Shimano Release Huge Motor Update!

[@RobRidesEMTB]

Sadly its only the EP801 that gets the update (not the older EP8 / E8000). Not sure if there's technical limitations to the EP8 (the new EP801 has some hardware changes that allow 100 extra watts, and Autoshift with their new Di2 electronic shifting). Still its a solid update and good to see Shimano progress their current EP801 motor.

[@FloppyWaffle]

That's a disappointment, new to the ebikes. Just got a new Orbea Rise H10 6 months ago and it's a bit frustrating to see an update like this not available for my 6 month old bike but that's the way it goes I guess. I won't be running out to upgrade anytime soon unless the Pinion bikes come to Canada soon.

[@MTBover40TV]

What´s with the new EP8 RS (like in the new Orbea Rise)?

[@RubenJFernandes]

Can you tell what is the software version, i made a update today on my ep801

[@piotrekpaul]

Do you know if it will be available for EP6 as well?

[@The.JZA.]

My first e-bike was a Commencal Meta Power SX Race. I did about 3,000km on it and then sold it for 2 main reasons. 1) I decided I don’t like ultra long/low/slack bikes. They handle like a bus. 2) The Shimano EP8 was a frustrating motor. It cuts out so easily if you pedal too fast e.g. imagine you are going down a hill and you know that the trail is about to start going up so you shift down a few gears in preparation for the climb. You pedal hard and fast, maybe 120+ rpm to try to maintain you speed but the motor just cuts out because it’s above the cutoff rpm for the motor so you quickly slow down and then when your cadence is below the cutoff rpm, the motor cuts back in but far too slowly so you have lost all of your momentum. It was a huge pain in the butt and when I demoed a Bosch Gen 4 I was blown away at how powerful and unrestrictive it felt. I sold the Commencal and bought a Mondraker Crafty R with Bosch Gen 4 and 2 years later I still absolutely love it. Fantastic all mountain/enduro bike that still handles like a trail bike when you’re on the twisties. Love it. It would take A LOT of convincing to get me to buy another Shimano motor. Also an aside, the Shimano motor stopped working one day. No obvious reason and the shop couldn’t work out why it stopped working so they replaced it. It was fine the day before and then just wouldn’t turn on the next day so reliability is questionable.

[@Trade2Invest-]

I think I'll save my money for the pinion gear drive.

[@mikenimmick3920]

Nothing for the EP8? That's just great Shimano...really NOT GREAT. Only sold hundreds of thousands of these motors and I have 3. This is why this spring I bought a Trek Rail with the Bosch motor. Do the fix for the EP8.

[@billcarboy]

Great news if you’ve got an EP801, not so good if you’re stuck with the old EP8 🤷‍♂️

[@sc6813]

Isn't it a bit odd how fast they abandoned the ep8 engine? Don't engines usually have a much longer cycles in between the old and the new?

[@Un1uM]

@@sc6813 It needed a recall. It's cheaper to just fix the errors, give it a new name and sell it like an upgrade.

[@G00glieS]

That’s the thing - ep8 is not that old…

[@gazbuck73]

Can the EP801 be loaded directly in place of the EP8. Ie. I’ve the heckler 9 (2023) EP8 and curious if both motors are the same size?

[@OneRound79]

@@gazbuck73 I believe it can but you have to replace everything including the cables, connectors and battery. So I've been lead to believe. Quite expensive probably. I have the same heckler btw.

[@giuseppetuveri1727]

Please extend the update to the EP8

[@sc6813]

Rob, the expectations are very low if you think that they could have released this as a new engine, just because of this update. These bikes are big investments, how can we normalize them coming up with a new engine every year or two, just because of some updates? What they did to the EP8, and how fast they abandoned it, should not be accepted as the norm.

[@RobRidesEMTB]

Bosch released the Race motor as a new engine which is very similar but has the Race Mode (technically a software update). I also agree with you on new engines and standards, which is why I made this video: We Have A Huge Problem With Ebikes.... kzbin.info/www/bejne/hn-YYWh7l9yKipI

[@sc6813]

​@@RobRidesEMTB Haven't seen it before, but very good video, Rob. I'm not following all the moves and updates in the eMTB world very closely, but after updating myself a bit on the situation now, it's very disappointing that the bike I bought only one year and a half ago, with an EP8, for a lot of money, is already being left behind. Also who knows for how long we'll have spare parts, if things are so incompatible from one generation to the next.

