SHIFTING MY 318 AT 7700 RPM!!!

[@danvye88]

Hey man, those Crocs are only NHRA approved when the safety strap is flipped back! Sounds good off the limiter!

[@mikeg4163]

Love that Mexican scenery…;)

[@BenzoBoi6969]

I love how people wearing Crocs always want you to know it

[@kylehurley7707]

from rolling burnout, straight to the gas pump 😄 🤣

[@CremeDeLaMeme.]

thats the way

[@jaycoy107]

As you pass those apartments with tires leaving rubber on the road, ninety percent of the residents are in there thinking "too loud, and too fast". Meanwhile, people like me who may be living there are thinking, "I gotta find out where that guy lives, and hang out in his garage":).

[@loganshotrod4x464]

I’ll be a 440 man til the day I die but I have to admit… I’ve lost races to more than one 318 over the years… a highly underrated engine indeed! 🤘😎🤘

[@SebastianWoodard]

It's cuz it's literally just a 340 with a 130 thousandths smaller bore. Any tricks you can pull, so can a 318, except people give away those 318s cuz they think they're low compression fleet engines and don't understand the potential so they'd rather go get a 340, 360, or 273. The 67-69 218s shipped with 273 connecting rods and cranks, unless it was the -3 model engine (truck engine,) then they'd use a 340 bottom end. Just boost that compression up and she's running with a 340 easy.

[@sirswerve2493]

Love the Cuda man. wish I could see it in real life. Love the 318 stuff you been kicking out. long live the mopars and Hotroding!

[@jerryvelders4457]

The 318 was a great engine .. highly under-rated ..

[@tenthousanddays2103]

They are especially good with a 4" crank. I believe this one is a 402 cid . .090'' over 318 with a 4'' crank.

[@fourocker]

Man that is the beefiest 318 I've ever heard, I've owned two 318 cars over the years, a 69 Valiant VIP 4 door and a 70 Valiant two door hardtop here in Australia, I loved those 318's, people don't give them much attention but they're bloody good alright 👍

[@petergehle4222]

I built one for a customer in a VJ 4 door. First run out 11.06 120mph first run. New converter getting fitted should go 10s.

[@RA31A]

No one has been able to get a straight answer but there is an extremely high likelihood it is not a 318. People with strokers have a bad habit of calling their engine what it used to be.

[@jamieostrowski4447]

Wow! That is the best sounding 318 I have ever heard!

[@williamstamper442]

Love this car and content more than I thought I would! Makes me realize I gotta get my life back together and get my 70 442 back on the street. The last incarnation of my car went 11.20s all day on ET streets and 3in tailpipes. Since then I built a 620hp 455 but then the car got caught in paint jail then life went nuts. It's been 20 years since I last raced my car. This vid makes me want to get the car back out real bad! Thank you bro.

[@thephantomzoneboxing]

so whats the update?

[@donaldcameron8909]

Ultra super underrated engine , true sleeper always respond well to upgrades , its cousin is the 340 ! Fucken-A killer ride totally

[@kuiper6926]

More like it's son. The 318 was the base for the development of the 340 after all

[@danielbrealey2924]

Really nice Barracuda, mate... That small block is a free revving little thing, huh- awesome match for a 3rd pedal... Nice car bud 👌

[@garysgarage9827]

Thank you sir

[@danielbrealey2924]

What trans gas the ol' girl got? It shifts pretty nicely at 7700RPM! That's no A830 shifting like that... T56 TR6060? 🤔

[@usedtruckemporiumusedtruck4166]

@@danielbrealey2924 its a 4 speed car, it wont be the t56 or 6060

[@waynecanaday341]

@@danielbrealey2924 yes it's an a 833 I can shift one through 1st to 2nd leave nothing but a solid black mark if I wanted 2 with lots of internal modifications

[@danielbrealey2924]

@@waynecanaday341 I can shift like that in anything as well, but it's the high RPM shifts that the synchros don't like

[@Ray56z]

318 huh, never thought of building one. Had a '64 Barracuda I really enjoyed. Bought it to drop in a 273 that was built for a dirt track car. Later I bought a wreaked Dart with a 340 and had it built by the same builder-even the local big blocks hated me. Just never thought of starting with an actual 318, no one did in those days. Seeing yours, we missed out on some extra power plants we could of been building.

