I hate clickbait as much as the next guy, but this WILL NOT disappoint. The car is SO much better looking on the new rollers. Thumbs up if you agree!!
@dachurl874 жыл бұрын
I think the black rims look better on the vette.
@Greenlightfilming4 жыл бұрын
You arent the first person to say that. I'll be putting the black wheels back on it for sure
@abbas6743 жыл бұрын
What size are the fronts.
@bdunn143 жыл бұрын
@Morning star Garage Factory by far are the best but these don't look too bad.
@theforerunners51713 жыл бұрын
What size are the tires?
@shannonsisk3 жыл бұрын
It’s really hard to find a smaller car channel that doesn’t just focus on making everything turbo drag car. This is a great channel with great editing. Also both dream cars lol. I have the WS6 but haven’t gotten a C6Z. That one is next
@Greenlightfilming3 жыл бұрын
Hey thanks! that's very kind of you to say, I appreciate it. The C6Z was great. Totally awesome car.
@batsweezy4 жыл бұрын
I made the jump to 18" wheels several years ago and like yours, it changed the attitude of the look 100%. Very nice.
@Greenlightfilming4 жыл бұрын
18"s really are the way to go on these. If a guy is on the 17/18 fence just go 18.
@Wreckz_Tea2 жыл бұрын
Normally I'm not easily impressed by wheels, but holy crap I'm sitting here acting the same way you are in the video. Over here acting like I just put new wheels on my car the way I'm fanboying right now. And I never really care for chrome at all. They set your car off though
@Greenlightfilming2 жыл бұрын
I'm still a big fan. They are a killer wheel on these cars.
@paceta803 жыл бұрын
Gorgeous Trans Am and awesome wheels.
@chuckpatrick99264 жыл бұрын
Looks amazing on yours. The pewter color with the welds is perfect. I like the look of my old style weld draglites on my black ws6. The full polished aluminum looks good against the fully black paint
@Greenlightfilming4 жыл бұрын
Thanks man, I agree it's a killer look. Pewter isnt my top pick for color, but the wheels really set it off!
@jrbird7571 Жыл бұрын
My `99 with 390,000. miles on the clock still has the factory 16"s. I've been on the fence about what to do on my soon to be next set of tires. After seeing this I'm definitely going staggered with some 17" 275s up from and 17" 315s in the rear. Just want to make sure to get the offset right! Thanks for the video!
@Greenlightfilming Жыл бұрын
Sweet, thanks for checking the video out. Good luck on your wheel search! You have a MOUNTAIN of miles on your '99 ha
@elr4562 жыл бұрын
It’s also the colors. The chrome and black of the wheels pairs SO WELL with the black and grayish color of the body of the car.
@martiniusetihw4 жыл бұрын
Ohhh brother!!!!!! That is sick!!!!!! They really Change the attitude of the car!!! You hit a home run with this one. Where you able to leave the garage that first night?? Lol🤣😂🤣
@Greenlightfilming4 жыл бұрын
Haha yeah I had a hard time leaving it that night. What a major change on the car!
@65mikestang4 жыл бұрын
The new rims/tires look great!
@Greenlightfilming4 жыл бұрын
Thanks bud
@raymondsampsell83813 жыл бұрын
What is the actual full dimensions on your s71 wheel front & rear 18x? Front 18x? Rear & what is the back space on front & rear wheels? Thank you
@billyb6743 Жыл бұрын
Can you please tell me what you have for shocks struts and springs? I’ve got the same wheels and car and having a tough time finding what’s perfect for a drop…same exact offsets as you have. I’ve watched more than a few of ur videos in the last few days and I just can’t find it…is it Strano springs with koni front struts and rear shocks? Assuming there only one set of springs he sells? Thanks man. Just wanna get the right stance on it.
