SparkMaker LaserPro: The new King 👑 of budget laser engravers?

[@zach3713]

Can you do a video of this unit on something like a yeti cup?

[@grouchydropbear3981]

The slant engraving; any chance that the jittering could be caused by the focus detecting the smoke?

[@StevenDavisPhoto]

That autofocus is super cool. I mostly use a JTech on my CNC, but this is cool too. Better than the Ortur for sure. Being American-made too vs the Chinese Ortur brand is a huge plus. Price upgrade isn't that bad either.

[@KevinGoosie]

I would like to see a demo of it engraving on Stainless Steel if you could?

[@SailingSarah]

That's a "NO". Just .... NOOOO.

[@guindonmike]

It should be mentioned that the Protective/Colored enclosure they offer as an addon also has some updates, an extraction fan/vent. Also all updates based on Backer suggestions.

[@makeorbreakshop]

Good point! I didn't get too deep into the enclosure, but having a fan built in is great, you'll still just need some tubing/pipe to vent it outside

[@lunakoala5053]

Ortur does offer an enclosure as well. Comes with a 12v fan and tubing.

[@Goodellsam]

I would like to use it on polymer pistol frames. Do you think it will work on them?

[@MrTienob]

Thanks a lot for sharing your experiences to the comunity and make us discover new laser cuters. This LaserPro seems amazing compared to Ortur! One question : do you think it would be possible and not too complicated to change the laser for a more powerful one if needed? Thanks again !

[@THERANDYDIXON]

Where can I get your spoilboard?

[@jamesyoung2359]

Is this available for sale now? Also, is it compatible with Lightburn? TIA

[@jeffwilliams4709]

I have a question. I want to buy a cheap lazer that I can use to do veneer inlays. Can someone point me in the right direction?

[@billd6630]

Are there any other lasers in this price range with a similar auto focus & a camera? I'm a little concerned over delivery times?

[@richardfairburn7962]

Have had mine for a couple of months and can only do the most basic tasks. Cannot get an English user manual or any support from SparkMaker. Can you point me to a source of training or tech support to make the thing useful?

[@StudioB7]

572 $ and how you compare with ortur?

[@JohnDoe-qc3bo]

I would go with the Otur just for a cheaper price. I am only considering it as a fun hobby.

[@STWERX]

I'm trying to find a laser that can cut up to 5mm lexan/acrylic any recommendations

[@JapanScott1]

Can it ONLY be used with their software?

[@gazrobbo1]

Can you cut tool shadow boards in foam on these

[@oakridgereview1359]

I have a really awful 7.5w VigoTEC that does cut foam. It's tricky, fast speed, medium power and multiple passes. Don't want to melt it, but vaporize it. Also, speaking of Vapors... Be aware of what chemicals are being released by your materials when super heated like this

[@barryhenshaw9321]

Hey, curious about the watts. Luv your vids :)

[@VadeniucROKasCoTV]

Hello, did you try to engraving icon on black switch from car?

[@techdoc.repair]

can it melt glue through glass?

[@robertmoran9225]

The software that is shipped with the LaserPro is buggy and and not very powerful. LaserPro is not compatible with Lightburn - yet - they are working on it. However after several weeks playing with it, I found that with a very simple GCODE header and footer added to the Lightburn configuration file, the LaserPro will (mostly) run with Lightburn. It has a very small spot and is very powerful. It easily cuts 3mm plywood at 225mm/min at 95% power, and engraves literally everything. It has an internal fan that provides air assist, blowing air from the same orifice as the laser, and the lens is recessed in the laser head so smoke does not settle out on the lens. The auto focus works great, and the enclosure with the fan lets you vent the smoke out a window. The video camera takes a bit of careful setup but is extremely useful. When the LaserPro is fully Lightburn compatible it will definitely be the diode laser engraver to buy. My LaserPro is now the one I use for all my projects, and my previous laser engraver (which I was very happy with) sits pretty much idle.

