The Cargo Rack And Seats Go In The Rat Rod Wrecker, But It Shouldn't Have Been This Hard!

#fabrats #ratrodwrecker #offroadrecovery
Today we got the rest of the cargo rack done and the seats installed in the Rat Rod Wrecker, but not without a few blunders! Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More Videos You'll love:
Rat Rod Wrecker Playlist:
• Rat Rod Wrecker
Broke Down In A Strange Town With No Parts Store In Sight!
• Broke Down In A Strang...
NOW WHAT? We Got Ed's LJ20 That Was Stuck 40 Years In The Sierra Nevada Mountains.
• NOW WHAT? We Got Ed's ...
The Real Reason You Should Wedge Your Hood, Especially On The Rat Rod Wrecker!
• The Real Reason You Sh...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

[@Neel-xe1po]

"Center is going to be around the middle of it somewhere" 😆 🤣

[@trinkladd]

Poor Ben. I think y’all should rebuild his Jeep next. Only fair. Straighten frame. Get a new tub. Do some home made bumpers. Sliders. Racks. That’s your brother get him a big boy toy going. I’d support it. Who agrees ? Thumbs up this comment so fabrats can see it!

[@WildNwhEELING]

I have a 97 ZJ grand Cherokee leredo , I'd like to just barrow some sponsorships on 😂js

[@RiverbendJ]

Yep he does all the work..only fair

[@fomocoloco7172]

Next build for sure.

[@johnn919]

Fab Rats where are you??? It's Wednesday and I don't have my favorite video. Wednesday just isn't right without you. I hope all is well.

[@SamCanada1]

Anyone else find this channel calming? Kind of like ASMR for the mechanically inclined with a bit of family, humour and controlled chaos thrown in to round it off. 👍

[@UncleManuel]

Can we give a shoutout to Hunter, the human goat? He climbs all over the truck just to get THE camera shot - amazing! 😁😎🤟

[@larrydavidson3402]

If I had a third of Paul's talent I would be a happy camper.

[@mikemathis3936]

Today I learned that when Ben is groggy from a head cold, Paul has a lot harder time with bending and fitting tubes ;)

[@getoutwithrockandsherri]

Paul, thanks for taking a few moments to chat with an old couple from Pennsylvania on your day off. We love your channel!

[@DodgeDurango-de5po]

Kudos to Ben. You could tell he was under the weather, but still at the shop doing his thing👍

[@jamesdegraff]

"We are gonna bend this hoop in one piece"....Never mind. JK.. Love this build

[@unclebuck5051]

17:48 YES! Hey Grandma. Keep an eye on these guys, they'd be useless without you around, lol.

[@dougdean3134]

Something’s just become difficult when they shouldn’t be. Appreciate the levelheaded attitude in the middle of your frustration. Truck is coming along!

[@minidigger1000]

Your dad would be proud of you two boys great job

[@mountpearl1]

The best quote by Paul "center is going to be around the middle of it somewhere."

[@Trialnerror]

I can't tell you how happy it made me to watch you butcher those bends. Welcome to the club my friend. That's every time I use my bender.

[@RobFromOgden]

Ben reminds me of Al Borland from Home Improvement. You know the guy with all the wisdom. With Paul's struggles today does that make him Tim "The Tool Man" Taylor? Just messing... 😀

[@francesrice7898]

Ben I feel so sad for you today. I hate a head cold or any kind of cold. Take care and get well soon. I think Paul is worried about Ben. Paul teasing Hunter is fun because Hunter teases back. Lol love all of you guys. Take care and be safe. ❤️🙏🙏👍👍🌟🌟❤️

[@jordanlovis3645]

I love Michelle's use of sarcasm in the editing!

[@jeffstansell9546]

Truck is coming along fine especially with all the hiccups along the way. It’s entertaining & educational for many! Just wish KZbin was around 20-30 years ago then maybe I would have a side hobby!

[@robertcarnaz4326]

I like watching the channel. The editing (or not) shows how a project really gets done… the screw-ups and all. It makes me feel human, when I do my own screw-ups… so don’t change it, and become what nobody is… PERFECT

[@pieterv6984]

well said

[@corygreen8226]

Yup that’s why I watch!!