@donaldcurtis92294 ай бұрын
I have a set of holding commodores on my 97 formula 19 inch.Never saw another pair just continued in two thousand eighteen
@Highlander1432 Жыл бұрын
Beautiful setup Great video Dialing in wheel/suspension can be a chore
@Greenlightfilming Жыл бұрын
Absolutely. These wheels/fitment are perfect on a lowered fbody
@michaelcooper14312 жыл бұрын
Enjoyed that fbody! Well done.
@thomaswiberg14066 ай бұрын
Looks so good! What size tires Did you use? F.body greetings from a Z28-druver in Sweden!
@michaelleto64183 жыл бұрын
TA LOOKS AWESOME!!!!!!!! I have a 1998 TA Looking for a set of wheels. I agree welds are a lot of money and cosmis are a nice wheel too At a cheaper cost. So your running 295/30/18 front/315/30/18 rear. You said the fronts are 18x10 front but never said the rear I am assuming 18x11 rear??. What is your offset on front and rear?. I heard 888 are extremely hard to find now since the summer is coming around. 888 are the best in reviews out there But nitto 555 are pretty good also. Thanks man
@michaelleto64183 жыл бұрын
I just seen your offsets Thanks again
@Greenlightfilming3 жыл бұрын
Good deal, glad you found the info good luck on your search for your TA
@kareemrichards86354 жыл бұрын
Wow nice choice, great wheels on the TA captain!
@Greenlightfilming4 жыл бұрын
Thanks man, hard to pick a better wheel than these.
@highoctanegames2 жыл бұрын
9:08 I noticed how close the wheel and tire is to the back part of the fender, how many inches is that gap? Because i kinda have some regular street tires on my F-body that the dealership threw on, (which are 235 width, 60 aspec ration and 16in rim) and I have about an inch of room and I'm not sure if I should consider getting 17 or 18 inch rims. Because I want to try to get decent fitment without having to realign too many things if possible (Also sorry if I speak weirdly or unclearly, I'm all new to wheel fitment and all)
@michaelwallace47033 жыл бұрын
Looks great!!! Thanks for sharing. Now I want to change the direction I was going in. Just to verify and my apologies if you’ve mentioned this already, did you roll the rear fenders or do any fitment mods for the rear wheels? Thanks !!
@michaelm33814 жыл бұрын
You did good. Congrats!
@Greenlightfilming4 жыл бұрын
Thanks man, appreciate it!
@spange_babs91304 жыл бұрын
i run prostar chromes on my 95, 15x10 in the rear and 15x7 up front. More of a muscle car/ drag look and I love it
@Greenlightfilming4 жыл бұрын
Very popular look. Can fit a lot more sidewall under the back! I dig it.
@alicehowington35263 жыл бұрын
what BS to you have on the rear, also tire size?
@clos23784 жыл бұрын
TA looking hot!! Congrats!
@Greenlightfilming4 жыл бұрын
Thanks bud
@TheAMVDJ4 жыл бұрын
Awesome wheels man, congrats!! Those are my favorite wheels for a Trans Am. Hey, when you re-center your rear with the panhard bar will you make a video on how to do it? There seems to be no videos are instructions out there on how to do this.
@Greenlightfilming4 жыл бұрын
Sure, I'll make sure to at least add it into another video if I dont make one just about it.
@transam45554 жыл бұрын
kzbin.info/www/bejne/rWnNoKhoeaybm80
@transam45554 жыл бұрын
I love those wheels and now that you put those on that pewter gray Trans Am I think that I'll go that route, have the same car as yours, automatic though
@dachurl874 жыл бұрын
Looks great man!
@Greenlightfilming4 жыл бұрын
Thanks man. It's a killer setup
@marvinvonrenchler4832 Жыл бұрын
You said re align the rear a bit--I dont understand---is it now off center? How did you do it? My WS6 w wide tires keep slashing the inside of the tires on the bump stop pads.
@trevonwilson12 жыл бұрын
I found a pair of 18 ×10.5 weld S 71 with a 7.6" back space high pad. Will the rear wheels have the same look as yours?
@anthonyciarrocca1064 жыл бұрын
Perfect look. Your car is sweet but those wheels totally do it justice!
