903 Cubic Inch ProCharged MONSTER!

SME Merch! www.stevemorrisengines.com
To Become a Channel Member - / stevemorrisracing

[@SaddleLight]

Every time Steve said “Big Black Hemi” I was hearing it sung to the tune of “Black Betty” by Ram Jam.

[@leftyo9589]

either that or Shaq! LOL

[@lukk4273]

Whoa black Betty bambalam😂 thanks now it stuck in my head lol

[@Deetroitmuscle]

They should dub it in.....until the copyright police come anyway.....

[@sauletto1]

@@lukk4273 Lol ! Me, too ! Stuck in my head ! 😂🤣

[@sauletto1]

You should get some sort of prize for this perfect comment ! I'm singing it still ! lol !🤣😂🤣

[@daviddiaz3910]

Cleet is going to fly with engine😂😂🎉🎉

[@Make-Asylums-Great-Again]

This isn't for Cleet, unless he recently bought a powerboat.

[@scottyknot7403]

How he sprayed a little starter fluid into the throttle body and walked away was like damn. Steve morris is a legend.

[@christopherkozyra9053]

Did anyone else see the Intake explosion.....Look at the throttle body at 19:00-19:04. Pretty big fire ball in the intake

[@VanKeurenpyrotechnics]

Nice eye

[@Tzk_Remi]

Not only that but could it have been related to the Brake clean that was shot into the intake? Genuine question so correct me if I am wrong please

[@dereklacey1]

I had to zoom in and replay it twice, but I saw it. Lol

[@frankchapp9904]

Name it E Normas.

[@jim5148]

Good one!

[@walterhubicki5207]

Love it

[@Make-Asylums-Great-Again]

That's a BBC of the perverted variety.

[@dangerdave3954]

I feel an oven in Steve's future, bake blocks and aneal that damn gasket in another 30 years.

[@donbrutcher4501]

Run hot water through the block at 15 psi. Thermal and pressure pre-stress. They have lots of hot water off the dyno's.

[@Hanibul_Lecktor]

Don't forget cryogenic treatment, super cool.

[@brianfulwell8397]

Need like a powder coating oven to heat cycle them evenly.

[@donbrutcher4501]

@@Hanibul_Lecktor Worked with that many years ago. Very interesting how it effects even plastics. Golf balls fly farther too!

[@SOMNIOHM]

*_If your a real "car guy" let alone motor enthusiast, this is the dopest channel on the KZbin!_* _Truly amazing content from Steve Morris Engines!_

[@scottmarshall6766]

1320hp NA, 2250 @ 25lbs with conservative timing. I hope when it's ready to see the boat run. Great content, keep it coming. No false advertising here, I learn something from every video. Thanks Steve, Kyle and the rest of the team!

[@barrybaker9677]

I said the exact same thing. Want to see 👀 it in the boat 🚢.

[@davidlewis3169]

Like they say, there is no replacement for Displacement. That thing is a Monster! Can't wait to see what it does Supercharged.

[@Onlyyota]

Agreed

[@AB-80X]

Haha, twin 110 mm turbos on a 5000+ hp 540 says otherwise.😀

[@kcweiberg3731]

​@@AB-80X top fuel dragsters run 10,000hp HEMI's

[@AB-80X]

@@kcweiberg3731 Why are you telling me that? I'm well aware. They are 500 cid.

[@real_talk8749]

The 351 cleveland's head airflow is about the only quasi replacement. Massive cfm and the spark/fuel to balance it

[@chadkent1241]

C'mon Steve, leave some CFM for the rest of us. That is awesomeness

[@bryantg7641]

The machine work on those heads is incredible !!!!!

[@tdg911]

Beautiful work of art. I'm not into racing or engine building but I always walk away learning something from your videos and for that I am very grateful. Thank you. I came across your channel from that monster Haas machine that was damaged and here I am watching all of your videos :)

[@murraymlonsbaryl8512]

NA Horsepower -- 1,645 25 lb boost - 3,362

[@seancollins9745]

I bet it . makes more than 3500 at 25psi

[@RingTuned]

That would be a little depressing to me but then again I do small engine stuff versus his big engines if I made 1600 horsepower I'd expect at least 3,700 at that boost level but there's probably factors that I'm not taking him that only apply to Big engines like on cars I don't know what his typical timing retard per pound of boost is I don't know the efficiency of the ProCharger so it's possible you're dead on

[@robertashton8533]

Na 1400...boost 3535

[@jkfonyi]

The problem is gonna be the procharger not being able to supply enough air to create 25lbs of boost . The biggest procharger usually goes on a 540ish cubic inch engine . That 900 inch engine is just gonna swallow that like nothing . It will make power that sounds crazy for only 10 or 15 lbs of boost . Remember boost number is just a restriction and that bbh doesn’t have much restriction .