[@TheAlbertocasanova]

Os generan ansiedad siempre por algo...tranquilos

[@stuka78]

@@RobRidesEMTB also cargo spec motor, only sw change

[@josephgarey7055]

I love my Cannondale Moterra SL. Now I love it even more!!! Great update to improve an already kick ass bike!

[@NicRowManSir]

The extra boost is one thing, but it’s kinda odd they didn’t update the overrun feature to the ep6 as well.

[@realmcerono]

😇 I am still very happy with my 5 year old E8000.

[@bmallory]

I'm crying with my E7000 Merida eOne sixty 😢 but hey, as long as there's enough juice to carry me to the top, I have no trouble descending!

[@Noisyminer-pg4pm]

My E8000 is ok.... The 2020 Norco vlt frame sits great with me.... To make an upgrade with newer Shimano EP801 system, given knowledge firstly determining Norco's frame spacing given the 801s motors directions to connect the cabling, room required to neatly close to then tighten up bolts...

[@monsterogi69]

agree

[@Rui_Caridade]

Seems to be a huge upgrade, I'm sorry that EP8 (DU-EP800) is not also updated with some of these features. EP8 (DU-EP800) is on my new Cannondale Moterra Neo 4 don't see it as an old motor.

[@jx5012]

This planned obsolescence is incredibly frustrating. My bike is less than a year old and has the ep8. 3-4 months after purchase the 801 was released. I have been told when the motor wears out, which it will and I accept that as part of ebike ownership, the 801 doesn’t fit ep8 mounting bolt pattern. So I have to throw my 8K bike away and buy a new one?

[@andrextr]

It has the same bolt pattern but different cables/plug and battery also needs to be from a new generation

[@jokermtb]

Never fall in love

[@jmo2752]

There are any number of e-bike motor refurbishment companies who can keep your EP8 motor running, just like there are any number of garages who can maintain older car engines even if the manufacturer releases a new model.

[@jokermtb]

@@jmo2752 only one in the usa, and it's affiliated with the one in the UK......grim offerings for repair in the USA

[@MrThepits]

Polini are leading the way with totally DIY serviceable motors, every part available to order from their website. Such a shame they are not widely available in the UK. I think it's only in Fulgur bikes at the moment.

[@andrewnixon2760]

Glad to hear about the updates. It would be be great if the battery consumption was percentage based and not bar based.

[@ryanlawrence8479]

Amazing news man thanks for the update.. Just updated my bike.. Unfortunately we will have to wait for the update to get pushed to the next version on the E-tube Cyclist Ap to be able to adjust. Currently the ap is 5.3.2. Features will be on the next version. Currently only available on the Pro ap that is for PC desktop only.. This is what the bike shop would use for repair and diagnostics.. Either way super cool, can't wait to test it out soon. Cheers

[@hindesite]

How is pfaffing around with the restricted speed a feature? In NZ we end up having to deal with this stupidity, even though we don't have any imposed speed restrictions for bikes.

[@streddaz]

The biggest thing that Shimano needs to address is to be able to rebuild the motors and give the fault code data to the motor service centres.

[@clintharper5509]

They are ruining their reputation by not doing this, I got the code come up e010 & the shop can't fix it & if I want it fixed I have to buy a new motor for £920 fitted, it disgust me that there's a fault that if found would probably cost less than a hundred pounds to fix but it's far more profitable for shimano to sell you a new motor, which makes the customer feel like there being coned, so for that reason I am now moving over to a bosch cx.

[@mik1037]

Finally full assist to the top speed, no more bs cut off 2 km/h!!

[@iffy_too4289]

Hey Shimano, how about this for the EP8. And how about you push for it too Rob.

[@Jim_Allocco]

....but is does the new update improve the battery life, which is not very good comapred to Bosch and Brose?

[@rawmancemtb]

I thought EP801 improved the range over EP8? Or well that was what Shimano said I haven't seen range test comparisons.

[@markh2k2]

I get about 17 mile from my shimano, 21 from my bosche, same size battery 😬

[@stuka78]

@@markh2k2 which 2 motors?

