Swapping Over The 5.3 LS | 1952 GMC 3100 Restoration Part 2 | Turnin Rust

►►Subscribe To Turnin Rust! (It's Free!) - bit.ly/2qdVaGz
►Watch Part 1 Of The GMC Build Here: • Turnin A Lost Dream In...
►NEW MERCH OUT NOW!!!
shop.turninrus...
Join in with Lance & Wyatt as they tear into the recently acquired suburban with hopes to remove the 5.3 LS Engine and place it in it's new resting place.
With long nights ahead, the guys rip through struggles and obstacles to make sure this LS Swap is the perfect fit for the 1952 GMC 3100.
**SPONSORS:
►Huge Shout out to MAXXD Trailers for hooking us up with a
Drop-N-Load (A6X) to make loading our picks a breeze.
Check out their inventory here:
www.maxxdtrail...
►Narration by Bryan Saulsbury:
www.voicesbybr...
**SOCIAL MEDIA:
► Subscribe to us on KZbin:
www.youtube.co...
► Instagram: / turninrust
► Twitter: / turninrust
►Website: www.turninrust.com
**SEND US FAN MAIL!!
Turnin Rust
P.O Box 865, Bogata Tx, 75417

[@TurninRust]

Thank you guys for tuning in & hanging for the live premiere! We will see you guys on Part 3!

[@robc7812]

weld a 2.5-3 inch bolt to the engine hoist pump valve.. makes turning it so much easier and more controlled...

[@harleyadam4813]

If you guys want some help with a project this coming summer, I know a bunch of handy hands with tools that would be happy to converge on Bogota next summer just for the fun of it. People from all over the country - as far as southern California to me up in southern Maine. I'd probably ride my Softail down and dedicate one saddlebag for tools.

[@Photogunkie]

Did I miss u installing the pickup tube in the oil pan

[@Bob-507]

@@Photogunkie they still have to put pan gasket on too, but that'll all come when they pull the engine back out to power wash the frame and probably paint it too....stay tuned for part 3

[@swagnificent1215]

Did u fix the leaks?Are u guna upload a video of using the aftermarket harness

[@TobyFireandSteel]

I only found you guys recently I'm a KZbinr myself and make custom knives with my 10 year old son. I just wanna say thanks for having the courage to open love Jesus and even say serving God in your into. I also have a podcast and have actively been looking for Christian knife makers ect to interview. You guys rock keep it up. I love that you work with your dad I lost mine a couple of years ago and I loved working with him. 👍

[@tonyaxeman4381]

I would have left the 305 in and found a 84 or 85 Trans am intake with twin tbi`s and put that in . That`s just Me .

[@rustywrenchprojects4171]

Extremely common problem with all 5.3 engines over ten years old... broken exhaust bolts... They break all on their own ... even if no one has ever put a wrench on em.... always replace the studs and nuts with good aftermarket ones like ARP

[@xlncy]

What did the sub urban ever do to you... Poor thing was running good until you guys chopped him r.i.p. you not that ugly subaru

[@TrendsbySterling]

Great to see a Father and Son working together on all the projects and turning out some great vehicles! Happy Holidays!

[@kgoddard1964]

dude, there is an oval shaped hole in the front of cross member stick your box end wrench in it to get the nut on the back side

[@Will_my65gmc]

Another great episode! I can tell that a lot of time and effort goes into filming, editing and producing these. Thank you for all your hard and dirty work to bring us top quality entertainment. Can't wait to see upcoming episodes!

[@richardcline1337]

Would have liked to have seen the engine out of a totaled Suburban but like he said, they are extremely plentiful and cheap, so....

[@462ANIMAL]

Cool, the more I watch, the more I want to build something.

[@hermangrantadams4729]

My name is Herman Grantadams . Really enjoy the video on the 1952 GMC . My dad had one with the chrome grill and passed it over to me in the 1973 . I drove it to school and enjoyed the vehicle . 1989 I sold the truck to a friend that wanted one to restore . the trucks original miles 22000 miles . I miss the old truck and wish I never sold the truck

[@mavpty]

Great Job. Is great to see family working together. Greetings from Panama Central America.

[@donaldk.macbaird4950]

Check out the Skid Factory on You Tube they did a classic 2door hot rod with an LS and made it look old school,I believe it was early 60's Nova and he even painted it chev orange and hid the coils to make it look so cool.

[@BattleOfBowties]

Wow, looks like someone bought everything in LMC suburban.

