Special Thanks To My Patrons! Juveri Setila Dylan Webster Adrian Bartoli thevalueof04 Help support future videos! / saidtoomuchproductions Join The Community! / 460660631342000 / discord
Пікірлер: 85
@soggyman38524 жыл бұрын
One of the most entertaining and unique music channels on KZbin. Yet he’s got 11k subs and not 1 million. That’s criminal
@SaidTooMuchProductions4 жыл бұрын
Thank you!
@soggyman38524 жыл бұрын
Said Too Much Productions I generally hope your Chanel blows up in popularity soon. You deserve it. I can tell the effort you put into your videos. Honestly one of my favourite channels to watch. Keep it up man, you’re fucking awesome!
@RockStarOscarStern6344 жыл бұрын
@@SaidTooMuchProductions Tuning down a fourth or fifth from E standard got you a baritone on your electric guitars, & it happened the same way on Acoustic Guitar.
@RockStarOscarStern6344 жыл бұрын
@@SaidTooMuchProductions For an Acoustic Alto Guitar get a Guitalele. Don't forget your Acoustic Bass Guitar.
@belcarra3 жыл бұрын
He’s gained 4k subs cranking out videos for the last year, I doubt he’s going anywhere. But hey, I’d love to be proven wrong
@mal2ksc4 жыл бұрын
In case it escaped the notice of readers -- you only need to source your low string. The others can all be shifted over one slot from a standard set, since you're tuning them to the same pitches (except G falling to F♯) and you just don't use the high E string at all.
@tornadohill1709 Жыл бұрын
definitely love your information, and your energy! Keep it up!
@RockStarOscarStern6343 жыл бұрын
It would rock if they had Tune-O-Matic bridges for Acoustic Guitar that you can adjust justl like an Electric Guitar. They've once fitted an Acoustic Guitar with a Tune-o-Matic bridge which didn't kill the sound but made the instrument easier to tune.
@adrian1997r4 жыл бұрын
Sounds Pretty cool :D
@brendanhoppe2274 жыл бұрын
So glad you did this! Funny cause I just put my acoustic in f# standard a week ago!🤣
@materiagrezza93314 жыл бұрын
Did the neck bow? Does your acoustic have a truss rod?
@SpecialFragoutYT3 жыл бұрын
Can u answer the question up of me
@brendanhoppe2273 жыл бұрын
@@SpecialFragoutYT suprisingly didnt bend much at all, I only had to tighten the truss rod a tiny bit cause I used fairly light strings for an acoustic in that tuning. I will say it didnt sound the best being only a 25.5 scale but if you had a baritone acoustic you'd be able to pull it off if you honestly wanted to
@SpecialFragoutYT3 жыл бұрын
@@brendanhoppe227 nice thx
@773Spair3 жыл бұрын
I think a baritone acoustic would be worse for tuning up to F# standard, not better.
@Alex-ze9tv3 жыл бұрын
Baritones usually sound better playing single notes or more deconstructed chords. I wish you had demonstrated that.
@blahblahsen11424 жыл бұрын
i'm a bass player and i got sick of my band booking "acoustic sets" under gazebos and crap, so i got a cheap pink guitar from a pawnshop and made it into a bass. made a new bridge with moveable pieces and i currently keep it in either F# or E standard. for a cheapo pink guitar i painted black, the intonation is fine, it does struggle with low tunings but i use stringjoy steel strings for a bass and it works. not a clear or loud as i'd like, but it will function in E, with a little tinny rattle, F# sounds fine but i cant even get my band to slow down a song or let me have an intro, let alone capo up for my bass. we normally play in C, which is a problem because even a 145 in C1 has no balls. just weak and crappy. i found the trick is to use a brass nut, bridge and use ever higher tension on the low strings so the highs are kinda loose and the lows get really tight, so it compensates a little for lack of volume and "warmth" to some degree. it's not ideal, but again...functional, and i'm not spending a bunch of a huge fat acoustic bass that hurts my shoulder to play like i'm hugging a damn tree. running a 110, 70, 40, 30, so the F# has over 34 pounds of tension, then 24, and the highs have 14. keeps the highs from overpowering the lows and keeps the tension overall at 87, which is lower than the 97 you get with a set of 6 acoustic light 9's. so despite that low F# being like bridge cable, it's not turning the neck into a bananier. that's french talk for yellow-fruit.
@guitarplayer90004 жыл бұрын
Blah Blahsen Why not just buy an acoustic bass? They do exist, y’know.
@zaidanp72584 жыл бұрын
@@guitarplayer9000 hurt his shoulder y know? 😁
@hannes17343 жыл бұрын
You know that acoustic basses exist, right?