[@edzimdahl1158]

Had 64 slant 6 version, followed by a 68 hipo 273 4spd version, mf scooted, quite the stoplite screamer, took whole bunch of 20s from folks, find yourself lucky enough to be 1st in line at a red next to a muscle car other lane, hold up a 20, if other person did same, at next lite looser paid up,,, the slant 6 another one lots of people passed over but they could, and did beat a lot of v8 cars that tiny 4bbl had on the 64 with the headers really opened up the proformance

[@afitz6389]

Thats a nasty soundin 318...damn😮pure music, hit it!!!

[@fobbitoperator3620]

Gorgeous 'ole Cuda! For me, the cheap way to gain max stability in the fight against wheel-hop was HEAVY duty tow truck shocks, & a medium strength anti-sway bar. Yeah the ride is a bit spine crunching, but it bloody worked. That distinct starter sound, & BIG cam idle is relaxation music for me! (I'll be in my bunk)

[@markmcmillan443]

Good looking car sir !!! Love the 318s as well. I own two of them and have been throwing the idea around about building a 318 stroker but know information has been found yet. great set up !!

[@drtb69]

Love this car !! Nice work on your build and customizing.!! Whats she run time wise ? 0-60 quarter mile , top speed?

[@DanITGuy]

DUDE! WICKED COOL BARRACUDA!! Sounds super healthy!! Hotta Love a Built 318!! Set your caltracs to bring the cars center of gravity back a little to give you a little more squat and less wheel spin but overall Very cool and fairly smooth transition with no wheel hop = Bad Ass Fun!!

[@Yungsoofly45]

Man I love what you did to your 318 dude

[@ryanmoore7127]

my favorite mopar right there and your example looks great. the 318 was one of the only good engines mopar ever built in my (and many others) opinion.

[@1982MCI]

I had a 66 and a 67 barracuda brother, I love those things!! What a beautiful car man!! What state are you in? You’ve gotta be on the same eastern side of the country as I am with those tobacco fields you found in Mexico, lol

[@williamstamper442]

Looks like Indiana to me but definitely could be wrong!

[@williamstamper442]

Have to add this... My family is all from Kentucky, both ends of the state. A tobacco base is a very big deal to small farmers everywhere in the midwest. They guard their crop like the cartel, especially when it's cutting time and going to the barn to hang. When dry and headed to the market every family member is on board for that $120k paycheck for the annual usual tobacco base on a small farm. Split it up and live for another year.

[@1982MCI]

@@williamstamper442 I grew up in Ohio and one of my first jobs in school was planting, hoeing, cutting, spearing, and hanging tobacco in the barns. It’s a job that nobody will ever again know how to do unfortunately. It’s all done by machine now. We are the last of a long line of manual labor field workers brother

[@livinit73]

That 318 looks like fun to drive

[@Ridendrty]

Your small block sounds fantastic. Horse power to weight ratio gotta be pretty strong too.

[@stovepipe9er]

That sounds beautiful. I’d love to spin my 440 at 7700 but I don’t think it would like it lol!

[@COBHC8890]

I love a big block!! But the 318 and 340 are my favorite Mopar engines!!!!

[@RT69hemicharger]

Just Badd Ass! Never heard a 318 mean so much business!

[@Kenny_Mars]

I owned a 67 fastback, show car turned beefy driver. 340, black, etc. I loved that car.

[@jsbelljr83]

DAMN that 318 sounds salty as heck 👍👍

[@Firion13]

It's bored and stroked to over 400 inches

[@wingwalker7212]

Dang, N. Carolina to Mexico and back in the same day just to do some burnouts - that Cuda IS fast!

[@truthbetold3931]

Is this a stock block 318?, if so, I don’t see how it can hit or survive 7700 rpm without some serious and expensive engine mods. I had a few 318’s mildly hopped up that barely made it to 5800 rpm. Those old fast back Barracuda/Cuda are the best looking A body Plymouth ever made. Kudos to your Cuda.

[@garysgarage9827]

Yes it’s a stock block, it only has main studs

[@darrenjohnson3221]

Nice car sounds good but not 7700 rpm good. I've drag raced alot of small block Mopars in the past with W2 heads on a stock block 6800 rpm is about the best shift point with a big solid roller cam and aluminum rods. Stock blocks will not hold up to 7700 rpm shift points plus a seriously doubt you have enough cylinder head to be turning 7700 rpm. That would require a W7 W8 or W9 cylinder head which would blow the bottom end of a stock 318 block to pieces. Normally the number 6 cylinder will go on the stock blocks for some reason not sure why. Nice car but I don't buy the 7700 rpm shift point doesn't even sound like it's even close to that in the video.

