Riello oil burner running funny

[@johncampbell6715]

Expansion vessel needs air rather than replacement. Naughty boy Steve.

[@Hubjeep]

22:03 "I know how you are!" HAHA!

[@johngibbs5019]

should have checked burner operation after you replaced the nozzle . i've been servicing Riello burners for more than 25 years and can count on one hand the times i've had to change the Programmer or cad cell. In my experience when Riello burners fire this way , I change the nozzle and knock the air back a bit and 99 out of 100 times this solves the problem. A quick way to check if it's over aired is to put your hand over the air intake in the rear of the burner while it was trying to fire then gradually take your hand away once the chamber has heated up sufficiently usually it will continue to run but i always replace the nozzle and adjust the air gate and take a smoke test to make sure i'm still at 0-1 smoke .

[@jspinosa50]

Thanks for the info I will try it. I do always replace the nozzle every season.

[@rognevs5695]

Bingo, stop start 9 times out of 10 over aired, poor combustion on start up, I’ve replace one Solenoid in 20 years. Set at 11% co2 +/- 0.2

[@chrisoriel4823]

Thanks John. Saved me a lot of time. I bet a lot of unneeded parts get swapped on Riellos when they fire like this.

[@graniteridgegreens6278]

Yes I was looking for the nozzle and photo light check before replacing the control modual. Big money maker taking them and just changing the cad cell after then hit the customer for a used modual!

[@graniteridgegreens6278]

John Mine is shutting off after 2-3 second burn, figure nozzle and or photoeye dirty? Runs with bad burn when I restrict the supply air intake.

[@Fireship1]

Nice job Steve. Doesn’t matter if it’s a Riello, Carlin or a Beckett. In the end, we make money keeping them running!

[@thomasalbert8605]

I work on a lot of boilers with riello burners and find a lot of them that act like that are the photo cell. The riello photo cell tolerances are much different than the regular cad cell eye tolerances. Good fix

[@zack9912000]

Hate working on them at times always some strange occurence with the cad cell, constant issues with new units. Have 3x as many no heats with their burners then others

[@catslivesmatter1268]

When we say REALLY to customers , translation is ( okay yeah okay whatever ) just making small talk so we can get done and collect our Cash 🤣😂💜💯 $$$$$ in my pocket for the next day lunch

[@Hubjeep]

Can just the cad eye be replaced?

[@Pentti_Hilkuri]

@@Hubjeep The cell is detachable and can be pulled straight out.

[@catslivesmatter1268]

@@Hubjeep absolutely but it is not a money maker to do it out in the field

[@josephfalletta9853]

I realize how old this video is but the issue was the crusty head over the nozzle. I had this happen to my riello burner and I believe it gets so crusty that the photo cell can't see the flame anymore. It was short cycling and I got it to stay on just by removing the buildup.

[@jeffcoolhd]

Steve when you said I know how you are to your customer he must be tighter than two coats of paint. Peace brother and Molly

[@bobt4949]

I love the breaker baa for the expansion tank. Those things are a pain in the ass. Always in a bad spot.

[@toadroller]

10:06 using the fuel line to snug up the bleeder, letting the rest drain until *just* up to the bleeder and then tweaking it shut with the wrench. There's an experienced craftsman. I learned something today.

[@johncampbell6715]

You didnt need the control box just the photocell.

[@XorkHeartXenu]

I think this is the first time I have heard anyone in this century actually use "Queer" the old school way that isn't intended as an insult.

[@Hubjeep]

He said that in another video too, I LOLed! I may start using it.

[@Nighthawke70]

It IS a weird setup. Seems to be something only someone from out west would do who is wet behind the ears when it comes to boilers, straight out of a catalog.

[@kylebass4635]

Yep I was watching a old Christmas movie and the husband tells his wife I rather like that outfit on you it looks nice and gay and she replies that good because I feel very gay today. This generation would never understand.

[@blipblip88]

Man I love Steve's videos. I'm an office-worker, but after watching a couple thousand of his oil burner videos I feel I could change professions! Also, I'm SO SO SO glad I have forced hot-air furnace, has had minimal maintenance, that is over 35 years old and works a charm!

[@douro20]

What engine is in that step van?

[@stevenlavimoniere]

international mt 275 diesel

[@patrickm3534]

That was a Caleffi Autofill and backflow preventer,

[@euginemiller7760]

smile your on candid camera

[@edhosmer5665]

Steve where did you find your cheat sheet

[@johntrauger68]

Sunny day 35 degrees not so bad. Stay warm from Florida!