[@laurean5998]

1645hp at 6500rpm is not going to happen. More like 1245

[@jonathonvince561]

Its soo cool to see Joe working on this. He did my coyote heads in 2019 and they are still gamgster 5 years later 💪✌️

[@krbruner]

I used to work for a company that made airplane deicer trucks and some of the models had this system that used a hydraulically power ATI Procharger that looked about that size, but maybe larger, that pushed air down a nozzle to blow the ice off of planes. I was told that the blast of air could blow your feet right out from under you. They were really impressive. They had a cart with an engine at the other side of the shop, where they would break the Prochargers in before installing them in the cab on the boom. When they ran them in, it sounded like a jet engine running.

[@jsomething2]

we have a Global and a vesta guard. never heard of a air deicer. that would solve the hassle of dealing with waste glycol every year thou. who makes them?

[@krbruner]

@@jsomething2 Global Ground Support...it was called AirPlus system. It was supplemental as they still had the deicer/anti-icer cannon as well.

[@jsomething2]

@@krbruner that's interesting.. must be useful in the much more northern areas where they get lots of snow.

[@user-cu2gp4jj3c]

903 CI procharged hemi before GTA 6 is crazy

[@austinmiller8695]

Steve needs a auto clave of some sort, he could aneal those gaskets and heat his blocks up to retorque

[@andrewbarrale2691]

I used to run water from my hot water heater into the engines to heat them up on the stand. Very cool looking project.

[@BryanWaldo]

Tyrone seems fitting

[@hitempguy]

Your video editing has become so good, the channel is as entertaining to watch as Cleetus now

[@SStudiopro]

I wish I could rent a room there just to be able to watch these guys. I so much miss building race engines.

[@regal105]

I’d call it angus.

[@patrickthomas8736]

I had no idea that copper needed to be annealing. I been in manufacturing for over 40 years. I just learned something. Thank you Steve!!

[@vehdynam]

What an engine and very pretty as well. 1200 and 2450 hp on boost. Thanks.

[@lance4217]

1,110 NA, 1,960 @ 25 LBS, Pump Gas Definitely the Limiting Factor, Great video Again Steve🏁🤙🏼

[@jagharingenyoutube]

If it only makes 1960 on 25 psi then there is no point in running 25 psi

[@mikescherrer4923]

@@jagharingenyoutube😂 You don't know what you're talking about. Show me your 2k hp on pump gas, bro.

[@jagharingenyoutube]

@@mikescherrer4923 so 2153 on 20 psi. Tell me why you know what you are talking about?

[@Make-Asylums-Great-Again]

@@jagharingenyoutubecould you tell us your qualifications?

[@Make-Asylums-Great-Again]

@@mikescherrer4923list your qualifications Mr. know-it-all

[@michaelmcclure8673]

Steve when my boat was built back in the day . She was sporting a Keith Black hemi with a Littlefield blower on top. 😮

[@darksu6947]

Why didn't you run the Bigfield blower? 😂

[@robertwest3093]

I do that to words all the time. I’ve got my wife doing it now 😅

[@michaelmcclure8673]

​@@darksu6947 I guess you've never heard of a Littlefield blower . Make all the fun you want . The setup won it's category at the world of wheels that year. 😊

[@darksu6947]

@@michaelmcclure8673 My condolences to your sense of humor. It will be sorely missed.

[@scottyknot7403]

Love the video and just the knowledge bomb that is always dropped. To the basic mechanic to an engine builder you always have a great piece of advice to add. Keep up the great work!!!

[@jasonstormoen]

That Bbc with Sonny's hemi heads is bad azz... I have been wanting a Sonny's Bbc Brodix block with Sonny's aluminum water hemi heads and a f4-136 procharger in my 88 Monte SS that's a street driven drag car.

[@How.Dare.You_Biden]

call it Mandingo...

[@danw1955]

Now that right there is FUNNY!!🤣😆

[@beeeennnnnnn]

LMAOOOOO

[@BenJohnson-sf5xl]

Really I have to say Jaffa and the Toyota won't be coming back soon enough but it's still a little self conscious but I'm worried that the next car will have a good time and money for ice cream or something

[@ravenbarsrepairs5594]

Copper anneals the opposite of steel. To anneal the bad head gasket, heat it up and rapidly cool it.

