The All USED $473 GAMING PC ($630 AUD) - ProjectNegativeSquared

Here is a PC that costs $473 USD (or $630 AUD) and finally made it in the end (ONLY JUST though lol) to get some really high frame rates in Overwatch, CS:GO, Dota 2, and GTA 5. Though Mafia 3 was really tough to run, but still managed to get around 60 fps, which was good.
I ended up with a 4690k that overclocked to an impressive 4.8ghz, but this time around it SERIOUSLY needed a delid, with the temperature drops being incredible... The GPU used was the R9-290x and man the die on this thing is HUGE, and of course with that was huge power output, with the card still managing to heat up an accelero with fans speeds near max.... I would hate to see how bad the stock cooler would be (didn't even try after hearing all the bad stories about it). Anyway after all the problems were solved this PC did come together to make a really good experience :). In the end i decided to call it negative squared, since when they are squared they come out as a positive :D.
Check Used Prices of 4690k here -
US - ebay.to/2p1YldH
UK - ebay.to/2qoJHSR
Aus - ebay.to/2pTFJ4t
*Check out my Video Editing PC - amzn.to/2oFKlrb
►Join our Forums for Discussion - www.techcity.tv/forum
►Shop on Amazon and Support Tech City for Free
USA - amzn.to/1kZUX1z
UK - amzn.to/1jr01dR
CA - amzn.to/2gB4ehH
► techcitypc
► techcitypc
► techyescity
►Like the Content? Support us directly - / techcity
-------------------------------------------------------------------------------------------------
Music Provided by monstercat, chukibeats & epidemicsound

[@ModernVintageGamer]

no one mentioned the killer track in this video - 10/10 would listen again

[@OscarWanDaLe]

Last time I was this early, bryaneasy was still on X99.

[@anthonyseboe4646]

Last time I was here Mafia free was called mafia 3.

[@sbxdd]

dude do a challenge with some other tech youtubers for the best used pc under 500 dollars pls!!

[@AVINIDE]

He should join LinusTechTips Scrapyard Wars

[@nemergix1707]

He lives in australia , Linus is canadian ...

[@skywalker2837]

ΛVINIDE Linus's scrapyard wars strayed from the "Used" build and became more of a "Do this" but "this must be this" and you can't do "this"

[@Pauleh123]

Bitwit and Paul's Hardware both are based out of Cali, but they are participating.

[@albertohart5334]

will this challenge be scrapyard wars?

[@StanleyKubick1]

You are the only PC builder I haven't gotten sick of and unsubbed. These used builds and the bargain hunts are the main reasons for this.

[@-Sirens-]

Ace Futura i mean there is only so much you can do with new things coming out, eventually you are going to run out of stuff to cover and do these used builds

[@StanleyKubick1]

I think you misunderstood me. Tech City is the only channel I still subscribe to, BECAUSE of the budget builds and bargain hunts. Plus the presenter is chill and seems like a nice guy.

[@julianreinhart504]

I know it's hot and loud, but the 290x stock cooler is the sweetest looking stock cooler I've ever seen.

[@KarrasBastomi]

Ah.... I see.... You just love hot stuff right there....

[@UnknownUser-fg3fs]

lol, custom sleeved cables paired with an explosive PSU.

[@usmanafridi3062]

Watch the video till end he explains why he used those cables

[@hidenname541]

+ a 1000 degree gpu

[@pxrisxiv]

UnknownUser I think that PSU is a server PSU so it won't explode, it's made to handle loads of things.

[@simplyMK23]

Oh man ! I've been waiting for this build for weeks ! Thank you so much ! Always a pleasure watching you walk through the restoration process and all those stuffs. I definitely enjoyed it.

[@noofenplays637]

My favourite game is CS:STOP

[@quadraforest]

Mine is Need for Sleep

[@arminsamaei388]

Noofen Plays counter strike source???

[@kayn0645]

ahhaahahah Tube Tycoon

[@TroyKucks]

what about under clock (over watch) ? - sorry for my bad sense for humour

[@Fire2000Ml]

that game is my favourite anime

[@AVINIDE]

Am I the only one who gets triggered when I see no-name PSU? And to make things worse, this PSU has to power the 290X..

[@purrvuss8027]

ΛVINIDE if you would have followed his channel lately he mentioned it in almost 4 videos that those are server PSU, which generally have better quality than the usual stuff. also the system is in no way pulling more than 500w.