[@anthonyreznik8883]

@@garysgarage9827 I call BS!

[@karlweber416]

Had a 74 Dodge Dart Sport!! 318 2 barrel , factory headers, his and her shifter!! Had 60s on back, polish slotted Keystone mags!!! Regular tires and blk rims in front with baby moon Mopar!! Sleeper!!!

[@milliondollar2981]

Now I know,,who has been leaving those damm 300ft black tire rubber marks💥 in front of my moms house!!

[@jessiehughes9432]

All that power,won't pass a gas station thou! 🤣 Nice old car.👍🏼

[@crashnbl1]

Shes right...we should use up all the oil so the younger people will definitely transition to green crap, imean, energy...dang autocorrect

[@rjminar1980]

Chrysler could have promoted a four barrel 318 for the Trans-Am series. That would have been pretty cool. But instead they gave us the mighty 340. Which, as we know is essentially an LA 318 block with a larger bore. I've built two 318 blocks to over 450bhp for street use over the years, and it's really not that difficult. With the right compression (just under 10/1) and a decent flowing stock top end and can, you WILL make power! How much is up to you and your wallet. I didn't see it first hand, so take it for what it is, but I knew a guy in the late 90’s who claimed 850hp out of a N/A, forged bottom, and girdle’d 318. I saw the block. It was from ‘70. This was a long time ago, but I’ve heard just before covid that this engine was still around. I don't know who owns it now. If anyone knows of a big power NA 318 at the track is love to hear about it.

[@zanemcfarlane6087]

318 is a awesome engine had a valiant pacer with one in the 80s nice ride

[@DavidMiller-gu1cn]

Love that sound,had a 68 Cuda with 5.38 833 slick shifted 4 speed lighten 2900 with 340 606 flat tappet, a 50 pound flywheel we ran it at 8500 all the time, I copied a guy's engine build in hot rod from the late 70s he ran 1070 with tunnel ram only ran 1107 in about 1980 love the car

[@96Dak318]

Does one pull and its right into a gas station. Sounds about right lol

[@danielbrealey2924]

@1:15 - That's pretty good, right there. Lifted just enough to take the load off the gears. Haven't watched the rest yet, but that's what you want if your going to do this s a lot. No lift shifts are for 'boxes with dog syncros

[@danielbrealey2924]

@3:13 - that's great, but it is very hard on the whole driveline- but that poor old trans is not going to like that long term with normal style syncros...

[@Mercmad]

I am pretty old so I learned to drive in cars and trucks with actual non synchro gears. In my teens I had a 39' Ford Std coupe with a 36 gearbox. That was the hot deal then because the straight cut first allowed a driver to change from 1st to 2nd without lifting ,known then as a bang shift. It also meant not using the clutch. Move on a few years and i was reading a book published in 1966 which described how the mopar drag team,the ramchargers, had modified a 833 four speed to be shifted without the clutch once rolling. It involved using a dremel to remove teeth from the Synchro cones .pretty much the same idea as the 1936 Ford V8 trans had. A real dog box, And I drove one once, has sliding gears with 'dogs' that lock into each other ,pretty vicious thing to drive ,but fast.

[@danielbrealey2924]

@@Mercmad Very cool, I'm a qualified mechanic of 23 years- I understand exactly what your saying. I didn't think about modifying factory synchro's! Very good, I can picture exactly what you mean... A '39 Ford, I bet you wish you still had it- sounds very cool

[@JerseyFrank007]

Cool build, man. What cr you running in that 318? Sounds pretty darn snappy.

[@wipatriot510]

Barracudas are a lot like Mavericks, rarely seen, but when seen, usually very nice, and your is no exception, VERY nice example of a Barracuda...

[@tangledline]

Keep the flame going!....Chevy, Ford, Chrysler...All of us need to save our old rods before the Gubment deems them illegal.

[@noaht5191]

Is that an LA or a Poly? I skipped through the video a bit, loading my tanker and cant hear a lot of talking.

