SCX10-2 Scale Driveline Introduction from GCM

[@scalebuildersguild]

Awesome stuff GCM! Game changer right here!

[@devonkunkel454]

Scale Builder's Guild gcm is amazing, I really enjoy watching your videos too, I watch GCM RACING, SBG, RC SPARKS/ reboot and the RC Network faithfully every night.

[@nicholasbarber4193]

That is clever! It really cleans it up nicely too. Well done gentlemen.

[@kinslersrccustoms6945]

that is the best set up that I have ever seen on an SCX10 ll !!!!! Look out here come the full interiors on all of the jeeps that needed one this is such a good thing TY GCM

[@GCMRacing1]

Thanks, Troi!

[@kinslersrccustoms6945]

I hit the link that you put up but it did not show me this set up, How much will it be for the top combo pack be for us to do up all of our SCX10 ll just like the one that you used in this video.

[@GCMRacing1]

gcmracing.ca/viewcategory.php?groupid=52

[@kinslersrccustoms6945]

TY I will be getting this and some hubs and rims , and so on and so on. but this one first man love it

[@kinslersrccustoms6945]

was the 3d inline 6 banger one of yours to.

[@anibalbabilonia1867]

Man that looks sweet!! Awesome set up! Got to get me one of those! You guys do a great job in upgrading the rc industry! You guys are like the Rc4wd of upgrades! Cool!

[@GCMRacing1]

Thanks! That's great feedback!

[@mrDarksand]

Cool to hear that gearbox will fit any SCX10. I orded a metal/carbon chassis from banggood, but the center drive-train just is to big for lots of body-shells, so i did order the two-speed transmission with the V8 combo in the hope it would fit. Parts are not in yet. The only thing i do not see is that there is no slipper clutch in this transmission? There is a big one on the original? Still wondering if it is smart to put a brushless system on it.

[@GCMRacing1]

I haven't used a slipper clutch for at least 8 years on any of my trucks. Not important for this style of offroad, and if you know enough to not pull the throttle when it's completely jammed in solid somewhere.

[@tgh117]

awesome looking product. it appears that it could also fit an ascender platform with not much modification if any at all. keep up the great work.

[@wasabipet67]

Hi, scx 10 ll, can you explain more information about servo , I put servo in front but the horn will touch the ....How to fix , thx ...

[@ArielsSmartyPants]

Nice to hear there will be combos with what you need for us dummies :)

[@FiendRunner]

This is a great setup. However I would like to get a V8 block as I am not using the original body, but going for an old school 55 ford truck or chevy Truck (if I can find it) body. Could I get it with a V8 instead of straight 6?

[@robmathews9937]

This is the best thing I have seen all day! YES YES YES

[@stwright318ify]

I believe looking on your website that you have to buy the gear sets to go inside the transmission and the transfer case correct? You guys have done a masterful job of making the motor, trans and transfer case look true to 1:1 scale. Would a V8 motor fit instead of the straight 6? 👊😀👍🇺🇸🏁🍻

[@GCMRacing1]

IMA RC Addict all the gears come with the case, a full kit is sold. We also have v8 motors, yes.

[@wiccanfpv]

I notice your panhand bar is on the wrong side did you have to change that for this kit to

[@GCMRacing1]

None of that has changed from the all stock Axial kit parts. It's frame side left, and axle side right, as stock.

[@xxoTUBBSoxx]

Hey guys, Any idea if this would allow the interior of the LC80 hardbody to fit on the SCX10 i ?

[@GCMRacing1]

It should fit fine with this, yes. At least the transmission won't be in the way anymore

[@xxoTUBBSoxx]

@GCMRacing1 awesome, thanks for replying so fast. I'll be picking one up soon then! I got the LC80 body when it was first released and never used it, have been wanting it on my SCX10 I for years

[@michaelmoore9629]

Will the motor covers fit over the Hobby wing quickrun fusion motor esc combo?

[@GCMRacing1]

There's a bit of variation on all these new motors, brushless specifically. So in some cases you have to remove a chunk of the side of the block to get the wires to come out, and in some cases, you have to remove a bit of the bottom pulley for wires to come out, but in any case, a round motor can is a round can... still.. so with some mods, most of the motors I've ever seen can still be used on these new brushless setups.

[@tylerkerr8704]

Where did you get the inline 6 scale engine from, I’m trying to make a Cherokee build and I can’t find it anywhere

[@rccrawlervenezuela]

Excellent Video, and excellent piece to optimize my SCX10.2 and get a better height for my LC70 body. This combo includes manual for all the gearing and installation? Is it available in the USA Store?