[@AVINIDE]

Well I'm subscribed to his channel since he made a review of a GTX 970 from Gigabyte :v

[@abedfo88]

from experience my shitty corsair 750w bronze got overwhelmed by my 290.

[@purrvuss8027]

well My G550m from cooler master handles my r9 290x with 1250/1700Mhz and my I5 2500k@4,8ghz without any problems or even getting loud. Also the G550m is a 80 bronze PSU

[@DPROvse]

I'm also using g550m, nice psu ^_^

[@ripfiszu7471]

Mafia Free

[@Xaltar_]

Probably a bent/dead pin responsible for the dead RAM channel. I have seen it quite a few times. I have also seen boards with pins missing entirely or with a pin broken off from the PCB yet still held in place by the socket. Either way, it doesn't seem to hurt the gaming performance too much so who cares anyway :P

[@MrRoboman333]

The 290X is one of the reasons people think AMD cards are hot. They really fucked up with the cooler on there. The posterchild of "hotter, faster, better"

[@MrRoboman333]

They did what they had to do with the money they had, man. They had great performance and continue to age better than nvidia cards of that time period, it's just they didn't put a good enough cooler on it. Nvidia has market dominance not because their products are objectively better but because people refuse to consider AMD, even when their cards are top notch like they have been with Polaris in the past couple months.

[@MrRoboman333]

I mean I agree with you it has some problems but so does Nvidia. The 580 is an excellent card with great drivers and hands the 1060 it's lunch, people should be buying more 480s and 580s now if their purchases were just based on quality and value alone. People favor Nvidia for the brand name alone. Just like people go for Apple over Android even if android has better value, it's for the brand because "AMD is cheap and runs hot".

[@arbalest7645]

I agree because take vega 56. It's on par with a gtx 1070 and the 1070 use 1 x 8 pin connector. The vega 56 has 2 x 8 pin connector. It is very power hungry but like the fx series, it doesn't outperform everything.

[@samiul16]

well well going to the roots again, nice to see this sort of videos want more budget + used product hunt build

[@GuilleGhemi]

I see this and i feel sooooo proud for the 290x, seriously. Btw, stock cooler on 290x used to manage up to 95ºC before to start throttling. Its pretty damn hot. Tri-x cooler manages 68ºC on load. Actually better than acelero .

[@Ray-dx2pf]

Those 290s can take the heat though. I know someone who ran one for almost 2 years at 94c all the time before he sold it

[@bennybouken]

Sanus Hydra cards are not the same so yours died and his lived even longer

[@dylanmartin4937]

my visiontek 280x rarely goes over 80c

[@Rumi_117]

dunno what you are talking about, the cards ran very safely at those insane temps on the stock cooler lol they were hot cards but the 3xx series was fine, my sapphire nitro 390x rarely goes over 73c.

[@iT3K]

+Sanus Hydra Maybe not enough fans in your case? I have never had a problem then yet again I have 5 fans plus CPU Cooler and GPU Cooler.

[@stadusunids]

Quality always improving. Amazing video Bryan! Also the music at the background is so great.

[@semin8497]

you need to have balls to pair a "never knew about it" psu with a 290x!

[@badatcad]

it's from a batch of high grade server psus he snagged a while back, so chances are it has much higher quality caps and such than your run of the mill corsair/evga etc trash.

[@semin8497]

listen bro,i live in bosnia,i never heard of these psu-s,i am still learning,i only trust thermaltake,evga,cooler master,seasonic,superflower,raidmax bequiet and chieftec! brian has more experience because he builds every day a pc and he knows,but i will be paranoid asf if i had a psu like that :P!

[@miralemnermina142]

SEMiN Ovo je napajanje iz servera napravljeno da radi 0/24, pa se nemoj brinit

[@semin8497]

guglao sam,sad jesam upucen hahaha :P

[@miralemnermina142]

SEMiN Imam ja jedno 750w tiho i kvalitetno a napravljeno u 2008

[@ayomaggotz]

I'm a simple man, I see an All Used Gaming PC build video and I thumbs up.

