Simple Stool DIY I Only Glue! 4K

How to build a simple stool. DIY step by step build of a very easy and sturdy step stool or bath stool. Japanese style. Only glue, no nails, no screws, and plenty strong! A woodworking furniture project that creates this very useful and practical stool for your home. I do use a tablesaw to make the dados, and a chisel to flatten the grooves. I used pieces of a reclaimed Oak Tabletop but 2 x 10 Pine works just as well, just not quite as strong. The finish is Walnut Danish Oil.
Don’t forget to Like & Subscribe! 😊
Thanks for Watching! DIY Foto Works
----------------------
Amazon Affiliate Links:
Products and Tools appearing in this video:
DEWALT 20V MAX Hand Planer: amzn.to/3oK2jg2
Dewalt Jobsite Saw (DWE7491RS) amzn.to/3OOLUSd
DEWALT 20V MAX* Cordless Drill: amzn.to/44nTqbm
DEWALT 20V MAX XR Impact Driver: amzn.to/3NmWX2s
DEWALT 20V MAX Orbital Sander (DCW210B) amzn.to/447P1JJ
WORX Pegasus Folding Work Table: amzn.to/43McXSb
Pony Jorgensen Medium Duty Woodworker's Vise: amzn.to/3MSEefd
BESSEY K Body REVO Clamp Kit amzn.to/46t4aXO
FASTCAP GLU-BOT GLUE BOTTLE: amzn.to/3OUJWjl
The Complete Silicone Glue-UP Kit:amzn.to/3CC3QIB
Swanson Bevel Gauge: amzn.to/3WRI7Wc
FastCap Measuring Tape: amzn.to/46qIfjO
GVS P100 Respirator:amzn.to/3CFbou9
Pyramex I-Force Slim Safety Goggles:amzn.to/45YOhrw
3M Peltor X3A Ear Muffs: amzn.to/42wFhHl
POWERTEC Safety Push Blocks: amzn.to/3NP79Cu
Watco Black Walnut Danish Oil Finish: amzn.to/3ramrIY
----------------------
Build/Filmmaker/Editor: Ken Gillespie
Music: Epidemic Sound
***I use Epidemic Sound for all my music & audio Effects:
They have a massive, top-tier music catalogue:
Click below for your free trial!
share.epidemic...
Disclaimer: This video has Affiliate Links, I receive a small commission when
purchasing through the Link. Your price remains the same.
Thanks for supporting my Channel!
------------------------------------------------------------------
Cheers! DIY Foto Works

[@ritad673]

This is the perfect stool to sit on while taking off your boots and then storing the boots underneath. So many other stools have bottom rails that would be in the way. I love this. Clean lines. Gorgeous.

[@DIYFotoWorks]

Thanks so much, and thanks for commenting

[@Wood677]

This stool is perfection, well done!

[@DIYFotoWorks]

Thanks & Thanks for Watching!

[@clutteredchicagogarage2720]

At 4:33, you should make those cuts with a crosscut sled or a miter gauge. Can you use 2 push blocks to push a wide board through a table saw? Yes. Is it safe and sensible to do it that way? No! If you twist the board a tiny bit as you push it through with 2 push blocks, it can twist and kick back very quickly. You can easily get hurt from the kickback (more likely) or lose your concentration and end up pushing one hand into the blade (less likely but possible). Even if you don't get hurt from the kickback, it's easy to accidentally ruin your dados if you twist the work even a little bit as you push it through. I love the simple design of this project, but you should never make cross cuts on a table saw without a miter gauge or a crosscut sled.

[@DIYFotoWorks]

Yes, a very good tip, tablesaw safety should never be ignored

[@erichuang1403]

good job

[@DIYFotoWorks]

Thank You 😊

[@legrandeileen4863]

Beautiful 🎉

[@DIYFotoWorks]

Thank you 😊

[@williamsoroka2527]

BRAVO USA

[@DIYFotoWorks]

Thank you

[@johnhubbard6262]

Very nice finished product, I am a bit heavier than you, I might add large dowels from the top as a decorative approach, but it's so clean looking as it is not sure. Thank you for sharing

[@DIYFotoWorks]

Thanks, Big Dowels thru the Top sounds good. Tough Choice 😊

[@bather7483]

Really neat build! Its got me brainstorming for my own bathstool project. I'm wondering if I could get away without using any glue - assuming glue is not good for wet areas. Maybe a similar but different joining technique!

[@DIYFotoWorks]

Thanks, you could use waterproof glue. I originally thought a big sliding dovetail would be interesting, but seemed a little much for my skills, and risky, since I had very little extra wood. Thanks for Watching! 😊

[@MegaPulpito]

Muy bonito y práctico

[@DIYFotoWorks]

Thanks so much!

[@neo_nawaratintarapanich6209]

Very good! I like this shape, not a block I mean. How you decide the height of stool? in relation to its width and height of you, for example.

[@DIYFotoWorks]

Thanks, the size was just arbitrary. The stool really only holds a towel or bath robe while we shower. But you can easily stand on it but it’s a little on the short side for sitting on. Thanks for watching!

[@BigmoRivera]

😂 Nicely Done 😉👍🏽🔨🪚📐

[@DIYFotoWorks]

Thanks so much, appreciate it!

[@carrangil]

Testing means either sitting on it or stepping onto it. Didn’t see any real weight on it to see if that method works.

[@DIYFotoWorks]

Testing implies testing for your specific requirements, those are mine, thanks for the comment. By the way it’s very strong.

[@FrtutmaDIYwood]

Nice Stool. which table saw do you use?

[@DIYFotoWorks]

Thanks, I use the Dewalt DWE7491 job site saw. Very happy with it, for a jobsite saw it is a good performer.

[@everettfrancois290]

How long are the legs

[@DIYFotoWorks]

15 1/2

[@Jorge1411]

Show...

[@DIYFotoWorks]

Thanks for Watching! 😊

[@frankruby8755]

What do one do to buy the tools

[@DIYFotoWorks]

Not sure what you mean?

[@frankruby8755]

its not a simple stool if you need all the power tools

[@DIYFotoWorks]

A tablesaw is not all the tools, pretty common in fact, and cutting 2 slots is pretty simple, I even managed doing it, but I do appreciate your input.

[@johnhubbard6262]

The table saw is just a time saver, you could easily do this with basic hand tools. @@frankruby8755

[@RonaldPlett]

This is not a diy

[@DIYFotoWorks]

To many it may be, but thanks for commenting

[@Slicer11221]

Why not

[@thomasschafer7268]

Sorry. Whats the point with the glue?

[@DIYFotoWorks]

The glue holds the stool together.