[@PaulDziomba]

Pretty slick setup there. Great video!

[@zekenzy6486]

Great Video. I was watched this video before I go sleep Good Job Steve ^_^

[@Geo24400]

Thank you Steve, for your knowledge and down to earth wisdom. I have learned a lot from you.

[@deansilver1864]

New nozzle too~( owner checked it) 😉

[@Newberntrains]

hahahaha those damn blue tanks love going bad with ya there steve :)

[@leslieorm4905]

I'm curious as what kind of diesel motor you have in your service vehicle? Sounds like a caterpillar?

[@jspinosa50]

I have a rattling noise in the burner. Any ideas what it could be ? does sound like this video

[@kylebass4635]

Everything around me is Beckett or old school Wayne burners.

[@J-Colt]

Thanks for video Steven. Nice seeing something other than Beckett this time.

[@Hubjeep]

11:52 Mine has carbon on it too! Why?

[@Hubjeep]

27:27 I would have kept the 29th just to make people wonder and it is leap year!

[@tucobenedicto109]

If it gets serviced on the next 29th, it's once a year!

[@65csx83]

@@tucobenedicto109 The next 29th would be a month or 4 weeks, if you prefer.

[@johnkenny7877]

nice videos buddy ,,,, friend from Ireland

[@jspinosa50]

I don't understand why no one put a shutoff ball valve between the expansion tank and the system. It makes things so much easier when changing the tank. No bleeding necessary for a few bucks.

[@josephdriscoll8527]

more than a couple of bucks but I would sell the valve and fittings as much as possible with the explanation the labor is going up in the future and one valve is going to save money next time ,plus on the yearly you can check pressures

[@patriciamariemitchel]

Molly and the Heavy Hitters. Good name for a book.👀😃

[@johntrauger68]

I like boiler work. Especially oil. Made a few bucks doing it as side work.

[@robertborchert932]

Had to pause the intro once I heard, "gonna have to give the old 'how ya doin'". Awesome!

[@Hubjeep]

Biasi B10! I have the same unit.

[@ChuckKarl525]

You should have your own TV series and make da big bucks

[@douro20]

Can't have an expansion tank that is more than a certain age?

[@davidfeldbauer7970]

Test pressure. Nozzle size. And combustion.

[@scottk0623]

Great you got the tool in the mail👍

[@ThePete2432]

Some of your customers are certifiably crazy

[@johncampbell6715]

Photocell needs replaced. These Riellos are great burners but very different from the 40 year old tech you use in the states. Time you caught up.😁

[@kdmq]

Pressure reducing valve for a feeder lol, that's a MacGyver type of thing.

[@andrewcolley7032]

would have changed that relief valve too. pretty good chance of a call back once they open and fill up with sediment. not a fan of riello burners. Beckett or Carlin all day. Good job mama

[@paulgilliland2992]

Parts cannon boom !!!

[@resellingmaniac5035]

I was talking to my brother in-law today and he mentioned that he had his boiler serviced last week. He showed me a list of shit the guy said he did. He said he replaced the CAD cell and the igniters. I asked if the boiler had stopped working . He said no it was an annual service the replaces them every year.

[@44R0Ndin]

That's an expensive way to keep an oil burner running. We had a new one put in over 10 years ago because the old one cracked the liner and almost burned down the house (old unit was from the 70's, came with the house which is around that old). Been running flawlessly ever since, only thing it's needed is a new expansion tank and relief valve (we have hard water because we're on a well, so the relief valve quickly filled up with deposits and wouldn't hold rated pressure anymore).

[@jspinosa50]

@@44R0Ndin NO way do you replace cad cell unless it doesn't work!

[@donaldallison]

Looked like a fast drive to the job.

[@MattyWill1]

This guys the God of plumbing/ heating & air..✌🍻

[@MrHowieZ1973]

I think that feller wanted to be your apprentice :)

[@donnierobertson3088]

Good job

[@Sctronic209]

Never worked on a Riello.

[@jblyon2]

The ones Steve films all look needlessly over complicated

[@damanwazhere]

Good vid.. when i fart it expands around the room .. 😁

[@Martin-pr6ps]

Reillo the best burner in the world and and the easiest to repair

[@zack9912000]

Will take a Becker burner any day over that.

[@Hubjeep]

Funny, I hear people say they would rather take a "simple" Beckett. I have only worked on my family's Riello heads. One needed a fuel pump due to drip, rest just need nozzles.

