The 44” long “shotgun storage” was ironically awesome as you went through the features.
@jessebeckton371710 жыл бұрын
just an observation for your next build.. hinge the cover on the other side so if you have to pull over to the shoulder of the road and get something out of your trailer your not at risk of getting run over.
@TheRowdyJ4 жыл бұрын
outstanding observation.
@ericl38702 ай бұрын
I live off-grid and this'll make a good backup power for my cabin.
@bolingmark7 Жыл бұрын
Still wearing your SWAG on my front diff cover on my squirrel powered yj . Love the tailgate conversion kit you offer .
@billybike57 Жыл бұрын
Outstanding work from Swag! On a separate note, I do watch a lot of KZbin and I have noticed a lot of appearances from your portable bandsaw base. I bought mine 5 years ago, I use that bandsaw more that my stand up bandsaw. That’s been my go to! 😊
@BeefaloBart10 жыл бұрын
Lookin good. BTW for those who dont know, some of his products are upgrades to harbor freight tools to make them usable. Not to mention his prices are reasonable on top of that. So buy a cheap tool, upgrade with his parts and still be better than some tools costing 4x as much off the start. Would be interested in some of the cad files in 3ds format for the trailer itself. I had the same trailer and my YJ I made in 3ds format and converted to a couple games but lost it all in a hard drive failure.
@jamescarmean27018 жыл бұрын
+Medium Man Sorry for your loss buddy. Maybe you can get her back up again.
@mattangelo12804 жыл бұрын
Love the fuel/ water storage
@montwolfman11 жыл бұрын
Well done Troy.
@EuropeWho4 жыл бұрын
Awesome work. Something I'm looking to try my hand at building for my 84 k5 blazer
@greywolfoutdoorshomestead9962 Жыл бұрын
Handsome sidekick ya got there
@TheTorkerman7 жыл бұрын
Really really nice trailer. Great job
@kennyc3887 жыл бұрын
Nice rig. Welds are nothing to write home about. Retired pipefitter-32 years.
@GatsbyParty Жыл бұрын
Amazing work man, but get a go pro or something because the shake makes it more difficult to watch. Especially to focus on something in the video
@jessebeckton371710 жыл бұрын
How heavy is the trailer now after all the new metal work?
@Jarod19417 жыл бұрын
I saw this video when you first released it and I loved it then. I still do. Question: how do you access the storage when the tent is erected?
@markhoffman49034 жыл бұрын
I believe that is a..... "You don't"
@truedeadman13 жыл бұрын
Sweet trailer. Nice work
@ezmac622 Жыл бұрын
Nice work!
@stanleyortega71167 ай бұрын
You have more photos or videos of this trailer. I really like it, I would like to make one. Thank you
@CatfishLove Жыл бұрын
What kind of trail you going to be on to be able to pull a trailer. I think they call those dirt roads not trails. Looks good though.
@Swagoffroad13 жыл бұрын
@Newt0040 I never did get the empty trailer to the scales. The guys I built it for said all loaded up full of gear for travel it was ~1,540 lbs.
@quentinbelmonte57089 жыл бұрын
My compliments, sir....
@xXShadowRejectsXx12 жыл бұрын
this is so sick! i want one!
@chris28184 ай бұрын
Do you sell that hitch or have a video on how you made it?
@chris28185 ай бұрын
Do you sell that trailer hitch assembly or have a video on it
@mikekollross88109 жыл бұрын
People find fault in others hard work like there is a prize for it at the end.
@weareallbeingwatched46024 жыл бұрын
that is some tasty fabrication work
@MYTOYMAKERZ9 жыл бұрын
To Jesse B -- could it be the trailer is going to be mainly used in a country with left drive lanes unlike the U.S. -- just a thought......Cheers
@RedDragon126011 жыл бұрын
About how much do you think all of this would cost? I have an M105 that is sitting at my ranch that i only use once in a while and this is a good idea for me an my son for camping trips.
@AMetalWorks11 жыл бұрын
What do you think about using 16 gauge with 3/4" 16 gauge square tube for a skeleton for the box of of a trailer like this? Strong enough? I have an extra sheet of that and plenty of 3/4" tube I could use to start building my trailer.
@ThePaulgillett9 жыл бұрын
impressive
@glennd818 жыл бұрын
Troy, approximately how much would a build like this cost, considering I provide the trailer?
@petea27217 жыл бұрын
Courtney Daniels more than you could afford kid
@glennd817 жыл бұрын
Ehh, I'm not doing too bad at 31. ;)
@kuladeeluxe4 жыл бұрын
Isn't that hitch missing an axis of travel?