[@vincentrodak9734]

You're the man for this comment! It's surprisingly hard to find reviews & information on this laser engraver and I'm trying to figure out how this thing measure up to say the xtool d1 or atomstack x7 pro

[@robertmoran9225]

@@vincentrodak9734 Information is almost non-existent, and the support lads keep insisting that their software works just fine when it doesn't, at least on my computer. I don't know much about other laser engravers - I backed the Kickstarter for the Laserpro primarily due to the 10W laser and promised Lightburn compatibility. There a lot to like about the LaserPro - it would be a great system if it was Lightburn compatible. I really like the camera and the (limited with Lightburn) auto-focus, but until the LaserPro folks get their act together and achieve full Lightburn compatibility, I would recommend buying another 10W system unless you are willing to gambol that eventually LaserPro will be made comparable with Lightburn and can live with the reduced functionality until then (the inability to address the z-axis with Lightburn is a big one). That being said, I find it inconceivable that, with as bad and buggy as the LaserPro software is, that the LaserPro will not eventually be Lightburn compatible. Otherwise, the LaserPro will join the Dodo.

[@vincentrodak9734]

@@robertmoran9225 Thanks for the honest thoughts. Appreciate your input so much. I wish a few of these laser companies would just merge and make one bad ass entry level diode laser with all the important bits from each >.

[@TR-qt8tf]

Any info on the header needed?

[@robertmoran9225]

@@TR-qt8tf This will get you to cutting and engraving on flat surfaces, and the camera will work as well but must be calibrated. You have to make sure the autofocus point set in the header is on your work piece or you can delete the last two lines in the header or comment out with ; and manually focus to 11mm. Rotary cannot be made to work in Lightburn at this time. first, you need to setup a device based on GBRL - Serial/USB, 305mm x 215mm, origin at left rear, then Device Setup- Origin W305 , H215, Left Rear, Enable DTR signal, Enable Out of Bounds warning, return to finish Position - everything else disabled. then in Device Settings Gcode - Header M17 GO XO YO ZO M4 SO F3000 GO X45 Y45 SO M206 S11 SO Footer: F3000 M4 SO M206 SO GO X0 Y0 Z0 M5 M18 NOTE!! Autofocus will ONLY be at x45 y45 and this point can be changed by changing the numbers in the header.

[@krisknowlton5935]

And then comes the LaserMaster 2Pro.

[@risbill1]

My main concern would be the constant z height change could affect duality at higher speeds. Looks interesting though.

[@JoeGanja]

Do you think there's a big difference in the different wattages of the Otur 2? And should I wait if I'm not rushing in buying a laser engraver and wait a month or two in hopes of this releasing and it being double the price?

[@makeorbreakshop]

I don't think there are a ton of differences with wattages especially on the diode end since you really aren't doing lots of cutting with it to begin with. Ortur is also coming out with a new version that could be a good option as well!

[@Aerospacesmith]

The LaserPro is about double the power of the high end Ortur laser. The Ortur "20W" model is only 5W of optical output power. The LaserPro is actual 10W of optical output and can even mark on stainless steel as well as easily cut really thick materials like MDF.

[@chrisfrisch1347]

@@Aerospacesmith the higher power the bigger the beam, its a tradeoff, www.aperturelaser.com/ makes a 2w tile master that gets high detail on NWT method, hands down best laser i have used.

[@chrisfrisch1347]

the higher power the bigger the beam, its a tradeoff, www.aperturelaser.com/ makes a 2w tile master that gets high detail on NWT method, hands down best laser i have used.

[@turboflush]

@@Aerospacesmith atomstack has a 10w and neje has a 15w. I like this but the work area is to small for my needs.

[@mamadubwize]

can you please tell me what is the differenc between this engraver and the SparkMaker laserpro for sale SparkMaker3D 7W/10W Laser Engraver & Cutter with Camera Diode Laser Dood engraving machine? and how can one confirm they would be getting the 10w, for sure?any fedback , suggestions? i trust your feedback!