@Greenlightfilming4 жыл бұрын
Thanks bud, loving them still!!!
@wallzWs64 жыл бұрын
Love em! They’re the ones I’m saving for. Congratulations 👍
@Greenlightfilming4 жыл бұрын
Its worth it for sure! This is the best mod I've done to the car yet.
@keilylmm63774 жыл бұрын
@@Greenlightfilming hi my friend it's Keith with the project 94 Pontiac Trans am. Can you message me the backspacing on front and rear of them weld rims. But I'm going to be sticking with 17" rims for my bird.. 17x9.50 front and 17x11 in rear..
@z8marro2 жыл бұрын
Beautiful car! I looked through all the comments to see if someone has answered this question but no luck! Is your rear end narrowed or stock length of the original 10bolt?
@Greenlightfilming2 жыл бұрын
It's the stock length. Should be identical to a 10 bolt
@z8marro2 жыл бұрын
Thanks appreciate it
@brently2054 жыл бұрын
Those look so awesome. Well done on the trade-up. I keep looking for a used set for my CETA. They really would modernize it, but keep the same style with the chrome lip on black. I just don’t really want to bite the bullet on a new set... lol.
@Greenlightfilming4 жыл бұрын
Agreed man, and I was in same boat. I would have never bought them new. Way too much $$$. Keep your eyes peeled. Used sets are out there!
@williammercer69054 жыл бұрын
They are beautiful, night and day!
@Greenlightfilming4 жыл бұрын
Thanks man, it's a huge upgrade!
@chriscal8201 Жыл бұрын
I have Camaro wheels that has 245/45/16 tires and I’m using the Camaro wheels on a 97 firebird. Do you know how wide a tire I can go with the 16 inch wheels?
@xxchugchugxx4204 жыл бұрын
Very Nice Wheel choice Dayummmm !! Don't take them off the T/A . I'll bet that was a fun ride , Love that car !
@Greenlightfilming4 жыл бұрын
Sure was a fun ride. I had to try them on the Z for a few days. Interesting look but I'm swapping the fronts back
@martiniusetihw3 жыл бұрын
I just asked you for this info...and I just found it. 😂
@Greenlightfilming3 жыл бұрын
Good deal 👍
@transam45554 жыл бұрын
Looks awesome perfect backspacing on all four corners.. keep on rocking that TA, very few in that good of a shape out there these days
@Greenlightfilming4 жыл бұрын
Got that right man. The wheel setup is perfect fitment on these cars. Thinking I'll have the car for the long haul!
@Couch_engineer4 жыл бұрын
Looks sick man.
@Greenlightfilming4 жыл бұрын
Thanks, it's the wheels! They make any turd look good lol
@bnrz283 жыл бұрын
Awesome vid man those rts are sick New sub
@Greenlightfilming3 жыл бұрын
Sweet, thanks man! Appreciate it
@welintonpayano28544 жыл бұрын
New sub, looks great man.
@Greenlightfilming4 жыл бұрын
Thanks man, appreciate it!
@yuppppppl3 жыл бұрын
Great job my guy
@smokingasphalt80503 жыл бұрын
Can't go wrong with this setup. Nice fbody bro.
@Greenlightfilming3 жыл бұрын
It's been do many times, but it sure looks good lol. Thanks for checking out the video man!
@randylandfried62374 жыл бұрын
Nailed it!
@Greenlightfilming4 жыл бұрын
Thanks man
@thatotherguy76473 жыл бұрын
Just got a WS6 and looking to do the same wheel setup on my car. How much is your car lowered if you don’t mind me asking. Mine is 1” lower from stock
@Greenlightfilming3 жыл бұрын
It has a Summit Racing lowering spring kit. Think its 1" to 1.25".