@Newt004013 жыл бұрын
what was the final weight? or did you get around to it. im looking for a trailer to do a winter project like this before next season
@JayBowmanJeeper6 жыл бұрын
what would a trailer set up this way painted 97 TJ White cost someone?
@baashie4 жыл бұрын
Swag badge because I CAN🤭😂 🤟
@markcotter42138 жыл бұрын
nice!!!
@joegood16411 жыл бұрын
the original trailers bodys were 16 ga, so Im betting you'd be just fine.
@derrickmurphy99887 жыл бұрын
i like it a good tough trailer
@nswsparky12 жыл бұрын
what thickness sheet did you use for the lid?
@cal9058 жыл бұрын
how big is the box
@eo85137 жыл бұрын
What was the weight?
@070ruben9 жыл бұрын
exelente.
@CrossroadToCountry5 жыл бұрын
I know this is really old video but I'm wondering about hinges... trying to find where to get some heavy duty hinges in a hurry
@ammagato8 жыл бұрын
Ben fatto!
@jcoats55292 жыл бұрын
Those Jack's suck. You're trailer will still be all wiggly when up in the tent!
@noname-lv6oy4 жыл бұрын
👏👌
@MYTOYMAKERZ9 жыл бұрын
To Eric S. Now are you a speech therapist because to comment on such a small issue you must be perfect. Ah da hum maybe he should quit breathing while he is at is. Cheers
@Raquel779687 жыл бұрын
78
@MF1128310 жыл бұрын
not a selling point when you say "harbor frieght"
@007more73 жыл бұрын
If explaine one more crank jack im going to smack the shit out you
@smackface610 жыл бұрын
thats all kinds of badass tho
@Wade9706 жыл бұрын
Nice work!
@jamescarmean27018 жыл бұрын
THIS is exactly what I want to have done to my M-416 Jeep Trailer. I could use some advice to get all of the items needed and some plans. I am a disabled veteran and don't know how much I can do or if I should get it done by someone I can trust. I got seriously burned financially on my Jeep rebuild and it cost me thousands unnecessarily. A very painful experience in trust, I can tell you. Any help or guidance would certainly be appreciated. I would like to see the tent deployed. I like that it is on the ground since I can't see the wife and I climbing up on the top to sleep!
@petea27217 жыл бұрын
try painting your welds cos they are already rusting.
@Swagoffroad12 жыл бұрын
It was made out of 12 gauge, however the 2nd one I built was out of 14 gauge which was much lighter and worked just as well. Troy
@markmarinii116811 жыл бұрын
What I would give to spend a week with you troy in your shop and learn everything I could... Great work as always troy. I have pretty much all of your products. Thanks again from Texas.
@kbar4x411 жыл бұрын
I seen a few useful points for my trailer I'm about to start building.Thank you for posting this video
@navaneethanarunachalam12924 жыл бұрын
Tik tok shows and fun videos
@WildDigger5 жыл бұрын
Very nice build. Love the lid storage idea.
@SHOTGUNJIM111 жыл бұрын
what do you charge to build one if trailer is supplied
@williamfeather39155 жыл бұрын
SHOTGUNJIM1 I was just thinking that. No one got back to you huh
@jasonhisey30006 жыл бұрын
good to see camera man for blair witch movie is still filming
@PrepperLink11 жыл бұрын
Great video, and I really like the design. Can you please provide the part numbers for the gas springs and the mounting brackets?
@PhunkyMunky7611 жыл бұрын
Holy Awesomesauce!!! Nice work :) I want to make something like this but, alas, I'm perpetually broke LOL. However, with some smart planning I bet I could make such a trailer happen regardless. Looks like it'd be a blast to use for family adventures.
@hummervs32785 ай бұрын
Very nicely done. I wonder what was the end weight and did the lifts hold the extra 210 pounds of weight?
@scooter20999 жыл бұрын
So .... how do you get into the trailer tray when the tent is out ????? Sorry, but this is a silly set up - seen much better set ups
@JM-iw9tj9 жыл бұрын
I agree. Also, it must be heavier than sin with all that unnecessary metalwork.
@Sig721Tau6 жыл бұрын
scooter2099 1st) How about you build a better a trailer and then, post a video about said trailer. 2nd) I would suggest that the owner grab all of the stuff thast he needs before erecting their pop up tent. Fyi..