[@jeffrentsch4318]

I started because off road, got way into YJ, and busted ankle. Love all the folks in and around your shop. Any way now that I can get in my shop, yep mistakes, still like all the folks especially Mashe

[@anitaallen4143]

I kinda liked that little banjo thing when things went wrong. Made me laugh.

[@fleetofwjs1893]

Paul at 8:28 "how did this happen" is the Fab Rats version of Staples' "that was easy". Grandma Lollys reaction was priceless.

[@redcanyonoutdoorquest6220]

Ben… Thera Flu. After being a diver over 30 years that stuff works better than anything known to man.. consistently. Love watching the progress on this. Thanks a bunch gentlemen.

[@samuelcrossland1101]

The one piece magic compound tube bend is a pipe dream. Running conduit in buildings nothing is is flat, square, or perfect. Vehicles are likely more difficult. Use short pieces for a template has been my best experience. "Did it right because you did it twice"

[@jeffchimileski6283]

So positive, so pleasant so family friendly. Good role models for all.

[@alexapril656]

The welder tip touchin the seat😂😂😂😂😂😂 That got me It’s looking good fab rats

[@alexapril656]

@paul_giveaway.. Oh wow Thank you What’s the process to receive 😁

[@hughminnich8581]

Good Morning Fab Rats!

[@Ty-bz7zx]

"The center is going to be somewhere around the middle" =)) Always a blast here with Fab Rats ! =))

[@e.s.bryant765]

Maybe, just maybe I have a tip for you. I was a pipe welder, instrumentation bender for many years. I always start to the left side of my bends, and bend in order from left to right. All you need then is the "take-out" of your bender from 0 to next 90. Always put the left measurment first, and always have the bend to your right.

[@dalegereaux1863]

I wonder if Hunter is part mountain goat, the way he climbs up on top of the truck to get the good camera angles ? Atta boy, Hunter ! 👍

[@joemcintyre2090]

I like where you said "center is around the middle of it"

[@terryhayward7905]

Obviously a different bend radius between the 2 pipe benders. You should fit the same radios that Matt has in his trucks so you can all talk on big jobs.

[@Cycle9568]

Don’t need to have the same radios…just need to be on the same frequency.

[@terryhayward7905]

@@Cycle9568 very true, as long as the coding is the same. Most radios these days use some form of cryptographic coding in their modulation.

[@tuddsmithers7101]

Bending that tube in the right place to the right angle would be a first rate headache. The wrecker is really looking good, play through.

[@paulabes4220]

As someone who has a background in building NHRA legal chassis and cages I know how frustrating bending tube can be sometimes. I just want to thank you for all the laughs I had watching you work on that one tube. I lay mine out using math then I have pre marked test bends that starts at a fixed mark on my bender then you have the measured test piece you can tell how much the tube shrinks and tell where the center of the bend is.

[@Patrick.Weightman]

I love how Hunter tried flipping you crap for """old movies""" when the last two were Austin Powers and The Wedding Singer 😂😂 Don't forget this is the dude who said he's seen all of Adam Sandler!

[@michaelinorlando8507]

Piece by piece. It's gett'n there. When Ben grins he is one Kris-Kringle-look'n feller!

[@cloverdalerail1093]

I’m really liking to see Ben behind the wheel of this truck for rescues……. He looks the part.

[@mrmike115]

Paul should call that tow truck Frankenstein! LoL the way it's all oiled together 🤣🤣🤣

[@ronaldcamp6757]

I am continually impressed by your problem solving skills, Paul. I see the problem and see an easy solution and you think about it for a while and they come up with an elegant solution that also solves the next three problems. My hat if off to you! You have problem solving skills that are unequalled in my experience. Keep going you have my attention!

