Shark vacuum brush not spinning fix

Shark Model: UV850 front roll not working

[@RexxDIY]

Here is the link:

[@kdsmclife7080]

Thanks for the video! However, you left off two CRITICAL steps in the disassembly process: 1) to get the soft roller off, you have to take out the screw sitting underneath the floor wheel - this was not pointed out and it took me awhile to figure it out; 2) to get the main roller assembly off the frame of the vacuum, you do need to remove one screw just to the right of center, then the main roller assembly lifts right off. These are two critical steps that should be added to your video, then it would be perfect!

[@JW-ex5pd]

Having the exact same issue with the same vacuum from Costco. I tried taking it apart, but didn't know about the hidden top screws. Thank you!

[@stewbee9361]

yes this seems like a notorious problem for these vacuums. thanks for the video

[@ralphowens4510]

I think that was my problem, already ordered new vacuum, since we have had it for 3 years. But , I did order new belt and will see if that fixes it. Thanks

[@maryjeffers4986]

Is the top yes is the top

[@gogogg4610]

Very helpful, but why do u speed up the video... so so frustrating!!!!

[@dragonheadretreat]

Ok. Belt is NOT broken, but tiller isn’t spinning. What else might issue be?

[@howitlookstome]

Where you show “need to remove this wheel”-- how do you remove that? I’ve got everything else off except that corner

[@jaustind123]

Bought at Costco stopped working almost right away. Should have returned it.

[@judetheobscureartist]

Getting the right size screwdriver, a T20 was really helpful. The screws under the upper lid which I pried off using my smallest flat head in the middle of the back ( side nearest the cannister). were smaller, T10?. There is also another screw inside that has to be removed. Facing the machine it is to the right of center behind the roller in the open. I have a UV850 and the belts cited here fit perfectly. Also I used my smallest Allen wrench to pop up the wheel that has the screw underneath. .

[@gearofhalo4]

Perfect tutorial short and to the point thank you!

[@thejunkboxcollective]

THANK YOU!!!! I couldn't find the hidden screws a couple years ago! I gave up on fixing it and have only used the hose since then 😂 I can finally fix the large roller because of this video!!

[@DESERTCB1]

Yo Dude! Thank you for getting us the data clearly and quickly! Well done!

[@FedexSpikyhair]

You are a life saver man

[@danielganciar7193]

Thank you for the video!🙏🏻

[@TheDeckerFamily]

thanks for the info!

[@user-sz9ue1tb9d]

Tanks a lot was almost givin up! Till I seen ur video👍🏾

[@lindapoworski2597]

Hi there great video. I have a similar shark vacuum. I have it all apart. My belts are intact but the brushes are not spinning. Im down to the main board. Where is the thermal fuse on these. Thank you.

[@NEEUch]

had a rock stuck in the roller. thanks for showing how to open the darn thing