[@chrisfrisch1347]

need some cross wind that lens is gonnna get smoked to the pt of not burning quik. the auto focus censor is a big contributor here as it blocks the smoke in close to the lens

[@TravisRamage]

Have you experienced "Connection Lost" issues with the Diode Lasers you have? I started having this issue recently with my machine. Can't seem to get it working normally again. Any suggestions?

[@ShadowkingX]

Says campaign under review and can't buy?

[@bradbrown2168]

Sculpfun?

[@usmanamjad688]

Brother can you tell me this would be a better option for beginner level i am also interested in this but can't decide on anything yet also i wanted to do something in gifting so this will be a better choise?

[@starwarsmikecustoms3366]

Just came across this. Great video. I went to see if I can order this printer and under their campaign for the Sparkman Laser Pro it says suspended. I know this video is 8 months old but does anyone know if this particular laser engraver is no longer available? Thanks.

Both crow crowdfunding campaign have issue with fulfilment as additional payment is needed to bear the increase of shipping cost. You can buy the machine on the official website.

[@charliebrown4628]

Can you engrave leather with this?

[@rclarke250]

yes, and other cloth like denim.

[@makeorbreakshop]

Yep!

[@FranklyWry]

Yes, but it apparently smells pretty bad, so vent well; no to pleather (which you didn’t ask), unless you have really, really good ventilation.

[@vlCroozelv]

If you wet the leather(lightly) it won't have that discoloration from the laser at the end of it

[@SailingSarah]

So how much is it?

[@mgpmbass3616]

Can it be fitted with an air assist nozzle? And is there an app for Android users?

There is some mode, you can finds them on unofficial facebook page of this laser.

[@jeffreywolfe6313]

Lightburn work?

[@makeorbreakshop]

I haven’t been able to get it to connect so far...

[@sparkmakerofficial8390]

It is a early version LaserPro of us. The default baud rate of the early version is high, which is not in the range of Lightburn baud rate. In our official version, we will lower the baud rate to make it compatible with Lightburn.

[@grantskelton1219]

Ordered one of these and it just arrived today. Have spent the last several hours trying to get it to work. Do you think I can? Not a chance. Starting to lose my patience.

[@thetvbaby83]

Did you get it working?

[@grantskelton1219]

@@thetvbaby83 I have, still trying to figure out the finer points. For some reason it doesn’t always power up when you turn it on. Nope sure if it’s the power pack or what.

[@markhall7222]

why cant you find any good reviews on their laser, wish you could do a review on the latest release of this laser, I like the auto focus part

[@genmasaotome3503]

I'm looking to cut cardboard... would this or something else would do the job?

[@makeorbreakshop]

Yep!

[@jimmyca429]

Hello, would you consider to sell it? :D it not can be founded anywhere...

[@markobaier97]

Is it possible to cut Leather? Like 1-4mm veg tanned Leather.

[@oakridgereview1359]

Sooo, I've got a 7.5W output laser and it slices through 4-5oz leather. Which is approximately 2mm thickness. You start getting into that heavier stuff and you're going to struggle maintaining a clean cut that isn't burnt to death

[@embtroop]

Looks great! I want one but the site has what looks like disgruntled buyers. Anyone have more info? Thanks.

[@jeremywilson3089]

I ordered one at the time of the kickstarter. I'm still waiting for the delivery, with no real end in sight. I have lost patience and would like a refund. While waiting for this item, I have missed backing other items. There seems to be very little communication with the developers. On the off chance they read this, I want my money back asap

[@embtroop]

@@jeremywilson3089 Hate hearing that. Since I started I managed to find a 50W Omtech and started my first test just yesterday. The seller never even did the tests so it was like new. Maybe look on FB marketplace. Several below 2 hundred and I bet you'll see something workable.

[@jeremywilson3089]

@@embtroop thanx for that.but it seems that I have no chance of a refund. Guess I just have to wait and hope it turns up.

