THE SECRET IS OUT! Here's How I Finish My 3D Prints!

▼ MENTIONED IN THIS VIDEO
Primers, Paints, and more! | amzn.to/3jQsfkO
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
PRINT BED FILAMENT | www.printbed.com
☞ Use Code “Frank” at checkout for $4 off a roll of filament!
NIKKO INDUSTRIES| www.nikkoindustries.com/
☞ Use Code “Franklybuilt” at checkout for 20% off awesome files!
Disclaimer- This video is NOT sponsored by any of the brands mentioned above or throughout this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#3DPrinting #Cosplay #Painting

[@buckaroosan5571]

For detail areas, I love to glue down sand paper to various popcicle sticks. I can cut the ends to fit what ever shape I need to to get into the finer lines.

[@JZM006]

would probably be easier to get a small file set

[@GeezNutz]

@@JZM006 Really fine files aren't always small or bendable.

[@yeahh_idk_]

they do have sanding stick that you can cut to size, basically what youre doing but much easier to use and cut to size.

[@LordTunezilla]

This is a solid tip. I've wrapped on itself and glued it down around a cue tip for really small areas.

[@Noah_Bisch]

I can't belive how much your quality has improved after coming to America. Idk if it's just me but it looks like you have gotten a new camera and/or lense and you have way better lightning. Enjoying it all. Stay safe and God Bless You Frank!!

[@FranklyBuilt]

Thanks so much man! Just better lighting haha

[@deeznuts23yearsago]

@@FranklyBuiltbetter lighting because you actually have sun now lucky bastard lol

[@grimairbrush]

hi, from a spray painter, id suggest hitting the primer with a 'guide' coat preferably made from the same type of paint that you intend to use in the base coat etc, this will give you an idea of high and low spots that need addressing, another tip, if your doing a rub try the Createx brand of paint and dap or rub these with a rag, being a water based paint it takes to all paints and allows the 1k or 2k top coats, great for weathering and im using the createx black with another project im doing at the moment.

[@SaharRazavi]

It's really nice of you to share your experiences so detailed 😊🌸🌸

[@Dayquan_Bonqweeqwee]

This video helped me a lot . I have a lot of unfinished prints I need to get done and this helped me get an idea of what I would need for certain projects. 👏🏻👏🏻👏🏻👏🏻

[@colegonzales6535]

Holy CRAP I just discovered this videe. This is the single best 3D printing videos I've ever seen. So freaking packed with solutions and affirmations to problems I've faced over the last year and a half. Thanks for the top notch content man!

[@theatomicartist6991]

This video helped so much, i really appreciate the time you put into helping the 3d printing community

[@jasonjulian1]

Great video Frank! As always! My issue has always been dust collection on my parts as they are drying/curing. Even in a location that should be clean.

[@waqarsiddiqui3608]

That key blade looks beautiful. Hoping I can get to this level one day!

[@TJ10033]

Another great video frank 👍 it did help me so much and i learned alot from it. Now I go to test my paints before I paint my MK85 IRONMAN suit. Thanks again 👍

[@adamroose2028]

I recently got my first printer and finished my first helmet, the finish leaves some to be desired but overall i think it came out pretty well. Thanks for convincing me to give it a go, perhaps one day mine will come out as well as yours.

[@MikeLeader]

9:45 that moment when your favorite 3D printer youtuber has the same car as you 😁 Gen Coupe Squad 👌

[@joelsimon1000]

Great video man. You’re definitely right about trial and experiment in paint. I’ve had some really cool results using some rustoleum dark steel and rustoleum aged rust gives a good gold/brown starburst effect. Using it on a caster gun from outlaw star if you’re familiar with that show. Keep up the good work buddy.

[@toppingpilot2097]

Damn bro nearly on 250 k cant wait to see you hit 500k then 1mil dont forget us when you get to 1 mil

[@jasonsR2D2]

Great video, thanks for sharing! I've been using a few of the Dupli-Color products and I'm anxious to try out the 1k clear. I love their metallics, but they really haze over when exposed to any sort of humidity, so I'm often forced to paint in my basement. Do you typically sand your topcoats before applying your clear? Thanks again for your channel - you've inspired me to take on a few side projects and the quality of my finishes has already improved dramatically!

[@GalaxyBuilt]

Great stuff man. My paint options here in Okinawa are super limited. I hope to be heading stateside soon to get in on some of these great options you're finding.