[@smtkelly]

Fail if it only applies to the EP801 no customer loyalty. My next bike will most likely be a Bosch although I really fancy a pinion its a bit too new.

[@ecosignals]

A LOT of parts too.

[@DavidSmith-wy5js]

Sounds like a great update & if it puts it on a par with the Bosch cx race motor which is only available on the most expensive bikes. Bosch will need to counter this to remain ahead. Whats the betting that bosch offer race motor software very soon. I not sure that your local bike shop will be keen to update your bike for free unless you bought it from them ,so expect £30 labour charge. Your local small bike retailer they cant work for free.

[@steffgofpv9681]

Too bad, that the older EP8 does not get this update

[@hindesite]

They should, this is just software.

[@justlikeyouful]

Listen to the end of the video... bring it to the dealer.

[@steffgofpv9681]

@@justlikeyouful please help us put here, he explicitly says only EP801

[@gophop]

it's nice that Shimano does overrun like my Brose from 2019.

[@renegade-master29]

I've just updated my shimano e6100 motor and comfort mode now feels like how sports mode used to feel but with even more kick and I've not actually tried it in sports mode yet as I didn't have my phone app on me but well-done shimano well-done 😄👌

[@ecosignals]

Everone here is talking about the EP801 update (and kinda complaining its not more widely compatible). I'm actually considering an EP6rs, and I gather the update would be fairly different for the 6x series. Could you please elaborate specifically what model you have, what you did, and what capabilities it brings (adjustable overrun etc). To have some of these features, with warranty support, could change the game!

[@alexbiketester]

The Overrun assist doesn't work! I Installed all the updates, did a quick spin. No noticeable difference. Power is more in Boost, yes, but you cant adjust overrun as the ETUBE app for phones. It doesn't give you the option! Only the app for shops "pro". So Shimano out of the gate too soon... Little point to this update if you don't put it immediately in the hands of the users. Rob you should have called this out in my opinion as a problem.... When is the cyclist app update available? More than version 5.3.2.... Should be immediately. Otherwise i have to go to the shimano shop tomorrow and find out from them how to make it work better as overrun in standard mode is not up to Bosch level in standard mode.

[@davemcbeard]

The consumer app will get an update in the Autumn according to the Pinkbike article about it

[@alexbiketester]

@@davemcbeard So all the other motor companies allow you to make small changes on the go. This update can only be modified in a shop to adjust the slider.... hmmm . Basically its not an update if you cant actually use it. I would suggest its been released prematurely in time for the new Bosch motor coming in july.

[@peymanstd]

@@alexbiketesterit will get released to masses in autumn (what I have read so far). It is a bit annoying and idk why they don’t release it to masses. Maybe they are trying to iron out possible issues and get feedback from those who get it updated through their Shimano dealers.

[@davemcbeard]

I agree entirely. It's a token gesture to appear competitive but in reality it's not very useful. I'm really glad I chose a bike with a Bosch motor, everything I read about Shimano motors made them sound like they were way behind the other manufacturers.

[@stuka78]

@@alexbiketester which new Bosch motor?

[@kunkakunkic774]

is this available for EP801 RS on Orbea Rise?

[@MosesCuzDog]

I'd like to know this too. And can we unlock the 85Nm with this update?

[@NatarajaAT85]

I asked around at Eurobike. Does not seem so for now. Orbea wants this as a sporty bike instead of a full power, to stand apart from the Wild.

[@ELi2190]

I’m looking for a eMTB for riding light trails and roads here in the NJ and NYC area but unfortunately the Shimanos assist up to only 20MPH meanwhile the Brose 2.2 from Specialize go up to 28MPH - was looking at a NORCO but the Shimano Motor is a major set back for me- would like to cruise in the low 20s MPH when on flat road

[@TonyFernandezjkdjedi]

But what does that do to the battery ? More aggressive sounds like it will drain the battery faster. Overun feature sounds cool.

[@sloanranger5]

Just need Bosch to release the extended overrun for the race motor to the standard CX motor

[@sham8723]

Motors need a bluetooth enabled heart rate mode. Boost reacts to put you in a target heart rate zone. Below zone... less boost... above zone, moar boost.

