Skunk2 Pro Series Intake Manifold and Alpha 70mm TB for D15 / D16 Install Review And Before - After

#GreaseMonkeyMods #GreaseMonkeyRepairs
✓✓✓Thanks for watching! Please Like And Subscribe✓✓✓
MOD LIST:
Skunk2 Pro Series Intake Manifold
with a 70mm Throttle Body
amzn.to/2FIiqBg
Dual Bend Short Throw Shifter
amzn.to/2WAwSEO
Polyurethane Shifter Bushings
amzn.to/2JP5I7p
Black With Red Accent Shift Knob
amzn.to/2WcNa7s
HAmotoraports P28 Tuned with crome.
33 degrees of timing on E85 Fuel
DNA Motoring muffler
amzn.to/2MnXa9J
RPF1 Wheels 16x7
amzn.to/2VNIDTW
205/45r16 Tires
amzn.to/2M9CKB9
Carbon Fiber Intake
amzn.to/2K2j6Ed
K sport coil overs
Amazon front lip
amzn.to/2YGYCFc
Amazon rear lip
Contact Information:
Personal Facebook page
/ bo.leal.1
follow on Instagram pBm10lfhF8...
greasemonkeymod facebook
/ posts

[@YourUserNameSucksx10]

I miss my EJ d16z6, skunk2 Mani, DC 421, aem v2. The skunk 2 manifold was the best mod I liked. Even though I drive a turbo 98 eclipse beauty now. I will always have a place in my heart for my d16

[@jamessullivan4979]

Makes me nostalgic of my d16 with skunk2 manifold loved that deep sound when putting the throttle down 🔥

[@timm5970]

Pretty cool! Ill subscribe to see more of the build. You should make a video about tuning with crome. Setting afrs, adjusting ignition timing, etc. would love to see that

[@koolmone5564]

Thanks bro helped me a lot before thinking about buying it

[@MrRafa665]

i had the exact same problems installing my skunk2 intake on my y8 head. solved the exact same way lol

[@Isaac_cobo]

I was so happy to find this channel with the identical build as mine same color same everything damn

[@Havok1718]

Great content bro. For that nut issue you can replace the stud and nut with a Allen bolt.

[@Brazybo520]

I enjoy watching your channel bro! Learned a lot 🙏

[@BoBuilds]

Cool man! Glad you liked the vid, I'm no Honda expert my any means but I DIY with everything I can!

[@krisztianadrian8528]

I just ordered a skunk intake for my d15 blocj with d16 head ... Can't wait ti try

[@jimwinchester339]

I had issues with the runners being so long that we had to move the brake line junction down to make room for the IACV - which ended up very close to the firewall. Never did dyno test - but car seemed to cruise at high speeds (85-95) with less throttle (and hence actually better mileage) at these speeds.

[@yotatrd5.758]

D16's only build power with boost.... Vitara bottom end with 16#'s boost matched with a BrianCrower Stage 2 cam =430whp on E85 cost me just under 2grand total build. Nice civic though very clean build.

[@frias2287]

Nice bro🔥💯

[@IzzySk10]

Could you tune it to run regular high octane pump gas? The closest E85 pump is probably 30 minutes away

[@frias2287]

@@IzzySk10 🤝🤝💯

[@samhendren1171]

Wow only 2k. Got any videos and a complete parts list?

[@HerC-gj8ln]

You can get a single cam up to 200hp max end NA,he seems to know what he's doing. Some people just wanna have fun doing something bro. You don't have to point out how to do it a better way or xyz. Sometimes it's just about having fun.

[@ZT_Performance]

Lol i was just waiting to here the idle go to the moon with both those inlets open 😂

[@Jason_Voorhees.]

closest you can get to itbs without going itb... that is pretty much what that design is, i ran it on a b16 with hondata s300 tuned and it definitely helped make power

[@JorgeGonzalez-lk6yl]

Having magnetic trays help a lot stay organized

[@SleeperCalais]

I had the same coolant hose clearance issue on mine. It's a good manifold but I was really suprised they would've designed it that way. I also had to make a bracket to limit how far the TB opens. My TPS range was .4v to 4.9v. It's like the TB was opening more than 100%

[@mac3667]

Just use wd40 silicone lubricant and it slides right on

[@FaderSkate]

Sick ordering on amazon now but I had to watch a video to see if it first

[@barelybuilt1477]

Very helpful 🙏🏻

[@athaothao2880]

nice skunk2 pro intake manifold technology civic ok

[@BoBuilds]

Thanks!