[@SprayNPlay]

I was just looking for a video like this, and this had all the answers before i started spraying thank you!

[@Davesbrickfilms]

So helpful thank you🙏

[@juliosoares8]

Just THANK YOU for this content, awesome!!

[@mathewtom30]

Actually I am not hear to lear how to finish 3d print stuff I don't even have a printer, just hear to watch u make such awesome stuff and great content 👍 keep it up nice video,I am now really interested in 3d printed stuff only by watching ur videos even though I don't have a printer it is super fun watching and learning about 3d printing👍

[@FranklyBuilt]

Wel thanks so much man!

[@mathewtom30]

@@FranklyBuilt thankyou man for commenting and for the heart ❤️,great work 👍👍big fan of ur work

[@learningtolivewithhumans1859]

i use watered down wall filler on mine its so good and sands down like a dream , wicked vid bro

[@maxavatarbarnett3613]

Hey Frank, great video as always, super helpful. Do you have any experience using a gloss clear coat as part of the priming phase to get a really smooth and shiny base, onto which you can then put a metallic? Thank you so much

[@RyanBischoffPercussion]

I’m working on my first painting 3D print experience on a mando helmet and I’m learning I need to learn more about doing it. Tape pulling up paint and rubber bands to glue on the ears is screwing up the paint too. :/ your videos are definitely going to help me in the future.

[@scottthomas7103]

Great video frank. I am going to try out some of these techniques for my winter solider arm i just finished printing.(I want that SOB shiny silver!!) Gloves (sizing and assembly) would be a good video.

[@FranklyBuilt]

I actually already have that video haha

[@bigblue1287]

Nice Frank!!!

[@ChrisBoshProps]

Very awesome Frank. I've been using the Duplicolor Filler Primer for some years now on prints and I absolutely love it. I used the 1K Duplicolor clear on my Robocop suit and fell in love with it. Great stuff look forward to more of your work, your channel has been an inspiration. I'm curious how much damage.... scuffs, scrapes, cracks did your suit take at the recent comic con you went to? I'm wondering how well the 1k clear held up.

[@FranklyBuilt]

It took a fair amount of damage! You’ll see in tomorrow’s video actually

[@ChrisBoshProps]

Fantastic. I'm sure it will really help some of us building suits on what to expect when we wear them out. Look forward to it and thanks for the reply!

[@aFishingRodMC]

hey frank!! What kinds of paint, primer, palm sander, and other materials or needs do u recomend?😊 (edit: for mark 85)

[@khurram4ss]

Thats a nice guide Frank. I hope you will start using spray gun one day and I anxiously wait for that day 😉

[@futureprojectscosplay]

Awesome 🔥🔥

[@magicmanac]

I finally almost got the filling priming and sanding down lol. Still can't get the the shine you have on the paint. Living in NC I know how the weather is down here and I have to paint outside which is part of the problem

[@michaelnewton9381]

Only just recently started following your vids, which I will say you're doing a badass job. But being in the service myself how do you find the time to be able to put so much into this hobby lol. Just bought a cr-10s pro v2 and getting ready to jump back into this.

[@FranklyBuilt]

Magic haha

[@jankybackjack5698]

Great video and so much useful information! I am in the UK and it infuriates me I can't get the bondo glazing putty unless paying ridiculous prices for it. Do you prefer Bondo or woodfiller? Any noteable differences? Would it be worth paying the extra for Bondo? Appreciate any info you can give :)

[@CJashua]

So Frank... that Oathkeeper Keyblade.. details please!

[@aj_art8058]

When using 2k, do you have to wear a full spray protection suit or is a mask and just regular jumpers enough to protect from the vapour?

[@g0d0fninjas90]

rust-oleum does have a paint+primer in one spray can. Is that recommended or is it better to get the fillable + sandable primer then a normal paint can?

[@HenryCreations]

Wow! Michael Keaton turns 70! Haha great video man!

[@marksneyd1262]

As usual a great video. I’m in the UK so what do you suggest for a sandable primer?

[@tanmanplayz9634]

what is the orbital sander that you use? I'm looking for one and want to make sure that it's actually good.

[@doombringer35]

Nice info

[@ralphpizarro6093]

Have you tried the Valspar bonding paint to you prints I've had a different impact on the way the paint sticks to the print

[@LordKalak]

Hey Frank, love these tutorials on finishing! Do you continue to use the machine sanders once you've started using filler/primer, or do you switch to pure hand sanding at that point?

