The BEST New Upgrades for Your Bambu Lab P1P, P1S, or X1C

[@thenextlayer]

HEY, YOU! Yeah yeah, you. Stop scrolling. Read this! Are you reading? OK, cool. Freaking THANK YOU for watching my video. Seriously. I really fricken appreciate it. You matter to me. Now, if you're also vibing, and appreciate me back, leave a comment or a like or something. No big deal. We don't have to be exclusive. K, thanks, love you, bye.

[@technicallyreal]

Thank YOU.. for not saying ObEXsidian :)

[@Goobicon4507]

Love what you do. Thank you. Stay safe.

[@marsrocket]

You got it. Thanks for producing such good content.

[@madmike171]

Dammit you convinced me to spend more money on a geometric build plate

[@alexvolodarsky8103]

I follow your channel. Great job! Thanks a lot ❤

[@Miked1332]

It's been a while since I've watched videos on BambuLab printer and upgrades, but that little moment you spoke about the "Mark of shame" with the dirty lead screws marking your hand and forearm? Ya I felt that big time. Happens every single time I reach into the printer, even when I don't feel that I touch the lead screws! Lol

[@rhadiem]

Just got my X1C, and it's amazing. Especially when you replace the glue-stick mess plate with the Bambu textured PEI plate. This thing is so freaking fantastic, I want a second one, both with AMS. The quality is so much better than my 5 other printers, and it's so painless. No regrets. Wish I bought it earlier. I'm not f-ing with it AT ALL. It's Perfect. If you want painless printing without a hobby tinkering project, get the X1C.

[@pedshred]

I guess we "have money to burn"

[@rhadiem]

@@pedshred Compared with what, having time to waste tinkering with things and troubleshooting failed prints that wasted hours? I would agree I prefer not wasting time. Not saying you have to get one, but I do think you would like it. Auto bed-leveling, auto z-offset, auto pressure-advance, AI fail detection, remote 1080p webcam monitoring and timelapse captures, wifi support without octoprint. It covers a lot of hassles. Think how many more high-value comments you could post on youtube. You could be super helpful criticizing other people for things you're jealous about, instead of maybe fixing your own life.

[@jet613]

Gosh I've spent a ton of money trying to "upgrade" my cr10 and enders to get them printing reliably and with good quality. Probably more at this point than a p1p. I wish the p1p was out back then. Worth spending more for a Piece of mind. No tinkering and more printing. Parts cost aside think about all of the labor in terms of cost wasted on those crap printers. Bambulabs p1p, x1c, or bed slingers are the way to go. I also want a second x1c

[@MarkFenimore]

Buy once, cry once!

[@2mitts]

Nice to know there's a out of the box solution coming for the LEDs. It's by far the biggest shortcoming of the X1C. I just did a small riser yesterday with Cobb LEDs and TPU gasket for the glass. By far my favorite the most worthwhile update to this printer. For those concerned about rattling, this thing's super snug and with the tpu gasket there is zero play.

[@Tethgar98]

Yeah I was really thrown off by him saying he's not "putting that garbage in his printer" in regards to an LED strip. did BTT pay him for that line 😂😂

[@hubertcumberdale8175]

Love that they named it after Sanjay. Guy was truly inspiring when talking about the innovations they were doing.

[@thereon1215]

Just ordered the P1S combo today, gonna be my first try at 3D printing. If I had known there were so many cheap and easy upgrades for this thing I would have got one sooner. Looking forward to what it can do. THanks for the vid, I'll be getting the screen as my first mod

[@fitchaj]

Just starting my foray into 3d printing and your productions have been invaluable. Very much appreciate your work.