[@geohudson2125]

@@BoBuilds sweet skunnk 2 inlet manifold swap for d-series 🤙🏼😎nice gain in torque & power 📉 can you run stock tb ?

[@roryjones485]

If I wasn't in the UK I'd buy that oem intake manifold they are like gold dust in the UK

[@bgboostedej1373]

I would look into delta cam..the 260 would be great for all motor and low boost..and easy to dial in with your experience level and I have first hand experience with delta over 5 years..and P29’s oh my lord..those r my go to eBay pistons...for all motor & boost 😎👍🤜..the only experience With cams I have is delta and bisimoto and pistons nippon racing and arias...but if u lookin into the delta 272....u do lose alil bottom end power that u can fill but pulls hella hard tell red line....but to each there own..good video..oh yea ur tuning info is getting better..feed the world brother

[@Nathan-gj8ch]

I love how ebay sells "P29s" when they all look like PM7 to me i got a set of them any way and milled the dome off for a flat top and less CR in a Y8

[@epicvedios6478]

Can i add cams to my automatic d16y7? With this intake manifold. headers. and intake?

[@mryang3644]

@@epicvedios6478 even with all that, u wont beat a stock 5sp civic 🤣.. go get a Manual , otherwise u just wasting money

[@MyLooneyBin]

great vid, I am thinking of getting a few bolt ons, and that intake is the most expensive, just trying to justify it, but I can't find anyone else that makes an intake manifold for the F22b engine ... new sub, I am gonna check out some more stuff!

[@edgardoestrada313]

How did you get rid of the air injection on top of the thermostat housing did you plug em ?

[@civicguy562]

I just installed mine today

[@leepalmer1075]

Don’t want to accidentally drop something down one of the injector Holes I usually plug all openings into engine with tissue paper

[@mayxiong1583]

Yeah your right about eg I gotta hit my back wall to make my fit otherwise when i shift it hit the back and make noise.

[@raeleenmandy6359]

I had the same problem , the reasons because the car runining rich = more power and the ECU tells the computer to injector more gas in the cylinder. But I wonder if it burn cleaner instead of unburn gases. I might be wrong

[@thehondalife2812]

Content is always amussing to watch . was going to say you should do a ostrich 2.0 install on ecu vid

[@BoBuilds]

Thanks!

[@camprandy]

just got my first vtec A few days ago. Already had header, exhaust, and cold air . Now im going to put this throttle body and manifold on and then an upgraded cam and springs. should net me 200hp. I hope. Gonna take a while. :)

[@79cobra13]

If it's a d16y8 then maybe 135 at the wheel 200 would be in the k or h range

[@iwantmoorcash4867]

Need to change pistons also

[@byronjones8246]

What did u do with the pcv valve line? Should I plug it up from under the intake manifold?

[@daniel25u]

Hey you have those hose clamp pliers? Hey can you install this for me

[@brandonmarcinkowski5216]

Looking good

[@user-po2ye9vu9p]

thanks

[@Dontcare826]

Great video

[@BoBuilds]

Thank you!

[@EduardoGarcia-iz2vs]

What kind of valve cover you got tryna get the same one love the carbon fiber

[@tatialo37]

That's what she said!!!

[@swiggynutmcgee2186]

What throttle cable bracket are you using? I cant use the one that came off my original manifold because its way too tall

[@Midnightrider773]

Just got another sub =)

[@camworks9448]

New to the honda game so probably a noob question i got a skunk 2 intake manifold for a d16z6 but i have a 94 ej1 with a d16y8 the manifold has a small crack was wondering if this would fit my motor and would i need anything extra?

[@zmecalis]

what did you do with the hose that goes into the manifold just above the injectors?

[@d16garrett43]

bro digging the channel more vids please got a 96 ek doing a build pretty soon on it thinking about making vids cause your channel

[@BoBuilds]

Thanks man! Always working on content. The car in this vid is getting boosted right now.