[@francfurian8215]

Killer soundtrack👌🏻

[@JamesSilcox-if9ke]

Ain't nothing like owning an "old" vehicle. It's got a soul that the newer stuff never will.

[@Potriesgarage]

This thing sounds killer!

[@JacksoNR26]

Fo r a small block mopar. Which motor 273 318 340 or 360 is best to build for parts availability and cost. I can't find a lot of info on which is easiest to find parts and build a solid high preformance v8. For like 8,000 dollars

[@vincentenk4449]

Damned nasty sounding "318"! What else have you done to it? Dig the stick shift!

[@johnhughes7094]

sounds evil. Cant wait to get my 67 on the road with my 392 firepower hemi

[@ronniebowling1485]

That ole 318 is impressive, modified I'm sure , but impressive regardless. Gotta love those Mopars.

[@shanemitchell477]

My 72' cuda 340 would also do 7700 rpm, then it broke of the end of an exhaust valve and threw it through a piston, then I rebuilt it, then a girl floored it, lost control, ran into a concrete lightpost with me in it doing about 45mph, the whole thing just twisted up like a tin can.

[@williamstamper442]

Letting girls drive always ends up in a good car turned scrap. Ask me how I know! However with that said, I still support my own 17 year old daughter and my current girl too, if either wants to go drag racing because I know a girl in the know can be deadly on the drag strip or street!

[@jamesstevens1703]

What are the cam specs? Sounds tasty

[@michaelmartinez1345]

What a beauty!!! Hopefully it has been prepared for heavy acceleration.... This thing is Serious!!!!

[@bdogjr7779]

BADASS🔊III[[[[Love the Liftoff hood◇¿.That must be pretty light compared to stock😎👍

[@michaelhoneycutt7138]

Pretty good to get 600hp on pump gas. On a 318. I like it. Sounds good!👍

[@perfectfan2006]

we had a 69 just like that 318 the motor and trans were solid the rear end always seemed a bit on the weak side wanted to put a dana never got around to it nice looking car he has

[@chrisholcombe137]

2:47 Added to eats its self too 🤔 Hammer time.

[@cammer68oliver2]

Man, nice car! And nice window sticker too! I’d love to line my 68 Mustang up with you! LOL

[@davebruton5731]

Growing , up in the 70's all we heard about was the sbc . Not Anymore. Fly that Flag Proudly ! Hopefully the motor lasts you a while !

[@twistofthethrottle]

Man, I love the sound of your car. Absolutely madness! Hopefully once I get things sorted out I can get my 318 to scream like that. Until then, I guess I’ll just rip around on my FTR 👌🏼

[@garysgarage9827]

Thanks! 318s are screamers

[@patrickwayne3701]

@@garysgarage9827 I just subbed because the car is just a different color than mine and you appear to have found out what I did, in 1984. That a well thought out and properly prepared 318 can make a guy grin so much it hurts. HURTS SOOO GOOD!!

[@austin_94gt18]

What transmission is in it? I'm really wanting to see if I can fit a manual trans in my 1994 dakota with a 318

[@garysgarage9827]

The stock A-833 4 speed

[@austin_94gt18]

@@garysgarage9827 do you think it would be practical in a dakota? Or is there a more modern option?

[@garysgarage9827]

@@austin_94gt18 if you want practicality I would stick with the 5 speed that you could get in those trucks

[@patrickwayne3701]

@@austin_94gt18 that would be the NV3500 5spd like the one in my 97 shortbed. Grins and giggles everwhere.

[@BNforever2009]

Some serious mods to that 318 4bbl. Never knew on a goats nose you could build a 318 like that!

[@steampunk896]

What clutch and transmission is in the car?

[@garysgarage9827]

Stock a833 and a McLeod twin disc clutch

[@pascalgiou6869]

Where can I find good high performance parts for the 318? cylinder heads and crankshaft, piston rods for example? site addresses thank you to the mopar community.

[@jeffscott8323]

Love them 67 thru 69 Baracudas.

[@littlevman2997]

Adjustable pinion snubbers work gret for eliminating wheel hop

[@thegasman2007]

Sounds great, You running open headers?

[@richardsmith-qy6vl]

That car sounds good for a 318

[@firebrand07]

What crank and rods are you using here?