[@lucasmosching8983]

This is huge, the EP801 felt so bad in comparison to my Brose. Mostly due to the overrun

[@jamdwan]

Hopefully all the other brands can up the game with software updates to the actual motors. Unlike Giant who just keep uodating bluetooth and nothing else, then brick the bikes.

[@CarlosAntunesMTB]

What about the EP800 or EP8? Does it get the update as well?

[@Chris-sf2cp]

Did you watch the video?

[@Paulo-fr3xm]

Doesn't make much difference if it's in the bike shop broken down again. Should put a bit more effort in making them more reliable IMO. Yet another tuber not calling them out on it.

[@kevinburke1325]

That's what I am wondering. When are they going to make motors more reliable?

[@zacbaca6127]

What are the reliability issues with Shimano motors and being in the shop a lot?

[@kevinburke1325]

@zacbaca6127 in general emtb motors are unreliable because they are made out of plastic and melt easily.

[@rockmount181]

​@kevinburke1325 absolutely, Madison refused my last warranty claim as I'd "had enough replacement motors" laughable.

[@megane230f1]

​@@rockmount181and i bet you never got more than 4000 miles out any of the motors, e010 issues?

[@Vodafone16v]

Dont understand why we still have a mandated 20mph limit in our EMTBs... to run them in the MOUNTAIN. For me is one of the most obstrusive and awkward feelings of running a (restricted) EMTB. Riders in ACOUSTIC bikes can easily pedal upwards towards 30mph in fireroads or speed sections in the trails. Why bother restricting our EMTBs? If they are going to be used in the MOUNTAIN, let US run without restriction.

[@HiruS22]

If you're in the UK it's a 15.5mph limit!

[@Gerald-iz7mv]

Can EP801 RS Motor also support 85nm? I know its not officially sopported, but is there a way? Are the EP801 RS Motor and EP801 RS Gen.2 Motor just different in the software?

[@ark530abe]

Cool now give me a longer warranty. My ep801 motor broke at 1000 miles and tbh it scares me once my motor is out of warranty next year. Imo these motors should have a guarantee of say 5000 miles. Basically 3/5 years of coverage. My shimano v2 battery has a guarantee of 1000 hours before it starts to lose power. Meaning that my battery should last 10k miles why can’t this be the same for the motor.

[@jokermtb]

Can you imagine a motorcycle with a 1000 mile motor warranty?

[@lovelight9999]

My Bosch CX ran 3000 km before it started a sanding noise, the TQ 120 has now the third motor with 6000 km.

[@ark530abe]

@@jokermtbcouple months of riding after that goodluck lol these motor companies are jokes

[@ecosignals]

​@@lovelight9999 on your 3rd TQ replacement?? 😮

[@atlasbandit]

Who cares, we all want the Pinion.

[@chairmanfrau.6281]

Ha ha so right 😂

[@philwebb606]

Me personally I wouldn’t touch a bike with a shamino motor in it, I know riders with numerous motors replaced over 1/2 year period. The plus side is their customer service is good at replacing

[@predrag1]

Does this apply to the EP6

[@kentnilsson9757]

👍YES, interesting info, thanks Rob😊👏👏👏 Now Shimano is back in Race, when they have the Over Run/Extended Assist and of course more peek power. Slowly reducing the power after you stop pedaling is very nice. The only thing The havevto take care of is the display and put it in the frame like every other bike brands😂. Is this latest EP801 engine anything you can by and put in your for example Orber Rise RS🤔, it would be nice to get my hand on one motor like this😂

[@SolarizeYourLife]

So sounds like a software update, do they use torque sensors or cadence sensors???

[@Rui_Caridade]

Unfortunately we that have the Old "new" EP800 (8 months in my new bike) don't have access to s simple function as "assist carry over function", that would improve a lot the way to handle the EP800 in hard conditions terrain, but I'm the guilty one by trusting in Shimano and by a bicycle with EP800.

[@Unr3aLpm]

since pinion made the new gearbox motor I just see all other alternatives like a stoneage technology

[@stuka78]

@@Unr3aLpm 1) still to prove its reliability 2) still too expensive

[@joehoeper4648]

Can you turn off the over run? I think overrun makes the bike feel unnatural and hard to handle in tight tech. Hard pass on over run - I'm not racing, I'm riding - and over run is not needed or wanted in my book.

