Shark Vacuum Loss Of suction Fix

If you enjoyed this video please give it a Like👍 and make sure to subscribe! I am trying to get to 1k subs fast.
If you would like to support my channel, I have an amazon wish list linked below⬇️. Everything in my wish list goes to KZbin videos and content for all of you.
🦋My Amazon Wishlist-www.amazon.com/hz/wishlist/ls...
I greatly appreciate all the support I get from you guys!🥰

[@marvinmiller7244]

You just saved me the price of a new shark! I had no idea you can separate the base!! From the brush head to the canister was jammed with carpet fibers, cat hair and what ever else was stuck in there THANK YOU!!

[@michellev666v]

So for anyone still struggling basically make sure check the black hose. Mine was so clogged with hair and dog hair. My issue was with the black hose. The clogg was deep in the hose and handle area. You can't remove the handle from the hose so I bought a larger bottle brush and pushed the clogg through. Make sure you don't lose the grip of the handle to the bottle brush because it is hard to pull it back out if you go too far in. I did several runs and attached everything back in. I turned my vaccum on and the clogg shot through and I had a large furry mess in the bin. My vaccum works great now. Try a bottle brush :)

[@doloresbriseno7744]

Mine is all cleaned out but the roll is not rolling? The light at the bottom won’t turn off

[@vkouchnerkavich]

I noticed a strange sound coming from my Shark. After watching your video, I looked at my hoses, and the top “handle” hose was super plugged. We took a wire brush and a wet vac and after 15 minutes we removed a very packed lint/hair blob about 4 inches long. The suction is much improved and the noise I heard is gone. Thanks for your video.

[@denislee3931]

Yay🎉

[@NourPro-t6r]

Shark should pay you for this you just saved my day. My shark nav stopped suctioning. I followed all the steps now is suctioning like a brand new vacuum. Thanks a lot

[@angelryan9624]

Thank God I found you! I had 2 shark vacuums I gave away for no suction! Got a new one& it quit sucking fast! Watched your video& found the clog! Cat hair! Thanks so much!!!!

[@fotogenicas123]

*Works great and is lightweight **MyBest.Tools** Comes apart for cleaning/fits back together easily. It replaced my carpet shampooer. Great on hardwood as well.*

[@RCLEE23]

Thank you very much. People like you make KZbin the great resource that it is. You are invaluable.

[@jessicarosgaard2212]

Thank you! This was incredibly helpful. My Shark lost suction - I had cleaned the filters, didn't realize there was a clog. Found it thanks to your video. Now my machine is clean and works like new!

[@DillonCleans]

Awesome!!! So happy I could help out!

[@doubledoubletwnktwnk]

Shroud. Cleared it, and no more weird noise and overheating and poor suction. Many, many thanks!

[@sarahjune162]

This video saved the day! I was about to buy a new vacuum because I did everything I could think of to try and fix it. Turns out there was a huge clog in the hose. Thank you!!!!! You saved me a lot of frustration and a couple hundred dollars 🙌

[@racheltucker8054]

You brought my vacuum back to life! Thank you. Was just about to purchase another one(that I really couldn't afford)

[@ameliaanne1024]

THANK YOU. I just unclogged my Shark Rotator after watching this. There had been no suction - none! I went through all your steps, finding two substantial blockages. This vacuum is working again, as if it just came off the shelf. I live in the country (dirt, dust and mud) and have 2 long haired dogs who shed and 2 cats who shed. I will add a complete inspection of the vacuum to my preventative maintenance calendar every three months and keep after the brush roller much more frequently. Thank you again, for both knowledge and empowerment.

[@DillonCleans]

Awesome! I am so happy I could help you out! If you take care of your machine, your machine will take care of you. And you can’t go wrong with shark vacuums

[@pattiepeters7955]

Fix it ! Thanks to you. Grateful for your kindness and sharing.

[@terrellsanders5598]

Thanks for sharing! I love my vacuum cleaner. It recently stopped functioning properly. I had no idea I needed to maintain the vacuum. Needless to say it was filthy. Cleaned it and it’s running smoothly. Thanks!

[@DillonCleans]

Glad I could help!!

