McFarland Fab Opens Its Doors To Repair Ruby's Boost Creep Problem! **EXPERT WELDING**

[@CleetusM]

Only the finest welds for Ruby

[@mehgusta]

best welds

[@71sc502]

"I know welds, I have the best welds. We will make boost great again. Bigly"

[@HighHarvestBuckeye]

Need a McFarland LS turbo kit for my s10 project. When are they being put into production?😂

[@scottyknot7403]

As long as ruby keeps ripping! Thanks for the tips man!

[@scanjet1600]

You made sure to have the gas on this time? Ayyyyyyyy

[@jimdiroffii]

Hell yeah brother! Glad to see you like the welding hood and gloves! Made my day to see you using them on Ruby. This is the only channel on YT where I have notifications turned on. Just can’t get enough bald eagles, bartleskeets, and burnouts. Glad I was able to give back to this channel. You guys are the best. Do it for Dale!

[@richardoconnor7162]

Now if he only was using the rest of the gear he should , like um maybe a apron and pants.

[@mattlandorf1595]

Yeah for a small job shirt and shorts is fine, but for the hour plus of gun time hes gonna have some nice uv burns on his arms id think

[@ronjlwhite8058]

Hell yeah brother!!!

[@bgd73]

glad to see the right stuff in use. I don't mind sparks on my beef jerky arms.. it has occurred to me days after welding the UV was almost atomic reactions. The big light has a big invisible... not to be the weird dweeb in the comments. Stay safe.

[@LegitElf123]

Lowkey loving these constant videos! I know it's mentally and physically exhausting but just know your videos make my day!

[@opticgordon9677]

same here

[@biggtofly]

That's how I feel daily action!

[@joeburrows6]

How would you know it's mental and physical lol you have 10 subs like me lol.

[@WTC7]

What does lowkey mean? (don't understand slang)

[@Siddy22]

Same here as well

[@68camaro86]

Macfarland fab, burning more wires than tires!

[@ryancollisson210]

Dead asf

[@Joshcustomknives]

Full spool... of wire.

[@mightymouse1926]

Please make this a T-SHIRT

[@jacobolson3996]

When someone’s says “I gotta guy who can weld” , Cleetus is that guy.

[@promenacegaming5402]

Grinder and Paint, makes me the Welder I ain't!

[@curthook9622]

Dang... that pipe is back to 1 1/2 with all wire clogged up inside there lol

[@martindinner3621]

Might get it to sing though!

[@allenl9031]

McFarland Fabrication We Can Plug Your Gaps And Gap Your Plugs!

[@trosperdwuane2009]

🤣🤣🤣🤣

[@Kilow956]

need that on a shirt asap

[@disuye]

... and Glug Your Paps ... wait what?

[@allenl9031]

@@disuye Chug you Pabst!

[@joshanderson1019]

3:38 demonitized for sexual content

[@kennethjudd7993]

Grinder and Paint makes me the welder I ain't. Next Fab T-shirt.

[@waybous]

Hell yeah. That would be a shirt I would buy.

[@mash3749]

Im a welder by trade and this was so entertaining good job brother 💪

[@MrNumaNuma13]

If you're saying good job on this I wouldn't want anything you've ever been around ever 😂😂😂

[@JayRays1truck]

Slothmfpierce I’m pretty sure Mash meant good job on the entertainment, not the welding.

[@DMPB-fi2ir]

lol ya very entertaining hehehe .... someone next time should mention cutting his birdmouth for weld with a hole saw

[@toddlaplanteVT85]

Grinder and paint makes me the welder I ain't!

[@llamacebu216]

@@MrNumaNuma13 pretty good job for someone doing it by themselves for the first time without help Please tell me someone who has mastered any type of trade in a day

[@wasawasablingbling]

As a structural fabricator that was a tough one to watch. Someone send this man an angle grinder

[@iMatt246]

So bad that its hilarious lmao goes to show that you dont need to have weld porn quality welds if all you want is to make some power lol

[@ineedmymodfixed]

You don't NEED quality welds to make power, but it sure can lead to damage and issues down the road. Imagine those pieces of wire going into the compressor side of the turbo. Not the best way to treat a turbo lol

[@reviewcrewforyou]

No way to get better but keep trying. Makes it easier when you have a turbo sponsor lol

[@oldninjarider]

and a few burrs

[@oldninjarider]

@@ineedmymodfixed turbine side on the exhaust. Yes, I forsee chunks blowing into the blades.. time to get out the burrs and grind away.

[@MrJamesBanana]

You should get Ruby an extra tractorflap for the wastegate!

