How To Adjust The Belt Tension On A Riding Lawn Mower

How to tighten the belt on a ride on lawnmower tractor and make it cut like new again. Includes John Deere, Husqvarna, Craftsman etc.
✅Click here to buy a new belt ➜ amzn.to/2JmuKqo
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
For more videos like this, check out:
👉Clean Under the Mowing Deck on a Riding Lawn Mower ➜ • BEST WAY To CLEAN Unde...
👉How To Un-Seize, Clean and Grease a Sealed Bearing ➜ • How To Un-Seize, Clean...
👉Remove The Mowing Deck From a Riding Lawn Mower ➜ • How To Remove The Mowi...
👉How To Install A Belt On A Riding Lawn Mower Tractor ➜ • How To Install A Belt ...
---------------------------------------------------------------------------------------------------------------------------------------------------------------
🔧WELCOME to the Steve’s Small Engine Saloon KZbin channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
---------------------------------------------------------------------------------------------------------------------------------------------------------------
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepair #smallengine #repair #diy #troubleshooting #howto #engine #howitworks #doityourself #lawnandgarden #ridinglawnmower #johndeere #husqvarna #craftsman

[@StevesSmallEngineSaloon]

✅Click here to buy a new belt ➜ amzn.to/2JmuKqo For more videos like this, check out: 👉Clean Under the Mowing Deck on a Riding Lawn Mower ➜ kzbin.info/www/bejne/iKG4g3-NhbN8Z9E 👉How To Un-Seize, Clean and Grease a Sealed Bearing ➜ kzbin.info/www/bejne/Znubq2CkbMl8hck 👉Remove The Mowing Deck From a Riding Lawn Mower ➜ kzbin.info/www/bejne/m4LPeIWifqmWeZI 👉How To Install A Belt On A Riding Lawn Mower Tractor ➜ kzbin.info/www/bejne/i5i6ZZqZhaaKf9U You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon

[@poofypoopy8838]

I have a John Deere 120 and it rides slow. Is there something I can do to speed it up a bit. Its almost like there is a governer on it. Awesome channel buddy!!

[@TheKillabraze]

Is it possible that the tractor wont start because this belt is loose

[@henry.duck.3924]

Can you show how to adjust on a E110. That model does not have the adjustment bracket.

[@keithpage6461]

@@poofypoopy8838 belt is srteched Ipu zanther ome o it

[@robertgilbert5369]

poofy ernesto aaaa

[@coolbyrne8676]

I got charged a stupid amount of money the last time I needed the belt replaced, and I said that was it, never again. I've been learning how to do these small things myself, and not only does it save me money, but it's really satisfying knowing I can do it. Your videos have really given me confidence to give these things a try. Thanks!

[@StevesSmallEngineSaloon]

You're Welcome...

[@ralphmowery2898]

I understand why the shops charge what they do, but it is often a lot of money that Steve and some others have saved me by showing how to do the simple things.

[@Kevbo4]

I was having trouble with this until I added beer. Now things are back in working shape!

[@jamescaron6465]

“You need a 10mm wrench”. Assuming you haven’t lost it already. Seriously that’s valuable information. A loose belt will wear so much faster and possibly break. Always when it’s 95 out

[@chuckg2016]

Thank you much! My belt mysteriously is suddenly too loose & won't engage. You just gave a clear and comprehensive fix with the adjustment to the spring.

[@StevesSmallEngineSaloon]

Great to hear!

[@buddysambo]

Thank you Steve! I'm not mechanically inclined but I have a lot of yard, and my blade stopped working this morning. Watched the video, you explained it all perfectly, then I went out and fixed my own mower! You're the best. Cheers

[@StevesSmallEngineSaloon]

You're Welcome...and Thank You...

[@markbeck3115]

@@StevesSmallEngineSaloon I have the john deere 105 and the bracket is welded to the deck , no bolts to loosen to adjust!

[@carlbaker8606]

The belt keeps coming off of my Snapper. Had no idea I could adjust the tension. It's fixed! Thanks Steve!

[@StevesSmallEngineSaloon]

You're Welcome...and Thank You...