[@joshuaavila8317]

The way this video is deserves more subs its perfectly made

[@rustywrenchprojects4171]

Lance n Wyatt...u guys hit the motherlode of trucks in East Texas..... I'm not too far away from yaw...but rarely see 50's Chevy's.... I've been searching for a 58 or 59 Chevy/GMC fleetside for years that is savable...but with no luck....if u come across a cheap one ... please let me know.

[@detectivedee3717]

What a good father and son relationship it has inspired me to undertake my farming project with my son who is studying to become an agronomist, good work guys and thanks for the encouragement.

[@tracywraley6892]

Holly makes a valve cover that fits over top of the Ls valve covers to make it look like a big block Chevy

[@beatglauser9444]

Sorry to see how you throw the stuff you remove from the truck on the floor! Maybe many parts are nearly worthless: But maybe there is a guy with on a very low budget who could use some of those parts. To me it shows a lack of respect for those parts and the old truck.

[@brucecarter6196]

I agree 100% , I just don't get it with the parts throwing, especially when they talk about selling them....

[@ronniefrank1405]

Love to watch you two work together and something family can watch

[@TimothyKepner]

If your looking for a great dash for it , The PT Cruiser dash is the exact size for it. I just put one in a 1950 chevy truck and they already have digital gages in it.. They have almost the same curve along the windshield and slip in very easy It really looks sweet in there

[@davecar2082]

I love the way you work with your Dad, Easy going and laid back.

[@waltfami]

Trustee

[@jameskahlerjr.]

I would like to see this truck get painted brand new again it would be awesomes to see .

[@tomekc1113]

just curious if anyone knows the story behind the name "Kravened" God bless, Merry Christmas

[@TAXCOLLECTOR-mx3mg]

Kraven after something over and over again. Like a Kraven for quality. It could be anything. Like the hunting bird.

[@Rollingcoalsmaxs07]

Watching you video. Make me. Want to start up my own rat rod business.

[@bwholz]

Can you please tell me where you find the music in your videos? Another awesome video keep up the great work.

[@stewilkes7327]

Hey agen guy's, thank you for part 2 of the build, the work and the craftsmanship that you both put out is outstanding and you and your dad should be pretty proud of each other👥👍. It's a great and special sight to see and watch you both working so closely with each other.... I never did get to experience that feeling or the bond with my dad, so please cherish you're relationship with each other., And plus, you both do amazing things with cars and that's a kinda bond that only GOD creates....cherish life "my brother from another mother, but the same father"....😇 Steve...in the UK

[@pinmandan5164]

Sorry but I would have stuck with the 305 or an oldschool carby motor.

[@vanbrown9792]

For the love of God quite throwing those perfectly good parts around it hurts everytime

[@geno7352]

Van Brown that made me unsubscribe

[@juanhigareda3810]

Just to pick them up again smh

[@andyfanshawe]

You two are so cool, calm and collected its quite inspirational. I build American machinery in the UK but I can tell you that I am nowhere near as relaxed as both of you are!! Amazing steady progress. No rushing around, just slow down to go faster! Admiration form the UK.

[@billsheehy1660]

Awesome, came across you about a Month ago.have almost caught up with everything and am enjoying it all. Thanks

[@delas7389]

Use your welding helmet when you use the cut off wheels... those things explode regularly... that way you can keep making videos.....

[@johnrodgers9877]

New sub here . This is by far the best channel on YT . Absolutely professional camera work , unlike anything else here . The way you and your Dad work together touches my heart . The relationship every boy dreams about with his father , but seldom happens ! So thrilled I found you . God bless you and your Dad . I will certainly be watching . John from Canada .

[@emmanueljenna-y7z]

great job love the team spirit you guys are a blessing in gods eyes im from south africa

[@garyjones7198]

Looking good guys.. When's pt 3? Looking forward to seeing it.. God Bless...

[@marlonisaac5842]

Yes please part 3 n quick thank you

[@petergreen1265]

Too much time wasted in photo shoots in slo mo - just cut the cackle and get on with it -PLEASE

[@larryvelkoverh8966]

WHAT RUST.? Come north thats rust.

[@daveflick12]

What's great is im binge watching all your great videos. I can watch a rebuild in a few hours. Great show, love it. Love from manchester England UK.

[@CBFREE]

“If we fitted a carburettor we’d be done now “ I think dad would have stuck with the 305 !