[@d16garrett43]

@@BoBuilds sweet brother definitely get a cool little install/time-lapse for future content id give it a like subbed to you and post notifications are on ill be waiting

[@angelgarcias7328]

Where got it h much you pay thank like it want put my liltle mored power lolll good jod bro

[@TkKalponi]

Yeah this gonna run lovely on my rsx with everything I’ve put in it … Are those official Enkei rims ? I just got the exact same on mines

[@matthewtawagon7908]

How were u able to put on the tps sensor onto the other manifold

[@stevoej8204]

Hey man what’s the part number for the intake manifold you bought ?? I bought one for my z6 and trying to buy a aem fuel rail for it but I read online that the z6 and y8 fuel rail have different mounting points

[@Spudstrodamus]

When's the turbo going on lol. Love the Honda content. Hopefully my car is registered and insured this weekend and can take it on its first drive In like 7 years

[@Spudstrodamus]

These motivate me

[@StuntCrew_Alex]

Same here

[@ferniem95]

So I can do the same thing with my y8 then? Even tho I have a z6 mani/throttle body/injectors/rail/ & regulator on my y8? In other words I can swap all that to the skunk2 to mani without no problem?

[@MultiDamian14]

how many horses does that multiple give???

[@boengel5342]

If you had aftermarket silicone hoses it would fit. They aren't as thick.

[@dannydequiroz4435]

Hi Bro, I am planning to use a YCP P29 Piston on a 95 octane fuel rating, will it run nicely? Or do I need to fill my tank with a higher octane rating? Thanks!

[@jerkdale23]

Will this work with the d15b8 manual.

[@gamex9288]

Where did you connect the evap seloid on intake?

[@kingjay3301]

I can put this on stock d16y8 just bolt on and that’s it no tune or nothing ?

[@alexrodriguez7325]

Why didn't you install the 2 hoses that you left on the windshield? because in the old Manifold has one in the middle.

[@felixvlopez3558]

hi .. I would like to know how you did it so that you would not be accelerated because I installed the manifuld in my sling D16y8 .. I would like to know that I have to remove ..Can somebody help

[@alienweed6396]

Will this IM give any gains without a tunable ecu

[@oclaothug69]

Does that intake pass smog check?

[@sivicsi93]

Bro a couple of questions; do u have to Chip or change te computer? an the injectors? hope u can answer !

[@elijahsouza8619]

Can I install this on a stock d16y8 ,

[@wackafloccaful]

Nice car

[@geofferyrowe384]

Song name when you started changing intake?

[@zodiactrip]

Nice video friend! You know if this fit on d16w motor?

[@Notoriousfc3s]

It says that for ek civics there is fuel filter and brake booster issues did you experience these ?

[@ericmcguire5469]

I was thinking before you even started it, I hope he plugged those 2 vacuum ports, but nope

[@AK-ky3ou]

Sick

[@skywatcher856]

Any suggestions for myD17A2vtec not sure if there is anything .like to get a cam that give me more mid range and a better clutch I have very little power in first and second . can't even get it to 5500rpm until 4th gear slow for VTEC.im wondering if I have trans problem or flywheel.

[@krautsalat2695]

What size is this Coupler and where did you buy it from?

[@downsouthrippin6482]

Where you get the iacv

[@warrenpurcell307]

Is there a way this could work on an automatic?

[@ST1L0KS]

I had to do the same with the wrench

[@zodiactrip]

Hello from Greece Friend!! Nice video!! I thinking buy the exactly the same for my car D16W7 motor. Its run with normal ECU?

[@tragicktragedyhaze8398]

All.long don't matter what matters is the port amd polish job that neither intake had start over

[@MikeKollin]

I want "Mo Powa!!" 🐹

[@justinsmith2282]

Would this work for a d17a1

[@NathanielRatthamone]

What kind of fuel rail did you use ??

[@ochooyta8989]

What headers you habe on?

[@Style_323]

I installed mine and my car bogs out once I give it gas and it smells super Rich of fuel any thoughts what it could be I tried adjusting the throttle but smells even more like fuel

[@piotrszymanski671]

Hey what are those alloys?

[@tundas808]

Drop ur vtec engagement to 4400 rpm and rev it to 8k it can handle i promise Itll always be in vtec when shifting Reved my D16y8 8k for years

[@jonskigonski4415]

Why didn't you put the hose on 1st then bolt it up ?