[@vinboy11]

That would be the best design for any car

[@BeamerTheFox]

45th thumb up on that one bud it needs to be a thing lol.

[@therealplax]

I agree 100%

[@thesaltychip5850]

for sure!!!

[@ryantaraskas5759]

That look sick

[@dirtracer21d]

Welds on Ruby are the only thing left that is a “junk yard build” love ya Cleetus 😂

[@hillbillyhippie597]

Tony Davis that weld job was hilarious 😆. Cleetus will get better with time, It reminds me of when I first Learned to weld

[@dirtracer21d]

Casey Culp I learned when I was 14 😂😂 old 6010 and 7018 from my grandpa. Now I do it professionally everyday, definitely not stick though haha all custom fab for me. He’ll get there with practice

[@ryantaraskas5759]

Jeremy’s face priceless. You interrupted my Chipotle time for this

[@spencerharden9175]

Everyone has to start somewhere at everything and so the fact that you sir are willing to show you’re progress and you learning how to weld is very brave of you especially with the way people are these days in the comment section. I have nothing but respect for you. I would love to help in any way I can

[@edgardoruvalcaba]

Probably the best welding I’ve seen in a while! Good job Cletus!

[@brettbaratheon9776]

Best channel on the tube.....hands down. Congrats on all your success!!

[@TURBOSHANE101]

I think your pipe has a case of the Herpes .

[@offroadcanadian807]

cletus tig welding now thats somthing i have to see.

[@davidmackieson4609]

Imagine with him with an arc lol

[@stymiesnerdly771]

Finnegan would be proud. I think the same description he used for his headers appies to this situation. "It looks like Ray Charles welded it with his feet!"

[@jasonbaker2723]

Lmmfao. That's great.

[@harrykelly4651]

I'd love to see a collab between Mike and Cleetus

[@gerardmontgomery280]

That's savage mate.

[@muskokamike127]

haha I'm going to have to remember that one...ray charles with his feet lol PRICELESS

[@jrichardson-m9m]

"Grinders and paint make me the welder I ain't" - AvE Words Cletus seems to live by.

[@lanebarker4017]

If you can’t weld it good weld it a lot

[@airheadvw4479]

The bigger the glob the better the job. When welding one of two things happens you become a good welder or a good grinder. I have become a good grinder hell ya brother

[@legionyinword]

Good point cuz you're only willing to spend 15 minutes I'm cutting it cost you two hours on welding it. Time to buy some cutting tools.

[@hentaisoldier3191]

Put some ski’s on Ruby and see if she can make it across the lake

[@madmagyver9981]

Yesss!!!

[@79tazman]

We do that with snow mobiles here in the northland

[@sh3lbot]

@Bicc OG ​ 79tazman middleland bitches!

[@J_M3444]

Bicc OG you sissies in the south wouldn’t know what to do if you were up here only takes real men to bare - tempatures

[@charleybetts1053]

@@sh3lbot *EverywhereLand* bros!!!! #MotorhomeLife #OnTheRoadAgain

[@Silverfire308]

Hey, to make it easier to fill gaps, use a half circle, do it then stop, then do it again, then stop and continue to do that until the hole is filled then grind it down some and then weld over it to make a better looking weld

[@jasonbaker2723]

Right

[@MaverickVersusEverything]

We often have you guys playing in the background. Crazy that you still shout out smaller channels - much appreciated!

[@Hman9876]

Nothing makes me happier than a Cleetus upload

[@adamcroteau8711]

For me, boostedboiz and gingium are tied with the old cleeter mc skeeter

[@ModMotorMayhem]

Screw stacking dimes, cleetus stacks 5 dolla bills worth of mig wire bois!

[@BOOT]

Stacking grapes!

[@jasonbaker2723]

Hell yeah he does brother. That big of of a gap you have to do spot welds on each side to fill the gap then lay a cover bead over it to finish it off.

[@wobblysauce]

dimes are for poor people.

[@patiencecansler204]

Jason Baker gwggmin. No

[@valentinagarrett8989]

📢📢 *I МÀ!SТURВÀТЕ !Т0 V!IDЕ0S 0N МY СHАN!NЕL! L00!K!* 📌📌

[@chetSeminole]

Finish off with some JB Weld gooped on and you're all set.

[@TylerRivera635]

God when I watch McFarland fab work it brings tears to my eyes I’m proud boys!!

