SOLIDWORKS World: Model Mania 2004

[@siddharthsalkar862]

Material: Brass Phase 1: 492.72g Phase 2: 501.44 g

[@harishwarrier8542]

These solution tutorials are so cool! I'm learning something new in every one of these videos.

[@KevinGerSg]

well its 2019 and your videos are still so helpfull. really good job and thanks for this good declaration

[@solidworks]

Hi KevinGerSg! We are glad to provide helpful videos. To learn more please visit my.solidworks.com/training and kzbin.info

[@shadowdsfire]

8:37 Isn’t using emboss wrong here? Aren’t the dimensions from the sketch projected normal to the surfaces with it? The drawing dimensions are from an orthogonal top view. Or maybe I’m wrong and the “boss extrude” from solidworks doesn’t worm the same way as “emboss” from fusion 360 which is what I’m using right now.

[@mr_eman]

Replace Face to the flat reference surface is also a great option for Part 2. You can get both the up to surface extrude boss and cut in one feature. Don't recall if that feature was available back in 2004.

[@majidrahnama7357]

Very good and excellent floating design

[@TarunKumar-ed4ke]

man today i know how much i got to learn more

[@solidworks]

Hi Tarun! Keep it up! The process of learning has no limits! 👍 🤩

[@mahmoudjawhar653]

2021 Great videos! Model mania parts are really helpful for practicing , thanks

[@MrRodrigopfaustino]

how you switch from the sketch to the surfaces toolbar on minute 4:18? what's the command or hotkey?

[@markschneider6718]

Double click the Left mouse button in the graphics area to exit the sketch. That is why the Sketch tab on the command manager went away

[@Ernescme]

I only started to learn Solidworks recently so in some parts it was a little difficult to follow all the actions and it took more time, but otherwise this tutorial is excellent and really helped me.

[@josete7050]

hello, how is show the axis selection of minute 3.58 ,thanks

[@siddharthsalkar862]

With Material as AISI 1020 is mass 457.94 grams and 466.38 grams

[@siddharthsalkar862]

Any one with the same

[@mpam002]

@@siddharthsalkar862 yeah i got the same in phase 2 ,

[@cedi98]

What are the settings for this shiny and glossy look of the model?

[@Alpharabius99]

its called realwiev u can only get it with high end GPUs also there is someting called realhack or sometin u can use that for more info ask GOOGLE.

[@SadeghHomaünfar]

Thanks, so helpful Could you please share more videos Especially about surface

[@kevinfrench5249]

Got the first phase no problem using spheres...WHAT THE HECK IS THIS PHASE 2? Okay so I got it. Not too bad just shocking we are now doing so much in a second phase. Not complaining I promise! How did you do it... Oh that's right the shift key for outer dimension of arcs QUADRANT SELECTION? COOOL! Revolved Cut...oh... Offset the sketch? but it shows more than one 25mm offset so I kept them individual. Offset from surface... ARE YOU KIDDING ME? that was so Simple! I didn't realize that both parting lines could occur at the same time Extruded surface! OH!!!! I didn't know about it and used a reference plane. That way I could cut from the surface through all. Automatically removed missing edges. Good to know! woah woah woah! Drag a copy of the fillet onto the edge!?!? QUESTION! how do you get the dependency lines to show up in the Feature Design Tree? I'll probably look this up later too.

[@kannansaravanan47]

Great explanation sir.. lot of ideas I had learned 👍👍👍

[@李昂-y6p]

非常感谢

[@sairashaikh1640]

THANKS BROTHER FOR SUCH A GOOD TIPS & TRICK

[@kamleshpanchal8661]

great sir

[@kandasamyrajan]

Thanks

[@syedabdulali7885]

Damn..this part is difficult

[@sergiumaries8267]

nice job!