[@ramonaphillips7215]

Omg, I can't thank you enough. I don't have the exact Shark Navigator as you demoed, so it didn't come apart nearly as much as your model. Anyway, I followed all of your advice, but since mine didn't come apart, I used just the top part of a Dyson stick vacuum to try and clear any clogs. Originally sucked out a huge ball of dirt and dog hair, but the vacuum still didn't work. Your video encouraged me to keep checking for clogs, and using the Dyson, I actually sucked out a paper towel. I was angry at first that some idiot sucked up a paper towel in my less than a year old vacuum, but it's working like new now. Thank you so much. As a side note, people don't loan anyone your vacuum.

[@DillonCleans]

So happy I could help you out!

[@juliemargauxkelleher4201]

Thanks so much. The blockage was in the hose. I'm so proud of myself right now for fixing the vacuum with your help!

[@DillonCleans]

So happy I could help! Fixing your vacuum isn’t difficult, just takes some understanding how a vacuum works and where to look

[@mmorrison7452]

OMG! This helped me so much!! Thank you! The wand was sooooo clogged. I had no idea now find a clog or how to unclog it, nor did I realize that I could, let alone should be cleaning my filters. Thanks again!

[@DillonCleans]

So happy I could help out!!

[@andreaedmunds8127]

Thanks for sharing my husband came to me to say it’s broken, I said let me see. After watching your video it’s up and running 👏🏽👏🏽 I fixed the issue👏🏽👏🏽

[@DillonCleans]

Awesome!!! I’m so happy I could get your machine running again. If you have any other vacuum trouble you can take a look around my channel. It’s 100% vacuum related

[@cynthiadowling6783]

Thank you so much. I washed the filters you said and didn’t touch the hepa filter. After watching your video I went back to the vacuum and cleaned that inner column now it’s working like new!

[@robert9461]

Thank you so much for the tip about the front rollers. I didn't realize the cover was removable (not to mention that the roller is). The motor on my Shark just stopped out of nowhere so I was looking for a miracle fix on KZbin, and there it was!

[@recharles1018]

Thank you for this!! After watching your video, I found a clog in the flexible hose coming from the head. The wife was already shopping for a new one. I appreciate you!

[@sivasubramanian5071]

Thanks your video helped me to clear the clog and my vacuum works fine now. Keep up the good work 👍🏼

[@orlandodee3240]

Thank you for your valuable tips. I cleaned the shroud filter and my vacuum cleaner came back to life. Two thumps up!

[@chrissytipp90]

Your advice worked! Thank you so much! I love our shark and was stressing about buying a new one!

[@teriberrier9064]

Thank you Mine is 4 yrs old never realized the filter in the front. Took it out mine was black. Use an air compressor to blow out carbons and looks really clean. Runs great now. You showed me things I didn't know. Thank you❤😊

[@esperanzajackson7953]

Dillon, I am impressed. Your explanation, in your video, was so simple and so clear that it made it easy for me to check -and clean- my vacuum cleaner. Thank you so much for taking your time to help out - Esperanza 🥰

[@sarapereyra9450]

Thank you. You’re awesome. My vacuum is working perfectly. Your mother must be proud of you.

[@DillonCleans]

She certainly is!

[@avidmario4111]

I can't ask for anything more!!! Well explained, thanks! My vaccum cleaner works now

[@DillonCleans]

So glad I could help you and your vacuum! I hope you get lots lots more life out of your shark!

[@abderrahimkherchttou9692]

Thank you so much for this helpful video! My dad thought that I was great when I fixed his vacuum 😉 Thanks again!

[@texasgirl2319]

I appreciate this so much I was about to cry my shark vacuum wasn’t sucking at all! I watched your video took it apart and found a plastic plug cover wedged. In the hose you saved my sanity. Thank you! Thank you!

[@DillonCleans]

So happy I could help you out!!

[@CindyLavan]

Thank you for your video. It was most helpful. My Shark was a little different but following your instructions was able to figure out the problem…a big clog in brush roller. I will be a more diligent vacuumer from now on.😊

[@ultra8067]

O no.. I've done washed those parts a few times within 5 years and today I did due to lost of suction and you are correct I see a little rust here and there on metal but not really bad yet though..hopefully I didn't do major damage smh.. Glad you've created this content sir.. Thank you 🙏

[@hoehn731hoehn5]

Thanks,so much,did all filters but never new of the screen filter in the dirt plastic box, thought I would have to buy a new one 😊

[@holleypatterson8631]

Thank you a million. This solved my problem. I was ready to throw it in the trash and never buy another shark. It’s working as if it were the first day I bought it.

[@DillonCleans]

Awesome! So happy I could help you out!!

