STAGE 2 map for 1.9tdi

[@cultusgti]

Thank you very much for taking the time to make these videos , a very interesting insight to custom mapping.

[@jamie9383]

Love the video get me subbed waiting for more,

[@imazlevaz8267]

Keep up the good work

[@fredericodias1]

Hello, Nice video. What do you use to read and write in the ecu? Thanks

[@johnybispoo9115]

Hi there very interesting the part where the dur maps correspond to a certain working degree or rpm, didnt know that, always learning, i just have one question, to achieve that SOI you add to work on SOI limiter map a bit right?Or its not necessary? I have a 1752vb in my pd130, and my work on the ecu till now is good, the car feels great, but i have to put FMIC, some IAT temps happening with SMIC. Greatings from Portugal.

[@alessdiazlopez54]

Maybe could you do an stage 2 for an asv (110) vp? I love seeing your videos

[@eduardofernandes7691]

Hi! How can I get the turbo to fill up sooner? Regards, Ed

[@AzzyAasbjorn]

Do you have any reccomandation, on a A4 B5, with PD130 engine. 4bar map sensor. PD150 injectors, GT1856V, FMIC and straight pipe? what i should run when it comes to injection quanity etc still runing a stock clutch so dont want to max it out at 250. trying to keep it for a while haha

[@tiagomarques8037]

Hello friend, I have a question, can I add 100mg to the maps or will it block the ECU?

[@brennanbarker1548]

I have a question. I have vag edc suit but I don’t have the stock map file or any data to change. Can I download it from my ecu through a obd 2 port or do I have to download a file online?

[@tarekejjaad3982]

why yo dont use stock injectors??

[@TimyDinica]

Daca fac o mapa identica de 101cp cu asta, are cv ? De cați cp e mapa ?

[@stiky4836]

Does edc suite only for for vag group?

[@PUBGMOBILE-ms9qh]

Hi do you recommend remap map to ecm titanium?

[@joaoarruda820]

Can you make a video with 1756vk and Cupra intercooler which dowpiwpe 70mm and hard pipes 60mm

[@grantmorris6637]

What are the chances of getting a copy of this map

[@stefanelcernautanu5480]

Salut ! Observa ca esti roman , imi poti spune daca partea rece de pe gt2052 se potriveste pe partea calda la gt1749 ?

[@Blandy929]

Yes. The gt1749va turbine is only rated to 1.6 bar without egts getting excessively hot. So a gt1752va would only do 2.6 bar boost pressure safely. I dont know about the vb.

[@srbgamezone3084]

u are legend help me with all videos

[@mads501010]

Hi, i have copied your settings but i'm overboosting +2bar, how do i get this down to the target? :/

[@lukasstiftner1167]

You had to make your n75 setup higher.

[@mads501010]

@@lukasstiftner1167 doesnt it affect the engines "breathing"? Loosing power?

[@mads501010]

@@lukasstiftner1167 i have set it at the High boost to 94% just for it to be around the target but does it not affect the engines "breathing" 😅😅

[@lukasstiftner1167]

@@mads501010 Max on n75 duty I would make 78%.

[@mads501010]

@@lukasstiftner1167 but then its too High in boost 😅😅

[@kaja9917]

Hej, i dont get it why it uses duration table 0 only if its 25 degrees before tdc. I mean how should it know how long the injector is gonna be open otherwise ?

[@acclrtester183]

the map "selector for injectior duration" at 25 degrees uses duration table 0 that's why

[@okthennnn]

You say on the torque map that it will inject around 75-80mgs instead of the requested 70mgs because you changed the ratio. You never showed that ratio change?

[@AnotherCarChannel1]

i was talking about duration maps . in duration map 1 ,i inject about 36 degrees at 4k rpm. and 36 degrees its more than 70mg. With stock 520 AR/BA injectors from awx/avf engines you need ~32 degrees at 4000rpm for 70 mg of fuel, but i have 550 injectors from ARL, with bigger nozzle..thats why i said i inject around 75-80mg.

[@okthennnn]

@@AnotherCarChannel1 Thanks. I thought I had maybe missed a new trick for scaling bigger injectors.

[@fedelescristian8346]

Salut, sesizez ca esti roman dupa accent, la un alh cu turbina de asz, cam cat de cat boost ar fi nevoie?

[@AnotherCarChannel1]

turbina aia functioneaza pe asz cu 2350mbar maxim pe harta de fabrica. o poti duce la un 2500...max 2550 ,ca sa nu o violezi prea tare.

[@borys0001]

Hi can I use this map for 105 PD ?

[@pedrovicente3926]

105 PD original? Go stage 1

[@borys0001]

@@pedrovicente3926 Thanks

[@diogoferreira4591]

Software download pls edcsuite

[@pedronogueira6897]

Great vídeo, can you share the file? Tanks

[@Systematicperformancecentre]

Would you write for guys like me in South Africa

[@fabio325i]

Is this safe for a 1752vb?

[@Blandy929]

Look for a compressor map and find out the compression ratio.

[@krisztianforro1263]

Hello can you please contact me? I have the same setup but on a passat. I am interested in the map , could you please send me it?

[@juanicosanchez2792]

Hello my friend please you can help me im hace a problem whit my stage 2 1.9 TDI pd ajm, whit ARL inyectors, 3bar map, 2052v turbo please thanks so much!!

[@acclrtester183]

whats your problem i want to do the same setup as you with my ajm?

[@juanicosanchez2792]

@@acclrtester183 hello, I would like you to give me your opinion about my stage 2 and also that you guide me to solve my problem is that I have a pressure peak in the duty cycle at 3100-3400 rpm... and I wanted to lower it a bit since I know It goes from 2bar... I want 1.8 bar max.. how can send you my file and my logs

[@acclrtester183]

@@juanicosanchez2792 sorry it's not my video. I am also intersed in this setup this why i asked about your problem! i'm planing to install soon a 2052 in my ajm.

[@KygoNky]

Salut, as dorii sa invat si eu. Platesc fiecare sedinta

[@joegermaine4208]

I have a few questions about your turbo

[@AnotherCarChannel1]

what do you want to know?

[@joegermaine4208]

@@AnotherCarChannel1 what is it

[@AnotherCarChannel1]

Its a hybrid turbo. Half its from audi 2.5tdi . The cold side.

[@joegermaine4208]

@@AnotherCarChannel1 can i comtact u anywhere else ive got a few more questions

[@AnotherCarChannel1]

@@joegermaine4208 facebook.com/adriano2br