[@jesseserfling6807]

I love the fact that you are taking the ambition to weld your self it's nice to see people teach themselves new thing keep it up. Boost it for dale

[@Zeta368peep]

>Does alot of welding of all variations for a living. >See's McFarland Fab's Bansaw Work alone. [SCREAMS INTERNALLY]

[@adventuresofwillandshelby6013]

BOT 😂 same

[@snikwad003]

>welds a bit but not for a living > uses bandsaw almost daily >Can lay better welds with powermig 140 110v flux core [Also screams internally]

[@kenbobadams5494]

Saaaaaaame😂😂😂😂😂

[@metal0369]

Now that’s she’s got a semi permanent motor in her I think it’s time for the hood to be put on 👌👌.

[@j.j.3391]

Yea yea get some aerodynamics in play for the engine bay.

[@freedomfox8183]

Yeah should fit right over the turbo kit lmao

[@archangelspythons]

You would only have the front bit and a 3rd of it on the drivers side

[@martindinner3621]

Yep. Don't bother with the hinges, just use mounting pins!

[@adventuresofwillandshelby6013]

Dad always told me “if you need a grinder to make your welds look good you’re not a welder, you’re a grinder!” 😂 Sounds so sick. Can’t wait till next track day!

[@mattpeterson7074]

Thank you James. "That's a booger and half." Someone had to say it.

[@keenanhass6114]

You are the King of cob jobs...amazing you get down any track at all.

[@JayRays1truck]

It doesn’t matter how good of a welder you are, it matters how good of a grinder you are! LOL!

[@coryperkin3350]

Jay Ray i don't know about you but finish isn't exactly priority for these boys 😂

[@fishyfool]

I was thinking they should invest in some flappers www.google.com/search?newwindow=1&tbm=isch&sa=1&ei=BJmmXKuFKorL-gT44KCADw&q=flap+disk&oq=flap+disk&gs_l=img.3..0l2j0i30j0i5i30l3j0i10i24j0i24j0i10i24l2.68716.74864..75258...0.0..0.79.389.5......1....1..gws-wiz-img.......0i7i30j0i8i7i30j0i7i10i30j0i67.Rfmq3IEfhMQ

[@brendanmccarthy492]

I’m just wondering what the inside of the pipe looks like. Probably a million little spikes inside where he welded.

[@andrewsalacina9705]

Grinder and paint makes the welder you ain't

[@jasonbaker2723]

Right. But a certified/degree welder should be able to fill any gap. Because there are times to where you are not able to use a grinder. I have been in that situation.

[@chiprek8595]

Grinder and paint makes me the welder I ain't.

[@chrisbridges4297]

me too

[@RamblinAround]

I'd tack a piece of flat plate on both sides of that pipe, so it hides those welds :)

[@Taylordrifts]

That's pretty funny, I got welding stuff in fanmail the same day I was welding lol

[@bradpeterson5356]

Good stuff as always guys! Get that 8 second pass under the belt...... then it's on from there. Can't wait to see LeRoy and Ruby line up with competion in the other lane!!

[@chevyboysb]

I usually chuckle at your videos but those welds had me dying!!!!😂🤣😂🤣 I love the vids keep it up

[@Soggywafffles]

The Juggernoggin same here

[@yobert9385]

Cleetus " not bad for doing this all with a band saw " McFarland

[@NovaRedHead]

Yeah brother, 1 minute after upload. LET'S GO!!!!

[@dadsshenanigans9632]

I trust your welds about as much as gas station sushi. Lol love the channel

[@Thehouseofboost]

Awesome! You could always add a brace between the crossover pipe and the wastegate pipe to help support it

[@PsalmFourteenOne]

wow I can feel better about my home brew pipe welding after watching this. ha ha Also, a $300 eBay plasma cutter comes in handy for cuts and notches

[@ryantaraskas5759]

Shawn Barnish bro you can get a good low cost plasma cutter at harbor freight

[@ryantaraskas5759]

Shawn Barnish idk I don’t really trust e-bay I’ve been got before with tricky pics n wording

[@caddyguy5369]

Z P That depends on what you need.

[@caddyguy5369]

Z P Does that mean the lifetime Warranty on other brands makes them trash as well?

[@billybadass411thefirst9]

I bought a close out Harbor Freight plasma cutter for $250. It was the display and needed a new tip. That thing is awesome! Cuts 3/8’s plate steel like butter. I’ve had it for a few years and it has more than paid for itself.

[@HAYSE557]

New T-Shirt Design: Back: No Gap to big, No gap to small ---l with a Mig stinger Front: McFarland Fab I would buy one, just saying.

[@thehammer_7840]

Shut Up And Take My Money

[@angelnegron6798]

Over 700 ft of wire later. It's not going anywhere!

[@tonydowns9424]

Thanks for making me smile today!

