUT..... certain movies I put on through Netflix look perfect! Almost like the color corrects itself. I start the movie, and the whole movie looks amazing. But when I back out and go to scroll through a different movie on Netflix, we're back to the dull colors. I can go through 15 movies and it's the same way. Then all of a sudden I pick another movie, and the colors itself and they looked great. Why on earth would it do this? At first I thought I was picking 4K movies and it was doing that. But not all 4K movies look great. Some turn out perfect, and then we're back to the dull picture on other movies. Very strange..

[@juicesemail]

Hey thanks- I used this method to fix my samsung TV. UN50TU8000FXZA. Only one ribbon cable on it and it was nowhere near pin 12, more like near the center of the ribbon cable. Ended up being just a pin or two I covered up and now I have like a single row of horizontal pixels that don't work. Its barely noticeable, and hey, the TV turns on again. Great video. Thanks for your help

[@g..._anthony27]

What pins?

[@heaeheae3891]

why not changing the whole ribbon cable?

[@djjohnson9791]

The ribbon cable is only a wire connection…does not change the signal

[@heaeheae3891]

@@djjohnson9791 but we cover the pins on it, right?

[@rafeehossain319]

@@heaeheae3891 The problem is de main board. There is no guarantee that everything will be solved after replacing the main board, but you never know it might. It is up to you if you want to take that risk. Let me know

[@kingwillie206]

@@rafeehossain319 - No, the problem is the panel.

[@luislugardo6392]

Changing the cable worked for me I got my TV working again.

[@justamp30something]

Can you buy a new ribbon? If so, how much does it cost?

[@FaisalKhan-pp6th]

I have Samsung class Tu6985 TV have Small Horizontal line top of screen hardly use the 20 time now warranty is expired can any one help me to Fixed the problem I really appreciate thank you

[@DMT669]

Spent 3 hrs following the whole process step by the TV back, but had the off colors tried different combinations of the pins but in the end took a shot in the dark Disconnected the other end of the same cable blew it off stuck it back in and the TV was back to normal no tape no nothing . So give that a try before you go all out.

[@djjohnson9791]

good deal

[@georgechristolini7869]

It,s a Samgung 40 in.

[@allen0088]

My 82inch Q60r isnt as bad as this one. I have only 10 percent of color loss on my tv right side. I was thinking of trying more but after watching someone else try i say naw

[@maritzaboezio7302]

Buenas tardes hice lo q ue indico en el video y el televisor enciende hasta hace el sonido habitual que siempre hacen antes de encender pero no se ve imagen . Que más podría hacer mi televisor es de 70" UN70NU6900FXZA

[@noerios4846]

Intentantalo en las 2 sintas de pines. a él le funcionó él la sinta de arriba a mí me funcionó en la sinta de abano.

[@roycassity8328]

lol

[@maritzaboezio7302]

Por favor me podrías dar tu número telefónico para hacerte una consulta urgente sobre un tv de 70" me es difícil así no se ingles