[@EsotericArctos]

The big advantage of the X1C over the P1S, other than the touch screen, is LIDAR and the higher speed, higher resolution camera. IF you are doing engineering parts, the LiDAR and calibrated flow control make a significant difference. However, for the average home user, entthusiasts or maker, you will notice little difference between the P1S and the X1C. PErsonally, I am not doing super accurate engineering printing, so I am seriously looking at the P1S to replace my aging Ender 5. The Ender 5 has been good, but I have the choice, Bambu Lab that just works, or spend almost the same money on upgrades on the Ender 5 that may or may not work. For me, it's a no brainer as I am past upgrading for the sake of upgrading. I am now at the stage where I want things to work.

[@MiguelRodriguez2010]

BigTree Tech and Revo nozzles for the win 🙌🏼

[@hackiz]

Great! I love those X1 upgrade videos! Keep them coming!! 😁 But please do a thorough test of the hotends from E3D and Revo. That would be great! 😊 Love from Norway

[@Mikepet]

I got the Panda Jet Part cooling Duct. It is a real live changer, it is such an upgrade and your overhangs and flying lines get so much better.

[@thenextlayer]

I added it to one printer too it’s good.

[@LordWiseWolf]

I feel like 1. this video was made for me. 2. I should really just follow BigTree Tech lol. This was a much better video than the earlier bambu aftermarket video. Really great work.

[@thenextlayer]

Thank you so much! I’m always working on improving based on feedback from people like yourself… so keep it coming!

[@bonovoxel7527]

Recently I've seen on insta what looks like a P1P, but like...Mirrored, it's stripped down, and black, like the P1P. But has a big display in the X1C Fashion, but mounted at the right upper side. And it's branded BigTreeTech. And it claims to be even faster than Bambu's. That's when I started following them, few days ago. Pretty curious to see what they're on!@@thenextlayer

[@looxonline]

Follow along bro! We have been in this game since 2015 and are only just warming up the engines ;)

[@randymulhern1290]

Cool! A printer that runs great... wait i can make it like all the other printers, by messing with it. Sorry the upgrades for the horns are not what I'm looking for if it requires constant tweeking. That's not an upgrade it's turning a perfectly good printer into a tinkers toy again.

[@Crazy_Dave]

Great to see you doing more stuff for the Bambu printers. 👍

[@CrowClouds]

My favorite 3D printer channel. Really appreciate your work!

[@thenextlayer]

Wow, thanks!

[@hedleypepper1838]

1/4 the cost of the printer for a new hot end that gives results no worse than the original. But you don't need a spanner 😮 you have to be joking and oh yes you still have to buy the heat sink 😅 Whole advantage of the bamboo is it just works and doesn't need crazy expensive upgrades that don't make it better😊

[@hedleypepper1838]

I can see benefits of the screen and the cost is reasonable once the software is sorted 😊

[@Conargle]

I have a p1s and have been following xtouch for ages now. While I'm happy to do the DIY work it requires, a well polished pre-made alternative will always appeal to me. Especially since it's a 5inch screen which is currently not guaranteed with the xtouch version yet. Safe to say I'll be getting the panda screen

[@thenextlayer]

Bingo. Agreed.

[@stevejones9044]

Just received my P1S. I bought it even though I knew the display was not as good as X1 or even some competitor printers. I plan on doing the xtouch upgrade but I agree that a polished display that maybe is ready off the shelf would be better. I wouldn't expect one from Bamboo Lab because it conflicts with their product line up.

[@leowaterson2708]

Camera Replacement on P1S 3D Printer Hello, I have a P1S 3D printer and I wanted to ask if I could replace the default camera of the P1S with the camera from the X1 series ?

[@stephanecaron7203]

I dont know if you did a video on that but, what filament brand do you recommend for at least PLA and PETG on a Bambu Lab. Im almost a new owner, my P1S is supposed to arrive today, and Im interested in all that can help me with it. Thank you very much for this and all your video by the way ! You have a great way to present information, clear and entertaining, I feel like a friend is telling me about this stuff :) Great job !

[@BennyTygohome]

This was the first I've heard of 3rd party hotend and nozzles for bambu printers. Very cool. And that detachable screen is cool too. Great video, thank you.

