Sure Cuts A Lot 5 - Manual Tracing with Pen Tool (a little advanced)

  Рет қаралды 2,902

ScrappyDew Creations

ScrappyDew Creations

Күн бұрын

Пікірлер: 12
@nancyschubert3276
@nancyschubert3276 5 жыл бұрын
Thanks a lot. This has taught me some new things in Scal!!
@marvinf14
@marvinf14 5 жыл бұрын
Thank you a million this helped me a lot.
@rudyjrivera
@rudyjrivera 5 жыл бұрын
Nice Video. I do have a question that has nothing to do with this video though. I am new to SCALP4. I will be cutting numbers for jerseys in the near future. My question is this...I will be cutting vinyl from a 10 yard roll. In order for the plotter to continue to cut and to get the most out of the roll, do I change the cutting mat in SCALP to say 15" x 360" and then put the numbers on that mat, zoomed in of course. Am I doing this correctly?
@RobVanArsdall
@RobVanArsdall 5 жыл бұрын
I think SCAL 4 regular can only cut 72'' you will have to do pro if you are wanting more than that.
@martaarguello7210
@martaarguello7210 5 жыл бұрын
Hi, first thanks for your wonderful videos. Can you tell me how I can convert and stamp image from my rubber stamps into and svg file and create a shadow on it. I own a cricut machine and I have the SCAL5 software. Thanks
@ScrappyDewCreations
@ScrappyDewCreations 5 жыл бұрын
I would stamp black on white paper - take a picture of it and trace it.
@martaarguello7210
@martaarguello7210 5 жыл бұрын
thanks, I just got the scal5, do you had videos on trace it?
@susannes2806
@susannes2806 5 жыл бұрын
Thanx❗️
@annettewornin7683
@annettewornin7683 5 жыл бұрын
So helpful thankyou
@megnamilin
@megnamilin 5 жыл бұрын
I'm really struggling with the draw feature. Is this type of editing only avail in PRO. when I select to push lines out it selects 2 nodes and pushes a straight line, it doesn't seem to want me to adjust curvature
@ScrappyDewCreations
@ScrappyDewCreations 5 жыл бұрын
make sure you select BOTH nodes and change them to a CUSP node then you can push them...
@megnamilin
@megnamilin 5 жыл бұрын
Yes I have cusp effect highlighted for all nodes. I do notice some differences in your screen and mine. After selecting cusp I get an arrow and a small dotted box as a cursor, yours look like an arrow and a plus maybe. I can push out from the node wings but it just will not allow me to push from the line.
Top New Features in Sure Cuts A Lot 5
21:47
ScrappyDew Creations
Рет қаралды 47 М.
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
Sure Cuts A Lot - How to turn a jpg / png to a SVG
15:17
Crifty Crafty
Рет қаралды 7 М.
Contour Cutting with Sure cuts a lot cricut scal
10:29
Sir A.
Рет қаралды 3,1 М.
Why you do NOT need SCAL 2 to cut anymore
20:52
ScrappyDew Creations
Рет қаралды 36 М.
3 Hours vs. 3 Years of Blender
17:44
Isto Inc.
Рет қаралды 6 МЛН
7 Key Points about Tracing in SCAL5
11:46
Sandy McCauley
Рет қаралды 4,4 М.
Sure Cuts a Lot     Trace Image Tutorial
19:01
createinspain
Рет қаралды 10 М.
SCAL lesson 1 - the basics (Sure Cuts a Lot)
25:29
SDIVADesigns
Рет қаралды 120 М.
Tracing with SCAL (Sure Cuts a Lot)
7:18
SDIVADesigns
Рет қаралды 18 М.