[@niflexible440]

love how you showed the parts [and timelapse] and benchies with gameplay in there, nice video and last videos of the top5 cpus + gpus was nice too, keep up the great work! More vids like this and those top 5s maybe top 10s ? :)

[@eli72481]

Used one of your local hardware store's vises to delid a cpu, 10/10

[@VVoIfie]

Loved the intro, good vid too as always. It's rare to see broken memory sticks, bad luck man

[@JackKramme]

Love your channel dude, its good to finally have an aussie PC and tech channel. I mean, the American/Canadian guys like Linus and Jay are great, but their focus seems to be more on American viewers/market etc. So anyway, keep up the great work

[@modstek]

awesome video! You could of played it off like it was an easy peasy build but you kept it real. Thanks for pumping out these interesting and informative videos.

[@rajatswain411]

just love all the stuff you do with used parts

[@venettore3601]

I want to watch you do a step-by-step cleaning each component in a used build. It's just way too satisfying watching them get cleaned.

[@OTechnology]

Typo there Brian "Negatve" instead of Negative

[@netwuv3399]

Type O Negative?

[@HydraHead9]

Universal donor right there

[@OTechnology]

Guess I'm super helpful (yes I actually am type O)

[@rockguy5784]

Hey Brian when you are applying thermal paste on the GPU die with the q-tip don't you have to deal with lint on the GPU die?

[@b0ne91]

It's liquid metal, so lint is unlikely to get stuck in the "paste".

[@mmoryan9436]

I can't believe that the 290x was getting that hot even on the artic accelero. It still looks like a good purchase though, it handled all of those games really well!

[@mr.jav1d215]

I bought a gtx 1080, i7 7700K and this almost outpreformed it

[@napowolf]

BS. Probably because everything got set to ultra by default.

[@sebastiangarcia-yb5ro]

Oc is important

[@mmllmmll22]

5:50 that blue blink

[@dani1341]

when you are so early the title says ProjectNegatveSquared

[@red.6274]

Great content Brian, enjoyed it a lot.

[@Rintero_Pryde]

the r9 290/290x and 390/390x (same cards) do run quite hot, the best way to mitigate this is keep it away from long term 100% usage by using vsync, adding more fans to improve airflow in the case, or water cooling.

[@DrSpychology]

Rocking a pretty similar build, i7 2600K with an R9 290, just picked up an accelero xtreme 4 for 30$ and will be installing it pretty soon! My ears won't hurt as much anymore and I'll actually be able to get the full performance from it!

[@PAYASADAS22]

Hey Brian, great to see a new video. The issues with the build hit close to home, I build a pc for my gf with used parts (g31m esc2 mobo, q9400, 4gb ddr2 ram, 500gb wd blue hdd) and for the life of me havent been able to install windows on it (theres a couple of extremely rare issues going on). You most likely dont have the time but if you could help me out it'd be much appreciated! Awesome video as usual! Cheers

[@Leon-du8fx]

Finaly full used build, love these.

[@O_Shag_Hennessy]

Thank goodness you're benchmarking these games at realistic settings for the card.

[@MannyMambo26]

Friday I am retiring my R9 270X with arctic heatsink and 120mm fan. It has served me well. Giving it to my wife because it can still boogie. NUMBER 1 KZbin PC GAMING CHANNEL PERIOD.

[@cynical8330]

Video's like this are why I subbed.

[@HydraHead9]

8:42 Hahahaha, this is why you're the best Bryan

[@AscensionNCS]

Look forward to watching the next video!

[@GooseTech]

Sometimes the mounting screws for the Cooler Master CPU cooler can cause a short on the motherboard which causes the RAM to function only in single channel mode. I had a similar problem with an ASUS Z170 Pro Gaming a few months back. You might want to check if the top mounting screws still have the silicone on them.

[@srsheepdog2671]

Just picked up a Rockit 88 delid tool, and it is awesome. Highly recommend it.

[@techalex1992]

that r9 290 is a furnace. i wouldnt take it even for free. nice video man

[@bluegill5192]

This smashes my build thats $460, Good ol' FX-6300 and R9 280x.

[@alexho8162]

Hahaha delid at bunning, good job!

[@davidmcbenge9370]

I've had a GTX 660 for quite awhile. I've ordered a GTX 770 with 4 gb of GDDR5 which is twice what my other graphics card had in hopes that it will keep my MSI Z68motherboard going for a few more years. My I5-3570k is still going great at 4.2ghz with liquid cooling. Most of my equipment is over 5 years old and I think is going great compared to what is out today.

[@FryingBerries]

If it does what you want then that's all the matters in the end.