[@thenextlayer]

Thanks for the kind words!

[@enosunim]

Wow! Big thanks for that rod sloth model! I am just going to upgrade to POM nut on my Ender 3, and it will surely will help me to remove all grease from Z screw! Once and for all = ) As you do not need to grease it anymore if you use POM nut on Z. = ) On the other hand, I think I can just detach the screw and wash it with a toothbrush and solvent, as it is easy on Ender 3. But anyways I think it is a good addon, for people who are oldfashioned and like to tinker with their printers = )

[@pinkpanther8427]

recently came to this channel and ngl i think some ppl just dislike because of he is israelian or living in israel. theres no reasonable reason to dislike this video. thanks for the content! good job and stay safe man.

[@criznash]

i dunno, his mispronunciation of "cache" might be worth a dislike lol

[@mnbytestube]

@6:52 not everyone is comfortable with electronics, wiring soldering and programming. It appears that Levi has not setup an xTouch before. There is no wiring, no soldering and no programming involved in the 5 minute process of letting the tool flash your screen and entering WiFi credentials into a JSON file. The interface isn't perfect but none of this is requires. Print and screw together an enclosure (actually this is optional) and plug in a USB cable to the hidden port in the printer. Teaching tech has a great video and a nice enclosure.

[@Lucianrider]

I haven't even gotten my P1S yet, (its on a ship heading to St. Lucia) but I already have two of the displays and will be setting it up so its ready by the time I unbox the printer!

[@JoshFisher567]

This. It can also be set up via a web browser similar to home assistant and esphome. There is a USB A port maybe 3 inches from where you would typically place it. Easier than troubleshooting a clogged nozzle IMO.

[@krismiller2002]

I updated my X1C and it is quiet now. I kinda miss the noise. (“woowoowoowoo,WOOWOOWOOWOO”). Now my P1P is singing the song of its people all alone 😢😅😂

[@bonjipoo]

Although you don’t really have any issues with cooling on the X1 it always seemed odd to me that Bambu labs directed the part cooling duct a bit high and it points some what at the side of the silicon sock. That’s something the Voron guys tried to avoid with their stealthburner because they found that it’s actually not great airflow to have the duct pointing at the heater block despite it being common practice.

[@saltwaterrook4638]

The options on the BTT site are kind of misleading. Do we need just the panda revo hotend or the "conversion kit" as well? Side note, given the fact you can use your phone or tablet with Bambu Handy, is there really any benefit of the touch screen?

[@boogle55]

For the LED strips I've heard Bambu only rate the 2-pin port for 300mA. The strips are all well over 1A, so I wouldn't use one of those, personally. The ones connected to the USB port are probably OK. Somewhat related, I have a riser on my P1S and have no additional rattles with the AMS mounted on top.

[@U1TR4F0RCE]

One thing that might be worth making a video of would be upgrades especially of the 3d printing kind for the Bambu Lab A1 Mini, I know personally I've tried the Ultimate Filament Spool Enclosure 封箱 for AMS Lite to try and have PETG work and have been curious but as a new user a bit cautious about the idea of printing stuff like the A1 Mini All-in-One Organizer. Since as an adult child I want to decrease hobby space when unneeded, but also don't want to waste filament.

[@benmerretz7200]

Glad this came up in my feed! Great video and channel.

[@mitchellsnoek1759]

Do you have a video comparison after upgrading p1s and a1 Bambu printers. Just interested in most mods and different value between the 2. Could you make a video of that?

[@Magnous06]

Yes, I would LOVE to see reviews covering high flow hotends for the X1C, and other accessories or upgrades.

[@davydatwood3158]

The "Panda" hotend is something I've been waiting for - it seemed like such an obvious collaboration, and adds some diversity to the Bambu parts chain. But it's too expensive for me, at least for now. The real value is in the cold-swap for nozzles, and I find I just don't change nozzles often enough. Granted I'd probably do it more if it was a little easier, but right now, that cost is out of my reach. Heck, I'm about to run out of filament and can't even afford to buy more of that! Still, that's a "me problem" and I'm glad to see this new option in the market. Hopefully it performs well and sticks around.