@peterfenter88004 жыл бұрын
Those wheels look sweet especially with the color of the car. I have an 2002 black ws6, and personally I think I want the Miro 111 wheels, i just love the black on black look. If you haven't see the roads unraveled video titled "brutal 500 hp trans am ws6" it's a sweet car, basically everything I want to do to mine eventually
@Greenlightfilming4 жыл бұрын
I've seen that video probably 100 times lol. Legendary fbody stuff there, it's great. 500hp would be a good number to hit in an fbody.
@peterfenter88004 жыл бұрын
@@Greenlightfilming I'm at 400hp to the wheels right now with a texas speed 228r cam, and headers and exhaust. I think my next thing is going to be heads, and a rear end... I think I'm loosing some hp in the driveline, it's still stock, and there is quite a bit of play
@hotrodhootie4 жыл бұрын
Nice wheels i love the way it looks that's my dream car maybe one day i will have one.
@Greenlightfilming4 жыл бұрын
Trans Am's/Z28's are pretty affordable man. You can even finance them if need be! Could be in one for a couple hundred bucks a month of you wanted to and can swing it.
@jensenstreetcarsjeremy33754 жыл бұрын
looks awesome love that wheel
@Greenlightfilming4 жыл бұрын
You and me both bud lol
@joe00camaross3 жыл бұрын
That looks really nice! Beautiful setup!
@Greenlightfilming3 жыл бұрын
Thanks bud!
@joe00camaross3 жыл бұрын
@@Greenlightfilming off topic but do you like your Borla cat back? I have a 00 SS with BTR cam, trick flow heads, LS6 intake and ARH LT’s going through SLP CME but would like a little more aggressive sound. Your car sounds great!
@Greenlightfilming3 жыл бұрын
I like it, yes. It is a little loud on the highway but it sounds really good.
@jeffwilliams47884 жыл бұрын
Those rims are sweet on both cars.
@Greenlightfilming4 жыл бұрын
Thanks bud. They are hard to beat
@gameshark4273 жыл бұрын
Wow !! Perfect wheel combo 👍
@Greenlightfilming3 жыл бұрын
Thanks man, appreciate it! Weld makes great wheels
@MrBrandonLane2 жыл бұрын
I just bought a ws6 and love the wheel set up you got I was wondering if you could tell me the specs on them so I could order a set. Thanks I enjoy the channel.
@MrBrandonLane2 жыл бұрын
I know they are 18x10 and 18x11 but like med or high pad height and back spacing. Thanks again
@sucapizda4 жыл бұрын
Dude I just blew my load. LOL. What a stunner. You are right, these are the best looking wheel on a f body. You are lucky to get a deal like that. It would be hard to afford a brand new set with tires. And Im so glad you keep putting out WS6 content. I just love it. I have a couple of questions for you. What size of a restrictor are you running in your Borla muffler?? I just installed one on my 2002 and I have it wide open and its nasty loud. And If you don't mind me asking, what did the seller of the rims asking before your deal with him. I do have a eye on set of rims, and would like to know for comparison. Thanx bud.
@nicksgroi62872 жыл бұрын
Quick question! If I put on 18 rims and lower my TA with BMR springs 1.25 inch. Do you think they might rub? Side note it’s at stock ride height now with 18’.
@Greenlightfilming2 жыл бұрын
I wouldn't think so. You may have to clear your bump stops and the offset is important. Lots of info on ls1tech regarding fitment.
@mastap14772 жыл бұрын
I might have missed it but what are the wheel sizes and offset? I know the front are 18x10 but that’s all I gathered from the video. Car looks great BTW
@Greenlightfilming2 жыл бұрын
It's in the video at 02:00
@brettbrannon47754 жыл бұрын
Love the ws6, it’s why I joined the channel😁
@Greenlightfilming4 жыл бұрын
Thanks for the input. The car still has a home here
@brettbrannon47754 жыл бұрын
GreenLightFilming well hopefully she with u and this channel for years to come😁
@garystanaland19353 жыл бұрын
Looks totally awesome on it !!
@Greenlightfilming3 жыл бұрын
Thanks bud. I love it!