@Rec_hunt_fish6 жыл бұрын
being that its a rooftop tent and he can lift while its not setup so he should be able to lift it up when its setup being that there is no poles on the ground only a ladder so unless someone was laying in the tent at the time i dont see a problem with it
@MrMotortech11 жыл бұрын
Very nice work sir, I think it will look great with the bed liner finish on the whole trailer.
@spikeydapikey148312 жыл бұрын
Nice, want one!
@careks12 жыл бұрын
Nice trailer, must build one for my Wrangler also...
@PaulPerry113 жыл бұрын
Great job. I've just started on my own Bantam trailer build. Very much like what I have planned. Thanks for posting.
@OlympusHeavyCavalry5 жыл бұрын
Interesting trailer modifications, Cheers :-)
@bfgivmfith8 жыл бұрын
Nice work.
@WilliamHiggins-x7s8 ай бұрын
Did your five lug wheels fit the original bolt pattern?
@FredMiller11 жыл бұрын
Very nice job! Love your ideas...
@kiwionarope7 жыл бұрын
Sweet build, very nice job.
@raygunrunner9 жыл бұрын
Son gives. A size comparison
@Thetimbercruiser5 жыл бұрын
Legit build man. I like it!
@DanielCastro-ch6xv8 ай бұрын
Nice ! I’ve been kicking around the thought of building a lid , I’m building one now , you just happen to give me a great idea ! You did great work my friend !!
@mstrdiver4 жыл бұрын
I have one of Canadian M-101CDN trailers, which is essentially the US 416 style. Where can I procure the lid like you have? I didn't see it one on the website.
@texasfirefighting3 жыл бұрын
I’ve seen this video before but I forgot to comment. I have a similar trailer built in 1946 per the title. The lid is heavy AF and I only have one shock on it. It’ll go up with some muscle and stay sitting up but I’d really like to add another support lift. The issue is on the rear of the trailer, the previous owner put a swing out tailgate and there is also a water line in the area where I would l likely need to put a piece of C-channel to attach a support to. I’ll be posting a video soon with all the features on mine. I need ya’ll to critique it and tell me good or bad what I should change, add, remove completely, etc....
@wfd80510 жыл бұрын
Any chance on more info on the tent? We have a similar style trailer that I've wanted to add a tent to for a few years now. Thanks!
@lukeclarke80543 жыл бұрын
That is beautiful mate. A lot more simple and nicer than anything else I’ve seen on KZbin. I’ve been watching and looking for ideas as I’m looking at building my own from ground up. I’d do the same as yours but I’d make the top so it goes straight up and down with a canvas extension that folds out and ditch the roof top tent. But I really do love the build.
@Captleemo8 жыл бұрын
That is pretty slick. I am one of your customers having bought a portable band saw stand for my Dewalt portaband and I really like it.
@karlanderson17914 жыл бұрын
I have an opportunity to buy the same military trailer but I figured I'd put a permanent cover on with a rack and rooftop tent and a cargo slide in the bed.
@oakleykuwaity11 жыл бұрын
amazing trailer
@dc763843 жыл бұрын
I'd suggest getting some paint or Clearcoat on some of that raw metal...excellent work.
@mrsunfire0212 жыл бұрын
amazing
@MrJeep755 жыл бұрын
You sure fuck that up
@r.mercado973710 жыл бұрын
Not bad at all. Quite ingenious!
@jamescason16743 жыл бұрын
Real nice build would like to have seen more of the jeep looks like a real good match nicely done
@thorlayne42573 жыл бұрын
How much?
@arneservatius86863 жыл бұрын
Your a Good Craftsman😁Michigan
@aaronraufman80927 жыл бұрын
and it weighs nearly as much as the vehicle towing it?
@jamesdoerr43184 жыл бұрын
I really enjoyed your video. What a nice build.
@TheRowdyJ4 жыл бұрын
this thing is NICE! nuff said...
@fotostudio688 жыл бұрын
Cool! TNX!
@johnnybigrigger3129 жыл бұрын
everything looks great but I wonder how your coupler has held up over the years now? turn left right and the up down pivit but you didn't have any compensation for twist jeep leaning left and trailer leaning right
@BlazingLove3168 жыл бұрын
+johnny bigrigger That's what I noticed???
@zososldier8 жыл бұрын
+johnny bigrigger i believe it has a bolt threaded into the tongue. so that bushing and bracket is bolted to the receiver and there is a bold going from the bushing to the tongue. i dont know if i would want a single 5/8 or 3/4 bolt towing my trailer.