[@Trust_me_I_am_an_Engineer]

Thank you and keep up the fine videos, I'll keep smashing the like button ! The Revo sounds interesting, but 60W vs 48W means that heating current increases by 25% ( at full load ). Can the Bambu Lab circuitry handle that ?

[@looxonline]

Yessir!

[@cybergnetwork588]

Just ordered 2 x Biqu X1 nozzles. Currently running a Revo Micro on Prusa Mini+ and I love it. Thank you for your video, I spent money! 😂

[@WorldGroupMark]

keep the videos coming. I'm enjoying the content. I've had an ender 3 Pro I bought about 2 years ago. I'm looking at upgrading to a P1S or maybe a K1 Max what would you recommend?

[@ubiratamuniz]

I may consider myself quite a fanboy of the Revo ecossystem, even though the nozzles are quite expensive and the risk of bending them accidentally do exist (I have lost quite a few nozzles, specially when setting up my printers after rebuilding them). To be honest, I believe I´m the only one in Brazil using them for now (at least I haven´t seen any Brazilian videos about the Revo ecossystem and the only reason I haven´t done one myself is because I haven´t had the time or willpower to do it - I´m focusing on concluding my personal 3D printing projects, for now it´s the honeycomb wall - by your recommendation BTW... it´s getting awesome! first section is already concluded). Currently I´m using a Revo Six (12V core) on one of my rebuilt printers, and a Biqu H2S Revo (24V core) on the rebuilt Anycubic Mega X. I find it awesome that there´s a Revo option for the Bambulabs printers (although I think it´s unnecessary for the A1 series as it has its own quick swap system) but for me, personally, what matters the most (as I don´t have a Bambulabs printer and I don´t plan on buying one for now) is that Bigtreetech will now offer the high flow nozzles on their shop (which I can actually use on my current Revo printers). You see, for me it´s easier to source them from Chinese authorized resellers than directly from E3D in UK, mainly because of incompetence from Brazilian customs (they returned about 50% of my packages from E3D). I have to say that with all the bureaucratic difficulty that makes me rather stubborn on using Revo LOL. Maybe they will also carry replacement parts as well, such as heater cores and also Obxidian nozzles, which currently I can source only from E3D directly (which leads to looong delays due to Brazilian customs incompetence as mentioned) or from USA (with extorsive shipping rates). Currently the only available nozzles from Bigtreetech were the standard ones, hopefully they will also sell stand alone Obxidian and high flow nozzles as well now. Ordering them from BTT instead of directly from E3D will make things rather easier.

[@thenextlayer]

Makes sense!!!

[@technicallyreal]

RE: Upgrading the chamber fan to a Noctua - IIRC the main reason they run quieter in this specific use case is because they run at half the intended RPM due to the voltage difference. Basically just capping the max speed of the fan in hardware + money + effort. Better to just modify the filament profile to slow the fan down (it's in the gcode - and I think Bambu has already done this for their profiles in a recent update).

[@Validole]

The speed difference in RPM might be true. But Noctua _does also_ have great silence per unit of air moved due to good engineering.

[@technicallyreal]

@@Validole true but not twice as good to make up for it

[@bonovoxel7527]

I was checking that CFRP plate from FYSETC just 2 hours ago and it costs Ludicrous compared to the Bambu's, and even other custom plate competitors. With ludicrous I mean 166% obv, to say like 52€ instead of 30. And you're tellin me it doesn't even stick. 🤔I'm kinda confused from all the accessories I see out there, so THANKS for your content! I think I'll keep staring from a side for another while before buying stuff. The best for Bambu's has yet to come you said and, for example, I was having trouble understanding their nozzle/hotend system in order to (so I understood) have a full hotend assembly for each nozzle diameter, if I want to quickswap. Well, I was right: Probably those Panda's are going to be harder better and faster to swap than the original system. So thanks again!