[@bls.1516]

Awesome truck can't wait to see the next part thanks for the great videos and builds 👍👍😎 keep up the great work

[@stevencollier5807]

I am like your dad, wasnt sure about the LS going in a truck as nice as that. Now that i see the motor in place though, I am slowly coming around. cant wait till your next video

[@PhillipHall01]

I just found your channel, watched a couple videos and subscribed. I mean no disperet to the TV car shows, but I like your channel better than F&L and M Fit G. I mean this respectfully and complementary. I have subscribed. Thanks for the well put together videos. It's a pleasure to see daddy and son working together in such harmony. Daddy allowing son room to grow using his mind and thoughts, and son allowing daddy to put in his good advice. No pride or strife, just as it should be! God Bless you and keep up the good work. Best Regards, Phillip Hall

[@Cher007]

Why always that STUPID 'Premiere' upload? Those videos never show up as 'Watched' in the Abo feed....

[@steveottaviani5861]

This is going to be a great build.God blessed you both with great talent... I'am in Australia watch all your builds good job....:-)

[@mattmanley4666]

I have to tell you guys I absolutely love watching these episodes with my kids " family friendly " is a dieing breed so thank you for clean entertainment and thank you for for keeping God mentioned

[@blackdog.6398]

That is going too be a awesome truck,,! I wish I had a truck like that man !,,,,Thank you .. Blessings.

[@kevincoffman1585]

AMAZING!!! Love watching the father and son team working together!! Cant wait to see more!!

[@johnnymelendez4836]

Great teamwork as always.🛠🔧⛽🚥🗽🇺🇸HAPPY HOLIDAYS🎄 GOD BLESS YOU ALL😇

[@meco72104]

What a awesome build, thats going to be a Hoss.

[@forevercleandetail]

Nice work guys I love it I am doing a 53 in a 83 Z28

[@monecolione313]

Looking good so far. It's definitely a lot of little things needed when lsx motors into older vehicles. Keep them coming

[@timothynewkirk2654]

Congratulations Men, you got er in! But I gotta say: That's one ugly motor! Carry on! ...Newk from Kentucky

[@jakestexassnakes8638]

Yo that Chevrolet reminds me of my 1964 GMC fleet side long bed and it runs but not for sale

[@steelerjayful]

Always enjoy watching n re-watching y’alls videos. No fussing n cussing no drama. I especially like the fact that it’s a father/son endeavor. Usually the father son duos revolve around daddy trying to make up for not being there when the son was growing up due to booze/drugs/prison or all three, but u two show what living a life that revolves around Christ driven beliefs and principles that are truly lived daily not just talked about Sunday morning then put away once u leave the church house. I’m curious but what denomination are you fellas? Myself I’m southern baptistwith a streak of Pentecostal!!!

[@martinharris5017]

Agree totally. These guys rock.

[@Robiko9]

Waiting for part 3 like a crack fiend. You guys are the best channel on youtube

[@larrymuniz4115]

Great job guys, good clean show! I am looking forward to the next one! I love your style of cars and ideas, I myself have a few VW bugs.

[@kameronguess5064]

On the way to school

[@steveshoemaker6347]

At my age l am really Rusty....All the way around...Thanks is in order...!

[@markrandall1456]

It's me again. Your registration is expired on the Silverado. Lol. Thanks for the fun.

[@katerspam]

You should get your dad some kneepads for xmas :)

[@charliemclaughlin1042]

You can send me the whole front clip and bumper lol 👍👍👍👍

[@ntrain2k]

Love this! Please build the transmission before you do your final install. Or swap it over to a 4l80/6l80.

[@jayd8774]

Good to see ya'll making progress , fits like a glove! nice job, God bless ya'll, can't wait to see the next one!

[@johnharros1072]

GREAT ONLINE SHOW!!!! my dad and i worked on my 64 chevy together just finished it. you and your dad remind me of me and my dad.

[@alanstant9356]

Sorry I missed the live stream. I remember swapping out engines once. Took out a 302 and a beefy 289 down in its spot. It was so beefed up that it took 2 batteries to start it up. That's a real nice Chevy. It will definitely burning some rubber of it. Thanks for sharing guys.

[@wdknox68]

God Bless y’all...Sending blessings from Houston!

[@kiwimcozzie5431]

I could watch these builds u do 24x7! Top program .

[@marscarz]

Great job guys, your vids inspire me to get myself wrenching. Cheers!

[@chriskelley1115]

Use a Holy Dominator EFI kit on that. With complete wiring harness and pumps it will be so easy.

[@MARKLOCKWOOD2012]

Why not mount a carb and round air cleaner where it’s just their for looks.

[@briangrogan910]

Love this channel! Great LS Swap! Those RatRod VW Bug, Thing, and Van look interesting in the background. Hope y'all can make a video on those soon!