[@FranklyBuilt]

Usually switch to hand at that point

[@LordKalak]

@@FranklyBuilt thanks!! I'm just doing the last touch ups on my Mando now before starting the paint tests/attempts. Can't say how many hours I've watched your stuff to get me this far, nor can I thank you enough for making 3D print info so digestible and available

[@timothy3848]

Best way (for me) to smooth your prints is 3d UV resin just tried it with my 3d printed bat suit. I never finished any 3d prints so fast. Not even with filler Primer

[@timelordd]

Great video Frank! What clear coat did you use on the nova helmet?

[@FranklyBuilt]

1k Duplicolor

[@joeespinosa2030]

Is that graphite covered with the 1k? Doing a mandolorian and this looks like a good method.

[@doomdoomtv316]

Have you used chameleon paint before? I'm making the shimmering aurora blade from guild wars 2 and want to use that sort of paint but I'm not sure about how they take a clear coat. I don't really want to pay import fees if the paint looks horrible after coating it. Any advice would be great

[@lvedder99]

If you print at a smaller height, does your material use increase or just time?

[@xorNStudio]

How do you deal with the chrome one ? No clear coat then ? I want do display one of my print but I'm afraid it will ruin the "chrome mirror" effect.

[@ghostboi817]

Can't wait for the Iron Mando and the Godkiller videos.

[@gettingfitat5015]

Great video as always!!! More good tips as I'm getting ready to finish 5 friggin helmets! ;-) ...so can you only get the 1K clear on Amazon? Or is there a place locally that you find it?

[@FranklyBuilt]

Most auto parts stores

[@TNTBoyBoy]

hey im printing the mk85 helmet and i got everything you used on yours ...was wondering you have alot of videos to go through ...do you have a video that shows you actually finishing a helmet? like actualy watching you sand, prime, paint, wet sand, buff? because i want my helmet to have a car like reflection to it

[@justinpederson9481]

Good stuff! I have a question. I'm wanting to print the Master Sword from Zelda. I want the handle to be deep blue, but I only have cobalt blue filament. I would like to know if there is a way to get the color change I want, without just spray painting over the cobalt blue. Maybe a thin, dark polish? I'm not sure, I would love any help I can get! Thanks!!

[@Dirtydeviantjbyrd]

What do you think about using vinyl graphics on some 3D prints? Just curious about what you thought about it. I have a Vinyl cutter that I make my own decals. Not a cricket but a normal style.

[@thegeekmeister1292]

I wanna start 3d printing

[@berniemailloux6300]

Great video u have any suggestions for ironman visor hinges preferably 3d printing some?

[@FranklyBuilt]

I have tutorials on that too

[@snowwolvesproductions]

I used the red metallic paint you have there and it dried with a haze... Humidity? I don't know... I already use the duplicolor. I didn't have a lot of good luck with rustoleum. Especially with clear coats. Thanks for the videos!!!

[@IowaMan]

did you clear coat the metallic paint?

[@hbc865]

ok, I used metal cast paints before on a bike, using the metal chrome first then the tint, it came out looking anodized. How did the blotches appear on the Captain America shield, was it too much chrome paint or too fast painting, or the tinted paint was applied too much I want to paint the Madelorian suit/armor all in Metal Cast Blue I want a clean shine look like your Iron Man suit, Thank you for all your vids I'm not gonna lie I binge at work.

[@raimiallpowerful2020]

I really love that godkiller helmet I love comic builds between the movie stuff. where did you get that file because I looked on DO3D?

[@FranklyBuilt]

Johan 3D

[@Auddizle89]

Hey Frank, I already have a ender 3 and am wanting to get into making helmets in 1 shot, other bigger projects/props, in you're opinion what would be the best printer I should get to make these?

[@ljchallengerz4922]

I would recommend just getting a regular cr-10 as it acts similar to the ender 3 but the build plate is bigger. Hope this helps. 👍

[@FranklyBuilt]

Ender 3 max or something 300x300. I actually wouldn’t recommend abnormal cr-10; they’re kinda dated now

[@charlesforbin6937]

Hey Frank.....where do get most of your PLA (Mainly) and what's the cost work out on Indv. or in bulk.....Thanks.....

[@FranklyBuilt]

Bulk usually right from the supplier

[@hobbyistanonymous1293]

I cannot get the metalcast to work with that rust oleum metallic paint. It immediately starts beading off. I have wasted so much time, but finally found something that it works with.

