When I saw that you disassembling fully charge battery and you put your hair in frame at 6:19- I thought it starts smoking and explode now. Gosh...😂
@TECHNOLOGYTIPS101 Жыл бұрын
I agree, this was one of the most dangerous things I ever did, and I will never take such risks again.
@tht1guyfromtht1place70 Жыл бұрын
Im glad you made this video man, good information you saved me a few hours at the bench. i for sure was looking for a way to change out the battery because of the price. i have 3 old batteries i was going to use if i could. good video i also think the suspense of actual time breaking open the case was the best lol
@TECHNOLOGYTIPS101 Жыл бұрын
LOL, I know it was so suspenseful!!
@DarkstarNovembr3 жыл бұрын
The control board is held to the lower battery housing by two screws. They're in the gap between the board and the edge of the case, right above the battery connector
@TECHNOLOGYTIPS1013 жыл бұрын
Too bad the battery packs are welded together and not soldered together, so you need a spot welder to replace them.
@chrispy104k Жыл бұрын
Glad I found this. Thank you for taking the time to rip it apart and showing us the gizzards. I was considering fixing my dead battery but it seems to me that given the way that it is assembled it's just not worth the effort in my case.
@TECHNOLOGYTIPS101 Жыл бұрын
I agree, it is not worth taking the risk of loosing an expensive drone due to a battery failure.
@nguyenthehongduc2 жыл бұрын
they did sale the cell to replace for m2p and zoom. the cell is 4000ma , 0.5mm thicker and i did trying last summer.it's working like a champ, no any error or cutoff at 2%, charging a little bit longertime than oem ,but just for fun , im not risk my drone for just $150. Thank you for videos
@TECHNOLOGYTIPS1012 жыл бұрын
Great information, Thank you
@jftman5319 күн бұрын
What was the battery doing as a defect? Not reporting to the Drone?
@TECHNOLOGYTIPS10110 күн бұрын
The battery was bulging and swollen.
@edwardmartinez40210 ай бұрын
Tear down was nice, info is helpful I have a DJI mavic pro
@TECHNOLOGYTIPS1019 ай бұрын
Glad it was helpful!
@ElmerShox3 ай бұрын
Thanks man for showing what's inside the batter. i have 3 batteries that are bloated. they charge but unreliable to fly
@TECHNOLOGYTIPS1013 ай бұрын
No problem 👍
@droneyourworld8697 Жыл бұрын
Amazing explanation, thanks 🙏 definitely now I change my view of what to o with my battery
@TECHNOLOGYTIPS101 Жыл бұрын
You're very welcome!
@birdbathchiangmaithailand2 жыл бұрын
At first I thought, look at the date of the published video, 1 April. But I got past that & watched more. Fascinating, thrilling and I just kept thinking, do you have life insurance? Thank you for sharing, very useful 🙏
@TECHNOLOGYTIPS1012 жыл бұрын
Thank you
@kuscheiart2 жыл бұрын
Cool video, thank you for that. I hate DJI for this, my battery cells are fully okay, but the connection board seemed to had a problem and did not send aymore battery data to the drone. They did not replaced them. But now I have a extendet torch battery ;D
@TECHNOLOGYTIPS1012 жыл бұрын
You are very welcome!
@fathielmallah3501 Жыл бұрын
so i`ts locked and you have to unlock it
@chadgilmore50462 жыл бұрын
Would you still bring the battery into dji to be repaired ? I got a message come up on the screen of my SC to take the battery into dji to get fixed can dji repair these batteries or should I just buy a new one
@TECHNOLOGYTIPS1012 жыл бұрын
If the battery is still under warranty you could send it for replacement, however they will not replace or repair batteries that are out of warranty. I don't recommend throwing it away yet, because if there is a factory recall on them, they are required to exchange all defective batteries regardless of the warranty status.
@FlakeSE8 ай бұрын
You can source lion pouches with a similar form factor, the absolute Wh figure doesn’t need to match exactly.
@TECHNOLOGYTIPS1018 ай бұрын
Thank you
@JohnnyTruesdell3 жыл бұрын
Very interesting video... I have some information.. the guy that makes the modded mavic 2 pro batteries uses the newer imprived cells from the air 2 batteries.. also I've heard once the smart controller in the battery loses power it is ruined so power must be connected at all times to that.. the guy that mods the battery makes them higher capacity and puts them in a bigger custom plastic case.. he also reprogram the smart controller for the added capacity. In your case here if you bought air 2 batteries to canabolize and could keep power to that smart controller you could probably make some improved m2 batteries at a similar capacity. Would it be worth it.. that's the question.