[@bethanyure6694]

I'm from New Zealand, and I have my own lawn and garden business. I really must thank you sooooooooo much you have saved me literally thousands on repairs for machines as well as maintenance.! Instead of taking them in, it has been fantastic and empowering to now do almost everything myself but how everything is simple with you, there's no huge jargon blub about what's wrong, is fantastic. Short and sharp FAQs nice and simple.! Thanks so much again.

[@StevesSmallEngineSaloon]

Awesome! You're Welcome...

[@kennethsonier1766]

I'm going outside right this minute to adjust my belt, thank you for sharing this important information Steve ✌️🇺🇲

[@StevesSmallEngineSaloon]

You're Welcome...

[@corybrown4667]

You had me at “beer”.... and I don’t even drink, but I love good comedy.

[@StevesSmallEngineSaloon]

Right on

[@eddiecastelin8341]

Great help, just noticed mine pausing for a few seconds, now it engages quickly. You are an ace.

[@StevesSmallEngineSaloon]

Glad to help Eddie....

[@IsmaelByrd]

very good tips. I lost the owners manual and don't want to pay $20 to be able to download it. There are archived versions of my model mower but they don't say how to adjust a 42" deck, only the 48". So this was great. However, i wanted to point this out as a NOTE. If you adjust the tension too much, the blade will actually engage when you turn on the mower, so be wary of that. I had to readjust about 1/4".

[@taffitabing]

Those of you who are making the "RUDE" remarks to this man, shame on you. I am very thankful Steve showed me how to check the tension on my Craftsman mower. If you people do not have anything nice to say then don't watch his videos. RUDE people in the world make the rest of us look like geniuses. Thank you again Steve!

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@budgates3509]

How do you adjust blade belt on 145 automatic

[@lexingtonguyhere]

I absolutely agree Sassy. Thanks for making your comment.

[@christopherfisher123]

They must me Democrats!!😂🤣🇺🇸 🇨🇦

[@otallono]

@@christopherfisher123 always

[@jyrbr9292]

Thank You Steve for All You teach Us !

[@StevesSmallEngineSaloon]

My pleasure!

[@BeBreezy-zg8fl]

I accepted your beer challenge but accidentally went through a case of beer and never finished the repair.

[@kevinmartin4867]

I'm new to ride on mowers and trying to help a family member "tune up" his mower. This was a great way to introduce the drive system and a job that was definitely needed! Thank you Steve!

[@StevesSmallEngineSaloon]

You're Welcome...

[@rstoertz]

Steve, you're the best. Here's a few tips that might help your viewers: 1) If you run out of adjustment range, you should be able to turn that bracket around. 2) You can make a custom bracket with more range. 3) You MIGHT be able to adjust a welded bracket by inserting washers or a custom spacer. Love your channel! I have learned a lot from you.

[@tomnkathiedoran3471]

Thank you, you've given me some ideas to try!

[@puffythecampfireplayer6143]

You’re a genius! I’ll never need to replace my belt!

[@dano1307]

Oh sweeet thanks/ I ran out of adjustment range.

[@dano1307]

@@puffythecampfireplayer6143 🤣

[@phoenixrise1133]

Thanks for the ideas. My mom in law belt loose and no more adjustment room.

[@arodman77]

Awesome, worked like a charm. I was worried about having to send my mower off for repairs while hiring someone to mow my large lawn, till I found your extremely helpful video which saved me money and time!!!

[@StevesSmallEngineSaloon]

Glad I could help

[@thekingtroll2]

Thanks, I'll try this Thursday. I mow my lawn and it's been skipping like it's not cutting it all. I then have to mow again the opposite direction. I've owned the mower for about 10 yrs, John Deere LA100 series. I never once changed the blades or even sharpened them so just assumed I needed new blades this season. I bought them and when I took the mower deck off those old blades looked almost new. NO damage to blade, no nicks, etc. But I replaced them anyway. It still cut the same, missing some even when I mowed in number 2 speed, 3 or 4. It's nice to see it visually to know to adjust the belts. Thank God for youtube. I can learn any subject and take an attempt at fixing it to save money.

[@StevesSmallEngineSaloon]

Right on...

[@dennisricke]

Perfect. I was one of those guys who didn't know of the adjustment and I've been mowing my yard for over 50 years. It was so easy. I thought I was going to have to replace the belt and this was so much easier. Thank you!