@yamahaguy17322 жыл бұрын
What are the wheel and tire specs and will they fit a stock car?
@scottmoseman58273 жыл бұрын
Do you think 295s on 18x10s would fit the rear without clearance issues? I want a square setup wider than 275s and hopefully with 18" wheels.
@Steven-rg4bo3 жыл бұрын
I’ve ran 18x10 square with 295s. Front rubs slightly at full lock. Rears fit fine I rolled the back to be safe.
@travisquintero83344 жыл бұрын
Those wheels really do look killer on the chicken... Randy please let us know if the tires rub on the fender wells... Lol... You can't stop staring at your car can ya😄
@Greenlightfilming4 жыл бұрын
No rubbing so far! Glad to be able to report that lol.
@kevincrawford6936 Жыл бұрын
I like the black wheels better on the Vette. And the Weld wheels look AWESOME on your TA
@LiveFast1000RR2 жыл бұрын
@greenlight I watched the whole video. Did I miss the backspace info for front and rear?
@Greenlightfilming2 жыл бұрын
Watch at 02:00
@derekperkins41413 жыл бұрын
Car looks awesome!! Do you think it would have any rubbing issues if you had like Eibach pro kit springs?
@Greenlightfilming3 жыл бұрын
Not too sure to be honest. If the spring rates and drop is similar I'd presume not.
@derekperkins41413 жыл бұрын
@@Greenlightfilming cool thank you .. how much of a drop does you’re car have ?
@zAvAvAz3 жыл бұрын
WOW looks tremendous! Paused at 3:51 !
@joshender96064 жыл бұрын
T/A looks sick with those Weld wheels.
@Greenlightfilming4 жыл бұрын
For sure. Hard to beat this wheel combo on an f-body
@rodriguezandres54 Жыл бұрын
Kinda of lug nuts did u use?also are u lowered 1.25 or 2 inches???
@Greenlightfilming Жыл бұрын
I just used whatever the parts store had on hand if I recall for wheels. The car is lowered 1.25".
@maldo724 жыл бұрын
Your right Those rims update the car 20 year ... love the look
@Greenlightfilming4 жыл бұрын
Thanks bud, appreciate it!
@devianb3 жыл бұрын
Weld RTS is the modern day TTII. Everyone has them and they look great.
@Greenlightfilming3 жыл бұрын
I agree 100%. Hopefully they stand the test of time like the TT2's. I think they will.
@shannonshepard50473 жыл бұрын
Looking good!
@Greenlightfilming3 жыл бұрын
Thanks!
@phillipjaques46403 жыл бұрын
You think with the front wheel would rub if you do the brembo 4 piston brake upgrade on the T/A thanks for any of your info.
@Greenlightfilming3 жыл бұрын
I wouldn't be sure either way. Still have the stock brakes on my car. There's a bit of room, but I'd hate to guess either way!
@phillipjaques46403 жыл бұрын
@@Greenlightfilming appreciate the info man thanks.
@phillipjaques46402 жыл бұрын
Hey bud I wanted to ask you if you torqued the wheels and what was the spec? Thanks
@mermaiddreams833 жыл бұрын
Great job, looks Sick man, I Personally like the f-body better, I have a 95 Trans Am myself that I really enjoy driving as well as wrenching on and making it faster!! New sub for sure!!
@Greenlightfilming3 жыл бұрын
If I had to keep one car out of all of them it would be the Fbody, hands down. Thanks for the sub. I appreciate it!! Good luck with your TA.
@krisrawk18173 жыл бұрын
Im sure you get asked this question often but what type of exhaust do you have on that beauty?
@Greenlightfilming3 жыл бұрын
Speed Engineering Longtubes & Offroad Y-Pipe into a Borla Catback
@reddlsx79793 жыл бұрын
Would that wheel setup fit for a stock 10 bolt 2002 f body camaro? Or is it too big
@Greenlightfilming3 жыл бұрын
It should. The axle housing is the same width on this car.
