Signs of a BAD Gyro | Shendrones Siccario

Taking a look at what BAD gyro data looks like and how it can be like pushing a rope up a hill to tune against it. We have a tenancy to try to cover it up with firmware features, but that's just NOT a great approach. My best advice is to tackle it head on and work to fix the issue before moving forward any further.
===============
Presets and Tuning Training Content: theuavtech.com
------------------------------
Want to support me?
Sign up to be a Patreon!: / uavtech
or buy a beer: paypal.me/pools/c/881V76Fj1n
Use this Amazon Affiliate Link (paid link): amzn.to/36okaf7
Use to purchase ANY products [hobby gear, household items, etc.]
As an Amazon Associate, I earn from qualifying purchases.
Sound/Music provider -- Epidemic Sound
Check them out at: www.epidemicsound.com/referra...
----- NEED HELP?!? ------
FREE!:
Betaflight BlackBox Log Review Group: / 291745494678694
UAV Tech Discord: discordapp.com/invite/rCCzgeT
I'm available on the PATREON CHANNEL. To access, sign up to Patreon.
As A SERVICE:
UAV Tech Tuning Services: theuavtech.com/services/
Facebook: UAVTech1
Have a product for review?:
Mark Spatz - UAV Tech
117 S. State Street
Box 504
Clarks Summit, PA 18411
Please contact me for coordination prior to shipping.

[@blackmennewstyle]

Such an underrated FPV channel <3

[@MrSmithersFPV]

your literally the best resource with Jb next in line for fpv information and I've been doing this since 2016! Thank you so much for the hard work honestly, much appreciated from us tuning nerds!

[@TrentTationnaiseXization]

Was watching Nurk fly this guy, cool to see ya doing a tune on it. Looks like a solid setup.

[@princesfpvdrones]

Thanks for sharing your findings, you the man! Moral of the story always address mechanical or electrical issues first.

[@MCsCreations]

Pretty interesting process, Mark! 😃

[@sunsetpark_fpv]

The slo-mo take off was SICK.......thank you SO MUCH for showing the BB data on screen - to see it over the footage is a BIG HELP!

[@Kapharnaum92]

Thank you for your videos.

[@HolaACchillin]

I really like those motors, I have tried all kv in that size except 1900. So I went and I picked up 8 motors, building rn, watching your cool af video! The slow mo take off is cool!

[@h2o-fpv623]

great video thank u

[@jamesparkerfpv435]

Thank you

[@samuelepaganoni9741]

Thanks for sharing! I have a quad with yaw slow oscillation on a specific throttle value. I tried changing pids and filters and it gets a bit better but it's still there. Tightening or loosening the fc screws it shift the throttle position where it oscillates (changes frequency). It seems a mechanical problem but only on the yaw axis. Unfortunately I don't have the blackbox to investigate. Could be a faulty gyro? Thank you.

[@Gespar]

How would you rate the tune and that drone performance after the FC change? Did you get rid of the wobbles caused by wind or is the heavy mass just problem when there is external forces ?

[@FPVish]

thats incredible how you understand those lines..

[@marc_frank]

can someone implement a fft filter in betaflight?

[@momentum3825]

Any recommendations about esc placements? Should i connect both escs to 1 xt60 with 2 capacitors?

[@Gespar]

any way you would like to make part2 of tuning this beast, if I send you the log files for this same setup with settings from where you left off?

[@Maorifpv]

nowadays it is very common to receive flight controllers with gyro defects. And it is very difficult to prove what is going on to receive the refund. My last t-motor f7 HD came with faulty gyro. Not long ago I bought a dalrc f7 that also came with faulty gyro. Before that there was an Airbot Omnibus f4 that also came with a defect in the gyro. I am very careful in the assembly of the fc's and I can see immediately in the first take off when the gyro is not good. The type of vibration / defect is very obvious. Buying a flight controller today is Russian roulette, at least in my case.

[@kwadkrazy6078]

Hey Mark, I've got an old drone that I've been working on tuning, but for some reason, after a crash, the tune is wrecked. There are huge high throttle oscillations, propwash handling is terrible, and its super inefficient. And then after a couple days of flying it, it clicks back to its old way of flying, and is normal. I'm not changing any settings before or after the occurrence, and am by no means a noob, but cant figure out what on earth it could be. Any input would help immeasurably

[@DiogoFilipeR]

Put a servo in that big camera to control the tilt of it in middle flight! You can place a second fpv camera on top of it to be able to see what that camera is seeing too. A build with 3 cameras xD

[@pablofpv]

I was definitely getting a “Terminator” vibe from this video?