[@StevesSmallEngineSaloon]

You're Welcome...

[@BleuQuill80]

Thumbs up for the videos and the Rainier Beer!

[@StevesSmallEngineSaloon]

Thank You...

[@locomotive110]

The only how to video that clearly shows how to tighten vee belt.worked like a charm,thanks Steve.

[@StevesSmallEngineSaloon]

Great to hear!

[@davidmaynard398]

Thank you for the tip, I was ready to take my John Deere to shop for loose belt! I fixed mine in five minutes!

[@StevesSmallEngineSaloon]

Excellent!

[@arthursmith8495]

On my 4th belt on a brand new John Deere in less than 1 year - hoping this adjustment works. Have a brand new belt. My next step will be to contact the manufacturer to see about the warranty or drive the thing off into a river somewhere while shooting it

[@garthlocklin6355]

Thanks Steve! I think my riding mower mechanic added slack to my Husky 38 inch and loosened that tensioner. The store that sold it to me new 5 years ago is gone. This old guy down the road opened a shop so I took it there to get new blades last year. Now it keeps throwing the belt off with just a bit of resistance with tall grass. I replaced the belt last year and it's still in good shape. Same as always; a Yankee moved into town and he figures he can keep a new customer coming back if it keeps throwing the belt. Thanks so much for this video! I have a 10mm wrench and that spring will be tightened in 5 minutes.

[@ursulaba1]

Steve, thank you so much for the excellent explanation. I had the belt replaced by my neighbor, bless his heart, but after mowing the belt would drop off the minute I disengaged the lever on my JD 102/42". Neighbor came to my rescue and tightened the belt at the 2 nuts you have shown. However, he tightened the belt too much so that I can only engage the lever with brute force! Neighbor is a busy man, goes to work every day and I don't want to bother him again. This is why I found your clear instructions so helpful! I shall now, loosen the nuts a bit and pray that this will solve the problem.

[@StevesSmallEngineSaloon]

Right on ...

[@richb.4374]

Steve, you are the man! I learned more about my Deere just watching your video's than owning one for 15 years! The spindle bearing video blew my mind....I can't believe they would run sealed bearings inside a hub assembly with no way for the grease to get into the bearings! Like you said in that video..it may be designed to fail on purpose.

[@StevesSmallEngineSaloon]

Thank You...

[@barryestell6324]

Steve , I am a retired machinist and have worked on mowers for over 30 years and you my friend are one of the best at showing how to work or fix a mower ,,don't change a thing ,,,O me I like COOR'S Lite !!

[@StevesSmallEngineSaloon]

Cool! My dad is a retired machinist too, and his name is also Barry!

[@gfh9786]

Great advice. Will try this tomorrow. Thanks for saving me a service fee.

[@StevesSmallEngineSaloon]

Any time!

[@ralphpetronella8153]

The coveted 10mm socket.... keep that thing safe brother.

[@sidneycoakley1524]

Cleaning out my nans I’ve found 17 of them

[@stariadversesmalum4638]

@@sidneycoakley1524 Well, it’s been a year. Did you lose all 17 yet? 🤣

[@sidneycoakley1524]

@@stariadversesmalum4638 lol I honestly just did a count a few days ago and I'm down to 12. Fuckers are growing legs

[@christopherfisher123]

Steve,you’ve helped me tremendously on numerous different projects,including this one. Thanks a lot for your videos and your time!!

[@StevesSmallEngineSaloon]

Glad to help

[@donaldmyers9179]

​@@StevesSmallEngineSaloon 8:10

[@thostube13]

Great video. Described my problem exactly. Took 2-3 seconds for blades to engage after engaging lever. Thanks for posting.

[@StevesSmallEngineSaloon]

Thank You...and You're Welcome...

[@BluecollarBackcountry]

You're the man Steve ! I'm one of those that didn't realize that bracket was adjustable. My John Deere D105 has been suffering from this very thing. Thanks 👍

[@StevesSmallEngineSaloon]

You're Welcome...