@TECHNOLOGYTIPS1013 жыл бұрын
Good idea, maybe a good for a slow rainy day project.
@JohnnyTruesdell3 жыл бұрын
@@TECHNOLOGYTIPS101 yes. I'd love to see it..
@DarkstarNovembr3 жыл бұрын
Yeah, I found this: www.eevblog.com/forum/chat/experiences-with-ti-bq-management-ics-when-revelling-laptop-batteries/ Which is a shame, cause I found your comment after cutting my battery wires... Oh well. I expected I'd need a new battery anyway, but it was good to learn about the BQ chips
@LucianComanphotography2 жыл бұрын
once is loses power can be reprogrammed, is not bricked forever.
@snype99782 жыл бұрын
i liked this vid purely for the fancy nails :) that and opening shit the same way i do... precision brute force :)
@TECHNOLOGYTIPS1012 жыл бұрын
LOL!!!
@awesome_slyda20592 жыл бұрын
Those battery cells are $4 each on Ali express. Well worth redoing yourself. Worst case you ruin an already ruined battery and it costs you $16.
@TECHNOLOGYTIPS1012 жыл бұрын
Thanks for the tip, I did search but I couldn't find them on Aliexpress
@awesome_slyda20592 жыл бұрын
@@TECHNOLOGYTIPS101 it's not letting me post a link in these comments. I'll see if I can dm it to you
@TECHNOLOGYTIPS1012 жыл бұрын
@@awesome_slyda2059 Thank you
@luciferbox55773 жыл бұрын
Have you seen the video on here by Bikesh Sethrah?
@TECHNOLOGYTIPS1013 жыл бұрын
Do you have a link to that video?
@a7yout2572 жыл бұрын
JUST A CORRECTION, YOU SHOULD NEVER RUN DOWN A LITHIUM BATTERY TO ZERO, THAT IS WHY YOU HAVE A BMS, TO PREVENT OVER CHARGING BUT ALSO NOT TO ALLOW IT TO DISCHARGE FULLY. ALSO YOU DON'T CUT AND SOLDER, THE HEAT WILL DAMAGE THE CELL, YOU CAN GET MINI SPOT WELDERS BUT SEE VIDEOS ON KZbin ABOUT BAD DESIGNS. I THINK YOU PROVED THAT ON THIS MODEL IT IS EASIER TO GET A REPLACEMENT ON AMAZON.
@TECHNOLOGYTIPS1012 жыл бұрын
I agree, it is too risky to repair it. I finally ended up getting a new one which also started to swell after a year and maybe hundred charges :'-(
@kbellanger41402 жыл бұрын
My battery is fine except for a bulge in the plastic under the plastic is a space. The plastic is warped
@TECHNOLOGYTIPS1012 жыл бұрын
That is very dangerous, watch this video to see why, kzbin.info/www/bejne/mYPSpIigir6CldE
@fidelty24272 жыл бұрын
carefully and uses a knife lol
@TECHNOLOGYTIPS1012 жыл бұрын
It was a very dull knife, nothing sharp to hurt me, but nice catch lol
@edwardmartinez4029 ай бұрын
AliExpress stocks replacement batteries
@TECHNOLOGYTIPS1019 ай бұрын
Indeed, and so does eBay.
@saywhen85823 жыл бұрын
There is no way I would rebuild a battery for my DJI pro 2 I would rather pay the 150
@TECHNOLOGYTIPS1013 жыл бұрын
I agree, it is not worth risking your drone falling from the sky.
@AZtown10 ай бұрын
FYI DJI will replace these free!!!
@TECHNOLOGYTIPS10110 ай бұрын
Thanks for the info
@luciferbox55773 жыл бұрын
That should be Bikesh Shresthah.
@TECHNOLOGYTIPS1013 жыл бұрын
Not yet, but I would love to watch it if you could send me a link
@@TECHNOLOGYTIPS101 Not sure if it's helpful or not, but he seems to be doing what you were hoping to do.
@TECHNOLOGYTIPS1013 жыл бұрын
@@luciferbox5577 Oh ok, I figured it is too risky to use a repaired and unreliable battery on a thousand-dollar drone, so I stopped any repair attempts.
@luciferbox55773 жыл бұрын
@@TECHNOLOGYTIPS101 Personally, I agree with you. It's not something I would consider doing. Unfortunately, we just have to spend our hard earned cash on the proper ones.
@krishanashaktifilms96382 жыл бұрын
hi sir air 2 battery dead
@TECHNOLOGYTIPS1012 жыл бұрын
Hi, I am sorry to hear that try the firmware update it might fix the issue.