[@epicvedios6478]

Nice vedio bro! Is it worth buying? What's ur opinion?

[@strawmannhonda529]

Hi, i am curious to ask you a favor, i have a fresh built y7/z6 dimpled ported intake port/ ported polished exhaust ports , overbore, eagle rods, acl bearings, vitara pistons, t3 t4 turbo setup. skunk 66mm tb tb, rdx injectors, walbro 255, port matched everything , my issue is the low compression, im on hondata s300, i need a map that will get me running well enough to tune it from there, i am new at tuning and have it down for the most part but i am not experienced to know the changes that vitaras require to idle and run low load..any help. Share your base map with me as i can study it and reference timing fuel etc.. Thanks for the consideration and i love the turbo honda build vids i learned from them.

[@juansantana3914]

I got a 98 civic hatch dx and is got a stock engine can i install this intake manifold to it plus i will need the skun2 throttle body to will i need the 70mm? And my is automatic not 5speed?

[@domingospinheiro4209]

is it compatible with original d15z6?

[@sarawakiansborneo418]

Bro..I owned h.civic ek so4 MT..1.6..N.VTEC..I I'm confused where to put the iacv on skunk2 TB?..Because mine the original iacv install below the TB.Need assistant Sir..tqvm

[@Indicafatbud]

i think its designed for aftermarket silicone coolant hose

[@4twonIE]

What is those hose called that connects from the intake manifold to the bottom of by the engine over the oil filter ? Please bro 😅😅😅

[@4twonIE]

🙏🏽

[@ej8leo]

What ecu is this s300 p28?

[@adrianyyang221]

Don’t u need to retune the car with hondata ?

[@letmehearthatguitarsqueal]

What is the background music

[@collingeiger7321]

Been doing research into installing one of these manifolds and checking for specs because the fuel rail I have doesn't bolt up the same way as the factory style, came across an eBay listing with screen shots of your video from installing the manifold. Just a heads up if no one asked to use your content, someone has used it elsewhere.

[@BoBuilds]

Got a link to that listing?

[@BoBuilds]

Found it, thank you!

[@BoBuilds]

I just made them water mark the pictures. Thank you so much for letting me know

[@collingeiger7321]

@@BoBuilds No problem! I noticed it and figured I would want to know if something I made was being used by someone else without my knowledge :)

[@rhonnelagatep518]

wheel specs?

[@sleepy_eg4020]

We’re you on stock ecu when you did this ? Did it mess with your idle at all ?

[@richtmyre4647]

He said he tuned it...

[@Boostedcivics]

And you never talk about the vitara build!!! What was it rod knock?

[@BoBuilds]

Oh I gave an update at the end of my e85 tuning video, yeah it's still knocking. I'm going to start tearing it apart and put new bearings. And pray the journals are still good

[@joeysee5095]

Does anyone know if this actually makes power ? Because I've heard people say stock y8 manifold is already good . But I'm trying to swap the mani for more HP . Any suggestions?

[@YourUserNameSucksx10]

Had one installed on my z6. My butt Dyno felt more from 5 to 7k rpm. But I had aem V2 intake and arm dc421 header with it

[@itztrapz5884]

Wheels specs please

[@Frankiee133]

What Intake manifold gasket did you guys run?

[@BoBuilds]

Just a cheapy felpro gasket from a local parts store

[@Michaelhood0]

Is the fire wall clearance much different with the new manifold? Is the skunk 2 longer? The web sight doesnt show dimensions

[@RDLtuning]

Its bigger, in my 4th gen civic the iavc touches the firewall

[@TURBOTRISTO]

these do stuff all

[@zacnichols683]

Dude the Y8 intake manifold is Dyno proven over the skunk to to make more power

[@Unaveragebean14]

Hey bro I just copped the same manifold but is there a difference in the manifold compared to the silver one(that was also available on Amazon)

[@BoBuilds]

Nope, no difference

[@Unaveragebean14]

GreaseMonkeyMods nice thank you bro and keep up the vids bro💪🏾your civic go hard💯

[@jamesthebond0072]

Did you have to put any new seal or a gasket when you do it ??

[@iluvherjerry69]

always replace gaskets dont be cheap