[@williamcharles9480]

Thanks Steve on the adjustment info. Here's an update on the retrofit to an adjustable cable bracket from the original welded down bracket that's found presently on many new John Deere mowers. As said here previously, this is on a John Deere Model E130 with the 42 inch deck. This same deck is offered on many J Deere models and they have the same problem of no cable adjustment. After mowing a moderately sized yard 4 times, the mower blade drive belt began to slip and the housing began to shudder. To create an adjustable mower engagement cable, instead of buying a new belt, as recommended by the dealer, I installed the adjustable cable bracket like the ones that used to be offered on the older models and on Deere's more expensive, new units. The bracket is J Deere part #20168 and the two metric mounting bolts are J Deere part #22456. These are the same metric bolts that are used by Deere to mount the adjustable brackets. To make things a little easier, two standard Grade #5 or Grade #8, 5/16 inch-24 NF bolts can be substituted for the metric bolts. The correct drill for tapping the 5/16-24 thread is an alphabet size drill, "I". A 17/64 inch drill bit can be substituted, which will be just a touch tight, but if caution is used, you won't break your tap. The reason for using the fine thread is because there isn't a lot of metal for the threads, so every thread counts for strength. If using the J Deere 8mm bolts you will need an 8mm-1.25 tap and you will also need the alphabet size "I" drill bit. A 17/64 inch drill can also be used and it will be just a bit tight when tapping, so use a drop of thin machine oil to lubricate the tap. The Metric John Deere bolts feature a bolt head called a "hex washer head" these come with locking teeth under the washer portion so that they don't back off. You'll want the 5/16 inch bolts to have that kind of head also, but if you can't locate that type of bolt, a couple of 5/16 inch flat washers will do with split ring lock washers between the bolt head and the flat washer. Make sure that the flat washers have substance because you will need to snug down the bolts to keep the cable bracket from slipping. Now to the bracket itself. I marked the position of the original cable bracket where the portion that is raised is located. Use a "Sharpie" to make the mark of its position on the mower deck. You'll need that for reference in placing the new bracket. Then I took one of those thin cutting wheels and cut off the raised portion of the original bracket and left the portion that was absolutely flat and welded down in place. I used that part of the original bracket as a mounting pad so that there would be some metal thickness there for tapping the threads for the two mounting bolts into the mower deck housing. You will want to position the new adjustable cable bracket bolts about 3/4 inch apart, center to center and in a position to where the raised portion of the bracket, where the cable attaches, will be able to slide back 1/2 inch from the marked, original location. The 1/2 inch of adjustment should be adequate travel to allow for quite a bit of belt stretch. Make sure that the two bolts holding the bracket get snugged up after the proper adjustment is made, but not so tight that you strip out the threads. Being able to adjust the mower engagement cable should prevent you from having to buy new belts as often, but eventually the belt is going to wear out and stretch beyond the adjustment's range and replacement will be required.

[@shanereber7715]

Thanks!

[@phoenixrisingharley]

great for all of those details thank you very much, how has it been going since the retrofit ........... we are about to do similar and just wonder how its been going

[@williamcharles9480]

@@phoenixrisingharley The mower has not had any issues and shouldn't. The modification is similar to the factory installation and the mower has been active all summer.

[@truthseeker3977]

Thought I needed a new belt. Thanks for this simple tip.Well done!

[@StevesSmallEngineSaloon]

You're Welcome...and Thank You...

[@scottswartz5181]

Thank you Steve! I happened to watch this video last night and did everything that you suggested. Worked like a charm! I can hold off on replacing the belt. Love your videos!

[@StevesSmallEngineSaloon]

Great job!

[@KRIMMINOL]

I didn't even realize that was the tensioner. What a pain in the other side this was. You literally saved me from more frustration 😂😂😂😂

[@StevesSmallEngineSaloon]

Thank You...

[@bowhunting1013]

Hey Steve!! I have a John Deere lt180 and my blade will engage on its own from time to time even when I don’t engage it , thanks in advance for your reply, love your videos brother

[@johnathanlegg9698]

Your belt tension may be to tight, also check for corrosion on the main drive pulley. If there’s corrosion sometimes it will grab your belt.