@benlow464 жыл бұрын
I just used standard strings and down-tuned to baritone on my Ovation Balladeer wish almost no problem, there is just a bit of fret buzz, but It's not much worse than it was before. It is slightly quieter, but barely noticeable.
@michaelnelson95542 жыл бұрын
I have a First Act electric guitar I bastardised into a baritone with a mixed set of light bass strings and heavier guitar strings. Between my string gauges and scale I ended up tuned to like C# or something. Also being a bass player I tuned 4ths all the way down like a 6 string bass. The end result was fun as hell, and I think it sounded way meaner then it used to. It played allot like a bass yet like a standard guitar simultaneously, it was kind of trippy but awesome in every way. Fish On!!!
@alaricpaley68654 жыл бұрын
I have a nylon String with some ridiculous string gauge. it's tuned to Open C.
@kaedeschulz54222 жыл бұрын
Sounds good! Only needs a bit more bottom end :D Love those videos!
@bidyutdatta50423 жыл бұрын
Nice talk
@zyan_suxx96364 жыл бұрын
My crapy rj guitar (Filipino brand) has DR drop down 13-65s and it's always tuned to drop A, drop G or b standard
@stanmcdonaldjr76603 жыл бұрын
Hey I would love to see you move the bridge back on an acoustic and add to the scale length. Please do a video on that ! I'm thinking about doing that just for my low e string.
@kaznrg2 жыл бұрын
That would put the whole thing out of tune, since the frets are located relative to the original bridge position.
@heggy_694 жыл бұрын
Lmao I've been using a nylon string tuned to a bass for recording. No adjustments and I'm using just normal nylon strings. Granted I only have two and the fret at the 12th position fell off (not sure if that's related) but it works if you pile on some eq
@edwincancelii29173 жыл бұрын
In my opinion, that tuning is useful.
@brCharlieNagy Жыл бұрын
good demo, thans ... What is the tuning ? B-b maybe ?
@slapndbass2 жыл бұрын
I tune ti b standard sometimes. I use 13s fron daddario phosphor bronze. They're cheap but they sound great on yamaha F335
@andrewhollis48933 жыл бұрын
Would you mind posting the exact specs of the guitar and strings you ended up using here? For one I'm not sure what strings those are, since the package says .070, but you said .074 in the video. By the way, did all the strings fit into the slots of the nut, or do some sit above the slot? Particularly interested in if the low E fit into it...
@rickbug9504Ай бұрын
Hey bro, what gauge of strings did you use? How was the tension and action of the strings?
@demongodjr4 жыл бұрын
So what was the final string gauge
@zueiraautentica59773 жыл бұрын
Have you ever thought bout a SUB-CONTRABASS conversion on it?
@laudnivek-k94 жыл бұрын
Alverez sells a baritone for around 399 guitar Center have them on sale a lot time for 279
@SaidTooMuchProductions4 жыл бұрын
Ya, I've seen those
@laudnivek-k94 жыл бұрын
Said Too Much Productions I love your experiments. And videos.
@RockStarOscarStern6344 жыл бұрын
Said Too Much Productions Those Baritone Strings are really working & they make your Guitar look like it's strung w/ fresh strings.
@jullev67096 ай бұрын
Best get a 60 oth thicker for low B and move down the other normal 5 strings. No problems with intonation or action at least in my ovation !
@Junior13853 жыл бұрын
You can tune that guitar like Bajo Quinto
@shitmultiverse14044 жыл бұрын
> demo > it's the goddamn 4 chords
@SaidTooMuchProductions4 жыл бұрын
That's what people do on acoustic, I use some 7ths in there too btw
@SaidTooMuchProductions4 жыл бұрын
Also suspended 4ths and 2nds...
@RockStarOscarStern6342 жыл бұрын
Maybe Powerpins would help
@RockStarOscarStern6344 жыл бұрын
Said Too Much Productions Useful, no damage happened to the Guitar at all, it's low lovely Baritone Sound.
@ravelitschimo4 жыл бұрын
Can you do it with nylon strings?
@SaidTooMuchProductions4 жыл бұрын
I dont think they make them thick enough
@ravelitschimo4 жыл бұрын
Said Too Much Productions trying?
@joycesanders48984 жыл бұрын
@@ravelitschimo ..maybe you try? ...I'd think not, but only cause they not making any suitable for that purpose...it be very 'spensive fabricate set...