[@JayrosModShop]

Getting a P1S soon, so this video excites me. And congrats on 100K subscribers! :)

[@docfarrar7242]

Great Content all around even for someone like me just buying my first printer in the next week. I am leaning to the P1S with the AMS and I am wondering if instead of buying a new screen for a P1 gen printer if I could use my last cell phone sitting in a box as a huge upgrade for an interface? I think I heard that the app was very effective and you could leave a charging port right there an print a mounting bracket to hold it on or near the printer. Any thoughts?

[@15martinbergman]

Great video, thanks for that. Do you have the link to the awesome spidey I saw there (@ 10:08). Been looking for one like that, but can't seem to find it.

[@Wasser-fz9ub]

Let's hope bambu supports you better than most of his other customers... I am waiting since three weeks for a final solution. I have the problem that the printer always says the front cover fell off...

[@phampham4018]

Can you please do a detail video of the panda touch! I constantly am looking for my details but you are the only one who unveiled it!

[@LordWiseWolf]

5:48 ok now that’s got me more interested. Since I learned about diamond back nozzles I’ve wanted one. But I just have a SV06, and I can’t justify spending $100 on a nozzle for a $240 printer. Just seems… not balanced. However I’ve ordered my first bambu printer, the P1S and now… I want the redo with the diamond back. I wonder how I can get revo on the SV06…..

[@thenextlayer]

Bingo. That’s the idea. I wonder if the SV06 will fit the Revo Six. It should, honestly. If not you could easily model and adapt some kind of printed part to make it work

[@bigtexuntex7825]

Revo Diamondback??!? So I gave up on Diamondback fitting my next printer out of the box because they seemed to never support the printers I was considering, so I focused on everything else and figured hardened steel was the best I would get...So revo. I had already made up my mind on the x1c with ams, I'll add a Revo to the list. That checks the last box for my fdm printer.

[@honi_g]

What about using the revo with diamondBack nozzel? how it will preform with engineering materials?

[@Trust_me_I_am_an_Engineer]

I'm totally with you on the extra lighting "solutions' for the X1C. IF I want to add it , I'll replace the top glass plate with a 3 mm clear glass plate. And add the LED on top of that so it stays outside the chamber. You could use acrylic if you're not confident in your glass cutting skills,🙂.

[@Stefan-xm6fv]

I have the same problem with "nozzle temperature malfunction", did the bambu's support helps you with it ?

[@thenextlayer]

Yeah need to replace the board

[@olive3365]

It's great to see you back to making videos in your studio again. Seeing how much your channel has grown in the last few months alone is incredible and it's cool seeing just how close you're getting to 80k (79.9k atm). Seeing a slightly more "open" environment around the Bambu printers is great even when they didn't exactly plan for such an environment. I hope you and yours are safe and have a great holiday season!

[@thenextlayer]

Thanks a ton!

[@goliathuas7624]

I can appreciate your eco concerns, The waste created by color switches can be significant. Can we find someone who recycles the filament into something useful? I'd spend a couple bucks to send our filapoop somewhere to be turned into recycled filament that is used for supports (for example)

[@Wooden_yeti]

So I was leaning towards the X1 Carbon Combo as my first printwr until you mentioned the fan noise. Are there any enclosed units that dont need a fan upgrade?

[@thenextlayer]

The X1C is still a damn good printer, just the aux fan is loud.

[@Wooden_yeti]

@@thenextlayer I work from home and I am pretty limited on space so this will sit at my desk with me that is also in my living room. Is that a realistic scenario for any printer?

[@andrewlondon3461]

Awesome video

[@thenextlayer]

Thanks!