[@zack9912000]

@@Hubjeep when you work on them for a career and you see how shitty of a design they use compared to others and unavailable parts at supply houses requiring special orders. Their controls fail on a regular basis, the cad cells trip when there is no issue and so on. Plus these odd calls are normal for riello burners. Work on the hundreds a year as I do and you wouldn't have that opinion.

[@Martin-pr6ps]

@@zack9912000 everyone is missing the point here. The easiest to repair think about it more call outs fast fix fast money and everyone is happy

[@zack9912000]

@@Martin-pr6ps real life doesn't work that way. More callouts for a pos system that constantly fails, eventually the customer blames us. Customer wants a reliable system not a plug.and play on parts for repairs. No company wants to service problem child equipment. Customers want it fixed once not 2-3 times a season, then I have to waste even more time on warranty paperwork instead of running other calls. No matter how plug and play something is, if I having to spend time on several visits to the same home each year for different failures and 30-45 mins filing warranty paperwork when I am loosing money and customers. These systems are junk and a pain in the ass for repeat calls because of a retarded design

[@bobgallo2178]

Good fix, Steve. Reillo burners are not my favorite.

[@jasonsquirrel3820]

Change nozzle from .50 70A to .60 70B know it makes a boom sound when ignite

[@rockyethridge7272]

Steve tell that guy to shut his yelper. If he knew how to fix it he would've 😎 Great Video Moma

[@Nighthawke70]

Just touch the ignition coil to the palm of his hand. He'll get the picture.

[@mrjason9382]

Nice

[@Ratman_Bejo]

nice ....how ore you frend my name is Ratman supplier oil burner from indonesia

[@Hubjeep]

16:02 Japanese??? It's Italian!!!!! :D

[@danielbell7844]

The pizza burner strikes again !

[@yvonfem]

Steve your motor don't half rattle

[@bossmantrucker656]

Hmm 🤔 I wonder what I can take lol 😂 Peace ✌️

[@iancampbell582]

Great burners keep the oil supply clean and they run for ever. Oil pump is the weak spot with the pin wear.

[@JisINSANE3]

These Riello burners look over engineered, And different simply because they can. Kind of like a BWM. I like a simple and reliable beckett.

[@zack9912000]

They are one of the most unreliable pos designs I have ever ran into

[@notajp]

Looks like the engineers were trying to justify their salaries with these.....

[@JisINSANE3]

@@oilburner9989 currently staying warm during this nor easter with my Beckett AFG going on and on with no problems.

[@Martin-pr6ps]

Steve the first thing you should have done is check the oil pressure in the pump. I notice in your service videos you never check the oil pressure

[@GoatzombieBubba]

There is no oil pressure.

[@Sctronic209]

Yes there is oil pressure. You can adjust it. Most of the time no need to check it.

[@Martin-pr6ps]

@@GoatzombieBubba what are you talking about every oil pump had to be set to a certain pressure. You connect your mercury oil gauge to the oil pump to check the oil pressure. Every oil boiler has different oil pressure and air settings according to the boiler size and output.

[@Martin-pr6ps]

@@Sctronic209 I'm fully trained in oil burner service and commissioning boilers the first thing you do on any service is connect your oil pressure gauge to the oil pump then you go to your boiler manual and set your burner accordingly. That way you adjust your oil pressure and air inlet for best combustion and efficiency depending on what type boiler and burner and boiler size etc etc. Well that's how it's done in Europe anyway.

[@jeffcoolhd]

Martin you must have ran to the refrigerator to get another beer while watching Steve video because he did do a oil pressure test didn't you see when he loosened the bleeder with the hose on it that's how you tell if you have good pressure. Peace

[@greg778123]

Steave it broke his wallet not his hart 😂

[@billsherman6129]

Solenoid, not selenoid.

[@stevenlavimoniere]

close enough for this neighborhood

[@dosgos]

@@stevenlavimoniere hahaha. Good enough for this town!

[@raver_90]

steven lavimoniere great accent bruv, I got ya and I’m on the other side of the pond in little ole England, use to love working on riello burners, about 99% of all oil fired boilers here run on rielllo burners

[@dwight.bennett]

Ha, I had captions turned on, and it translated it as "silly noise" valve!

[@robertrobert3740]

Looks like a close call you had me worried, working without your gloves for a brief moment looks like you made it through it, just take a deep breath you'll be OK....☺☺😮

[@robbierego1616]

Cheapo garage feeders

[@markpowell1031]

3rd comment

[@tomvanacore3592]

First