[@2HacksGarage]

Love this car man

[@5.9manualzj]

shit yeah. i put an nv3500 behind the little 5.9 in my jeep, and even just stock, its fun as hell to drive, and pretty fast for a brick in the wind. i cant even imagine how fun this thing is to drive.

[@oldscoolcooldiecast1879]

Im a Chevy guy but like dodges and was always told 318s was reliable but not worth building seems I've bin lied to lol

[@kskip4242]

But but the 318 isn't a performance motor didn't you know that? I don't know how many times over the years I heard guys say that. Nice rig bro.

[@bertflores6377]

Nice Barracuda. Im 58 now. I had a 67 Barracuda when I was 19.

[@smilsmff]

yeah , we used to say My cars so fast it will pass everything but the Gas Pumps, BTW your car makes all the power at 7,000 r.p.m. shifting?, this is a nice video for the track too

[@omcara1]

LOL I was thinking the same thing when he pulled up to the pumps!

[@michaelwhite8493]

My grandad used to say all the time: "she'll pass everything but a gas station" lol

[@markremillard5135]

Love the car love the 340s and the hemis my first car was a 68 Fastback got it back in the early 70s

[@troyhiett1885]

Thats one bad ass 318

[@finestoffreedom3170]

Does this pass emissions?

[@McNabbula]

What kind of power did it make?

[@will7its]

WoW Mexico looks a lot like Canada.....🐻

[@MINITMANRADIONETWORK]

First stop for gas,priceless.

[@arlequin241]

Hits the gas pedal, immediately pulls into gas station afterwards

[@rxwhat33]

Not a fan of American cars but I have to say that it does sound really nice.

[@ronaldhuell3177]

Didn't know what i had in my youth. That 318 is serious

[@mr.whitefolks7004]

Sounds awesome 👍🇺🇸🇺🇸🇺🇸

[@arronlove3288]

I have a 318 In my 1968 dodge polara the car cuts off when I make a sharp turn and it idles funny do you know what the problem could be?

[@iseeconspiracies9579]

Look for holes in your fuel line. You could be sucking in air. Look for the fuel line getting pinched when you turn. And look at the float bowls in the carb

[@magneticpulseengine3605]

sounds like float level is to high some carbs will spill fuel when cornering and flood the engine

[@patrickwayne3701]

Arron Love, float level is likely culprit, but DO check your entire fuel line,,, 68 was a LONG time ago and rust never sleeps....

[@raynicolaas7679]

It could be an electrical problem, Make sure your battery is grounded to engine and to the frame/body. Some electrical ignition components are grounded to body and some to the engine. If battery isn't grounded to both you can have potential ignition problems at times. One way to tell if it's electrical spark problem is by hooking up a timing lite to the battery or power source and hook trigger lead to coil wire instead of number one wire, put a rubber band or tape the trigger on, bring timing light in the car with you and go for a drive. When the problem occurs see if you lost the flashing light during the faulty moment. If so you have an electrical problem.

[@rebeccajohnson1407]

it,s a 4 inch crankshaft so its still a 318 ?

[@shawnst.martin7526]

im 50 yrs old been working on mopar for i dont know how long butt ill tell u one thing the 318 always have a week bottom end

[@1965l88]

Guess 7700 rpm wasn't such a good thing after all.... kzbin.info/www/bejne/boHLYoxrrJ2gqLs

[@boxer71c55]

What cam are you running?

[@romanduque6263]

That 318 sounds wicked

[@timshop2700]

You gotta save every drop of fuel, man!

[@garysgarage9827]

I compensate for all of the hybrid vehicles

[@StevenReaves-d7g]

I love Mopars ❤❤❤

[@jacobjarvis2545]

318 sounds good what gears you running

[@garysgarage9827]

4.10s

[@aaronstandingbear]

If your trying to see what your tires are doing thats one thing but for us vidfreeks put the camera so we can see the hood and where the hell you are going. Thanks

[@mnoble2288]

Straight to the pumps🤣

[@torredduster]

"You boys like M E X I C O ? ? ? "😂😂

[@JustMoparJoe]

Sweet car!

[@tinezilla]

That Mopar sounds tough dude!

[@69NOMAN69]

lots of racing in mexico these days, lol!!!!

[@StevenReaves-d7g]

They stole my 85 Dodge Ram 318 while incarcerated 😢😢😢😢

[@richardturk7162]

Must be really rich look at that house and fancy long driveway.