[@James-wz7sj]

Please make a comprehensive review on all the hotend options for the bambu lab x1c

[@thenextlayer]

Good idea. I’ll ask e3D to send to me

[@erraddict]

How long and how much filament did you need for that hex wall? I'm considering doing that in my office

[@thenextlayer]

A long time and so much.

[@Arcadeic]

You really don’t need to touch screen. I’ve been living on a MakerBot Replicator+ and just received a P1S. For a normie getting into the game. The screen is fine. It chopped some price off the MSRP and I’m fine with that. I never need the screen except to bump the speed or stop. If you’re putting everything on SD cards.. possibly if you don’t name your files well enough and you forget what you put in the card. But the screen is fine for what it is. Yes if someone in the 3D printing world who’s had 30+ printers and has seen the world of screens, then yes. It’s like a Ferrari Owner complaining about a Honda Civic. But a first time driver would love the civic for the price.

[@thenextlayer]

Where I really get frustrated is the inability to map filament from the AMS via the P1S interface. Drives me nuts to have to go to the computer or phone to do it.

[@reggiefl7926]

Thanks for the great videos! MAN do I wish the Panda Revo's were still $59. Be safe out there

[@tozor9962]

@thenextlayer You have mention about someone (I could not understand from pronunciation) developing magnetically attached led strip. Can you add link to their product page or maybe other type of link where I can stay tunes for updates?

[@kaytrim]

I personally would like to see a video or two devoted to the Sovol SV06 plus upgrades. I have upgraded the part cooling fan. I have also purchased Sovol's Klipper pad but yet to install it. There really isn't much out there on their Klipper pad so it would be nice to see what additional upgrades could be added. I am thinking of adding the Switch wire Magprobe but don't know if it will work. I am also looking at the Enraged Rabbit Carrot Feeder to add multi material. Thanks for all your content and stay safe.

[@lucasthompson1650]

They renamed it "The Sanjay Mortimer Reprap Festival"? That's awesome.

[@RuskiVodkaaaa]

honestly bambu lab printers are the first 3d printers id rather leave stock (obviously excluding 3d printed mods like a fan muffler etc) then upgrade it...they're fantastic stock and Ive found they acutally have more issues when you start tinkering and upgrading them like the typical ender series printer. I changed the hot end shroud out for an after market one and ive had more failed prints with it... the only thing im hoping one day will be possible is upgrading the stock camera because the P1S camera is horrendous and the X1 isnt much better.

[@randalljames1]

YEP makes perfect sense to replace and upgrade something that has been 100% reliable... If I can't break it, no one can...

[@2krazyketos]

Can you share where I can find the File for the Filament spool brackets you are using on the honeycomb wall behind you

[@ryanmeredith6443]

The bond type that you are talking about at the 15min mark is called a heat stake.

[@sonub5401]

Yes, I’d love to see the video of the Panda hot ends.

[@UrbanCha0s]

Right now in the UK the P1P I can get for £549.00 (I have seen for £457), The A1 with AMS is £509. I'm torn on which to purchase, this is my first 3D Printer. Agree I lose the colour option with the P1P, but I can add that at a later date with the AMS, but which is the better for first time and value for money. Bed Slingers (A1) or XY (P1P)?

[@jayfontaine2464]

What are you planning on using it for

[@איילטטואני]

Great Video! Thanks!

[@AngriestAmerican]

Is there a way to get a USB adapter on the p1p instead of using the tiny little spec SD that I loose all the time?

[@teabagNBG]

i managed to get the overhang test almost perfect... All fans on 100 and door open + adaptive layer hight 0,08 on overhangs + overhang speed all set to 5... also it depends on the fillament...original orange works good , original greeen and mate black are both not so good...but still its a pita to setup... for example i have a figure with a hat there is no way to get the hat visor to print correctly without printing it seperatly...

[@CJGilliam]

With the touch screen, other than controlling the printers from across the room, which I can do with my phone, is there any other features that would justify the purchase?

[@thenextlayer]

Not needing to pull out your phone for simple things like changing filament. Mount it right on the printer if you want.