[@xvsj5833]

Totally love your content Paul !!! Shoutout to Ben and Hunter for completing the Fab Rats Team ❤✌️👍

[@leolines6024]

After watching you make this rack now I know why the nugget to so long to get done LOL 😆

[@hillbillyhippie597]

How is Paul not 500lbs the man is always eating 🤣😂🍻🇺🇸🤙🏻

[@ElectronicMechanic50]

It's called a high metabolism lol Also he seems like he never sits still for too long so he probably burns most of it!

[@qiuckresponseforcetowingqr1248]

Because he's always moving.

[@brianeisenga882]

He hasn't hit 50 yet.

[@airic2897]

A lot of sugar and carbs so it won't keep you full as long as protein. But you need those sugar and carbs( and fats) for your brain, it consumes like 25% of your calories, especially when you eyechrometer everything lol.

[@Friend_of_the_One-Eyed_Ladies]

10:29 is a really cool camera shot with the fan slowly spinning overhead.

[@skwent]

At 3:27, "Center's going to be around the middle of it somewhere". Love it!

[@madcapmagician6018]

best quote from happy glimoure... "PRICE IS WRONG BOB!!!!" 🤣🤣🤣🤣

[@CMC61]

Ben really makes your videos fun to watch, we need more Ben!

[@donovanyazzie2615]

Good morning fab rats. When you guys are done with wrecker should show pictures of the evolution of the of the wrecker. It has come a long ways since it was your dads. And as always God bless you and your family

[@vinniebuiltRC]

Hey Paul you should try doing all those bands when your pipes have to screw together perfectly no welding

[@mikekuczynski1552]

Paul’s biorhythms we’re off in the beginning and the bender couldn’t quite find center but all is good . Rack looks nice seats are in , finish welding seat frame and locate 5 point seat belt harness attaching point , done ✅

[@devengray4898]

One piece at a time and it didn’t cost me a dime you’ll know it’s me when I come through your town. Riding around in style gonna drive everybody wild- Jonny Cash

[@leewilson6818]

Suggestion if you take a piece of wire stiff wire and bend it first to the Benz that you need and then lay that on top of your pipe in your Bender it works so much easier that's why you do mufflers underneath the car too just a suggestion

[@patrickvaugn897]

I enjoy being encouraging and expressing constructive words....this rack has me at a loss 🤣. Someone give Paul a snickers

[@Beandiptheredneck]

"That's your home ball... don't you wanna go home?!?" 😅 I love happy Gilmore, most Adam Sandler movies really

[@dustinmeier9753]

@3:27 … Life changing fabrication secret right here. Learn this. Memorize this. Live by this. “The center of it is going to be around the middle of it somewhere.” That’s T-Shirt worthy right there. 😂

[@KENNEY1023]

One thing I've learned from making the roll cage and roof rack is it sounds easy enough but is actually really hard to get right. As always impressive work.

[@stubbingtonmarigold3032]

Anybody who has had to put 3 bends in one piece of pipe has learned that the hard way.

[@calholli]

Michelle, Please have Paul read this: You have to take some practice pipe-- and measure say 12" to a desired bend; Bend it at your 12" mark; and then measure what the ACTUAL length ended up being (lets say it ended up being 14 3/4")-- then you'll know that 2 3/4" is your offset for that particular die- at that given pipe size. So on every other bend after that, you'll know to simply subtract your offset from the length you want, and you'll land on the right bend every time/ rather than guessing. Cheers.

[@haroldphipps3457]

@@calholli bend tech pro calls that "calibrating your dies" Excellent advice !!!

[@knightshappyfarm]

The wisdom of Paul; "If ya can't do it right at least be entertaining".

[@robertwazniak9495]

i am reminded of a statement that my father used when I FINALLY succeeded in a task like this... "Even a blind chicken stumbles upon a kernel of corn one in a while... "

[@Bolie420]

I’m 31 and when people don’t get movie quotes from the 2000s it makes me start to feel old too.

[@carson7937]

As an electrician that’s bent a stick or two of conduit this gave me way too much anxiety.