[@DarkLinkAD]

A Gtx 770 is a GTX 680 in disguise no?? Sounds like an awesome card to me. :)

[@KennyRedux]

I liked this build man! Problems sometimes are the salt of the life. If you are watching someone else dealing with them on youtube, at least.

[@ryancarpenter1678]

Even this was a year ago, man this is a beast

[@Nivexity]

For anyone, I wouldn't recommend using cotton buds to spread any type of thermal paste as the micro fibers on the buds can easily break apart, separate and mix in with the thermal paste. The GPU wafers can withstand light pressure from the plastic thermal paste tube anyway so giving it a little twirl with the tube head is good enough.

[@OrjonZ]

Only thing I would suggest for 290X overclocking is stick to 1250 or 1375 or 1500Mhz memory overclock.

[@DarkLinkAD]

Those are massive leaps.

[@OrjonZ]

You stick to the one closer or you mod the memory. If you go over 1375MHz to 1390MHz it will use 1500MHz timings and perform worse. 1250, 1375, 1500 are highest clocks with lowest timings.

[@tubawest9768]

Dude, awesome b-roll music!

[@SavageTech]

i love what he does with the game titles!!!

[@williamforbes6919]

Hey! You should check the prices on the HP z600 boxes used, you can snag one for well under $200 with a fairly decent set of dual Intel quads that are hyperthreaded. The main appeal of this is the minimal amount of effort to make it in a system, all you need is to drop in the GPU, and then presto! sub $400 badass rig complete!

[@szczepan34]

"Mafia Free" dude you made my day ;)

[@jay-uo2bi]

Guide to a BUDGET (1050 with older Xeon) pc with keyboard, mouse and monitor for around $490 (AUD).PLZ upvote for others to see! Might not work, just a idea. The pc has 280W PSU which will be enough. Also, u will have to get a better cooler for the cpu if u want around 50Degrees C because the Xeon produces lots of heat and the stock cooler fan is quite slow to keep it quiet. If u are wondering, I have bought that exact pc from that seller. I also bought that CPU and put it in the computer. Temps are around 75c while moderate gaming. BTW I did buy that GPU in it, I put a GT 710 to make it powerful enough to basic stuff but I was never gonna use it for gaming so I didn't buy the GTX 1050. Also the website for some of these are MWave, MWave are a awesome company and I have bought from them many times, if you were wondering they apparently used to be a scamy store but a few yrs ago they turned heads and they have great reviews. _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- PC: www.ebay.com.au/itm/Lenovo-ThinkCentre-M58-PC-Desktop-Core-Duo-3-0Ghz-4gb-160gb-DVDRW-vista-/112378223012?hash=item1a2a4399a4:g:4NAAAOSwoydWqYmY CPU: www.ebay.com.au/itm/Free-shipping-Intel-Xeon-X3230-SLACS-2-66GHZ-LGA775-Quad-Core-CPU-Processor-/262362625009?hash=item3d1607f3f1:g:PjoAAOSwZtJW~UME RAM: www.ebay.com.au/itm/4GB-2x-2GB-STICKS-DDR3-PC3-10600U-BULK-BRANDS-DESKTOP-PC-RAM-MEMORY-DIMM-/231771365285?hash=item35f6a65fa5:g:hAEAAOSwiYFXHtIc GPU (MUST BE LOW PROFILE!!!!): www.mwave.com.au/product/gigabyte-geforce-gtx-1050-oc-2gb-low-profile-video-card-ac00252 BETTER CPU FAN (Don't actually buy this fan, I forget the size of the cpu cooler fan just showing as e.g): www.mwave.com.au/product/noctua-80mm-nfr8-redux-edition-1800rpm-pwm-fan-ab55430 KEYBOARD & MOUSE: www.ebay.com.au/itm/Gecko-Wired-Keyboard-and-Mouse-Bundle-for-Laptop-PC-Macbook-15x52cm-Black-/112265008741?hash=item1a23841665:g:E0kAAOSwUKxYg5jE MONITOR (cheapest 1080P on MWAVE): www.mwave.com.au/product/asus-vp228ne-215-1ms-full-hd-led-monitor-eye-care-technology-ab73255

[@barnosho1611]

great music choice for the intro :)

[@carlwells9504]

Love the Bunnings delid hack! Cheeky Baz!

[@herlotz]

Lol, love your vids, cpu delided, gpu with accelero... awesome stuff for the cash.

