A few weeks ago, I converted my bike to drop handlebars and used your videos for everything. Installing the R7020 levers, the hydraulic brake bleed, the shift cables, etc. Your videos are an incredible resource. Thank you so much for sharing your knowledge. All the effort you put into these videos, showing different vantage points and being really specific about everything is so appreciated. You have no idea how many videos I watched regarding the insertion of the shift cable where they didn't show how it went in like you did in this video. Mine was getting stuck on the shifter body plastic housing, and I thought that was good enough, but it wouldn't shift. Your videos saved me from hours of pain. Thanks again!
@theunabiker41333 жыл бұрын
I’ve watched a number of your how to videos, and want to say thank you bc you’ve been quite helpful. Very clear presentations, and easy to follow what’s been demonstrated. I just finished a bike build, and referred to your channel several times. Thanks!
@XBKLYN Жыл бұрын
Im a bit late to the party on this one but thank you for the guidance... I've happened across a new in box Ultegra groupset and this vid is key to my installation....I had no idea what those SP41 cable ends were for so its great that you included that detail.
@chansimon-v7d2 ай бұрын
Thanks , very details and useful.I am from Hong Kong.
@dickieblench5001 Жыл бұрын
Brilliant presentation
@donatelloslappafello11089 ай бұрын
Thank you! You saved me a lot of trouble. I appreciate the instructions
@hampusdahl35723 жыл бұрын
What an amzing channel! FANTASTIC!! THANK YOU!
@g.fortin32282 ай бұрын
Very helpful.. great! Thank you.
@FatherGorgony Жыл бұрын
Thanks, it is for right hand, but what about left, for frunt derailleur?
@rjacko74783 жыл бұрын
Keep them coming ...
@ThePhilvantwo3 жыл бұрын
Great video!
@dpugh3910 ай бұрын
Can you use these lever with cable activated disc brakes or are they just rim? Thank you
@FreeToCycle10 ай бұрын
You can you use them with cable disc brakes!
@davesamsung45453 жыл бұрын
Great advice. Do you know if the Ultegra R8000 shifters are compatible with Dura Ace 9000 calipers, front mech and chainset? Thanks.
@FreeToCycle3 жыл бұрын
Yes they are fully compatible!
@davesamsung45453 жыл бұрын
@@FreeToCycle Thank you so much.
@custombender86673 жыл бұрын
Good afternoon, sorry for the machine translation. I have a problem, the lids of the hydra reservoir are leaking around the perimeter of the r8020 and there is no brake power, the gum itself is intact, how to solve this problem ??? THANK YOU
@FreeToCycle3 жыл бұрын
kzbin.info/www/bejne/gnqciXiAeq6psKs
@dh73142 жыл бұрын
Great video. However my shifting is very hard (left shifter, front derailleur) it takes all my strength to shift it. I’ve replaced the cable twice and I’m totally baffled. Any tips? It’s fully integrated including handlebars.
@FreeToCycle2 жыл бұрын
Either the outer cable needs replacing or the front derailleur needs lubricating! Remove the chain and manually move the derailleur in and out by hand whilst lubricating all the pivot points!
@dh73142 жыл бұрын
@@FreeToCycle thanks for replying. I spent hours on it today, removed and cleaned it, lubed it and no improvement. I may just replace it, compared to my other bike (6800 groupset) the spring is so much stiffer. I’m worried I’ll break the shifter it’s so stiff
@FreeToCycle2 жыл бұрын
David it should'nt be that stiff are you sure the cable is runnig free inside the frame?
@dh73142 жыл бұрын
@@FreeToCycle it has a sheath internally, which hasn’t been changed, the cable feeds fine and only meets resistance at the bottom bracket area but once the cable emerges it seems to move in and out by the shifter ok. Only once connected to the derailleur it struggles to pull it.
@ytb37482 жыл бұрын
Does anyone know if the shifters come with the shift and brake cable included?