@RockStarOscarStern6344 жыл бұрын
@@SaidTooMuchProductions They're working on it
@alm0004 жыл бұрын
I wonder if a nylon string could be heard thru a regular electric pick up. I know it's off topic, but it might shed light on the ever present tonewood debate, :) That thing sounded cool :)
@Dr.Turkey4 жыл бұрын
It can't. Electric guitars use magnets which pick up the vibrations of steel strings. They wouldn't work with nylon strings
@alm0004 жыл бұрын
@@Dr.Turkey I believe that to be true but I have never actually tried it, nor have I seen any KZbinr ever try it. I have watched folks do everything else under the sun tho. Don't you think someone should actually try it? You know for the sake of guitar science. Also don't you think it's a bit odd that there are no videos whatsoever of someone attempting it? I kinda figured a guy like Kevin would have messed with this topic is all, Hey happy holidays at any rate :)
@Dr.Turkey4 жыл бұрын
@@alm000 I mean no offense but it's elementary, nylon strings are plastic and magnetic pickups need metal. For what it's worth I have an acoustic guitar with a sound hole magnet pickup and tried putting on a set of nylon strings before and the pickup couldn't hear it. That's why you never see pickups like that advertised for nylon string guitars and why you don't see people trying this.
@alm0004 жыл бұрын
@@Dr.Turkey No offense taken at all. Yeah I was just kinda hung up on the fact I've never seen anyone try it, crossed with being incredibly bored, LOL I mean people try everything on this platform. I will absolutely take your word for it because you've actually done it, Thanks Doc. :)
@SaidTooMuchProductions4 жыл бұрын
You would need a transducer or visual based pickup to pick up something non magnetic. Would nylon strings picked up by a transducer on a solid body sound any different than a hollow? I could try that kind of mod if you think the results wouldnt be underwhelming
@peachmelba10004 жыл бұрын
How long a time period did you take between putting those strings on and recording the demo? Those strings look and sound dead as fuck.
@mtus6474 жыл бұрын
2:00 HEY THERE DELILAH
@NathanielBTM4 жыл бұрын
Hey there Djentilah
@sidgar14 жыл бұрын
You misspelled T H I C C
@SaidTooMuchProductions4 жыл бұрын
Lol
@RockStarOscarStern6344 жыл бұрын
@@SaidTooMuchProductions Wow those Baritone Acoustic Strings really fit.
@RockStarOscarStern6344 жыл бұрын
Said Too Much Productions 1:31 We had to drill out Machine head holes for huge strings not meant or a particular Guitar in the past but that .070 Low B String fits very well into that machine head hole. Acoustic Guitar machine heads more accommodating for Thick Strings (even Baritone Tuning Strings) because Acoustic Guitars implement higher tension to help make it louder w/o the need for an amp which means it's going to have thicker strings compared to an Electric Guitar tuned the same way.
@RockStarOscarStern6344 жыл бұрын
6:18 An instrument not being loud enough might be an issue for if you're playing w/ an Orchestra, or a Pianist or if you're also a Singer w/ a powerful belting voice.
@RockStarOscarStern6344 жыл бұрын
Said Too Much Productions Thicker Strings wow it worked. Baritone Light Gauge Strings are basically like Extra Heavy Gauge Strings. Daddario makes EXP23 EXP Coated Phosphor Bronze would Medium Gauge Baritone Tuning Strings. Baritone Medium Gauge is the same thing as Heavy Gauge because of course thicker strings are meant for a lower tuning.
@otavio0484 жыл бұрын
You look like Abby from Santa Clarita Diet if she started a keto diet
@RockStarOscarStern6344 жыл бұрын
Wow those thick strings actually fit well into the tuning machines because the strings are actually tapered. Acoustic Guitar machines are more accommodating.
@RockStarOscarStern6344 жыл бұрын
2:03 Hey there Deliah by Plain White T on Baritone Guitar
@RockStarOscarStern6344 жыл бұрын
D'addario EJ18 Heavy Gauge Strings work in B Standard Tuning cause the E String is a .014 same gauge as the B String from Extra Light Gauge Strings.
@RockStarOscarStern6344 жыл бұрын
0:00 So there are Baritone Guitars out there, beautiful as they sound, and to achieve that tuning of down a fourth or fifth from standard E they usually extend the scale length and enlarge the body. This is always been the trend when down tuning acoustic string instruments.
@RockStarOscarStern6344 жыл бұрын
Said Too Much Productions Piccolo Bass Strings make your Bass sound like a Guitar so with a normal guitar do famous bass lines up an octave, & get a Mandocaster 12 & now famous bass lines up 2 octaves.
@DeeKeyLP4 жыл бұрын
WHY PIEZO WHAT'S WRONG WITH YOU AHHHH
@RockStarOscarStern6344 жыл бұрын
To record
@RockStarOscarStern6344 жыл бұрын
3:11 Wake me up by Avicii
@l3w1594 жыл бұрын
E
@RockStarOscarStern6344 жыл бұрын
1:51 After all Acoustic Guitars implement higher tension to help make it louder without the need of an amp so it's going to have thicker strings compared to an Electric Guitar tuned the same way.