[@bowhunting1013]

Johnathan Legg thank you I’ll check into that

[@BradGryphonn]

Thanks, mate. We've recently acquired a McCulloch ride-on which is the same as this one and the huskies etc. I've been looking for an adjustment video as I've had to replace the belt due to a previous owner (the one who gave it to me) was complaining that it kept throwing belts and breaking them. Turns out he'd been mounting it by somehow jamming the belt between the Orange mandrel brakes and as a result bent and broke some stuff. I've just about finished straightening everything and am waiting on the belt to arrive today. I'm going to look at your belt replacement video too, to see if there's a trick to be leraned. Cheers mate. Subbed.

[@Joe_Biden915]

Thank you so much! I have been trouble shooting all night last night and this morning. I was getting ready to go buy a belt and all I needed was a socket wrench and five minutes.

[@StevesSmallEngineSaloon]

Right on Mikey...

[@sniffles8655]

Thanks for this. I have the Scotts 48 inch 25 horsepower Limited Edition and could not find the right belt for it. I found one just a little shorter but just adjusted the linkage, it was a metal rod with threads and it fixed it completely, now I can engage the blades. Awesome!

[@waynedellabarca421]

Great video Steve, but would love to see the belt after tightening- just to get a sense of how much to tighten. Love your work

[@n8sot]

Great video Steve!!! I just put a new cable on a few days ago, and it takes a sec for the blades to spin up. On my way out to fix that right now!!!!! I owe ya a beer Steve!! Thanks!!

[@StevesSmallEngineSaloon]

You're Welcome...

[@joshb2492]

Customer: so how long will this take? Steve: about half a beer..

[@StevesSmallEngineSaloon]

LOL! Right on

[@blackhorse2947]

This is why I save all of Steve’s videos……👍

[@SmokeyJoe613]

Thank you for sharing your knowledge steve, I enjoy watching your videos as I try to do all my mower work myself, keep on teaching Steve, your the man.

[@StevesSmallEngineSaloon]

Thanks, will do!

[@dotten50]

I have a 3 week old JD S100 series tractor and on mine where the spring attaches the "L" bracket is welded and not movable. We are having trouble with the belt coming off and when engaging there is a loud thump. Disengaging is smooth. Anyone know how I can adjust the tension on this? Thank you and Steve. You are great. I never had a lawn tractor before and now watching you I feel more confident with it.

[@davemadeja8466]

Same with my 2020 e100. Sent jd a message and they told me to check the manual and or call a dealer

[@trulysick86]

Is the belt the right size? The internets and lots on amazon are wrongly listed. Even 1/2" matters. Or your tensioner is shot

[@dotten50]

No.. it was a 3 week old tractor and belt was coming off.

[@joeshmo13]

Even being 1 yr old this video is helping me still today. I kept having my deck belt slip on my John Deere over and over, sometimes coming off the pulleys altogether and I could not figure out what the hell was going. Had no idea there was tension adjustment for the belt. Thanks Steve I'll be referring to your vids in the future I'm sure

[@StevesSmallEngineSaloon]

You're Welcome...

[@MrEldeanyo]

Thanks, glad i saved my old belts now!

[@jimwatts744]

Steve -- great lesson! You just saved me a service call. Really appreciate the content. Cheers!!

[@StevesSmallEngineSaloon]

Great to hear!

[@neilmccolman8208]

Hey Steve, When I was a kid my old grandpa used to tell me that it is called a " Leever" because kids were supposed to LEAVE HER ALONE , and not touch it ! !

[@StevesSmallEngineSaloon]

LOL, My Dad told me the same thing once! Right on.... ;-)

[@georgeehler9002]

Neil McColman 97:’’

[@DIOLORCOLEN]

Mine did too! Seriously. Lol

[@ssinvllc]

@Steve's Small Engine Saloon I bought John Deere 100 series First time used and noticed 2 issues Steering is not smooth and difficult to maneuver when turn. Second is slow it’s slower than my 15 years old Craftsman mower. I noticed deck belts is so so loose. I can upload the video and send the link to you. I called the local dealer and he said it’s under warranty but $80 for drop off and pick up. Should I tight belt ? Please advise. Thank you

[@otallono]

@@ssinvllc he just showed you how to check... You probably should check

[@bobbypeterson5024]

You had me at the Rainier Beer! Awesome....