[@GCMRacing1]

The USA store does have the item. Check for stock at the time of the order. There are videos for installation, check web pages. Thankyou

[@FiendRunner]

Also, if using a standard lipo battery, would it not over weigh one side down?

[@devonkunkel454]

I have watched your videos every day for the past 2 years. I can't get enough. I finally got a scx10 ii , where can I get a Comanche hard body and interior, if you could give me any tips that would be amazing. I need tiny trucks in my life

[@GCMRacing1]

Yes, you do! haha The body and interior can both come from JSscale.net or you can get the body from TeamRaffee (the one with NO front window screws or holes) and the interior from R3Designz on facebook.

[@devonkunkel454]

GCMRacing1 - Scale Truck RC in Canada thank you

[@maurosorrenti591]

where can i buy the kit to move the transmission forward?

[@GCMRacing1]

gcmracing.ca

[@darrindavis4861]

Can it fit the scx10 II with a 4 link set up in the front??

[@GCMRacing1]

Yes, but you still need to move the servo OFF the front axle (which is common for a 4 link front)

[@PowerhouseOffroad]

Chris, pardon me if I've missed it...but what motor (Brushless) and pinion setup you recommend for nice clean slow crawling with 10.2 axles. I've got the kit and it's BEAUTIFUL! I've got plenty of motor and pinion options...just want to start strong!

[@GCMRacing1]

You sure do! I strongly VERY much recommend the castle slate full combos. They matched their electronics perfectly in the ESC to match their amazing sensored crawl motors, and it can't be beat!! So crazy smooth! I'd recommend the 2800kv motors in the SCX2 with our scale LowRange trans. www.castlecreations.com/en/rock-crawler?category=bc2b9421-4aea-48aa-8828-468abf4f3e2f

[@PowerhouseOffroad]

I have both the motor and esc on hand. I will pop them in and go from there! I didn't realize the pinion was included. That makes it easy. Thanks Chris!

[@jrduenas3678]

Is this sold in the U.S.?

[@davidspinney7344]

So if I'm running the kit version just swap out the skid that's in the parts bag and good to go?.

[@GCMRacing1]

Correct!

[@curt248]

Where does the main battery go? Is that the small battery you were saying goes on the right? So if a scale drivetrain then you will need a very small main battery? I'm new the the hobby so forgive my elementary question

[@dustinf11]

curt248 they probably plan on using a 2200mah battery on the side. It is smaller, but with this gearing; It will last quite awhile.

[@GCMRacing1]

Dustin is right, we use 1100mah 3s or up to 2000mah 2s batteries, and that's easily an hour of trail driving with our trucks. The batteries cost so little, and fit just about anywhere, so we've completely done away with large batteries in scale trucks now. The 1500mah 3s battery in our big D110 truck regularily runs 1hr40minutes in scale comp type of driving.

[@rcvalley8706]

Do you think this setup will allow enough clearance to get a China jk or new team raffle 4 door on there?

[@GCMRacing1]

Certainly the front end parts will work great on that now.. but there's still rear shock tower problems, and mounting issues putting those bodies on the SCX. There is the Skeleton chassis that's a direct fit for the China JK.

[@NotStephenColbert]

When will you have more of these kits in stock?

[@GCMRacing1]

We have lots in stock. Our stores get regular deliveries also.

[@craig8159]

Where do you get the motor cover?(small engine look)

[@GCMRacing1]

exclusive-rc.com

[@craig8159]

Thanks. The stuff they have is so friking real looking love it. found me a new store. lol

[@andyrichey1192]

Wow I like that, i'll be checking in on this. Appreciate you sharing

[@samg3203]

I have a SCX10 -2 Honcho RTR my first real truck I love it! Of course I want to upgrade the hell out of it! I’d like to run that style of motor/gear box to get it over the front more, I’d like to know where to put the battery, not real keen to run it in the back, 2 x 2s one on either side workout how I could run both cells at one time then just have the ecu ect at the rear.? Just a rookie idea! Would love to see how you finish this truck mate. Thanks for making this vid, it’s a cool hobby I love it, just wish I had more money😜

[@whostheboog]

You should turn down the volume level for your beginning theme. Although quick and to the point it is very loud. Great video, neato innovation, and only said that because of the comments i read no one mentioned it.

[@anibalbabilonia1867]

Is that something you gonna have as an upgrade in the near future?

[@GCMRacing1]

ALready in the gcmracing.ca store, sir. Thanks for watching!

[@CarminesRCTipsandTricks]

Simple and Brilliant Chris!!! 🍻👍👍 Is a standard gearing (non OD) Transfer Case available? Carmine 💥 ⛽

[@reddeerrebelrc6674]

Will this work with 4 link?