[@HinsonCo]

Thanks! For me it was the shroud! Cleaned it and it works again!

[@vivianette7029]

Thank you! Vacuum working well again. Thanks for the empowering video!

[@natmartin4951]

FIRST OFF .. THANK YOU FOR THIS VIDEO. My God man..you helped me so much. I was about to go buy a new vacuum

[@nashitahstephen608]

Young man, thank you for saving my life. Thank you sooooo much

[@deedee7780]

You just saved me $70!! Thank you!!

[@mirafoote896]

Thank you so much! Thanks to you I was able to locate and clear a huge clog near the top of the handle. I could not figure out how to get the handle off to remove the clog. Also thanks for explaining about the hepa filter.

[@louisemcgoey7669]

Great explanation - thank you!

[@charisselim5770]

Thanks for this video. Now my shark vacuum is up and suctioning 👍

[@katbatson]

Wow this is life changing, I’ve had my navigator for 4 years and never rinsed those… they have been rinsed and the water was black. Thanks for this video!!

[@DillonCleans]

So glad this got you to clean those filters. Make sure to do it as needed. I’m sure your navigator works so much better now and I hope you gets lots more life out of your navigator!

[@TwilightLugia3532]

Excellent presentation and very informative. Thank you kindly for the help!

[@DillonCleans]

So glad I could help!😊

[@Idonotwantayoutubehandle]

This was a great video. I cannot stand it when people post videos for troubleshooting and they act like we know what they are talking about. Thank you for explaining this to someone like me that has no idea how to troubleshoot anything.

[@njmcalur]

This was a great explanation of the vacuum!! I just saved a lot of money!!! Thanks!

[@DillonCleans]

So happy I could help!

[@brentmitchell9714]

Thanks so much for this informative video! Thanks to you I was able to find the Lego piece blockage and fix the problem. Big, big help!!!

[@irenekovacs6115]

Thanks! Extremely helpful. I had no idea all those pieces came apart like that.

[@DillonCleans]

I’m so happy I could help!

[@gingerepalacios]

Thank you! I have the black one in the video and I forgot to check one clogged spot and sure enough! Thank you! 😊

[@DillonCleans]

Awesome!! So happy I could help out

[@scottb_02]

Fixed my issue in a few minutes, thanks!

[@imwalt3439]

Wow. Thanks for this. I didn't know there was an "after" filter. Took it out in my shop and blew it out with compressed air. Couldn't believe all the dust that came out if it. Vacuum works like a charm now. I guess I'll have to do that again before another 8 years go by.

[@DillonCleans]

Haha it’s not common for people to know about it. But if you take care of sharks, they take care of you!!!

[@TimKearn]

Instructions for finding a clog worked! Thanks so much Dillon, appreciated!

[@elizethlaguna4704]

Thank you so so much! I was gonna take it in to get fixed but after watching along with you and going step by step..I found a big clog near the bottom hose. Yay

[@DillonCleans]

So happy I could help!!

[@7mugwumps]

I noticed a strange sound and would automatically turn off because of overheating. I saw your video and started poking around on the machine and finally found at the very top of the machine where the handle is, there's a curved area of plastic connecting the hose to the extension bar that disconnects. Totally clogged!!! I almost thru this vacuum away. It works now!!!!

[@senramas]

Good video, it really helped fixing the suction issue!!

[@timreid5103]

Thank you for your video, this fixed my issue! 🙏

[@JenniferGonsoulin]

This was quite helpful. Thank you!

[@teknoman0818]

Thank you so much your video help alot...I cleaned everything and never noticed the shroud clogged and soon as I cleaned it, it got quieter and have its suction power back.

[@louisemcgoey7669]

Great explanation. Clear & easy to follow! Thank you.

[@lilystockdale3938]

so grateful for this! Didn't know all the parts I could disasemble and found my blockage!

[@DillonCleans]

Awesome! So happy I could help 😊

[@janetcox3622]

VERYYY helpful!!! I thought my $300 vacuum was a goner...but after watching your video...i missed a compartment and sure enough it was clogged solid. thank you for posting!

[@DillonCleans]

You’re welcome!!! Hope your vacuum gives you many more years of service

[@davidjenniferkanerk2475]

Great video! Thank you 😊

[@treywhite9188]

This just helped me so thank you!!!

[@draysk3899]

THANK YOU VERY MUCH FOR THE EXPLICIT TURORIAL!!!