[@FranklyBuilt]

It’s either cause you’re spraying too heavy or using the chrome metallic Rustoleum which doesnt work with it

[@zacattack5783]

Hey Frank, In your video I notice you have the 1k matte finish clear coat. Do you use both the matte finish and glossy finish for specific projects or does the matte finish still give you the mirror finish?

[@FranklyBuilt]

Matte is matte. The opposite of Gloss. I use matte on some projects but definitely not shiny metal iron man helmets

[@zacattack5783]

@@FranklyBuilt Got it. Shouldve assumed there was a gloss type. Was just confused when you said you used the one in your hand for the shield

[@sassytroy8282]

Where I live the Rustoleum filler isn't available so had to buy Duplicolor and agreed at how well it works but always best to warm it in water for 15 or so minutes first as it can be a bitch to spray on if not. Also, Bondo is a god send!

[@avabarbiesquad]

Another Great video!, where we're you grabbing your paints when you were over here in England?

[@FranklyBuilt]

Homebase

[@avabarbiesquad]

Thank you. I was looking at Amazon, but not great

[@richardbennett8678]

I'm going to finally get back into modeling. I've started my journey into 3d printing. So I am asking you for suggestions on airbrushes, acrylic paint companies. I want to paint with candies, metallic, and oh yea every day colors.

[@rocketadmincy6255]

Does the ender 5 plus use the 4.2.7 silent board?

[@fsfazekas]

Hey Frank, another great video. Have a question - Most of your cosplay/armor work has been FDM but I know you have that Epax 156 kickin' around...any thoughts on FDM vs resin armor/cosplay..in terms of durability, weight, etc? Apologies if you've discussed that somewhere and I just haven't seen it. Thank you for your service!

[@FranklyBuilt]

The price and time and durability of it would be unreal. Resin is great for display stuff and small details

[@piperlove2290]

Quick question. What do you think about the matte filament? It’s supposed to help knock down the lines. Less odor. Thoughts on it?

[@FranklyBuilt]

It really doesn’t do either of those things. Lines come from the printer and proper temp in relation to the filament. Matte filament doesn’t reflect light as much so it LOOKS like they have less lines.

[@piperlove2290]

@@FranklyBuilt thank you! Learning so much from you and I appreciate you sharing your knowledge!

[@hibiki2175]

You can combine rust oleum, dupli color, and krylon spray paint brands together?

[@FranklyBuilt]

Yep. Just takes testing

[@doctorouroboros]

Are you also in the Air Force?? W. Now I know I'm getting my sources from integral sources xD

[@applepie3597]

Do the layers line have to be completely gone? As in not visible for the eyes? Because i' sanding my PLA and it feels reel smooth, yet i can still see the line.

[@FranklyBuilt]

Prime it more

[@heroic3darts449]

Have you thought about using UV resin? I used to use car body filler or wood filler and it took me days If not weeks to get a smooth finish, I switch to uv resin I brush it on with a chip brush (wet it first to get loose strands off then leave to dry) then used a palm sander with 240grit and it’s smooth with about half hour of sanding

[@TheBuffNerd-ji7dt]

Another awesome vid as always dude! Just one question: Do you think a MetalCast tint would work over a graphite rub and create a really shiny metallic finish?

[@FranklyBuilt]

Probably not honestly

[@TheBuffNerd-ji7dt]

@@FranklyBuilt Darn. Thanks anyways man!

[@Tylorboland100]

I bought the same metallic red you have for my red hood helmet. I'm in the sanding stage and I want it to look as close to a matte candy apple red, any recommendations for a base coat? I don't want any shine to it

[@FranklyBuilt]

Gold or silver base coat for sure but the matte look comes from the clearcoat you used

[@Tylorboland100]

@@FranklyBuilt my brother suggested a matte clear coat too. Thanks!

[@ily-yv2sg]

Hey frank! Great video (as always)! Are you planning on making a video about motorising a helmet using coding and not smoking systems?

[@FranklyBuilt]

Yep!

[@_maxize_7095]

Brooo this video is so helpful but I've run into an issue whenever I print eventually the filliment just stops coming out or the leaders will be far apart and very weak

[@AwesomeorTossem]

In the video you mentioned that the clear coat worked on everything pretty well except for the chrome spray paint. Is this true with the 1K clear coat also or were you just talking about the perfect match clear coat?