[@StevesSmallEngineSaloon]

Right on

[@richardc4105]

I have a D-125 that just started doing exactly what you are talking about with that delay before blades fully engage, thank you for this video will definitely help!

[@StevesSmallEngineSaloon]

Right on

[@Jonathan-hz4yg]

Thanks Steve for another awesome tutorial! Saved me some time taking it to the shop

[@StevesSmallEngineSaloon]

Great to hear!

[@arcaniprea735]

Never knew that was able to be done, thank you for the tip! Keep them coming!!

[@StevesSmallEngineSaloon]

You're Welcome...

[@Paul-bp3qm]

Thanks Steve. Moving the tension bracket back was all my John Deere needed!!! Saved me from replacing the switch and belt

[@StevesSmallEngineSaloon]

Right on

[@jasonwilliams8780]

You just saved me $45 this year! My belt engages the blades some of the time but slips, this is great. I've got beer and a 10mm wrench to get this party rolling. You rock!

[@StevesSmallEngineSaloon]

Thank You...

[@ericjohnson6456]

Thanks Steve, this fixed the issue I was having this Spring with our mower! Now I won't feel guilty watching the wife push her mower around the yard.

[@StevesSmallEngineSaloon]

Excellent!

[@denniscullen8856]

I really like how this guy Gives out his information on how to do simple repairs. . They're easy to understand and he uses the camera Very well to illustrate all his points. I've watched a lot of these tutorials and I find this guy the best. Keep up the good work, no stupid costumes no fake accents just information. Great.

[@StevesSmallEngineSaloon]

Thank You...

[@leatherman651]

Thanks Steve, another great helpful video. I ordered two belts for my LA145 (to have a spare) and they were different in length by about 5/8" and they had the same JD part number on the belt from the dealer. Now I know how to deal with this. Thank you.

[@StevesSmallEngineSaloon]

You're Welcome...

[@Outdoor.pixels]

Steve this video really helped me out a lot! The belt kept coming off on my mower and ruining my belt and I knew it had to be that the belt wasn’t tight enough but I couldn’t figure out how to tight it. I had no clue that you could move that plate back and couldn’t find anything about it in the manual thanks for your help sir!

[@StevesSmallEngineSaloon]

You're Welcome...

[@thomaslockley945]

Thanks for your videos great details an learned a lot watching your video steve

[@StevesSmallEngineSaloon]

You're Welcome...

[@DoubleGnotme]

Beer and power equipment, Steve is a genius. Seriously - Thank you!

[@wallywadsworth1669]

I bought a new belt,and my blades wouldn't stop.So I adjusted it back loose cause I had tightened it because old belt was stretched. Belt still wouldn't stop. I pulled the brake mechanism and it popped after catching,and that loosened it up. I lubricated it and now works. Just figured all that out an hour ago,then read this. Your videos are great !!

[@JohnWilliams-jj2en]

Thanks again Steve for helping. My neighbor is having this very problem, and can help him out. My JD doesn't have the tensioner engager on top, but his does. I bet your videos have helped me on a dozen different issues. KEEP EM COMING. By the way, I was wondering if I should replace my drive belt after so many hours. Ive got about 300 hours on my JD. Haven't really noticed a change, but thought it might not run as efficient over time. Thanks alway, John in Florida.

[@billweimers7645]

I have an e120 and that adjustable L bracket you adjust is now welded on. Any ideas to tighten the belt in another way?

[@adamdille6031]

Same now I need 5 freaking beers !!

[@adamdille6031]

@@TheSaltyDawg hey I ended up buying one 3 inches shorter than the one that came on it now I’m mowing again

[@fire7765]

Great video, thx for sharing.

[@StevesSmallEngineSaloon]

You're Welcome...

[@coreyhoward781]

Thanks for the video. I did that adjustment today on my 2012 John Deere Sabre. It tightened up a little, but I think I need a new belt. I buy a new belt every year. I won't need it for cutting grass anymore this year, just need too pull my grass catcher behind me for the Fall leaves.

[@garywebb7481]

Awesome advice! My Craftsman/Husqvarna has a manual engagement system like the one on your JD. it now has a little over 50 hours on it and probably needs adjusting. I’ll be out checking it this week end.

[@StevesSmallEngineSaloon]

Thank You...

