SCOOTER FAULT FINDING FAULTY SWITCH

[@cliveharmsworth2894]

Thank you for the video please keep them coming.

[@manfredseis5492]

I had the same thing with my first senior mobile home because the plastic buttons didn't come out anymore, I suspect there was a plastic part on the sides of the push button so that no dirt could get in and over time the button became stuck and couldn't be loosened in the starting position that was at the beginning of the 90s!

[@andrewm514]

excellent video as usual. Thank you for uploading.

[@davldcooksey4137]

Nice little video, every little helps,👍👍👍.

[@davidholley2985]

Hi wonder if you can help out please. I have a little problem with my Inverdale Auriga scooter, when i turn the speed knob to whatever speed i want and pull the wig wag lever all the way back there is no probs, but if i try and control the speed with the wig wag lever i find the scooter is very jerky. Any idea what could be the problem. Many thanks David.

[@tomjacques4]

david holley hi David like and subscribe and contact us [e-mail]

[@davidholley2985]

@@tomjacques4 hi i have liked and subscribed. Many thanks David.

[@davidholley2985]

Hi i wonder if you would be kind enough to have a look at the message i sent to you about the problem have with my Invacare Auriga scooter, and maybe you could tell me whay you think is causing the problem, many thanks David.

[@tomjacques4]

david holley hi David I did and I said to check the motor brushes have you done this and what was the outcome also what colour is the commutator

[@davidholley2985]

@@tomjacques4 yes new brushes put in everything cleaned and checked. Dont get me wrong the scooter is working great, if you turn the speed control knob the scooter works fine but if you try and control the speed with the wig wag lever it very jerky for some reason. Sorry to trouble you.

[@BleuJurassic]

Self Amalgamating Tape for Waterproofing Connections is good for connections that will get water on it, really stretch the tape to make it work warning it will become one lump of rubber you need to cut off but it really does work

[@tomjacques4]

Bleu Wolf I use that tape on larger wires and yes difficult to get back off due to the glue coating but once done I will not need to Repair again.

[@sammywayland1871]

I need compare my circuit board under ignition panel to a new one make sure they wotk

[@KENRHY]

I acquired for free a mini stryder scooter for my wife and it all seemed good,i tried to recharge the batteries and i think i decided they were dead so got 2 more and fitted them and the scooter will not move,no noises or clicks when i turned on the ignition,the dash has a green light and it flashes 9 times and then there is a pause.what is wrong????? i need hellllllllpppppppp!!!!!!!!!!!!!!

[@juanramos-nv2xi]

Mi scooter no avanza nada lso pita y pat