[@johnnydanger57]

Actually copper anneals when heated red hot, how it cools doesn't matter. A quench "will" remove some of the oxides though. Look it up if you like.

[@minigpracing3068]

I was going to mention a big rose bud torch should have been able to anneal this gaskets.

[@dazaspc]

@@minigpracing3068 I have done this on big copper hydraulic gaskets when there were no replacements available. Didn't have a problem afterwards.

[@trevorsmith9251]

The 903 Cubic Hour Engine 💰💵

[@johnnydanger57]

@@minigpracing3068 That would have done it. Rolling and stamping copper sheet work hardens copper. So, all copper gaskets should be check for softness.

[@AndrzejCzarny-un8ke]

Little slip up toward the end saying it will be running on gas down the street from Bradenton. Congrats Cleetus/Eagle. This will be a BEAST!

[@neilallen2144]

1440 N/A, 2852 @25# Put my rifle cartridges through an annealing after each firing. Keeps the neck tension consistent.

[@martyfarrell9459]

1180 N/A, 2330 @ 25 pounds. What a beast of an engine!

[@Nebbia_affaraccimiei]

hope you are right because i happened to guess really close to u lol

[@loganb5657]

Cleetus needs this for eagle 😂

[@brandonchevy6772]

It’s most likely for Eagle, with a smooth cover story.. 🤣 93 is for Drag and Drive

[@jefferywells2288]

I have been waiting for the "Big Black Hemi" start up! Great video, great work all of you guys.

[@davidadams7352]

That mountain motor should be called “Everest”

[@keithcarpenter5254]

Annealing is a must. Every time you handle it, the copper is hardening, so we used to anneal copper gaskets immediately prior to installation. 😊 oven gloves to put it on the studs, immediately prior!

[@wilschell9984]

Call it "The Green 1/4 Mile" from the 1999 movie. Big black guy and also is the boat doing 1/4 mile runs.

[@franksprecisionguesswork501]

John Coffey. RIP Michael Clarke Duncan

[@Make-Asylums-Great-Again]

Rip

[@gregorypfeifer9117]

Have you thought of using a thermolator used in injection molding machines for heating the engines? They heat/cool water and circulate it through molds, one might be worth looking into for engines, could double as a leak down test for gaskets as well.

[@jimmypatriot5203]

That's a massive motor 😮 liking the content brother!

[@anthonyjohnson100]

I need this motor in my 15’ whaler

[@Make-Asylums-Great-Again]

Best advice: buy one

[@scotthultin7769]

GM made a 637 cubic inch big block and had 5 and 1/8 inch bore Shoot for the moon Steve

[@GreenDwarve]

637 or 632?

[@juliusallison6561]

The biggest gm makes is the 632 bb

[@jondahl3173]

No, talking about the old truck series motors from the sixties.

[@jimmyschock9395]

in diesels they cut the gasket back for the fire ring to seal the combustion chamber, or use a single "o-ring" in the head on top of the mls sealing surface.

[@dlrwirelesspro]

Putting that big block cam in that engine cam bore was like throwing a hot dog down a hallway. That's a big engine.

[@Make-Asylums-Great-Again]

My ex-girlfriend could relate.

[@diernosaj]

I would call that thing "Black Betty"

[@Agent-mb1xx]

I'd want one in a Pantera

[@negativeindustrial]

That’d be a sick car.

[@rnts08]

A 72 Pantera, preferably satin black. Dream

[@Agent-mb1xx]

@@rnts08 GT5-S gonna need the wing

[@AB-80X]

I think that little Pantera would feel incredibly violated if you tried to stuff this thing into it😀

[@wjeric]

This is so cool. Your videos are so fun to watch.

[@ts302]

Great video Steve & company!!! NA = 1035HP, Boosted = 2200HP

[@richardpauza2075]

Cool Vid on the Big Black Hemi..! But, I Can Not Believe For as Long as You Have Been Building Engines You Never Anealed Copper Head Gaskets with an OnA Torch... 😮😮😮😮

[@austincassell4741]

It's probably too big of a surface to get a consistent heat on it and the gasket manufacturer probably knows a lot more about it than Steve. And if he misses a small area and then the owner torches the gasket Steve's gonna have to be like "well I tried to fix some messed up gaskets" In all reality this whole engine build seems like it was messed up 😂

[@Roelasia]

@@austincassell4741 exactly

[@timmummert63]

That thing is a beast!