[@elizabethdalton1518]

FANTASTIC! THANK YOU SOOOO MUCH!

[@xela-_-]

Thanks Man!!!👍🏽 You def helped me out!!! I have the VERTEX😅

[@agawamguy]

Thank you, thank you, thank you! I found where our vacuum was plugged. You are the best!

[@DillonCleans]

I happy I could help!

[@rosemariejenkins3139]

My problem was in the handle. I did have to take those screws out and open the loop handle. Thanks for the video, it was helpful.

[@johnchildress6133]

juat watching you take the unit apart was enough. Success! Thank you!

[@DillonCleans]

Yay! So happy I could assist

[@sirpudge241]

Very informative. Thank you!

[@debs106636]

Thank you! This was so incredibly helpful and easy to understand. I'm back on track, thanks to you. I thought I was going to have to unscrew and take this all apart and was so thankful to learn it was not necessary. This is exactly what I needed.

[@DillonCleans]

So happy I could help you out!

[@laurenmckenzie7264]

Thank you!! This is so helpful!

[@MrStinkFinger2u]

Thank you so much, you saved us hundreds!

[@SusanHunter77]

Thank you- I was able to fix it- my two less obvious filters were the culprit…

[@ccaarryy]

Thank you! This video is very helpful :)

[@morrishappyfeet]

Thank you U save me so much money I was thinking of buying a new one till I found this video..

[@johnpuente6095]

Very helpful. My Shark works well again! Ty

[@peebeez6215]

Thanks for the video, helped me fix my problem, I forgot to open the top latch, a lot of dust and do hair trapped in the area.

[@DillonCleans]

So glad I could help. Shark vacuums give good performance, but they do require more maintenance than your average vacuum. Make sure to stay on top of maintenance!

[@nicoleperkins2391]

Thank you! Fixed it with your help!

[@yvonnecastaneda4450]

Fixed my issue thank you 👍

[@appleget]

Thank you so much for the video! You were a huge help

[@DillonCleans]

So happy I could help out! Thanks for watching and supporting the channel!

[@Kwadwo.bank1]

thank you , you're a life saver

[@ashley.p]

Suction returned! Dillon, you are a vacuum superstar!

[@HerLovesBooks]

This was extremely helpful.

[@williammacdonald5209]

Thanks For Help Great Job

[@medini2]

Wow....this was very helpful to me. I've had the Shark Navigator (bought at Costco) last summer. Love it. I am wondering now if there is some place the attachments can hook up to the vacuum cleaner?

[@DillonCleans]

Do you mean store on the vacuum? There should be a clip at the top of the handle or down by the bottom of the vacuum depending on what machine you have. If you are taking about using the tools, all the tools fit on the handle or end of the wand to use

[@Julandtv_]

Thank you so much on how to teach me how to detach the vacuum and clean the clogged hose

[@fredbosco6104]

Thanks Dillon! U rock!!

[@rachellovely3507]

I have the apex and mine isn't sucking up crumbs and low suction. I will do this, thank you 😊

[@barblewis24]

Mine lost suction because the cone was really clogged. It couldn't breathe, basically. I had sucked up remnants of ash from the fireplace. The ash (way too fine) completely clogged the cone and turned the new filters brown. This video helped me make sure I didn't miss anything.

[@Shenanigans303]

I have a purple shark just like the one in your video and theres a small rectangular port on the side of vacuum below the canister that sometimes makes a loud sucking noise until i plug it or cover it. What is it for?

[@sleepygrumpy]

you fixed my vacuum, thank you!

[@DillonCleans]

Thanks so much for watching!!!

[@peachycliodhna2223]

This fixed my issue! Thank you so much! 🙏🏻 Also, I think you may have just sold me on buying a Shark vacuum…

[@DillonCleans]

So happy I could help!

[@hazelbasil6451]

THANK YOU SO MUCH!! ITS FIXED!

[@DillonCleans]

You’re so welcome! I’m glad I could help.

[@katkanning]

Thanks, fixed it!

[@isaacgarciaduran750]

THANK YOU !

[@rose5150fl]

Omg your the best!

[@WKBredhold]

Thank you!

[@tedmcc75]

Great video, thanks man!

[@DillonCleans]

So happy I could help!

[@samuelbahena4528]

Thank You!!!

[@kevinmurphy3081]

Thanks a lot it was the trick. My shark works great now.