[@FranklyBuilt]

Yeah I never got it to work with chrome either

[@AwesomeorTossem]

@@FranklyBuilt Okay, I might have to use gold then. Thanks for the fast reply.🙂

[@DanCounihan]

If I have damaged the paint on an Ironman helmet. What is the process to fix this?

[@paullee6246]

Hello frank I am thinking about getting a ender 3 max do u know if they r any good

[@Dayquan_Bonqweeqwee]

Is it your first printer or your you’ve owned one before?

[@paullee6246]

@@Dayquan_Bonqweeqwee I have a ender 3 now

[@Dayquan_Bonqweeqwee]

@@paullee6246 well if this isn’t your first printer and you know how to work the one you already have then yeah go for it. As long as you have the money and yes they are pretty good. Every printer is a tiny bit different but the ender 3 max is a really good printer… hope that answered your question 😄

[@user-ss6db7fq1y]

frank looks like a chad with this haircut

[@FranklyBuilt]

I mean I’m in the military lol and I’ve had this haircut for years so lol

[@vincediesil]

Have you added the 1K clear to your Amazon store/ list? That stuff looks incredible!

[@vincediesil]

I only see the MATTE version on it.

[@FranklyBuilt]

I can’t find it in Amazon I’m sorry . Try auto parts stores

[@vincediesil]

@@FranklyBuilt No problem, just wanted to buy it thru your store to help support your channel :)

[@Simply-Bob]

They’ve discontinued that rust oleum line in the uk

[@rolandmine6693]

I’m trying to make a full metal automated iron man mk3 suit with all weapons included I’ll update in 6 months

[@Not_you326]

Can you put one of your Iron Man helmet templates in the comments because I can’t find one for my 3-D printer and I have a enter 3 pro

[@FranklyBuilt]

Thingiverse has hundreds and or they’re linked in all my build videos

[@lukedugan6213]

Do you know a good place to buy a red hood helmet?

[@FranklyBuilt]

I really like Do3ds

[@lukedugan6213]

Ok I’ll check them out

[@abovebeyondcreations1346]

We need a star boost suit update.

[@blainevantine1634]

What about matte colors?

[@Pidgeonstudio000]

How can u see through ur mandalorian mask? Or cant u see out of it?

[@chase1304]

here me out,winter soilder arm,i know it a stretch but it would be cool

[@supermomandj]

Every time I feel that I’m finally understanding all this, you release one of these videos making me feel clueless again.

[@supermomandj]

Like I couldn’t even imagine getting a helmet at your quality in a day. Id spend a month minimum on like the hand piece you displayed.

[@FranklyBuilt]

Man don’t worry about others haha it’ll just slow you down, worry about you and go at your own pace

[@gangster6229]

What paint did you use on your iron man helmet

[@FranklyBuilt]

It’s shown in the video 😅

[@anguswolfelliott5821]

have you ever made a guyver bio sute?

[@juerantrex124]

How much do 3D printer filaments cost you?

[@FranklyBuilt]

Anywhere from $10-20 a roll

[@nifco1290]

Id be more interested in how you cut off the supports and the nitty gritty of that level of stuff.

[@nifco1290]

I say this selfishly cause I just did a print where I’m having a lot of issues getting supports off. I’d love to know what tools you use, how you keep things sharp or if there is a moment when it’s cheaper to just buy a new set of snips etc

[@total_anomaly]

Not missing the cans of Spray Putty then? :-p

[@FranklyBuilt]

Not as much as I thought I would!

[@thekermitshowonbudget6630]

Hi frank

[@chaoschaos-oy7qo]

Honestly, I thought the splotches on the damaged shield were intended.

[@darragh9821]

Can i buy a mando 1

[@THEE_Real_Joker]

Hey, so I just got a V2, and now I’m confused on the voltage, I’m in America

[@FranklyBuilt]

115v

[@THEE_Real_Joker]

@@FranklyBuilt tysm, I find your videos highly informative for newcomers to the 3D printing world, such as myself

[@THEE_Real_Joker]

@@FranklyBuilt do I slide the red thing torward the 115v or away from it?

[@FranklyBuilt]

So it reads 115

[@garrywaters7190]

in my experience using krylon over most other paints doesn't work it has a habit of eating the other paint.

[@mattwestrick6088]

Saying a clear coat isn't recommended doesn't sound like a lie. They probably just assume the average customer isn't going to test 10 different clear coats to find one that works. Not recommended does not mean it's impossible.