[@Dam1911]

iPad fully charged✅Popcorn ✅Headphones on so wifey don’t get cranky ✅🔰⚠️💯🛠🏎

[@timothynewkirk2654]

Ive been watching your channel, here and there. I first commented on the Opel GT saying I bought one new in 1972 for $1200. I really enjoyed the Metro build. Now I'm liking this engine swap even tho I'm not a fan of fuel injected engines in a vintage vehicials. But hey it ain't my truck. Carry on, I dig the father and son interaction! Wish my dad was still here! ...Newk from Kentucky

[@shartne]

I had a 1967 mustang with a carb on it and I could set the choke and fast idle to work perfectly on a cold morning go out and start it and it would start easy and run in fast idle by itself every morning no problem. The only advantage to to fuel in ejection is ??

[@cmdr_stretchedguy]

Welcome to 2019 where people are adding fuel injection to their old carbureted engines, and converting fuel injected engines to carb....

[@overthemountain1009]

Throwing those perfectly good Suberbin parts on the floor like trash makes us poor strict budget car guys CRINGE !, but like you said they are not in demand....but still there is always somebody out there that needs those body parts.

[@pedroguerrero7718]

Great work guys 👍 this truck it's going to be cool like always.God bless you guys..and try to use gloves when you are cutting something... take care.

[@dsmith584]

Thanks for another great video. I enjoy seeing y’all rescuing old trucks and buying and selling too. Thanks!

[@stevefromlondon9175]

Great video no loud crazy music playing so it's hard to hear you guys Regards Steve UK London

[@trucks7384]

I enjoy watching your videos I'm planning to do an LS swap too myself keep it up can't wait to see it finished 👌🏼

[@jrbyers96]

Gotta love the bolts/nuts on the engine mounts on the x-member. Its always fun! Just drill a hole large enough in front of the x-member on one side. Other side has a slot where the factory fuel lines ran. Good ole s10 swaps are fun! Love the show guys!

[@rchavez5056]

I love this channel.

[@fredstewart6478]

However. If your going to use a aftermarket wire harness then I retract my previous statement

[@kittyfanatic1980]

That burb actually looks pretty cool I'd definitely rock the style. I'm one for originality. I would've tried to source an original 52 setup for the GMC. What happened with the old "junker" you dragged out from those trees? As always good vids.

[@Patrick_Cooper]

Don't know if you will see this, but do a 1950 Chevy Suburban, window van, if you can find one, and a 59, El Comino. the best looking car/truck ever... and this coming from a Ford guy...

[@scottmcclintock3942]

Kudos to Father Son builds. I have enjoyed your videos. My Son and I completed a 5.3 swap into a 66 Dodge A100. With a stand alone harness you can ditch alot of the clutter then add a vintage look valve cover set and intake disguise to simplify the look. Keeper coming IJN!!

[@toddeccles3090]

Now I'm pondering the idea of an LS swap in one of my Scout II's.....I considered myself a purist...I feel so dirty now...lol

[@chucksgarage7165]

I hate to see you using that cut off wheel without hearing protection. Someday you may regret that. When you’re my age...50.

[@malcomjohnson3181]

Awesome I will be watching you two are doing an awesome job

[@duanewhite3184]

Ain't nobody going to want it what do you throwing it around and damaging it

[@brucecarter6196]

Cool build, we have one similar, but WHY are you just throwing parts on the floor when you just talked about selling them ?? If people are going to buy them they don't want them scratched up ! Stacey David always did this on PowerBlock TV and Gearz and it drove me nuts. With that said, I love you guys, my Pops and I work great together on all our projects.

[@es7614]

NIce work, gentlemen, very motivating. Thank you!!

[@HOGWARTS.CHEERTEAM]

Need y’all to come to tv

[@un1v3rs4l]

just droppin' a line to say thank you for your videos. My dad had a 79 Z/28 that he special ordered brand new (cost like 9K back in that day!) and it ended up sitting in our carport for the longest. I know we were going to rebuild it back to new but he died on the job when I was 15. I am 37 now and you guys give me an insight on what it would have been like. My mother sold it to my uncle a long time back and I wish she would have never done so. I've been trying to get it back, but with no luck. Looking forward to the next video!

[@robluna6235]

Wheres part 3 at I ain't seen it yet not sure if theres gunna b part 3

[@kameronguess5064]

Hey guys I live in the same home town as you

[@joedannunzio9416]

Hi guys and girl, only just started watching KZbin car stuff this year,and uncle Frankie was one of the first I seen. Still feel your loss. Question... what happened to the truck and belair?

[@andyrichey1192]

Yeah going to be awesome!! I enjoy watching the stuffed. I'll continue watching for more

[@mgarc1960]

What year Suburban did you get the 5.3 from?