[@lenwalker7393]

I have a related question: does belt dressing make any difference in how the belt grips the pulleys or tends not to slip off. What is the best belt dressing?

[@ronkopf7797]

Don't use belt dressing. Makes dirt/dust stick to your belt shorting belt life.

[@myfinaloption]

OHHHHH HELL YEAH I learned something

[@StevesSmallEngineSaloon]

Right on ....

[@sharky6520]

Thanks for this video. Thought I needed a new belt. Blades would slow way down in thick grass. Did this fix yesterday and it worked great! I still bought an extra belt just in case my belt breaks in the future.

[@StevesSmallEngineSaloon]

You're Welcome...

[@beaustjohn2342]

I tell steve...your videos and teaching are worth their weight in gold brother! You are the reason ive been able to save money on repairs and not have to pay those over inflated prices at the repair shop😁

[@StevesSmallEngineSaloon]

Great to hear!

[@JNC1973]

Yeah but I just took off the old belt and blades on my Craftsman T210 Ride On Mower and put brand new ones on. Now a week later when I go to mow the lawn the belt fell off the pulleys in the middle of mowing and when I looked underneath the deck to see what the problem was the new belt was all shredded up. How does a brand new belt get that shredded from about 15 minutes worth of mowing? Everything was fine up until I put these new blades and belt on. Now I dunno what to do?

[@jimbos1567]

I'll be damn'd. I've had a D-110 for 8 years, and I didn't know that. Thank you again.

[@StevesSmallEngineSaloon]

You're Welcome...

[@Calvin00000007]

Thanks so much for this video, I have a MTD 14.5 38 inch cut and just replaced the belt as the old one got jammed and was cut off. After putting on the new belt it was very slack and it also got snagged but luckily it didn't snap but now has a small cut in the side. I couldn't figured out how to adjust the belt tension, after watching this video I adjusted the spring mount like Steve did in this video and it worked perfect. tks bud :)

[@StevesSmallEngineSaloon]

Glad it helped

[@Spacecowboy1969]

Longmire would be proud of your beer of choice. Excellent video by the way. Surprisingly simple fix and there's a lot of good information in the manual that comes with new mowers that too many people file away and never open. Keep the info coming because you've saved me a lot of money. 👍

[@robertkountz5866]

Will that work on the John Deere E-130?

[@Oldsmokey1]

Thank you buddy that was actually really helpful

[@StevesSmallEngineSaloon]

Glad to hear it!

[@johnduffy6546]

SUPER helpful video. Thanks, Steve. I have a 16 year old L100 with a Kohler Command engine which runs as good as the day I bought it. However, I have noticed the blade rpm has not been optimal through taller grass. I'm hoping a simple adjustment will fix this...love your channel. Cheers!

[@StevesSmallEngineSaloon]

Good luck!

[@kevinbrunner4003]

Just got in from the garage, and my mower now works! Thanks STEVE!

[@StevesSmallEngineSaloon]

You're Welcome...

[@joshuakallenberger915]

I have a newer E100 and that bracket is welded in place 😔

[@billstiles487]

Sorry Steve. You are way off on this one. Review video, 2 beers. Find lever, 1 beer. Find spring, 1 beer. Locate spring, 1 beer. Find 10 mm wrench, 1 beer. Trip walking to the carry out (I'll pick up a 12 pack this time. ) Find mower.........

[@StevesSmallEngineSaloon]

Fair enough!

[@heathere.785]

Thank you so much! I'm left to my own knowledge to get my 19 year old Ariens mower running properly!(it was my Grandpa's and I'm not ready to retire it) Your videos are amazing! Thanks again!

[@StevesSmallEngineSaloon]

Fantastic!

[@lenwalker7393]

Steve this is terrific instruction for solving a frustrating problem. I am going to check my Craftsman 54” deck this morning. Carry on!

[@StevesSmallEngineSaloon]

Thank You...