[@GenerationAI2024]

Hi there, a good thing to always do is making sure the feeding cable is as straight as possible, it sounded like your welder struggled to feed the wire. Thanks for sharing :)

[@alexduke5402]

No Gap too big no crack too wide he can weld anything from broken hearts to the crack of dawn

[@petarpuhanic560]

- James, remember, don't look directly at it! James - *turns into an eye of the weld Gods*

[@DRG00DandS3XY]

Nothing like being flashed

[@docholliday9791]

Next thing in the fan mail will be an angled grinder lol

[@marksbaldeagles5467]

And a die grinder so he can clean the inside as we!!

[@jasonbaker2723]

Have one in the mail already

[@altonb93]

Its funny watching George trying to avoid the camera before he joined Cleeters crew😂

[@thephilosopher13]

Way to make it happen Cleetus! That being said… thanks Tye! Lol

[@jaquezmyrick600]

Get the fire extinguisher (T-shirt with cooper holding a fire extinguishers and Cleetus shoe on fire)

[@anthonybonnelle786]

That's a number one seller

[@wowgodiamond]

Ruby is turning more and more into Leeroy each day 😂

[@charleybetts1053]

Haha... SOOO much for the "budget/junkyard build" I knew the route it was going to take once they put that $5k+ powerglide in it!! Lol

[@thedarklordsknigh]

A dressesed Leroy

[@mahmoudsalah6418]

@@thedarklordsknigh what better cars you can have than a leroy and a powerglide leroy !

[@bronzewaffle2310]

Charley Betts StreetSpeed717 said on one of his IG post comment replies that the powerglide unit was ~$25k

[@thedarklordsknigh]

@@bronzewaffle2310 yeah but I don't think he has the hook up like cleetus does I don't think cleetus paid no where near that

[@Pitmaster4Lyfe]

I'm gonna need to invest in McFarland Fab and purchase some stock ASAP!! Cause I can see it's only a matter of time before it takes off and we'll be rolling in the dough!! Keep up the fabulous fab Cleetus!! Do it for Dale bro! 💪🦅💯🇺🇲

[@Maresca0v0]

I never comment on videos at all....been here since before Leroy and i must say this is some of the best car content out there.......

[@donpetillo9138]

Those welds are going anywhere. U got this Cleeter. Go Ruby

[@hestonhartshorn9088]

Hell yeah brother! Keep em coming!

[@gostriderblack]

Laying beads!! Lookin like a Mardi Gras necklace. Keep up the good work McFarland fab all the way.

[@misterss8778]

ghostparty 😂😂😂💥

[@Stevesbe]

More like laying boogers

[@adameldridge]

what

[@flexch2011]

"Lil Glory hole" 😅 "bubble gum"& "Gota booger there"... gota love the welding lingo 😉

[@mightymouse1926]

More lingo is to call and ugly weld "bird poop"

[@scottgregory9672]

Nice to hear Cooper out again.

[@formula3fity]

Awesome work with new motor and wastegate upgrades! I’m proud of you guys, let her rip and eat at the track, let’s see that eight second pass.

[@SuperformanceMK3]

McFarland Fab, we hack with the best of ‘em

[@mickdejager3910]

Gotta start somewhere 😂 😂

[@darrienobrien7591]

There is a weave technic. Where you go left to right cleetus it makes filling gaps so much easier and better looking welds👌

[@tidobass6048]

Darrien O'brien still need something at the root on that gap lmao tig would have been ideal for it make a cold lay and then weave over top but even then sketch weld

[@darrienobrien7591]

@@tidobass6048 I've made 1/4 passes perfectly fine. Preferably you'd want a root pass. But you can still weld off wire you've already put down.

[@tidobass6048]

1/4 inch passes yea that’s a 3/4 pass at least a 1/2 gap there would have to be multiple root passes to fill the area. I myself am also a welder a trade and with thin gauge material with warp tolerance for the flange and the issue of excessive penetration into the manifold the only resolve in my book would be to use a proper couping for the pipe but being done with a bandsaw my next move would be to use tig to underlay cold weld and then a hot pass weave probably with a purge and set in sand for heat displacement.

[@tidobass6048]

Everyone has there own preferences

[@darrienobrien7591]

@@tidobass6048 That's very true. 😁

[@williampaul2819]

That C10 though! Y'all should do a customer vehicle video. Show off what else the shop turns out.

[@thomasC63]

Y'all need a team name for you guys. Keep up the great work.

[@dev894]

Jeremys thinking that you are buying the next shipment of welding supplies

[@Oink_Blaster]

Shoulda mounted the wastegate directly on the exhaust housing of the turbo. No more boost creep, EVER.