[@tonysfun]

Just subscribed your channel and thank you for your videos! I have SeeMeCNC Rostock II (upgraded from original Rostock that I purchased in 2013) and Creality Ender 5 Plus. I'm gonna sell my Rostock printer and so I started looking into my next printer. I like the Bambu printers with AMS bundle. But I hear that there are so many changes and I like to have a reliable printer with longevity! I do not plan to buy every couple of years another new printer. If you had to buy Bambu printer with AMS, what model would you buy? I also love that I can change the filament above the printer, rather than turning the printer to get to the filament! I do not need the color option, but it would be nice to have that option! My grand kids love when I add at least one color to some of the toys I've printed and now I can have up to 4 colors, that is nice. Is there a newer model in 2024 that I should hold for? I do not need the printer today, I can hold on for several month. I'm planning to get the printer sometimes in July or later. Again, Thank you for your help!

[@mmouse648]

Not sure if you're watching for replies, but I've been in this since 2015. I got an X1C just as they were coming out of Kickstarter and it easily blew away printers in the $3K range at that point. There's more competition now, but they're still the "go to" for a plug and play. The P1P is the cheaper option if you're up to doing some addons yourself, and there's a LOT of free or cheap ones that make it rival the X1C. The X1C if you're planning on doing high temp "engineering" type filaments like ABS and Polycarbonate for things like 'no' melt car accessories or heat exposed items. Otherwise, for "general" use, get the P1P and the Big Tree Tech Panda Touch screen for a plug and go setup. The AMS is A-MAZ-ING! Even without doing multicolor prints having 4 rolls ready to go instantly is a complete game changer! It's truly a "must have". Cheers!

[@AtotheC_1776]

Bro. I ordered the touchscreen before you even finished talking about it. 😁

[@kstew_fpv]

What Is the upgraded (quieter) auxiliary fan for the X1 called??

[@dazzauk8334]

To be fair with firmware updates the x1c touch screen is perfectly fine. But that p1p one is horrendous so i guess its perfect upgrade for that. And i have also not had any issue with bambus build plates. Not had a single adhesion issue. Now i would love to change the fan but im not confident enough for that unfortunately.

[@kawaiichi]

I'm not going to whip out $599 plus tax at the current sale price for p1s to then spend another £155 or whatever US dollar amount to upgrade a hotend

[@deusprogrammer_thekingofspace]

@@kawaiichi cool story bro

[@kawaiichi]

@@deusprogrammer_thekingofspace it's cool enough to make a movie series

[@snakesrcool]

Do you know if the p1p is going to receive the motor noise cancelling update?

[@andreasmaier4698]

Hey, Has anyone tested the Power of the used led Strip? I read that the main board can only deliver 0.3 Ampere?

[@GCheung55]

Thanks for pointing out these upgrades! I’m interested in the hotend/nozzles. So am I understanding this correctly that with the Panda hotend, I’d be able to swap with any REVO nozzle? The Panda hotend comes with a brass nozzle and I’d definitely want a hardened steel or something similar/better.

[@thenextlayer]

Bingo!

[@WilliamJewell-y7j]

It’s great to know you were at the Sanjay Mortimer festival a few weeks ago

[@Ich8in]

did i understand that right, if i use the revo system i´m no more able to use automatic flow calibration?

[@JesseStarrPhoto]

So, how does the P1s handle the slightly different z offset of a revo nozzle compared to stock? Do you have to adjust it?

[@looxonline]

We designed it so that the total length is identical.

[@JesseStarrPhoto]

@@looxonline that was what was said about the Revo for my prusa but I still had to change my z offsets significantly...

[@Duncanate]

Ordered a p1p from them 3 weeks ago. They said it would ship early January. So Bambu is a month behind on orders.

[@davidahn4130]

Love your videos; I just ordered the Panda Touch, should ship in March. I hope for peace between Israel and Palestine, and I hope you get home soon.