[@superpoacher6711]

The hardest part about this is going to be finding a 10 mm 🤣🤣

[@UNBREAKABLEDADDY]

Sooo true lol

[@TheBamaKid1962]

Run to harbor freight and get a 51 PC socket set SPECIFICALLY for your mower, it'll have the 10mm (the most common metric bolt) as well as the S.A.E sockets and they're 15 bucks, yes it's a crappy case but it still works! When you have another occasion to work on your mower, you're in good shape. Now I'm going to tighten my belt and hope it quits coming off!!! Peace y'all

[@deandrecrawford9245]

Once I found my 10mm it’s never leaving my side😂

[@gregstokes1025]

I bought 4 extra 10mm wrench and. They are now extra 10mm wrenchs in all my tool locations

[@TXNLIF]

No the hardest part is finding that sip of beer with some1..lol

[@lesbadham9671]

Thanks for your sharing. Much appreciated.

[@StevesSmallEngineSaloon]

My pleasure!

[@kevinholden9875]

Super cool but could have gotten to it sooner. I knew what to do as soon as he showed that bracket with the slots. Thank you!

[@kathrynharmon7275]

I love your videos. They have good visuals, are informative and edited. No long periods of Nothing, Thanks from a single gal doing her own yard work.

[@StevesSmallEngineSaloon]

Wow, thank you!

[@harborsplayhouse6269]

Mine is welded to the deck put on a new belt but his still has way more slack then I would like

[@bulldawg7232]

Hahaha me too Instant disappointment 😞

[@357bullfrog9]

Mine is on my troy built so I'm wondering the same thing

[@bulldawg7232]

Im going to try cutting mine off, drill it out, move it back and put a bolt through it Or maybe bend it? Got to look at it again.. new belt still slips like crazy

[@SeniorBaconHair]

mine is welded to the deck also and putting a new belt has not stopped the belt form falling off every time I disengage the blades. What next??

[@357bullfrog9]

I came up with a idea y'all. What if you cut one coil off the spring and try attach it ? That would put more tension on wouldn't it?

[@mellowpuddle]

Jokes on you! I chug the whole beer before I even start!

[@bruceprosper7625]

Lol..good deal ..got the jump on it

[@Kreyes956]

I agree 💯% sir !! 😂

[@timgriffin2116]

1638 John Deere saber riding mower hydrostatic won't move

[@crystalknowles3656]

Thanks, this totally worked! I just changed the belt and it still wasn't engaging. You are amazing!!

[@StevesSmallEngineSaloon]

Fantastic!

[@instabloksuncare808]

Thank you Steve! Your videos are very helpful and simple to follow along. Your video content is my go to source for all small engine lawn equipment repairs.

[@StevesSmallEngineSaloon]

Great to hear!

[@mattdloughy5369]

My adjusters welded on no bolts. What should I do?

[@charlief1313]

Good vid but my craftsman doesn’t have the adjust thing. Has that bracket but can’t reposition iy

[@s.d.bobplissken5674]

Had an issue with the blades not engaging after being stored all winter. I checked connections but nothing seemed out of place. Belt seemed loose thought should see how to adjust the tension. Thank you sir. Immediately after adjusting took it out for a test cut and it's back to business. Appreciate the content.

[@StevesSmallEngineSaloon]

You're Welcome...

[@marshallborder9089]

Didn't know really how too Steve - you just keep pouring out the tips - God Bless you for helping us all out .

[@StevesSmallEngineSaloon]

Thank You...

[@Bobbyg520]

Maybe stupid question, Is it possible that tensioner line can get worn out? I am having a problem on my husqvarna where the belt itself is coming off when I disengage the blades. I have purchased a new belt, but still there seems to be a good amount of slack on it when even before engaging the blades. I have also adjusted that tensioner bracket you said to where it is a fair bit tighter, but still the belt falls off when I disengage. Any suggestions are helpful, thanks for the video!

[@terrythoffman9375]

Some models were missing one of the two keepers on the tensioner pulley, the company put out a letter on this.

[@eyeone2]

Thank you Steve 👍

[@macknumber9]

@@terrythoffman9375 which company? I have a troy bilt super bronco..model year 2006

[@johno2355]

Nice job Steve 👍🍻

[@StevesSmallEngineSaloon]

Thank You...

[@johnhamre511]

Thank you Steve I have a Toro LX426 and about I changed the few the belt a few years ago. Just really tightened it up it makes it just like new again. Thank you for saving Unnecessary labor.

[@StevesSmallEngineSaloon]

Good to hear