[@jacobszymczak9323]

I don't think the exhaust housing would've survived the Band Saw treatment

[@Oink_Blaster]

@@jacobszymczak9323 😂

[@AT_motors]

Cleeter McPeter back at it again!

[@codymcclure2298]

LOOK AT ALL THESE VIEWS YOUR GETTING!! IVE BEEN HERE SINCE THE BEGINNING!! YOU ARE THE MAN!! STILL DOIN IT FOR DALE, KEEP IT UP CLEETER MASQUEETER!!

[@roscocsa]

Never welded with gloves before , it’s a game changer. Goodness. Thats’s a hell of a statement.

[@curtisjoe24]

You should really consider letting someone who knows how to weld give you a couple lessons. Gotta tell ya that was kinda hard to watch. Lol. You got her done though so good job!

[@brandonmowbray2518]

Hell yeah brother!! Loving the daily uploads👌

[@Beardest_Fishing]

I see a MASSIVE sunburn in the future for some employees of McFarland Fab and Tuning..... PS. stitch welding isn't the best method for sealing a turbo hot side.

[@Cyrix2k]

For that little bit of welding? Nah.

[@ryantaraskas5759]

Tig welding is always the best way for exhaust pipes

[@tappedurmom9739]

That's not a stitch weld. Lol

[@ffwest12]

The king of Gap Welders!

[@ScottHBrown]

Cleeter McBoogerweld McFarland! Awesome job Garrett!

[@magia5035]

Cletus. That was the wire. Haha haha. Good times. Trigger pulls like a gun to make build up

[@jeremyjensen867]

I saw the face of Jesus in your weld

[@charleybetts1053]

J.Jensen hahahaha!!!! How's life? You and Heather all good??? Still living the married Racers' dream???

[@jeremyjensen867]

@@charleybetts1053 Hey bro, yeah it's all good, and you?

[@jospi2]

I saw a bald eagle. Maybe they're the same?

[@grumples1517]

Was is black jesus or white jesus

[@j.j.3391]

Brother I saw Dale in them welds.

[@-g-4356]

McFarland fabrication, King of the booger welds 😂

[@garrettleslie3589]

#24 on trending!! HELL YEAH BROTHER!!!

[@ELLeeOh]

It's a miracle! 👍👍from this guy

[@mateuszb.4011]

Damn brother. Since you upload every single day id rather watch your vids than an episode of walking dead

[@Max-me9xq]

Do you guys need a pencil grinder? I guess I'll have to send one

[@lovescamaros1]

pencil grinder and a cutoff tool make pipework so much easier.

[@misterss8778]

6:35 I was really hoping for a “He’s on fire help me Oprah, Gotdayum save me Tom Cruise” but nope nothing... 😢

[@promod400exridr]

I see brake parts cleaner near the bench vise...if you use that for pre-weld cleaning, make sure it’s NON-chlorinated! The chlorinated stuff, when heated, makes a toxic gas. Don’t want y’all getting hurt over there. Keep on keepin on! 🇺🇸

[@mrgmc6314]

Jeremy got the new crown vic coming for neighbor... and them pfi boys got that k tuned dale truck almost ready to run dale himself ... cant wait to see the cross shop love

[@tgvaillancourt]

That pipework is painful to watch. You won't even need a wastegate you'll have enough holes

[@thehammer_7840]

Sh"t is cringe worthy for sure. Lol

[@Yakcm2]

And I’m sure you gentlemen can do better?...right, thought so.

[@EricSmith-lj7ln]

@@Yakcm2 Like its hard to do better. But can they do better there second time welding like he is

[@InFiD3ViL1]

@@Yakcm2 How the hell does anyone improve at anything these days if they can't take a bit of criticism?

[@secretharbour5733]

@@Yakcm2 your kidding aren't you ,that was the worst welding ever done, period.

[@samuelgillespie5415]

Did anyone else squint when he was welding XD

[@HulkSmash177]

How do I get a hold of McFarland machining? I need some head work done....

[@alonzohall9561]

Still trending 22!!!! Hell yeah brother!

[@badhonky6473]

Cleetus can weld anything from a broken heart to the crack of dawn.

[@siccmade425]

Who stole your grinder from the shop? Metal fab 101....🤔

[@alexc.331]

Legend said that if you comment early a wild cleetus may reply to you😯

[@DadsDriveway]

With this kind of engineering Ruby might just gap Leroy!

[@3a.m.284]

CAMBAMS gap Leroy into 1926

[@brandona4618]

Yep. Weld gaps 😂

[@cory0702]

Ruby is going to rock

[@himmelsautoadventures9733]

Love watching your videos. Always exciting. And I almost died with the tracker tipping over. And also did a merch order last week. Keep on keeping on.