[@david029014]

I wonder if Yamaha will do this for Giant bikes?

[@guylevesque5401]

I have the Giant Reign E+ 2023 and you can adjust the "Assit" , "Torque" and "Launch" at every level. (Yamaha has 5). It gives me 400% assist and does have overrun. (If the front sprocket keeps going for a second after you stop pedalling is overrun). I think it is already updated as far as those issues. The only update for the sychdrive pro I would like is the automatic mode which lags a bit.

[@Magic_Vince]

+ more Power would be nice

[@esdrehtsich9289]

Maybe I am the only one who loved the natural feeling of no „overrun“ because it felt more like a non electric bike 🤷‍♂️

[@stuka78]

@@esdrehtsich9289 agree

[@ridethewind-ch]

Unfortunately it still doesn’t show power as bosch motors do. I’m pretty sure the motors have the sensors, therefore it’s just a matter of software. Big missed opportunity in my opinion.

[@emilysona]

How does the battery efficiency compare to the Bosch system? I have two e-bikes, one with a Bosch GEN 4 motor and one with a Shimano EP8 motor, and I consistently get more kilometers per watt with the Bosch system. I hope this update can somehow make the Shimano EP801 more efficient in terms of energy use. I have hesitated to buy a bike with an EP801 because of this.

[@stuka78]

@@emilysona the most efficient motor? Yamaha

[@bambaramba6509]

They need to do it for the EP8 as well, otherwise they are idiots. Plain and simple.

[@danysnf1467]

Is this update planed for old 2023 Rise Hydro too?

[@porroco]

Shimano dont even has ep801 motor in stock nor di2 to Supply on their bikes. I own a ep800 and now i see the new bikes with shimano ep801 carrying sram t type transmision instead of their own di2

[@juansantiago1441]

Is this update for all EP8 motors?

[@mq1506]

Nope 😢. Disappointing.

[@ark530abe]

Ep801

[@juansantiago1441]

@@mq1506 😢 shame on Shimano for not supporting owners with previous gen EP8. So happy with my Levo Carbon Comp Brose motor. I’m so happy with Specialized support. I have an EP8 bike and don’t ser myself purchasing another bike with Shimano motors.

[@JM-qp8bd]

I had my local shop instal this new update on my Canyon Spectral CF8 with the 801 motor. Today and I went for a ride and my motor skips every 3/4 pedal rotations. Feels like a chain skipping over and over. I bought my bike brand new from Canyon on July 9th. Today is July 13th. I have gone on 3 short rides and motor is already not working properly.

[@SlowTurboS]

So annoying. I updated my 2024 Spectral:On CF8 with the e-tube app then took it out for a ride only for it to be completely bricked. Nothing worked.

[@dan123collins]

Thanks for the update Rob. But it’s a hard no from me for any bike that uses a shinano motor. For a Japanese company they have a terrible practice of not selling any spare parts and you can’t get them repaired from anywhere. You can get spare parts for Yamaha, Bosch, brose so no excuse.

[@clintharper5509]

They are ruining their reputation by not doing this, I got the code come up e010 & the shop can't fix it & if I want it fixed I have to buy a new motor for £920 fitted, it disgust me that there's a fault that if found would probably cost less than a hundred pounds to fix but it's far more profitable for shimano to sell you a new motor, which makes the customer feel like there being coned, so for that reason I am now moving over to a bosch cx.

[@dan123collins]

@@clintharper5509 Sadly this is a common occurrence with shamans motors. They are treating them as disposable which is terrible for the environment and the end user who gets left with a large bill. I hope bike builders / frame manufacturers stop using them until they sort out this bad practice.

[@richardbedford5583]

Having had my EP8 RS motor replaced in my Rise once, 7 weeks out of warranty (luckily my LBS complained to supplier so it was replaced FOC as they initially wanted to charge me 100% replacement cost!), I doubt my next bike will have a Shimano motor. The motors that have failed the most often with all my riding buddies were all made by Shimano. Some have had 4+ motors replaced. Bosch and Brose (Specialized) not so much, by a long way! It's reliability and serviceability/repairability that will influence my next purchase when the time comes, and it won't be Shimano unless they really up their game in both aspects.