[@embtroop]

@@jeremywilson3089 Hope it doesn't take too long.

[@meowmeow871]

what sensor does it use for the autofocus? Would be great to mod it on other diode lasers

[@rclarke250]

it uses an IR sensor, like this www.amazon.com/dp/B07RKTQ53F?psc=1&ref=ppx_yo2_dt_b_product_details

[@markhall7222]

Looks like you have the prototype not the newest one

[@goodgirl5553]

Do all laser machines need to be connected to a laptop or computer to operate ? Can an ipad be used instead ? Are all laser machines compatiable with Microsoft Office Word docs ? Or only vector software ? Thanks for your vids. They are very useful !

[@FranklyWry]

Images with grayscale always use bitmap editors such as Photoshop or cheaper. Vector images used for logos and other line art and for cutting paths.

[@Alex-cj2vs]

I repair iPhones and i was wondering if this lazer is strong enough to burn the glue under the glass of the back of a broken iphone

[@dekurvajo]

Could you tell me more about this please?

[@common64]

interesting product, but I don't trust proprietary software, because the machine may also be the best in the world, but it will always and only do what that software allows it, and if the software is limited or poor, production can only be limited and poor

[@loaderopp]

you would have a good video if you either turned the music way down or even better off. Back ground music should used to fill NON commentary sections. Sorry i cannot finish this video.

[@waynepetrevan]

It would appear from watching this lackluster review that this machine can only engrave (dorky) pictures on wrinkled paper. Not exactly the King of anything......

[@klavete1]

Beware of this product, we are thousands of sponsors who buy it in kickstarter and the company does not send it.says that now the price of transport is higher and does not give options. I know that there are some who saw them the option to pay 3 times what the shipment costs and they could send it.

[@jeheheu23]

I rather my portable laserpecker :)

[@makeorbreakshop]

Laserpecker is great, this one just has the increased work area plus the ability to add a rotary

[@bacsijancsi]

Please no more stupid Baby-Yoda engraving...we are interested about CUTTING and nothing else. Sure for cutting a Co2 better but also cost a lot-lot more, and also a lot more complicated If it is dual laser and 10W it should be able to cut 5mm plywood MDF and many other thing which is just enough.... Please test cutting!!!!

[@makeorbreakshop]

If your looking for no more stupid Baby Yoda engraving then your going to be out of luck ;). Real talk though this unit wasn’t the 10W and even if it was the speed it would need to run be burning wouldn’t make cutting practical. But this would be a good thing to show in the future.

[@bacsijancsi]

@@makeorbreakshop Sorry I did not wanted to be rude :-) I just don't see the meaning of engraving :-) Well I would be interested of some cutting 3-5mm plywood going well although slower with the stronger diode lasers as far as I know (CO2 lasers are a different category with price and complexity)

[@sparkmakerofficial8390]

Hey, this is an early version 7w engraver of SparkMaker. It used a 20mm focal length, not good at cutting actually. Our offcial version uses a 45mm focal length , which has a very better cutting effect. The 10w laser can cut through 8mm basewood in one pass, please take reference at kzbin.info/www/bejne/p2W3mZSQmsRgl8k

[@bacsijancsi]

@@sparkmakerofficial8390 Thanks!!!!!

[@makeorbreakshop]

@@sparkmakerofficial8390 this is a great demo of cutting, thanks for linking it!

[@fate2022]

Wholly crap almost 5k for this thing? You can get a much better and waaaaay more powerful fiber laser for under 3k.

[@telhunter1]

That's "HKD" Hong dollars. Look below for USD.

[@fate2022]

@@telhunter1 LOL, thanks, I completely missed that, but even still, they are originally asking almost $1000 but with the "special" 42%,&33% off knocks it down to almost $600, still far more than a similar setup.

[@makeorbreakshop]

That’s HK, is 500+ USD, but yeh for 5k it would be crazy!