[@quadraforest]

last time I came just right on one of his videos, the channel was still called Tech YES City

[@ryanslattery9340]

I just bought a PC with: i5 2500k, watercooled (closed loop), R9 280x, 12GB RAM, 2TB HDD, Z77 motherboard, windows 10, and all in a nice case. ALL FOR $310USD!!! ($450NZD)

[@batmangovno]

Ascendz Ryan Good shit bro, you're good for playing most games and have an ability to go for an i7 if it isn't enough. Respect.

[@drbass9677]

im from nz too

[@ZeroG84]

I'll let you borrow a project name from one of my airsoft DMR's I've built: Mark Infinium. That represents the problems and parts I've already swapped and/or had to custom fit... Should fit this build nicely. Although I've sunk almost 6 years on to mine, but it does work from time to time and when it does it is sweet. Sort of like this machine :)

[@ricma9710]

more of these, we need to see what could be done with small amount of money

[@lukehowerter]

I apologize for such a basic comment, but where you mentioned the overclock for benchmarking was too agressive for everyday use, I get it in principle that this card was operating far above its originally designed spec. On the other hand, how do you determine what level of overclocking is suitable for long term use? Is it a rule-of-thumb multiplier of the original clock speed (i.e. I can usually go 1.25x the stated speed), or is it based on certain cues gathered from diagnostics and testing?

[@KarrasBastomi]

man... those r9 290x hot as hell..... even accelero iii cant handle..

[@Zyzz710]

75c is NOTHING for the 290s

[@RandarTheBarbarian]

When he started off I thought this build was going to be lame because he said it would play CS:GO and DOTA 2 my reaction being well yeah so can a potato, those games are popular because anyone can run them. Then out came the 290x and that made me feel slightly better. Not the parts I would have chosen for a used build but it looks cooler than what I personally chose so there's that

[@zhayward3190]

Down at the local Bunnings Bryan just casually delidding a cpu on a vice lol

[@BetterSounding]

can i run a R9-290x on a 500 psu?

[@Zyzz710]

only if it's a good 500w psu.

[@johannescoetzee1032]

Hi there! Could you possibly tell me what the VRM temps are looking like? I have the same card and cooler setup, but I used the included backplate heatsink. temps were not great on vrms

[@NSHG]

Gotta respect for having balls and sticking that unknown brand 600W in a PC with a R9. Though honestly, if it somehow has good internals (AcBel or Delta grade internals), I guess it's okay.

[@arsalanonlineofficial]

NirvanaShotgun yeah it’s a server grade PSU so it’s far more reliable than it looks at first glance

[@NSHG]

@@arsalanonlineofficial Yeah, figured that out eventually. Sells in japan, and also might be made in japan.

[@BinggomanLive]

How do you consider an overclock is healthy or not? My i7 7700K is at 4.9 GHz 1.355v with 85C max temp in stress test and 74C when gaming, is it a healthy OC or should I tone it down?

[@TheRailroad99]

where do you get these low-priced PSUs from? Here in Germany I can't get a psu below 25$, even used. (except some dubious extremely low quality eBay PSUs. but even these cost 30$ or more most of the time)

[@thoth8093]

Hi, can you show the Vore on the 290X ? +25mV looks a little to low for 1100/1400, or you have a very good card. Thanks.

[@FadNad0731]

where did you get those heatsinks for that r9 290x, I am specifically asking about the vram heatsinks.

[@AY-dw4om]

the gpu is not "thermal throttling" but amperage throttling thus hitting the manufacturer max power draw limit. make sure you added the plus 50% max allowed for the card when overclocking. if you did than maybe that's the max it can go.

[@brandongoh1797]

Hey Bryan i am currently running a 4690k on a Asus rog maximus vii ranger with a deepcool assassin which I find to be more than enough for my current settings of 4.6 ghz at 1.266v. I tried 4.7 but that required more than 1.3v which imo was too much of a voltage increase from 4.6. What would you say is a safe 24/7 V core as I don't mind bumping the volts to get more frequency from my chip as temps under load are around 60+°C.

[@HipocratesR]

beside the fps counter those MS or milliseconds stands for what? what do they mean, delay or what ??