[@lutomson3496]

Meanwhile my old Shimano still does great..and the new DJI system is even better

[@x.trailcwb1546]

I made this update to 4.3 in the EP6 of my e-bike OGGI Potenza Sport. I had hope the limit was update to 45km/h (27.9 MPH). But no success. Some new OGGI Forza model are coming with a EP6 with this new velocity to 45. I do not know why my Potenza do not has this update.

[@x.trailcwb1546]

I'm from Brazil. We have different speed limits for e-bikes here. It is allowed 45km/h.

[@jokermtb]

More broken chains are part of the update too

[@muratcoskun5657]

any update maybe not this but another arrived for EP8000 as well?

[@daowner89]

I have the ep801 on a nukeproof and it feels like I'm riding in sand with drag

[@ukrytykrytyk8477]

Are they finally going to make spare parts available? Or when things go wrong you're in deep £££?

[@nahbrah12345]

One thing which means I will never buy another Shimano motor: E10 … every single person I know eventually gets this error code and it’s basically a death sentence for the motor.

[@clintharper5509]

They are ruining their reputation by not doing this, I got the code come up e010 & the shop can't fix it & if I want it fixed I have to buy a new motor for £920 fitted, it disgust me that there's a fault that if found would probably cost less than a hundred pounds to fix but it's far more profitable for shimano to sell you a new motor, which makes the customer feel like there being coned, so for that reason I am now moving over to a bosch cx.

[@ilidiofaria]

And my EP801 can’t switch automatically from range extender to internal battery when the RE turns less than 10% of charge 😢

[@RoryPowell-e8n]

Has the shimano Ep6 got any new updates 😊

[@artsteale3443]

I guess no updates for the E7000 motor?

[@joncam3045]

can i buy it by itself or do i have to buy a bike with it?

[@jx5012]

Does it apply to the Ep8 or 801 only?

[@andrextr]

801 only

[@steffgofpv9681]

Top Bad, I would like that feature set for my EP8

[@mutleyadamsracing2684]

What version is the update? I just updated to version and it updated the speed controller and motor.

[@TheWebstaff]

If only these were standard components so people had an upgrade path.

[@philipp5389]

Is this available for EP801 RS on Orbea Rise? Did i understand correctly, that this update cannot be performed via the app??

[@roddas26]

Have they got rid of the rattle?😁

[@briangong007]

Good job Shimano!

[@hindesite]

Wait - EP owners have to pay a dealer to do updates? That's insane.

[@JoeS97756]

Hmm firmware so I guess it doesn't fix the rattle on descents?

[@ADVRider78]

Does this work for the EP6? 2024

[@hobblyjig]

Wow! I’m surprised at the overwhelmingly negative response in the comments on this video. I for one am super stoked for this update. A lot of people weren’t even considering bikes unless they had the Bosch motor now there’s a much more level playing field when it comes to motor response. It’s probably easier for me to be positive as this directly improves the Ari Timp Peak that I ordered on Monday and anxiously await receiving.

[@stuka78]

None of these at the same level as Yamaha, in terms of motor response

[@rawmancemtb]

There's a lot of bitterness from the EP8 as people who bought it really got screwed as they bought the worst motor with least power and range. And the problem with this update is they've blundered the overrun. Backpedaling canceling the overrun means it's still inferior to what Bosch motor's have been for the past 3 years.

[@rawmancemtb]

@@stuka78 How does Yamaha compare? I've only ridden it indoors so can't really tell. But Yamaha had a slow start and then a strong pull in the middle from my experiment.

[@stuka78]

@@rawmancemtb it depends, which motor did you try?

[@rawmancemtb]

@@stuka78 Brose Specialized and Sram, Bosch, EP8, EP801, Powerplay.

[@tom-foil]

How do we get the update on Canyon On bikes?

[@TheNoseman1]

Interesting that you get rid of the motor and you get rid of the problem where there was none to begin with....

[@martincrosby2518]

Hi, my etube app is saying that there is a drive unit update available for my Orbea Rise M10. is this the one do you think?

[@FIGHTTHECABLE]

Bringing bike to a dealer for an update is like so 2000s for cars. The bloody things have bluetooth. Why not update over bluetooth?