[@OfficialZeniFlow]

sadly there will be no peace between those two until Muslims put their guns down... and they wont, so Israel needs to make Muslims to put the guns down. If Israel did that, there would be no Israel

[@SevaValenzuela]

Me encantan tus video aparte de las toneladas de información única la edición de videos es genial. Ojalá puella llegar a esas calidades

[@thenextlayer]

Gracias! Has visto que tenemos the next layer en español?

[@SevaValenzuela]

@@thenextlayer si pero sinceramente prefiero este el éxito de tu canal aparte del contenido se debe a tu carisma y en español se pierde. Así que vas a tener q aprender español para hacer la traducción con tu voz 🤣

[@NitroVipers3]

I saw you used Blender to make a trashcan in one of your videos. I made something in blender way before I thought about getting a 3d printer. I just bought a used one of fb marketplace and want to turn my blender project into a real life item. Is it possible for you take make a video how to create something in blender and then 3d print it? Im new to blender and never 3d printed before im sure itll not be fun lol.

[@belenhedderich3330]

Hi as far as you know the screen only works with bambu? Wouldn''t be awesome tha tworks on Bambu and Voron at the same time?

[@thenextlayer]

Would be but no it’s only for Bambu

[@rangawal]

Any more info on the LED upgrade?

[@funnyprojects7330]

Hi, can you advise what to do if after a while my prints started not sticking to the bed? I have a problem with bambu p1S

[@thenextlayer]

Wash with Dawn dish soap.

[@DS-pk4eh]

What is the reason model X1C price difference vs P1S? They seems the same size.

[@monkeyfingerslocksport6429]

quick question did you re do the vibration calibration after changing the Nozzle and cooling duct ?

[@thenextlayer]

Yes it is done before every print

[@greglogan4443]

Would love to see a video of printing ABS and ASA on the P1S. I'm a bit hesitant as I've never used these filaments before. Thanks for your work J

[@thenextlayer]

I print them on there all the time works perfect

[@greglogan4443]

@thenextlayer is Ventilation an issue or is the carbon filter enough?

[@RushimaV]

The carbon filter only masks the scent, you must ventilate it properly especially with ABS and ASA@@greglogan4443

[@Validole]

​@@greglogan4443He has a video on air quality. Short version: not enough, but neither is any other "stick it in the enclosure" filter, if you actually care about the air quality in your working space. It does help though.

[@greglogan4443]

Just to update. I ran some esun abs+ with no issues on my p1s. Used the profile from the esun website. Stinks a bit, but kept the room door closed and opened the window when the print was finished. Would NOT be in the room at the same time/during

[@MaxBob-ec9os]

Hey does anyone know when the panda touch will be out. I will definitely get it.

[@thenextlayer]

It came out today. Https://jle.vi/pandatouch

[@harrybouch7907]

Please tell me more about this BigTreeTech LED strip 🤔

[@envt]

Bring them home❤

[@GlibShpychka]

The Panda Revo is not $59, it's $129. And your link in the description for it leads to the Panda touch (which is $59)

[@WilliamJewell-y7j]

So looking forward to the 100k event!

[@thenextlayer]

Us too!

[@Tomro82]

Wow I must have the screen and LED for my P1S. Will it be out soon and shipping to Israel, Jonathan?

[@thenextlayer]

Yes and yes. Sign up to be notified using the link in the description

[@looxonline]

You know it!

[@Farmboyjason]

You know it's gonna be great head when he puts his hair in a manbun.

[@jasondsimpson]

Please don’t say smash the like button. No one smashes it and it sounds lame. You are cooler than that.

[@thenextlayer]

lol ok

[@damron2]

do you have a video on how to print the spiderman in 10:06?

[@jneilliii]

I was curious about some of the chamber fan mufflers that have been floating around the 3d printing community. Maybe you could try one of those out to quiet the fan.

[@thenextlayer]

I have one on my X1C it doesn't make much of a difference