[@DarkLinkAD]

I would love a video, comparing image quality of Gfx cards, i would imagine, older cards would have less compression and better quality at lower frame rates :)

[@thetrueinferno7993]

Hey dude, try cleaning the memory, had some ram I thought was dead but found it just needeed some cleaning. Also, on deliding, are their any other methods of doing so? I tried to delid with a smaller /cheaper vice and it nearly broke my 4790k(some off the top layer of the pcb came off) still works tho, so other metheds that might work? Cheers.

[@FairyCZeQ]

I've seen the same issue with the 2 memory slots not working before - it was actually due to a faulty CPU (i5-6400 in this case). Is it really the MoBo and not the CPU?

[@ariskoin9612]

look..i dont have a lot of money and i would like to try used but..i dont want to tey fixing a part that won't work properly..how should i buy used?could you give me some tips please..?

[@dubrbg]

what kind of thermal pads do you use on your graphics cards? also, how careful do you need to be about where you place them? thanks

[@astro_che]

I just got the best deal, a i5 4440 4gbs of ram and a half decent motherboard for 130NZD, I love it when sellers list the wrong thing :)

[@viktorkunov3969]

hi Brian. Big question here. What thermal pads did you use for the video card?

[@dulalg18]

Finally, Brian didn't say Tech "Yes" City.

[@hawkshot2001]

What was the hairdryer for? Was it to remove dust? Was it modified to have the heating element disabled?

[@Odin_Azazel_Extra]

what happened to your mafia 3 testing lol. my r9 290 non x has everything on ultra and manages to get 60fps so that's rather strange

[@Odin_Azazel_Extra]

Nar I only played it last week. I do enable morphological filtering in the driver so i can turn down the AA in game but other from that everything is maxed out at 1080p locked to 60fps

[@SemteVruchte]

I know im late but my OSD can't let it, at 1:35 it has to be Silencio case, not Silento, Cooler Master Silento doesn't exist, i'm sorry guys... xD

[@Jomenaa]

Mafia 3 surely is a piece of work to run. Somewhat decently stable 60fps atm but still dropping to mid 40 when driving fast in town. Not to mention the horrible graphical quality it presents when "stock". Some ReShade and tweaking and it looks like a game that I could somewhat put out to sell :D Maybe my Mafia glasses are too tight on my head but I still mostly enjoy that game, maybe bcuz I'm all about dem tweaks and workarounds.

[@brogamer4520]

my rx 480 is hitting 76c while gaming, is that normal ? should I change the thermal paste.

[@mylifestartsat8k]

I would call it "The Scavenger Pro 1"

[@MrGermanVideogames]

Can someone help me ? I have a 4770k and i cant overclock it so it would stay stable .... some advice ? 4,5GhZ @1,4 Volt is booting

[@tariqo16]

Just binging on tech yes city videos again

[@Mankiratsinghsehra]

Is mafia 3 not well optimised on pc? Because i don't think R290X is a slouch.

[@soccerzockt1518]

Ive a 290 cf setup, and its running every game on high settings on 4k. When Im not hitting 60 fps I either adjust the settings, or in the worst case I go to 1440p. Same is for non cf supported games, if not 4k, 1440p is also easily achieved by only 1 active card. And well, in winter I need no heater.

[@DarkLinkAD]

Power consumption will be up to the actual utilization. If you barely utilize, you barely consume.

[@smirnoffvodka2618]

guys i have a question about overclocking, i know a couple people that own gaming pcs and build them, one of them does it as work. and whenever i start about overclocking they always tell me that its the worst thing you can do because you destroy your pc and it overheats. is this bullshit or is overclocking something you really only should do when you have no other choice?

[@sparklauerei1]

What a sick build holy shit! and the price

[@joshpoot4195]

Hey Brian, have you ever had a look at a ID-COOLING FrostFlow 240G GPU Liquid Cooler as an option? Ive installed one of my r9 290x and it keeps it below 62 Degrees during the Aussie summer. Its only $109, pretty cheap compared to other gpu aio's!

[@hugolindholm4889]

Techcity would you say that 1.35v on an Qhqg I7 skylake CPU overclocked to 4ghz is to high if your temps are not higher then 70 degrees. Is it stable or will it impact its lifetime?

[@hugolindholm4889]

Sora Gasai If its not thermal throttling and everything in my system are stable but the CPU is pulling close to a 140-180 watt is it to high? What is good and what watt from the CPU are good?

[@hellblazer3781]

Great video mate.. Just one thing though if u could add the 1% lows and . 01% lows in your benchmarks please..