@panasonicchrome79153 жыл бұрын
Nice man 👍 This wheels fit like a gloves 😎 Have you spacers on?
@Greenlightfilming3 жыл бұрын
No spacers needed
@rmcmurray24 жыл бұрын
Perfect wheels on these cars. I need to hit the lottery to afford these wheels. By the time I get around to buying them, the price will increase another $50/rim lol
@Greenlightfilming4 жыл бұрын
Haha I hear you. People that can pick these up new are ballin out. Whew $$$
@donaldcurtis92294 ай бұрын
I like those wheels
@josemontano7767 Жыл бұрын
What a beauty and my favorite color too. A little to loud for my liking.
@jimbroderick48682 жыл бұрын
I didn’t hear if you said the new tire sizes for the the new wheels. Thanks
@Greenlightfilming2 жыл бұрын
I believe it's at 02:00 in the video
@brianbell69652 жыл бұрын
What exhaust do you have on it? Sounds good!
@Greenlightfilming2 жыл бұрын
Speed Engineering longtubes/y-pipe into a Borla catback
@taranknapp5561 Жыл бұрын
Was looking through then comments and couldnt find any info on the backspacing.
@Greenlightfilming Жыл бұрын
Look at 2:00 in the video
@JNunez19943 жыл бұрын
Would this fitment clear some brembos? 4 piston
@freddyj58452 жыл бұрын
Is there a cheaper version of these wheels? They look very nice!
@Greenlightfilming2 жыл бұрын
Nope. So far there's nothing like them "cheaper". There's a pretty good wheel company out there called "Cosmis Racing" that makes some good looking stuff that fits these cars.
@ericsotosoto3793 жыл бұрын
Awesome bro!
@Greenlightfilming3 жыл бұрын
Thanks man the wheels are killer!
@jeffr.63753 жыл бұрын
Those look sick, def worth the $$
@bhcamaro20023 жыл бұрын
Knew a guy that had them. He bought them new for $2200 😲
@mikeb69023 жыл бұрын
you think to get all 4 at 18x10 would still look good, i like the idea of rotating my tires, thanks
@Greenlightfilming3 жыл бұрын
I think it would look good. You are only talking about a difference of a 1/2 inch on each side of the wheel. It would be noticeable up close but not from afar. If you are wanting to be able to rotate you tires that's what you'll have to do anyways.
@mikeb69023 жыл бұрын
@@Greenlightfilming really love the look of those wheels
@dslilws62 жыл бұрын
I came across this video while looking for a car the same color as mine. I'm torn between the 71's and the 77's right now. I to have torque thrusts on my car currently :D not only am i torn between the two wheels but your video now makes me torn between going up to a 18" wheel or stay 17" Also noticed your a fellow wisconsinite! Badass car love the color tho i am biased :)
@Greenlightfilming2 жыл бұрын
It's a tough call man, hate to tell you ha. They will both look good at the end of the day. You should ask yourself if you want more function, or form. Choose your size accordingly.
@dslilws62 жыл бұрын
@@Greenlightfilming agreed I’ve got some time before I’ll have some extra funds for wheels but the choice is difficult 😆
@greenmachine28264 жыл бұрын
What are the rim and wheel specs? Love the videos btw. I haven been under a quarantine and I've been bing watching your videos.
@Greenlightfilming4 жыл бұрын
Thanks for checking out the videos, appreciate it! The specs are in the video... lol.
@punkinsgarageandpaint82994 жыл бұрын
That looks perfect!
@sweetdees864 жыл бұрын
Any idea if you could run a square set up? So basically 11 wide all around
@Greenlightfilming4 жыл бұрын
Not sure. Might be tough on the front end, I'd guess they might rub.
@farhanfarooqi71902 жыл бұрын
Man I got a pewter ws6 as well and was thinking about selling it but man it looks way better with those wheels on it. I may just have to keep it now and get the welds.
@Greenlightfilming2 жыл бұрын
The wheels really make the car. Love the S71's on an fbody.