[@richardpauza2075]

@@austincassell4741 Its Not Hard, Its Not To Big, Racers have been Annealing Copper Head Gaskets At the Track For 60 Years. Soot it Up with Straight Acetylene, Then With a Rose Bud Bring in the Oyxgen and Burn off the Soot. Air Cool. It will be Dead Soft. A group of Racers Saw Garlits Doing This and He Accedently Drop it in a Mud Puddle, So A Group of Racers Started Doing the Same...😁

[@D95SI420]

@@richardpauza2075 totally agree with this, watched my dad and grandfather do this all the time, i have a pretty awesome new school method using my lab heater box with some custom add ons:)

[@Realistic-American-Reformer]

Great video! Thanks Steve. 1650hp na 3420hp on boost

[@zachknell8125]

That engine looks awesome! Going go run hard all day I am sure. Bet it makes 1197 NA and 1854 boosted. Can't go to crazy since it will run higher throttle all day, not just a few seconds at a time. Would love to see the boat this thing is going in!

[@johnbujalski8602]

If its ocean water cooled with a elevated saline content you can probably add a hair more timing because of reduced coolant temps. Im going 1198 NA and 2149 on 25lbs. 2275 in cool salt water

[@erikcourtney1834]

That hemi looks so amazing.

[@robingray9634]

1230/2870 hp I learn something every time I watch your channel! Thanks Steve and crew.

[@EliteMacFreak]

You and I must be thinking the same thing, which is about 80% of theoretical max.

[@thewhat1214]

You the man amazing build!

[@zrxdoug]

"Norman." Why I genuinely love Steve Morris..

[@taylorpratt6287]

Steve I used to build boxes to heat parts up, it helps heat up the item faster as it helps hold heat in and then you don’t have to direct it at the part as much. Might help with heats engines up faster and more evenly. Just an idea. Love the channel

[@bigskunk801]

The thing about copper. When it’s worked or bent or rolled etc. it naturally hardens. So a thick slab of copper rolled to a few MM will be harder than a thinner slab rolled into the same thickness. That’s why copper pipes, wire are made in the foundry.

[@mrsimo7144]

Proudly powering a cruise liner near you. 🤘

[@torque7025]

This startup and the second pull gave me the biggest smile. If I were to put this diamond of an engine in a boat, I would name it "The Lung" and give it "a brother" :)

[@chloehennessey6813]

Seen a twin turbo 1005 CI Sonny’s. This will be cool. 3:49 Oh yea! Blasphemis Hemi has fought Finnegan every step of the way. So we are awash in how much trouble and white hair a Hemi can cause.

[@danw1955]

Man, what a monster! When you showed that gasket after the head had been torqued on it, I pretty much guessed that gasket wasn't annealed properly to soften it up. We used to do dirt bike head gaskets like that, and had to take a torch to them until they turned colors and drop them in a pail of water. I'm guessing with a good tune, N/A, you'll be seeing around 1145 hp. and on 25 lbs. of boost, around 1615 hp., maybe a little more? Let's see how close I get.😄👍👍

[@kennethandersson991]

What a gem! Love that engine! NA 1011hp, 1788hp with 25lbs boost.

[@Make-Asylums-Great-Again]

Pitiful😢

[@douglasmayherjr.5733]

If you Dyno all your engines. Could you install a small water heater or boiler on your cooling system to warm up the engine for head torque and stabilize operations until it was producing heat on its own. Would be faster than heat guns. Manufacturers Testing Facilities have something similar. Thanks for the videos, Steve.

[@michaelswanson7881]

I put a copper gasket in my "slightly modified" Yamaha RD350LC, it had to be heated cherry red to anneal it before installation.

[@adamspeck3162]

Hey Steve, I believe all it takes to aneal copper gaskets is heat the copper to glowing and quench in water. Opposite of what steel would do.

[@BenjySparky]

Steve and Kyle, y'all rock! That's one big black hemi. It's a monster. Peace

[@ryandeweese363]

Deff a monster build! Hey I noticed the copper colored valve seats,berilium? Saw some cylinder head porting clips were fella had copper exhaust and Yellow intake seats... Any idea what's that about

[@yarrdayarrdayarrda]

9:35 Is the bellhousing mount to the jet drive not positively secured to eliminate any forward/aft movement of the engine? I would think the front mounts only need to provide vertical support and twist elimination, not front to back movement.

[@WireWeHere]

Building yourself an oil tank with a heater and circulation pump complete with secondary filtering oil inspection etc.. rig to pre heat soak engines might not warm up the shop as much as air heaters.

[@Justin_lucas_]

I’m going to say 2130 HP boosted!