[@Bigdaddyslasher]

I have seen roll off boxes full of badly bent conduit and stainless steel tubing on job sites LOL

[@oneshotpete6.591]

@@Bigdaddyslasher yup 👍🏼 on their way to the scrap yard …

[@jcar1417]

Actually Paul could have used some 1/2 conduit and bent the basket and then used it as a template. Would have been a lot cheaper. Also I never bend to centre of bend I bend to outside dimensions

[@Cr480mx]

I second this.

[@randallcammack6932]

A lesson in conduit bending would help also figure out the necessary marks on the shoe

[@DeanF]

Okay -here's how much I love Fab Rats.... I am watching BEFORE Goonzquad's drop...

[@beaglebrothers1]

Nice to see Grandma Lolly come in and keep you guys in line from time to time. But.....WHERE'S the boss..?? The wrecker is looking great. Love watching the progress of each project..!!

[@nickgonzales9654]

“Center is gonna be around the middle of it somewhere” nice Paul lol

[@marklegato]

Paul's quote of the day: Centre's going to be around the middle of it somewhere.

[@strokerace3584]

Instead of writers block Paul had benders block that day! Lol! Thanks for the hard work to all of you at Fab Rats.

[@tscotom]

Now, that's a REAL FAB RACK ... Phew !!! 😆😄

[@ourlifeinwashington4114]

Man I hope you paint it and make it look nice. Paint it white then stress the paint to make it look old. Love you guys. God bless

[@ingluv]

As an electrician, I tend to make "start of bend" marks when using a JD2 style bender. It's how I'm used to marking for conduit benders. Whenever I use center of bend, I make mistakes. Just keep a scrap bent 90* to hold in place to measure to.

[@SADDLEHORN1A1]

Only people that have built their own rig have a true appreciation for how much work it actually is. Even more so by yourself because you have to come up with novel ways of getting things done with no help.

[@pieterv6984]

The more I watch this channel, the more I appreciate the people in it.

[@micahhenry4998]

Grandma always makes the video better awesome work on the roof rack and seats

[@Deven210]

Paul we all have bad days man. Screw ups are a part of life. Don’t take it so hard on yourself lol.

[@brentcason4353]

Don’t forget cup holders Paul and Ben gotta have cup holders for that Mountain Dew.

[@ateamoffroad1179]

Paul a little trick I learned over the years when bending pipe, doing a box like that use the same shoe even if the pipe is smaller so your bend radius is the same. And your 90s will match from your large tube to your small tube.

[@jss6060]

A little trick I’ve used when bending DOM is I start with electrical conduit. A 3/4 inch conduit bender has a 6 inch bend radius which matched my tube bender dies. I bend the conduit for every radius. Rotate every bend to where I need it, cut them to size, Tack it all together and use that as a template to make my final bends on the DOM. Just did a roll cage and every final bend was perfect. No wasted DOM. Worked for me, might work for you

[@haroldphipps3457]

There is also "Bend Tech Pro". I wasn't a believer, till a dragster builder helped us bend some DOM tube, and then some expensive S.S. tube for a diving platform on a boat. The formulas are on his phone, And it makes a HUGE difference! If you don't like your JD2 knockoff, get a MITTLER BROTHERS bender, or the Baliegh knock off. Bailey might be up for sponsoring a fab channel. (Just sayin).

[@1one3_Racing]

I just use a cheater bar and hold it where I need it. Then I can make it whatever size and radius I have. Cost me about $4.50 each

[@jss6060]

@@1one3_Racing yes, that works great and I do that too, but with sections that have multiple bends I use the conduit trick

[@mrromantimothy]

All you need to do is Mark where the star is or the mark on the die and deduct 6 in, or whatever it is it goes up 1 in for larger size and always measure to the back of your bend, but there will be times when you're bending from the other end and you will have to use half that deduction.

[@ryanslaback9418]

I've developed the habit of always installing recovery hooks with through bolts and nuts. Lots easier to deal with when someone shears off the fasteners.

[@tmfishingonabudget7486]

It's coming together because Ben is getting better 😂😂

[@JeepnJeff]

Nice to see Paul finally got a tube bender.

[@mikemiller9119]

😂😂😂 funny Paul. He says “we” when he’s not confident on his work, but says “I” when he is confident or gets something right.