@farhanfarooqi71902 жыл бұрын
@@Greenlightfilming idk if you saw but Weld came out with non forged ones called the Ventura and Laguna. The Ventura look like a copy of the s71. I'm thinking about getting those. Half the price it seems. I'm liking the 18" look for the street. I'm wanting to do a 18x10.5 all around. I like the square setup look. What size and offset are your welds?
@andrzejjurczak89604 жыл бұрын
Very nice...
@Greenlightfilming3 жыл бұрын
Thanks a lot
@Capcity443 жыл бұрын
Soooo dope!
@edwardlovato38773 жыл бұрын
What type of suspension r u running?
@Greenlightfilming3 жыл бұрын
Summit Racing lowering springs and Bilstein shocks
@derekperkins41413 жыл бұрын
You’ve made my mind up I’m going with these exact same wheels and dimensions !!!! What is the concavity/pad height I see this is asked when ordering a set
@Greenlightfilming3 жыл бұрын
Sweet, you'll love them. Info is at 2:07 in the video...
@derekperkins41413 жыл бұрын
@@Greenlightfilming ok thank you
@Greenlightfilming3 жыл бұрын
No problem. Hope you get the info you needed. Thanks for reaching out
@derekperkins41413 жыл бұрын
@@Greenlightfilming thank you and love the videos and the cars 👍🏻
@derekperkins41413 жыл бұрын
Well I won’t be getting the welds I was negotiating on a pewter 02 wS6 with 5800 miles and came across a 07 victory red c6 z06 with 1800 miles and I jumped on it 👍🏻
@maldo724 жыл бұрын
What are the back spacing specs for future reference
@Greenlightfilming3 жыл бұрын
Everything you should need to know is here: Fronts: 18x10 - High Pad +41mm - 7.1" Backspace - Toyo R888 295/30/18 Rears: 18x11 - Medium Pad +43mm - 7.7" Backspace - Toyo R888 315/30/18
@maldo723 жыл бұрын
@@Greenlightfilming awesome thank you....
@Greenlightfilming3 жыл бұрын
@@maldo72 no problem bud
@darwinstokes96962 жыл бұрын
Overtime have you ever noticed any rubbing
@Greenlightfilming2 жыл бұрын
Nope
@lionelsimien18733 жыл бұрын
Your new wheels or bad ass that looks 👌 really good 👍
@Greenlightfilming3 жыл бұрын
Thanks bud! Weld makes killer wheels
@ls1_cammeroh Жыл бұрын
Man I wish I could afford those welds.
@Greenlightfilming Жыл бұрын
They aren't cheap, that's for sure.
@matthewstansbury30474 жыл бұрын
I hear piston slap when you first started it to back it out lol. Mine does the same damn annoying thing
@Greenlightfilming4 жыл бұрын
Lol yep, mine does it for a short time. That and 100 exhaust leaks lol
@matthewstansbury30474 жыл бұрын
GreenLightFilming mine does it for a few minutes in the summer. But it sounds pretty horrible when it’s doing it lol. Between that and my exhaust leaks it sounds like I done spun a rod and stuffed a lifter when I first start it lol. From my xp the Mobil 1 0w-40 seems to get it a little quieter. The big cam and valve train it’s hard to really get it quiet. Then on top of it I have morel lifters and they are a little noisey. Good thing my Borla is loud lmao. Love your vids of the ws6.
@NeoDaOriginal4 жыл бұрын
I see fbody... I sub
@cammedam52304 жыл бұрын
Enjoy polishing them after giving the car a bath. Love my welds. Hate polishing them.
@Greenlightfilming4 жыл бұрын
Haha you are probably right. They look killer when they are clean. So far so good!
@cammedam52304 жыл бұрын
@@Greenlightfilming yes they do i always get compliments on mine and how they look. Really sets off the car.
@dlm94773 жыл бұрын
Speaking of dated, has anyone taken notice that the Camaro of the same years look so old now? But the firebird/TA has held up well.