[@fullsendmarinedarwin7244]

When you shown the big block cam in the journal like a hot dog in a hallway, all I could think of is “this is you, this is who she says not to worry about” aka the big black hemi

[@planesofpaper]

We once drove a 413 dodge commander all over the States. I thought 7.2 Litres was huge. The liters on this Hemi is off the charts. Average engine size in NZ would be 2 litre. Crazy what you get to play with.

[@tptrsn]

This is a fun engine build! So unique.

[@colbywhitehead4260]

Do I think I will ever be able to afford a SM engine... Probably not. But I sure as hell love watching this man, and his team work. I love this channel 😁

[@atlasintegrations4114]

Are your improvements to strengthen the mounts putting the mount too close to the header? Would the header transfer heat to the mount back to the block and into the haul?

[@looneylonzo28]

i’m old-school is still run copper gaskets I’ve never seen a gasket that stiff that roller copper that that came off of the metallurgist screwed up. I bet you there’s a whole bunch of those gaskets out there someone probably tested the hardness and said it’s close enough SMF. Good thing you caught it. That would’ve been a lot of extra work.

[@tsimpson007]

Being a big time Hemi fan. I love this black hemi. Steve every time you say black him I keep hearing the song black Betty.

[@bradley3549]

Steve needs a little oven like used for powder coating that he can just wheel the block and stand into to bring it up and soak it at operating temp without having to think about it.

[@truckladders4104]

Great Video Steve, You may want to add a bridge reinforcement to the outside of the engine plate on the left side mount. Even a small gap that is not supported can be a stress riser you have done such great work on everything else why take the chance! just my opinion and i tend to "overbuild" for ultimate strength!

[@xtr3m3fLx]

ya as soon as I seen that gap I thought to myself 'yup, that's a problem waiting to bite on race day.'

[@willspeed4585]

Material application issues on the head gasket. Normal teething pains when you run on that knife edge. You go Steve!

[@barrybaker9677]

I like your timing light ❤

[@jaredcissell1454]

Is the bore on that hemi being huge making the surface area of the fire ring large enough to cause the clamping force to be less than what's needed to crush the gasket? I wonder if you put the same gasket on a block with a significantly a smaller bore if it would have crushed fully and sealed up. Just a thought

[@Musick15]

1247hp NA , 2032hp @ 25 LBS. awesome video Steve.

[@710performance]

I remember seeing this in the shop in person, it's wild! and the boat it goes in is wild!

[@dereklacey1]

That’s crazy awesome!! How much would that engine cost??

[@KomodoPrazision420]

1200 NA 3200 Boosted 🙏Been watching since I was in middle school and found out about the devel sixteen, love how interactive and informative your content is.

[@Badgermatt-nc5nr]

You should watch marketplace for a powder coating oven that you could use to heat engines. Bonus being, you do powder coating for things that just need a quick shot of color.

[@bryanrice2741]

Sooo. Curious would a simple stand alone hi-heat water heater , with a universal reciprocating plumbing connection system that would heat the block internally be some cheap insurance along w/ the blast heaters ? just asking , cause I would think you could really heat soak EVEYTHING as well as check for leaks .

[@throttlebottle5906]

"Bankruptcy" seems a fitting name. lol

[@waynecreech]

I love the Chevy bellhousing pattern on a Hemi block! way less hassle to stuff a Turbo 400 behind that beast or whatever outdrive stuff in this case.

[@AB-80X]

Look, this is basically a hemi because it has those hemi heads. But it has nothing to do with a Mopar hemi.

[@MartinMcMartin]

That header coating must be pretty good stuff.

[@DataypeX]

@14:45 I about feel out of my chair when you named it. (that's my name. LOL), but I just go by Norm. hah!

[@technicallyeco.2751]

That procharger is massive 😮

[@dmeemd7787]

1170 HP - NA // 2850 HP Pro-Charged

[@wolfcommander6009]

That lower pushrod angle looks flat...how will it oil that lifter...super pump or is it thru the pushrod with pressure

[@patriot2164]

Black Beauty 1079 NA / 2350 25lbs boost @ 6500 rpm tops

[@bryanclements7394]

Would it be plausible or beneficial to put together a system to circulate heated water or coolant through the engine to simulate running the engine instead of using the heaters?

[@keefershotrodshop]

Glad to see this big engine running! Darth Hemi?? I'm guessing, on 93 pump fuel, 1169 HP N/A and 2493 HP at ~25 lbs of boost.

[@fatbelly3385]

That is one massive masterpiece