[@earthlifeus1656]

That roof rack is like on the 1960' to 70's station wagon.

[@paulquiroz4070]

It is coming along... looking better ever week... Congrats guys....

[@billhorterjr1982]

Cool seeing you 2 in the seats in "Dad's" truck, Not gonna lie, Extra special build knowing the history, gonna be a really useful rig! Thanks for bringing us along.

[@colinmoorelovethemusiclook6506]

Hey Paul & Ben, you should put on full time Grandma Lolly, she would make a great supervisor. Great job boys & Hunter

[@terrallputnam7979]

This video reminded me of the three stooges video where they were all plumbers in one bathtub trying to stop a leak. LoL very entertaining 😀

[@stuartpulvermacher6861]

You should've hired a good electrician to bend that rack up we are pro's at measuring and bending tubing LOL

[@detroitdiy]

The roof rack definitely challenged Paul. I think he was under nourished and his brain wasn't firing on all cylinders. Happens to the best of us. Get well soon Ben.

[@i-_-am-_-g1467]

Bending is an art for not a science 😂🤘🏻

[@johngoodwin8889]

Reminds me of the roof racks you used to see on 1950 ford woody wagons

[@UmmmmmmmWhat]

Spoonful of Marvel Mystery Oil like the forklift might help. 😆

[@majorpayne4098]

Needs more energy drinks to get brain to 100% power mode

[@dananderson2786]

Ps please start doing readers rides! Like the magazine days before the interweb..

[@Stephenja]

G'day guys. Tow truck is looking great. Roof top tray is going to be nice and strong.

[@enjoylife6311]

I wonder how many welders out there knew he was going to burn that seat with the wire before he did it. I did lol

[@jennawp1]

Paul, isn't it Hunter's job to record your EVERY move, mistakes included. Thank you for another great video! Love watching the Rat Rod Wrecker come together!!! Please please please also reorder some 2XL zip up hoodies. By the time I got to the site they were sold out!!!!! My husband and I prefer zip up hoodies over the pullover. Was hoping to get one before they sold out.

[@bobsmith2521]

Bending pipe is difficult! I’m a commercial electrician so lots of bending large conduit with similar machines.. I love doing it but it can get complicated! You guys do awesome work

[@LAP1050]

Paul and Ben, you guys consistently work the safest out of your group of KZbin friends, which will remain un-named👍 Another great video, by the way. Question; will you be shielding the gas tank from the sun so you’re not cooking the gas during those hot summers?

[@bradywilliams2666]

I was sitting here thinking, if that was my I'd have burned the seats already. Then bam you did. LOL

[@billclisham8668]

Paul, I've got a million dollar idea for you. You should fab up a stacked bender die so you can bend two pieces of tube exactly the same at the same time. Only drawback is if you screw up it kills twice as much tube.

[@eformance]

I read "Paul is making a spacer" as "Paul is making space disappear". 😄

[@stevesherick6846]

I managed an undercar shop for 10 years and got involved in a lot of "projects" using exhaust tubing and believe me you only have to be off a gnats whisker and your whole idea can go up in sparks!

[@treborheminway3814]

That Sand Hollow Off-Road speed shifter is pretty cool looking.

[@Tomcroese]

Yes, that was nice seats, and sooo much adjustable......Yes it fits, one!

[@paulcooper2897]

Center's going to be around the middle of it YES! Someone who thinks like me!

[@capt.johnstikitours5665]

"The center's gonna be in the middle of the bend somewhere" Hahahah

[@douglemmons2583]

Matt's wrecker looks pretty sick, but I'm going to be team fab rats all the way!!

[@josephfarnworth9789]

Just got back from my 4:00am run and know Fab rats the day just can't get better thanks you for helping make my day better

[@genethecook2300]

Lol uh... Paul, I have to get to differ. However that is a great quote, my opinion is "The price is wrong BOB!" And then he gets the crap kicked out of him by Bob Barker that is priceless best quote in the movie I feel. LOL I love you guys love what you do hope you had a great Thanksgiving! Great job on the vids Michelle. Great cameos. Hehehe