Stuck Down Shock (Specialized Autosag)

How to fix a stuck down mountain bike air shock that has autosag.

[@spelizz16]

what can i do for my front fork when this happens?

[@954mmorgado]

I thought I broke mine. Thank you for the video!!

[@martinsaa2345]

Thank you very much for this video❤❤❤❤❤🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽

[@secretcontroller1904]

Thank uuu sm ❤❤🎉

[@ManjilSth]

Thank you soo much for the tips it worked now should we put 300 PSI air ?

[@jtrax7306]

What if you can’t get the dampener to slide into the air shox on the rebuild

[@thomasgendron1446]

I have this problem and I figured out how to fix it by using this technique but it keeps happening! What is happening????

[@tadejhrescak327]

Can you put volume spacers in this shock?

[@alexace2193]

thank you so much!!

[@dbcSikadMTB]

Thanks for the video. Just a question, what causes stuckdown? Inappropriate use? Mine is always stuckdown after hitting a trail. However, when only using on the street, it's not stucking down. I'm really bothered,

[@traillabs5570]

If you have a shock without the autosag it may be that there is too much negative pressure in the shock and the only fix is to force the pressure to equalize by using something that gives you good leverage (we use a 6foot press). Otherwise the only solution is to remove the air-can...which is dangerous. Your air piston quad ring may be worn out and is leaking air between the chambers.

[@diegomurcia3619]

I did what you guys explained on the video and it works but my rear shock still getting stuck down after a ride I don't know what to do.

[@Macabre_Mike]

Diego I'm having the same problem with mine, if you find any fixes for this please let me know. Thanks

[@diegomurcia3619]

@@Macabre_Mike Allright I did empty the shock to 0 psi then i did the equalization then fill it up to 275 psi, take the rider position press the autosag bottom and then I fill it up to my weight in psi, I went to ride in the morning and it held prerty good hopefully it I'll stay like that hopefully this will work for you otherwise I think a 50 hour service needs to be done, that's going to be my next steep if it doesn't held.

[@traillabs5570]

Hi Diego, sorry for the slow response we don't monitor You Tube. Try following the fill instructions and setting sag that way. If you're still losing air and getting it stuck down check that the main chamber air valve is tight and that the valve core is tight. If all of those are good then you likely need to have the shock serviced and the quad ring needs to be replaced.

[@scaserta8]

I can literally not push down the auto sag button I don’t know what to do

[@PeterNguyen86]

Unscrew it first. Then press it down.

[@tv-fh2gr]

I’m using now this shock… I think…. very very worst so I need Ohlins haha 😢😂

[@karlocehulic515]

so do i use shock pump for mesuring psi after clicking autosag button or do i just sit on bike and then click autosag button? thanks for vid btw

[@traillabs5570]

Hi Karlo, when using the autosag to find sag you fill the shock to the pressure indicated on the decal, probably 275psi, sit on the bike and depress the autosag button. That will release pressure until the chambers equalize for your weight. Once it stops releasing air release the autosag button. You can then attached your shock pump and see where the pressure is if you want to know.