[@kennethbmason]

Will the rc4wd v8 work with this setup?

[@GCMRacing1]

Our motor plate and our LRT2 Tcase/Trans combo are the important parts to fit this mount set. You can always bolt the RC4wd motor on to the motor plate from the LRT2 combo. That's been done several times.

[@andrewrichey7374]

WoW!! is this Awesome I love it.will a v8 work with this setup?

[@GCMRacing1]

Thanks! Sure, there should be lots of room in the front, and as long as the motor isn't wider than the shock towers, it will be fine.

[@rcrehab9623]

Amazing stuff guys!! Take my money!!

[@94auwing]

Need a 4bt and 6bt cummins

[@karlschweizer2554]

nice nice nice you guys make the coolest stuff

[@GCMRacing1]

Thanks!

[@alphamech9283]

only on the intro and im liking the video already.

[@pfarraldcash6095]

Wich links are that ?

[@GCMRacing1]

This is an RTR SCX2 truck we used for a donor. The links are factory, except the steering pushrod change from the GCM kit.

[@danhodgkiss9798]

@@GCMRacing1 does the rc4wd scale v8 bolt up to this trans

[@saefulabdulazis5430]

Bisa kirim ke indonesia?

[@MrCaprinut]

Very nice! But the sound level on this video is really low!!! I can't hear a thing. But looks good thou :-)

[@abeman5855]

Yes, yes and yes!

[@brianhilligoss]

Not a first for front overdrive. Toyzuki v2 was the first.

[@GCMRacing1]

Cool! I've never seen something in the SCX other than B3E Designs, but he's not producing for sale I don't think.

[@markusphillip1074]

i want 1 with a V8 man 👍

[@kcmullins6179]

I gotta pick this up for my Team associated Element Enduro Trail walker. I'm positive it'll work they look identical frame wise ect. Plus axial n element/Team associated are the children of horizon hobby lol. And if for some reason it doesn't fit correctly I'll modify what ever I need to 😂.. I'm building a trail truck / mud bogger scale truck I got three bodies atm I'm gonna use specifically for it. a 72 Chevy pickup and a K5 blazer and a 77 ford F250 high boy.. the F250 and Chevy pickup I'm going to weather ect. and the blazer imma paint it baby blue and white or a ocean blue and white. I got all kinds of bead locks and tires ect. Iv also taken a set of my Proline Super swamper bogger 1.9s and wore em down purposely "which btw they are about a year old or so anyway and I got 3 other sets two of em brand new never opened lol. Then I got the RC4wD ones I got two sets from them of the boggers. Which are in the packages still. Then I got the famous RC4wD knock off of the interco boggers the "Mud Slinger XL" which I like em. Then I got my personal favorites the Interco Super Swamper TSL/SX all terrain which is the most famous in the 1/1 real world. I got tons of those iv bought maybe 20 sets of em over the last year lol. I got diff compounds which the proline predator compound is my favorite but for the mud bog I'm gonna use a soft yet more stronger compound of the TSL SX swampers and boggers. I haven't fully decided which truck is getting what set of tires n rims atm. But when they are finished they are going to be amazing. I'm even putting real head liner in em real interior lights ect even carpet n rubber mats lol and rusted floor panels lol. And the Ford will most likely be my ginnie ping on motor n esc testing.. I'm actually putting a monster big block brushless motor in it. A 4076 2200kv on a hobbywing Quicrun10BL120 which is currently in my Arrma big rock. Then I got a few other esc and Brushless motors to try out both sensored n sensorless. Reason for the massive big block is because of the mud bogging I want all the wheel speed n raw HP / torque that motor can give. If I break gears I got plenty and my dad owns a Machine shop so I can have custom aluminum and stainless steel and titanium parts made same day all I gotta do is drive over to his place lol. He builds alot of crazy custom parts for bashers like Arrma 3s n 4s mostly metal parts ppl want but can't get like machined aluminum chassis and center drive shafts ect. And he does some really cool custom parts ect for his SCX10/3 and his element Enduro senduros ect. But I deff wanna see what a big motor like that does n performs inside a trail truck.

[@GCMRacing1]

Nice pile of projects! We do already have a kit for scale driveline in Element chassis, no need to fab stuff! ... Having a bigger motor might be a good way to get some low weight in a truck. Never know. Might be good!

[@BushmanofYukon]

Awesome!!!!!

[@DevinWhittaker]

please normalize you volume on videos, not much more annoying than quiet voice recordings causing me to max volume, then BAM super loud intro music.

[@rishacircuit1594]

RIP to headphone users.

[@iamthetinkerman]

music WAY too loud bro, no need!