[@beautifulbabyelise]

No kidding, especially since there are a lot of direct to consumer brands. There is no such thing as a YT dealer outside of CA.

[@clintharper5509]

More money 💰

[@numbernine7862]

in your slo-mo vids you can see the chainsuck at the chainring from the huge wear of a derailleur system. This wear (shimano itself in his dealer seminars claims a lifetime of 300km for a 12g chain) is the biggest reason to never buy a derailleur-driven ebike. Pinion goes the right way with its MGU.

[@jojoaspi7398]

Just did the firmware update for my 801. Now both firmware and phone app are up to date. How come I can't find the carry over and cut-off functions anywhere?

[@fuckinellitsraymo]

Because you never took it to your dealer

[@davemcbeard]

Shimano dragging their heals once again, they're almost providing everything Bosch already does. They're only doing this because their competitors are bulling them into it, if they had they're way it would be a new model, with a slightly different mounting and it wouldn't be out for another 18 months.

[@terenceprieto3964]

... wow. new color!

[@G00glieS]

No OTA updates in 2024? Rly?

[@mortus7591]

how it fare vs my bafang bbshd for climbing reparability ,overal ease of maintaince?

[@Teamcrapsheep]

Shimano still making £1000 disposable motors in 2024, no thanks

[@clintharper5509]

They are ruining their reputation by not doing this, I got the code come up e010 & the shop can't fix it & if I want it fixed I have to buy a new motor for £920 fitted, it disgust me that there's a fault that if found would probably cost less than a hundred pounds to fix but it's far more profitable for shimano to sell you a new motor, which makes the customer feel like there being coned, so for that reason I am now moving over to a bosch cx.

[@bobyeatts184]

can the 2022 EP8 motor receive the race firmware?

[@martinlewis1015]

I'll stick with my illegal Frey EX Befang

[@DarrenSmith-x6h]

How about the focus being on reliability, power is not a problem who gives a shit about more power ,wake up

[@mray8519]

Not a lot of love for Shimano in the comments. 🤔

[@edilbertoa]

Hi! I was wondering if you have ever been able to unlock a Shimano EP801 motor with an E299 error code? I am having such a hard time to find someone who can fix it from being on a safe mode. Can you or anyone help?

[@meho1010]

Does anyone know if you can replace Ep8 with the EP801?

[@cleggycyclist]

you can yes but you also need to replace screen controller, wiring etc so quite expensive

[@alanhawkins7591]

Battery and battery connector wiring is different so you have to change that

[@fuckinellitsraymo]

No, the mounts are different.

[@fuckinellitsraymo]

​@@cleggycyclistNo you cant, the motor mounting is different

[@Juraj_H.]

I went with Bosch because of reliability and service support. So even though this is nice, it's not solving my real issues with Shimano motor

[@MYMOUNTAIN_122]

As an owner of two emtb's, Bosch CX , and fazua ride 60, would be nice if Bosch hadn't just forgotten about the CX performance motor, there hasn't been any updates on the non smart system for a while, I guess all they care about is you upgrading to newer tech every 6 months, very disappointing Bosch.

[@deanrwilson]

Shimano playing catch up. It's just not the power that's the issue it's been the perceived reliability, If you follow the Shimano owners page you'll hear about contasnt failures. The EP801 now promises the world so let's see what happens

[@alinthemind]

DJI just set the new e-bike standard.

[@Mechaniclemaniac]

Rob wtf are you refering to regarding "auto shift" ? You talking about a motor feature or a derailer?

[@RobRidesEMTB]

Both. Shimano have a new electronic mech that pairs with this EP801 motor that enables automatic shifting.

[@AndyHunt79]

With a ep801 motor you need the electric di2 shifter, di2 Derailleur, and linkglide 11 speed to get auto shifting. I have it on my Ari Temp Peak. It took some time to dial in the settings with all the options, but it now works incredibly well. Excited to see how this update improves things further. I still manually shift about 1/5 of the time while in auto shift mode, but autoshift with an occasional manual shift to finetune the ride experience works out well for me.

[@SlowTurboS]

This firmware update bricked my 2024 Canyon Spectral:On after installing over the air via e-tube. No solutions. Anybody else?

[@perspectivedetective2703]

Shimano endorsement.